| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Temporal Server compiles a Worker Controller Instance module, go.temporal.io/auto-scaled-workers, into its Worker Service, and that module registers a compute provider named k8s whose function is to manage workers running in a Kubernetes cluster. The k8s provider built its Kubernetes client from the client configuration supplied in the caller's request rather than from operator configuration, and building and using that client could run a command of the caller's choosing on the Worker Service host, under the account the server process runs as. Two frontend operations reach the provider. CreateWorkerDeploymentVersion requires a namespace write role. ValidateWorkerDeploymentVersionComputeConfig is registered as a read-only namespace operation, so an authenticated caller holding only a read role in a single namespace can reach the provider through it, and that route does not require a worker deployment to already exist. Execution happens while the submitted configuration is validated, so no scaling decision, task arrival, or unusual request sequence is required. Because the Worker Service process holds the persistence credentials for every namespace in the cluster and the cluster's TLS material, the consequence reaches beyond the caller's namespace to the cluster as a whole. The provider is present in the official temporal-server binaries and container images for the affected releases. The control that keeps it unreachable is the compute provider allowlist, the dynamic configuration setting workercontroller.compute_providers.enabled. On Temporal Server 1.31.0 through 1.31.2 that allowlist does not deny by default: when the setting is unset the check is skipped and every registered compute provider is permitted, k8s included, so a stock deployment of those releases is exposed. On 1.31.3 and later 1.31 releases, and on 1.32.0 and later 1.32 releases, the allowlist denies by default, and a deployment is exposed only where k8s has been added to it. The 1.30 release line does not include the Worker Controller Instance module and is unaffected. To determine whether a deployment is affected, check the following together. The deployed Temporal Server version is in an affected range. The Worker Service is running, which it is in the default service set and therefore in a stock deployment. The effective value of workercontroller.compute_providers.enabled contains k8s, or, on 1.31.0 through 1.31.2 only, is unset; check both the global value and every namespace-constrained override, because an override can add k8s for a single namespace. And authorization is configured, meaning a real authorizer and claim mapper are in place; a deployment running with no authorizer already grants every caller unrestricted access to every namespace, so it has no namespace boundary for this to cross. Deployments that use a custom authorizer should also check whether it permits ValidateWorkerDeploymentVersionComputeConfig to callers without namespace write access. The separate per-namespace dynamic configuration setting workercontroller.enabled does not gate the affected path on any affected release. |
| Flowise through 3.1.4 contains a sandbox escape vulnerability that allows authenticated users to execute OS commands by abusing allowlisted langchain and mammoth modules when ALLOW_BUILTIN_DEP=true. Attackers can submit JavaScript to /api/v1/node-custom-function that writes a file into the mammoth package via LocalFileStore and requires it, escaping vm2 as the Flowise process user. |
| A weakness has been identified in oretnom23 php-travel-agency-system. The affected element is an unknown function of the file contact_insert.php of the component Contact Form Handler. This manipulation of the argument name/company/email/topic/phone/comments causes sql injection. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was identified in oretnom23 php-travel-agency-system. This issue affects some unknown processing of the file admin/customer_detail.php of the component Admin Record Pages. The manipulation of the argument costomer_id/ticket_id/emp_id/salary_id/page_id leads to sql injection. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was determined in oretnom23 php-travel-agency-system. This vulnerability affects unknown code of the file admin/customer_search.php of the component Admin Search Pages. Executing a manipulation of the argument customer_name/voucher_no/emp_name can lead to sql injection. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was determined in TOTOLINK A950RG 4.1.2cu.5268_B20221104. Affected is the function apmib_set of the file firewall.so. This manipulation causes command injection. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized. |
