| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/jpeg: set no_user_fence for JPEG v4.0 ring
JPEG rings do not support 64-bit user fence writes, reject CS
submissions with user fences.
(cherry picked from commit 8d0cac9478a3f046279c657d6a2545de49ae675a) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/jpeg: set no_user_fence for JPEG v4.0.5 ring
JPEG rings do not support 64-bit user fence writes, reject CS
submissions with user fences.
(cherry picked from commit f05d0a4f21fc720116d6e238f23308b199891058) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: add wcid publish check in mt76_sta_add
Since mt7925_mac_sta_add publishes wcid, add publish check in mt76_sta_add
to avoid reinitializing the wcid->poll_list.
Found dev->sta_poll_list corruption when using mt7925 and 7.1-rc4.
According to the corruption information, prev->next was changed to itself.
wlan0: disconnect from AP 90:fb:5d:94:8b:e3 for new auth to 90:fb:5d:94:8b:e2
wlan0: authenticate with 90:fb:5d:94:8b:e2 (local address=84:9e:56:9c:7e:6b)
wlan0: send auth to 90:fb:5d:94:8b:e2 (try 1/3)
slab kmalloc-8k start ffff8c80958a6000 pointer offset 4160 size 8192
list_add corruption. prev->next should be next (ffff8c808a7488f8), but was ffff8c80958a7040. (prev=ffff8c80958a7040).
mt76_wcid_add_poll+0x95/0xd0 [mt76]
mt7925_mac_add_txs.part.0+0xa5/0xe0 [mt7925_common]
mt7925_rx_check+0xa7/0xc0 [mt7925_common]
mt76_dma_rx_poll+0x50d/0x790 [mt76]
mt792x_poll_rx+0x52/0xe0 [mt792x_lib] |
| In the Linux kernel, the following vulnerability has been resolved:
mac802154: llsec: add skb_cow_data() before in-place crypto
llsec_do_encrypt_unauth(), llsec_do_encrypt_auth(),
llsec_do_decrypt_unauth(), and llsec_do_decrypt_auth() all perform
in-place cryptographic transformations on skb data. They build a
scatterlist with sg_init_one() pointing into the skb's linear data area
and then pass the same scatterlist as both src and dst to the crypto API
(e.g. crypto_skcipher_encrypt/decrypt, crypto_aead_encrypt/decrypt).
On the RX path, __ieee802154_rx_handle_packet() clones the received skb
before handing it to each subscriber via ieee802154_subif_frame(). The
cloned skb shares the same underlying data buffer via reference
counting. When llsec_do_decrypt() subsequently modifies this shared
buffer in place, it corrupts data that other clones -- potentially
belonging to other sockets or subsystems -- still reference.
On the TX path, similar data sharing can occur when an skb's head has
been cloned (skb_cloned() returns true).
The fix is to call skb_cow_data() before performing any in-place crypto
operation. skb_cow_data() ensures that the skb's data area is not
shared: if the skb head is cloned or the data spans multiple fragments,
it copies the data into a private buffer that can be safely modified in
place. This is the same pattern used by:
- ESP (net/ipv4/esp4.c, net/ipv6/esp6.c)
- MACsec (drivers/net/macsec.c)
- WireGuard (drivers/net/wireguard/receive.c)
- TIPC (net/tipc/crypto.c)
Without this guard, in-place crypto on shared skb data leads to:
- Silent data corruption of other skb clones
- Use-after-free when the crypto API scatterwalk writes through a
page that has already been freed by another clone's kfree_skb()
- Kernel crashes under concurrent 802.15.4 traffic with security
enabled (KASAN/KMSAN reports slab-use-after-free)
Found by 0sec (https://0sec.ai) using automated source analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix dead ACL conflict guard in nfsd4_create
nfsd4_create() steals create->cr_dpacl/cr_pacl into the local
nfsd_attrs via the designated initializer, then immediately sets the
source pointers to NULL. The subsequent conflict guard tests the
already-nilled source fields, making it permanently dead code:
if (create->cr_acl) {
if (create->cr_dpacl || create->cr_pacl) /* always false */
When a client encodes both FATTR4_WORD0_ACL and
FATTR4_WORD2_POSIX_{DEFAULT,ACCESS}_ACL in the same CREATE fattr
bitmap, nfsd4_acl_to_attr() overwrites attrs.na_pacl/na_dpacl without
releasing the originals, leaking two posix_acl slab objects per
request. Repeated requests cause unbounded slab exhaustion.
