| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Axios is a promise based HTTP client for the browser and Node.js. Prior to 1.15.0 and 0.31.0, Axios does not correctly handle hostname normalization when checking NO_PROXY rules. Requests to loopback addresses like localhost. (with a trailing dot) or [::1] (IPv6 literal) skip NO_PROXY matching and go through the configured proxy. This goes against what developers expect and lets attackers force requests through a proxy, even if NO_PROXY is set up to protect loopback or internal services. This issue leads to the possibility of proxy bypass and SSRF vulnerabilities allowing attackers to reach sensitive loopback or internal services despite the configured protections. This vulnerability is fixed in 1.15.0 and 0.31.0. |
| IBM Power Systems Firmware FW950.00 through FW950.H2, OP940.00 through OP940.a1 (Power9), and OP940.00 - OP940.81 (Power HMC) is affected by a vulnerability in host firmware NVRAM parsing. An attacker with root access to a guest partition on an OpenPOWER system can write a specially crafted NVRAM image, causing the host firmware boot stage to crash with possible memory corruption. This condition persists until operator intervention — clearing NVRAM via the service processor — to restore normal operation. This vulnerability only affects OpenPOWER systems; systems running PowerVM are not affected. Successful exploitation results in an integrity and availability impact to the managed system. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix skb length accounting after generic XDP frag adjustment
Generic XDP exposes non-linear skb fragments through an xdp_buff. If an
XDP program adjusts the fragment area, bpf_prog_run_generic_xdp() copies
xdp_frags_size back to skb->data_len but leaves skb->len containing the
old fragment contribution.
After a fragment shrink, this makes skb_headlen() larger than the actual
linear area. In the reproduced UDP receive path, __skb_datagram_iter()
copied 1024 bytes past the actual linear tail to userspace, starting at
struct skb_shared_info. The copied bytes included the affected skb's
nr_frags, xdp_frags_size and a kernel pointer from
skb_shinfo(skb)->frags[0]. Real packet data was displaced by the same
amount and truncated at the end.
Subtract the old data_len before replacing it and add the new data_len
afterwards, keeping skb->len and skb->data_len synchronized.
A 60000-byte UDP datagram on a veth pair with MTU 64000 was shortened by
1024 bytes from its fragment area. Before the fix, all 10 runs produced
corrupted payloads. After the fix, all 10 runs matched the expected
payload exactly. |
| In the Linux kernel, the following vulnerability has been resolved:
net/openvswitch: check Ethernet header length in key_extract()
When a packet arrives on an ARPHRD_NONE device (e.g. TUN),
ovs_flow_key_extract() trusts the user-provided skb->protocol field: if
it is ETH_P_TEB, the packet is classified as MAC_PROTO_ETHERNET and
key_extract() is called without ensuring the skb has ETH_HLEN (14) bytes
of linear data. key_extract() unconditionally pulls 2 * ETH_ALEN bytes
for MAC addresses and parse_ethertype() pulls 2 more, either of which
triggers a kernel BUG in __skb_pull() when the linear area is too small.
kernel BUG at include/linux/skbuff.h:2848!
RIP: 0010:key_extract+0xa7e/0xd90 net/openvswitch/flow.c:933
ovs_flow_key_extract+0x419/0xa70
ovs_vport_receive+0x222/0x390
netdev_frame_hook+0x3e0/0x630
tun_get_user+0x2d0c/0x38e0
Fixed by calling check_header() in key_extract() before accessing the
Ethernet header. |
| In the Linux kernel, the following vulnerability has been resolved:
veth: fix skb length accounting after XDP frag adjustment
veth exposes non-linear skb fragments through an xdp_buff. If an XDP
program adjusts the fragment area, veth_xdp_rcv_skb() copies
xdp_frags_size back to skb->data_len but leaves skb->len containing the
old fragment contribution.
After a fragment shrink, this makes skb_headlen() larger than the actual
linear area. In the reproduced UDP receive path, __skb_datagram_iter()
copied 1024 bytes past the actual linear tail to userspace, starting at
struct skb_shared_info. The copied bytes included the affected skb's
nr_frags, xdp_frags_size, and a kernel pointer from
skb_shinfo(skb)->frags[0]. Real packet data was displaced by the same
amount and truncated at the end.
Subtract the old data_len before replacing it and add the new data_len
afterwards, keeping skb->len and skb->data_len synchronized.
Additionally, bpf_xdp_pull_data() can advance data_end while leaving
frags present. The skb is then still non-linear, so the old
__skb_put(skb, off) triggers SKB_LINEAR_ASSERT().
Use skb_set_tail_pointer() and update skb->len explicitly instead,
following bpf_prog_run_generic_xdp(). Unlike __skb_put(),
skb_set_tail_pointer() does not require a linear skb.