| A vulnerability was identified in dayrui XunRuiCMS up to 4.7.4. Affected by this vulnerability is the function _get_tpl_content of the file dayrui/Fcms/Library/Notice.php of the component Email Template Rendering. The manipulation leads to code injection. The attack can be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was identified in beecue FastBee up to 2.1.0. Affected by this issue is some unknown functionality of the file /iot/script of the component Groovy Script Executor. The manipulation leads to code injection. The attack is possible to be carried out remotely. The identifier of the patch is 890a33846005a937a58cccd738b7fb9821b82ea9. It is suggested to install a patch to address this issue. |
| A vulnerability was found in Oray Pugongying X5 Pro 7.6.1. This affects an unknown part of the component Dnsmasq. Performing a manipulation results in crlf injection. Remote exploitation of the attack is possible. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was detected in Oray Pugongying X5 Pro 7.6.1. Affected is an unknown function of the file /etc/ipsec.conf of the component IPsec Policy Handler. The manipulation of the argument secproto results in crlf injection. The attack can be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security flaw has been discovered in Oray Pugongying X5 Pro 7.6.1. The impacted element is an unknown function of the component Ser2net. Performing a manipulation of the argument regmsg results in crlf injection. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| Pug is an npm package which is a high-performance template engine. In pug before version 3.0.1, if a remote attacker was able to control the `pretty` option of the pug compiler, e.g. if you spread a user provided object such as the query parameters of a request into the pug template inputs, it was possible for them to achieve remote code execution on the node.js backend. This is fixed in version 3.0.1. This advisory applies to multiple pug packages including "pug", "pug-code-gen". pug-code-gen has a backported fix at version 2.0.3. This advisory is not exploitable if there is no way for un-trusted input to be passed to pug as the `pretty` option, e.g. if you compile templates in advance before applying user input to them, you do not need to upgrade. |
| A security flaw has been discovered in Sony Neural Network Libraries up to 1.39.0. This impacts the function func_set_nnabla_version_decorate of the file python/src/nnabla/utils/converter/utils.py of the component NNP Converter. Performing a manipulation of the argument function.type results in code injection. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer. |
| A vulnerability was found in itsourcecode Online Cake Ordering System 1.0. The affected element is an unknown function of the file /deletetransac.php. The manipulation of the argument ID results in sql injection. The attack may be performed from remote. The exploit has been made public and could be used. |
| A security flaw has been discovered in dayrui XunRuiCMS up to 4.7.4. Affected by this issue is the function str_replace of the file /var/www/html/zzmob/index.php of the component Mobile Site Directory. The manipulation of the argument dirname results in code injection. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been found in WAVLINK WL-WN530BE1-A V251117. Affected is the function con_check_read_finish of the file /protocol.csp. Such manipulation of the argument group_name/IP-FROM leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure. |
| When a post is published, Postiz treats a media path that is not a web address as a file on the server's disk, but it does not check that the file lies inside the upload directory. A registered user can store a crafted media path with a post, get it past the checks that normally restrict it, and have the publishing worker read an arbitrary file and send it as an attachment to a Discord server the user controls.
The same unconfined reads can be reached through two further routes. One tells the caller whether a file exists and can exhaust the backend's memory, the other delivers the file the same way as the main route. Self-registration is open by default, so the attacker needs no existing account. |
| A vulnerability was determined in dayrui XunRuiCMS up to 4.7.4. Affected is the function View of the file dayrui/Fcms/Core/View.php of the component Member Module. Executing a manipulation of the argument catid can lead to sql injection. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized. This patch is called 9b6ea0cf9c6e8cdc9a5260c38b95da5fed4c4231. The affected component should be upgraded. |
| A vulnerability was detected in mathurvishal CloudClassroom-PHP-Project. The affected element is an unknown function of the file viewquery.php. The manipulation of the argument eid results in sql injection. The attack can be executed remotely. The exploit is now public and may be used. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in TOTOLINK A950RG 4.1.2cu.5268_B20221104. This impacts the function getDeviceInfo of the file /var/lib/misc/udhcpd.leases of the component device-information Handler. The manipulation of the argument MAC address results in command injection. The attack can be launched remotely. The exploit has been made public and could be used. |