Fix by checking attrs.na_dpacl/na_pacl (the stolen values) instead of
the nilled create->cr_dpacl/cr_pacl, matching the correct pattern
already used in nfsd4_setattr(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/tcp-ao: fix use-after-free of key in del_async path
In tcp_ao_delete_key(), the del_async path skips the current_key
and rnext_key validity checks present in the synchronous path,
assuming these pointers are always NULL on LISTEN sockets. However,
if a key was added with set_current=1/set_rnext=1 while the socket
was in CLOSE state, current_key and rnext_key will be non-NULL
after listen() transitions the socket to LISTEN.
When such a key is deleted with del_async=1, hlist_del_rcu() and
call_rcu() free the key without clearing the dangling pointers.
After the RCU grace period, getsockopt(TCP_AO_INFO) dereferences
current_key->sndid and rnext_key->rcvid from freed slab memory.
Clear current_key and rnext_key in the del_async path when they
reference the key being deleted. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: re-lock request before replacing page cache folio
fuse_try_move_folio() unlocks the request on entry but does not
re-lock it on the success path. This means fuse_chan_abort() can end the
request and free the fuse_io_args (eg fuse_readpages_end()) while the
subsequent copy chain logic after fuse_try_move_folio() accesses the
fuse_io_args, leading to use-after-free issues.
Fix this by calling lock_request() before replace_page_cache_folio().
This ensures the request is locked on the success path which will
prevent the fuse_io_args from being freed while the later copying logic
runs, and also ensures that the ap->folios[i]->mapping is never null
since ap->folios[i] will always point to the newfolio after
replace_page_cache_folio(). |
| In the Linux kernel, the following vulnerability has been resolved:
virtiofs: fix UAF on submount umount
iput() called from fuse_release_end() can Oops if the super block has
already been destroyed. Normally this is prevented by waiting for
num_waiting to go down to zero before commencing with super block shutdown.
This only works, however, for the last submount instance, as the wait
counter is per connection, not per superblock.
Revert to using synchronous release requests for the auto_submounts case,
which is virtiofs only at this time. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: zero-initialize GART table on allocation
GART TLB is flushed after unmapping but not after mapping. Since
amdgpu_bo_create_kernel() does not zero-initialize the buffer, when a
single PTE is written the TLB may speculatively load other uninitialized
entries from the same cacheline. Those garbage entries can appear valid,
and a subsequent write to another PTE in the same cacheline may cause the
GPU to use a stale garbage PTE from the TLB.
Fix this by calling memset_io() to zero-initialize the GART table with
gart_pte_flags immediately after allocation.
Using AMDGPU_GEM_CREATE_VRAM_CLEARED, SDMA-based clear will not work
since SDMA needs GART to be initialized to work.