A 60000-byte UDP datagram on a veth pair with MTU 64000 was shortened by
1024 bytes from its fragment area. Before the fix, all 10 runs produced
corrupted payloads. After the fix, all 10 runs matched the expected
payload exactly. A forced-tailroom reproducer also exercises
bpf_xdp_pull_data() with frags still present; the old code triggers
SKB_LINEAR_ASSERT(), while this fix passes 10/10 runs. |
| A flaw was found in OpenSSH. This vulnerability, a heap out-of-bounds read, occurs during the cleanup of GSSAPI (Generic Security Service Application Programming Interface) indicators when a trailing NULL termination is missing in the auth-indicators array. A remote attacker, under specific configurations involving GSSAPI authentication and a Kerberos environment, could exploit this to cause the SSH authentication path to crash or abort. This leads to a denial of service (DoS), impacting the availability of the SSH service. |
| A flaw was found in the interactive shell of the xmllint command-line tool, used for parsing XML files. When a user inputs an overly long command, the program does not check the input size properly, which can cause it to crash. This issue might allow attackers to run harmful code in rare configurations without modern protections. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: lzo: reject inline extents without valid headers
[BUG]
For a crafted btrfs image, the following KASAN can be triggered when
reading an inline lzo compressed file extent:
BUG: KASAN: slab-out-of-bounds in lzo_decompress+0x57d/0x700
Read of size 4 at addr ffff888006f2e644 by task btrfs_lzo_inlin/77
Call Trace:
<TASK>
dump_stack_lvl+0x5b/0x70
print_report+0xd1/0x610
kasan_report+0xe0/0x110
__asan_report_load_n_noabort+0x13/0x20
lzo_decompress+0x57d/0x700
btrfs_decompress+0x140/0x1c0
uncompress_inline+0x147/0x1b0
btrfs_get_extent+0xb23/0x10a0
btrfs_do_readpage.constprop.0+0x538/0x1ac0
btrfs_readahead+0x32f/0x5f0
read_pages+0x16f/0x850
page_cache_ra_unbounded+0x296/0x490
do_page_cache_ra+0xd9/0x130
page_cache_sync_ra+0x3ee/0x6f0
filemap_get_pages+0x306/0x15c0
filemap_read+0x329/0xd00
btrfs_file_read_iter+0x1f8/0x2b0
vfs_read+0x4ef/0x720
ksys_read+0xf8/0x1d0
__x64_sys_read+0x71/0xb0
x64_sys_call+0x1ab0/0x1b70
do_syscall_64+0x61/0x470
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
[CAUSE]
For an inline lzo compressed file extent, there should always be one lzo
header, recording the total length of the compressed data, followed by
one segment header, recording the compressed lzo payload.
But if a crafted inline lzo compressed file extent contains only an lzo
header, without the segment header or payload, lzo_decompress() will
still try to read the segment header, causing a read beyond the item
boundary.
Furthermore if the inline lzo compressed file extent is the first item
of the leaf, it will be at the extent buffer boundary. The above
out-of-boundary read will go beyond the extent buffer boundary,
triggering the above KASAN report.
[FIX]
Validate the total length of the inlined lzo compressed file extent, to
make sure there is at least one LZO header and one segment header, and a
non-zero payload.
[ Rework the commit message to remove slop ] |
| In the Linux kernel, the following vulnerability has been resolved:
net: devmem: prevent net-iov / page mixing
We should either have net_iov or page backed frags in a single skb,
otherwise it blows up down the stack. Don't allow mixing in
zerocopy_fill_skb_from_devmem(). |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: bitblit: bound-check glyph index in bit_cursor()
bit_cursor() fetches the glyph under the cursor with
c = scr_readw(vc_pos);
src = vc_font.data + ((c & charmask) * w * height);
where charmask is 0x1ff when vc_hi_font_mask is set. The screen buffer
value comes directly from scr_readw() and may be larger than the current
font's glyph count.
Syzkaller triggers this via vcs_write(). The Call Trace shows
vcs_write() in vc_screen.c writing an arbitrary 16-bit value with
writev() to /dev/vcsa, which vcs_write_buf() in vc_screen.c stores via
vcs_scr_writew() without checking charcount. The stored value is later
read in bit_cursor() in bitblit.c.
When the font is changed from a font with 512 glyphs to a font with
256 glyphs, the screen buffer can retain characters with the high
bit set from the previous mode, which could also produce the same
out-of-bounds access.