(cherry picked from commit d9af8263b82b6eaa60c5718e0c6631c5037e4b24) |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix fsck inconsistency caused by incorrect nat_entry flag usage
f2fs_need_dentry_mark() reads nat_entry flags without mutual exclusion
with the checkpoint path, which can result in an incorrect inode block
marking state. The scenario is as follows:
create & write & fsync 'file A' write checkpoint
- f2fs_do_sync_file // inline inode
- f2fs_write_inode // inode folio is dirty
- f2fs_write_checkpoint
- f2fs_flush_merged_writes
- f2fs_sync_node_pages
- f2fs_fsync_node_pages // no dirty node
- f2fs_need_inode_block_update // return true
- f2fs_fsync_node_pages // inode dirtied
- f2fs_need_dentry_mark //return true
- f2fs_flush_nat_entries
- f2fs_write_checkpoint end
- __write_node_folio // inode with DENT_BIT_SHIFT set
SPO, "fsck --dry-run" find inode has already checkpointed but still
with DENT_BIT_SHIFT set
The state observed by f2fs_need_dentry_mark() can differ from the state
observed in __write_node_folio() after acquiring sbi->node_write. The
root cause is that the semantics of IS_CHECKPOINTED and
HAS_FSYNCED_INODE are only guaranteed after the checkpoint write has
fully completed.
This patch moves set_dentry_mark() into __write_node_folio() and
protects it with the sbi->node_write lock. |
| Statamic is a Laravel and Git powered content management system (CMS). Prior to 5.73.24 and 6.20.1, form submission values in src/Forms/Exporters/CsvExporter.php were not neutralized for spreadsheet formula characters when exported to CSV. A submission containing a value beginning with a formula trigger character, such as =, +, -, or @, could be interpreted as a live formula when a Control Panel user opens the export in a spreadsheet application. Form submissions can come from unauthenticated front-end visitors, so the malicious value can be supplied by an anonymous user and is later triggered by an editor opening the export. This issue is fixed in versions 5.73.24 and 6.20.1. |
| IBM Langflow OSS 1.0.0 through 1.10.1 Langflow could allow an authenticated user to execute arbitrary commands with elevated privileges on the system due to improper validation of user supplied input in the Python Interpreter component. |
| A vulnerability was found in zevorn rt-claw up to 0.2.0. Affected is the function claw_net_get/claw_net_post of the file claw/services/tools/net.c of the component http_request. The manipulation results in information disclosure. The attack can be executed remotely. The exploit has been made public and could be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A heap buffer overflow vulnerability exists in the DTLS handshake fragment reassembly logic of GnuTLS. The issue arises in merge_handshake_packet() where incoming handshake fragments are matched and merged based solely on handshake type, without validating that the message_length field remains consistent across all fragments of the same logical message. An attacker can exploit this by sending crafted DTLS fragments with conflicting message_length values, causing the implementation to allocate a buffer based on a smaller initial fragment and subsequently write beyond its bounds using larger, inconsistent fragments. Because the merge operation does not enforce proper bounds checking against the allocated buffer size, this results in an out-of-bounds write on the heap. The vulnerability is remotely exploitable without authentication via the DTLS handshake path and can lead to application crashes or potential memory corruption. |
| A flaw in GnuTLS DTLS handshake parsing allows malformed fragments with zero length and non-zero offset, leading to an integer underflow during reassembly and resulting in an out-of-bounds read. This issue is remotely exploitable and may cause information disclosure or denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Remove latent out-of-bounds access in IOMMU debugfs
In iommu_mmio_write() and iommu_capability_write(), the variables
dbg_mmio_offset and dbg_cap_offset are declared as int. However, they
are populated using kstrtou32_from_user(). If a user provides a
sufficiently large value, it can become a negative integer.
Prior to this patch, the AMD IOMMU debugfs implementation was already
protected by different mechanisms.
1. #define OFS_IN_SZ 8 ensures the user string <= 8 bytes, so
e.g. 0xffffffff isn't a valid input.
if (cnt > OFS_IN_SZ)
return -EINVAL;
2. Implicit type promotion in iommu_mmio_write(), dbg_mmio_offset is int
and iommu->mmio_phys_end is u64
if (dbg_mmio_offset > iommu->mmio_phys_end - sizeof(u64))
return -EINVAL;
3. The show handlers would currently catch the negative number and
refuse to perform the read.
Replace kstrtou32_from_user() with kstrtos32_from_user() to parse the
input, and check for negative values to explicitly prevent out-of-bounds
memory accesses directly in iommu_mmio_write() and
iommu_capability_write(). |
| In the Linux kernel, the following vulnerability has been resolved:
sysfs: don't remove existing directory on update failure
When sysfs_update_group() is called for a named group and create_files()
fails (e.g. -ENOMEM), internal_create_group() calls kernfs_remove(kn) on
the group directory. In the update path, kn was obtained via
kernfs_find_and_get() and refers to a directory that already existed
before this call. Removing it silently destroys a sysfs group that the
caller did not create.
Only remove the directory if we created it ourselves. On update failure
the directory remains as it is left empty by remove_files() inside
create_files(), but can be repopulated by a retry. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers/base/memory: fix memory block reference leak in poison accounting
memblk_nr_poison_inc() and memblk_nr_poison_sub() look up a memory block
via find_memory_block_by_id(), which acquires a reference to the memory
block device.
Both helpers use the returned memory block without dropping that
reference, leaking the device reference on each successful lookup. Drop
the reference after updating nr_hwpoison. |
| In the Linux kernel, the following vulnerability has been resolved:
phonet/pep: disable BH around forwarded sk_receive_skb()
The networking receive path is usually run from softirq context, but
protocols that take the socket lock may have packets stored in the
backlog and processed later from process context. In that case
release_sock() -> __release_sock() drops the slock with spin_unlock_bh()
and then calls sk->sk_backlog_rcv() with bottom halves enabled.
Typical sk_backlog_rcv handlers process the socket whose backlog is
being drained, so the BH state at entry is irrelevant for the slocks
they touch. pep_do_rcv() is different: when the inbound skb targets an
existing PEP pipe, it forwards the skb to a different *child* socket
via sk_receive_skb(). That helper takes the child slock with
bh_lock_sock_nested(), which is just spin_lock_nested() and assumes BH
is already off. The same child slock therefore ends up acquired with
BH on (process path) and with BH off (softirq path):
process context softirq context
--------------- ---------------
release_sock(listener) __netif_receive_skb()
__release_sock() phonet_rcv()
spin_unlock_bh() __sk_receive_skb(listener)
[BH now ENABLED] [BH already disabled]
sk_backlog_rcv: sk_backlog_rcv:
pep_do_rcv() pep_do_rcv()
sk_receive_skb(child) sk_receive_skb(child)
bh_lock_sock_nested(child) bh_lock_sock_nested(child)
=> SOFTIRQ-ON-W => IN-SOFTIRQ-W
Lockdep flags this as inconsistent lock state, and it can become a real
self-deadlock if a softirq on the same CPU tries to receive to the same
child socket while its slock is held in the BH-enabled path:
WARNING: inconsistent lock state
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
(slock-AF_PHONET/1){+.?.}-{3:3}, at: __sk_receive_skb+0x1cf/0x900
__sk_receive_skb net/core/sock.c:563
sk_receive_skb include/net/sock.h:2022 [inline]
pep_do_rcv net/phonet/pep.c:675
sk_backlog_rcv include/net/sock.h:1190
__release_sock net/core/sock.c:3216
release_sock net/core/sock.c:3815
pep_sock_accept net/phonet/pep.c:879
Wrap the forwarded sk_receive_skb() in local_bh_disable() /
local_bh_enable() so the child slock is always acquired with BH off.
local_bh_disable() nests safely on the softirq path.
Discovered via in-house syzkaller fuzzing; the same root cause also
on the linux-6.1.y syzbot dashboard as extid 44f0626dd6284f02663c.
Reproduced under KASAN + LOCKDEP + PROVE_LOCKING, reproducer:
https://pastebin.com/A3t8xzCR |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: tegra: fix pm_runtime leak on mutex_lock failure
If tegra_i2c_mutex_lock() fails, the function returns without calling
pm_runtime_put(), leaking the runtime PM reference acquired by the
preceding pm_runtime_get_sync(). This prevents the device from ever
entering runtime suspend.
Add the missing pm_runtime_put() before returning on lock failure. |