BUG: KASAN: global-out-of-bounds in soft_cursor+0x378/0x6bc drivers/video/fbdev/core/softcursor.c:70
Read of size 16 at addr ffff800086c57970
Call Trace:
soft_cursor+0x378/0x6bc drivers/video/fbdev/core/softcursor.c:70
bit_cursor+0xa90/0x1108 drivers/video/fbdev/core/bitblit.c:365
fbcon_cursor+0x344/0x498 drivers/video/fbdev/core/fbcon.c:1427
hide_cursor+0xdc/0x2d0 drivers/tty/vt/vt.c:883
update_region+0x100/0x18c drivers/tty/vt/vt.c:669
vcs_write+0x8ec/0xaf0 drivers/tty/vt/vc_screen.c:685
bit_putcs_aligned() and bit_putcs_unaligned() already clamp the glyph
index to vc_font.charcount. Apply the same clamp in bit_cursor() after
extracting the attribute and masking, before indexing fontdata.
The fix completes the bounds checking started in commit 18c4ef4e765a
("fbdev: bitblit: bound-check glyph index in bit_putcs*"), which missed
the cursor path.
This change should be safe because the clamp reuses the existing
contract from fbcon: charcount is maintained under console_lock in
con_font_set() and fbcon_font_set(), and hi_font_mask is cleared when
switching from 512 to 256 glyphs. When stale screen data with high bits
remains after a font switch, or when vcs_write() stores an arbitrary
value, clamping the index to 0 prevents the out-of-bounds read without
changing cursor semantics — the same fallback bit_putcs uses. |
| A flaw was found in GLib. A buffer over-read can occur in g_io_channel_read_line_backend() in the giochannel.c file when a custom line terminator with a length greater than one is set, causing memcmp to read past the GString buffer. This vulnerability can cause a minor information disclosure of 7 bytes or a denial of service when the buffer over-read crosses a page boundary. |
| A flaw was found in GLib. An off-by-one error can occur in the gvs_tuple_is_normal function in the glib/gvariant-serialiser.c file when doing an alignment padding check because the bounds check uses > instead of >=, causing an out-of-bounds read of only 1 byte. This issue can cause a minor information disclosure of 1 byte and a denial of service when the out-of-bounds read crosses a page boundary. |
| A flaw was found in GLib. A buffer over-read can occur in the g_regex_replace function when used with the `G_REGEX_RAW` compile flag and case-change replacement escapes because the string_append function processes matched substrings using UTF-8 functions that assume valid UTF-8 input, even when the string is treated as raw bytes. This vulnerability can cause a minor information disclosure of 1-5 bytes and a denial of service when the buffer over-read crosses a page boundary. |
| A flaw was found in GLib. An out-of-bounds read of only 2 bytes can occur in the g_date_time_get_ymd function in the glib/gdatetime.c file when an invalid GDateTime object produced by the g_date_time_add_full function is processed. This flaw can corrupt the date output and potentially cause logic errors that may lead to a denial of service. |
| A flaw was found in GLib (Gnome Lib). This vulnerability allows a remote attacker to cause heap corruption, leading to a denial of service or potential code execution via a buffer-underflow in the GVariant parser when processing maliciously crafted input strings. |
| A flaw was found in GNU Coreutils. The sort utility's begfield() function is vulnerable to a heap buffer under-read. The program may access memory outside the allocated buffer if a user runs a crafted command using the traditional key format. A malicious input could lead to a crash or leak sensitive data. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix Route Information option length validation
rt6_route_rcv() validates the Route Information option (RFC 4191) length
against the prefix length, but both checks are off by one.
rinfo->length is the ND option length in units of 8 octets and it
*includes* the 8-byte option header, so an option carrying N bytes of
prefix has length == 1 + N/8. RFC 4191 section 2.3 requires length 3
when Prefix Length is greater than 64, and 2 or 3 when it is greater
than 0. The code accepts length >= 2 and length >= 1 respectively.
ipv6_addr_prefix() then copies prefix_len/8 bytes out of rinfo->prefix,
so a Router Advertisement with (prefix_len=128, length=2) or
(prefix_len=64, length=1) makes the kernel read up to 8 bytes past the
end of the option. Those bytes end up in the prefix of the route that
gets installed, so they are visible to userspace:
# RA with a Route Information option (prefix_len=128, length=2)
# followed by a source link-layer address option, 01 01 de ad be ef ca fe
$ ip -6 route show
2001:db8:dead:beef:101:dead:beef:cafe via fe80::1234 dev veth0 proto ra
^^^^^^^^^^^^^^^^^^ the next option, read out of bounds
When the Route Information option is the last one in the packet, those
eight bytes come from the skb tail room instead.
Reject the option lengths RFC 4191 does not allow. |
| In the Linux kernel, the following vulnerability has been resolved:
net/atm: fix slab-out-of-bounds read in vcc_setsockopt()
vcc_setsockopt() contained an ineffective optlen check:
if (__SO_LEVEL_MATCH(optname, level) && optlen != __SO_SIZE(optname))
return -EINVAL;
If __SO_LEVEL_MATCH(optname, level) evaluated to false (e.g. if the caller
passed a mismatched level), the length check optlen != __SO_SIZE(optname)
was short-circuited and bypassed. Execution then fell through to switch(optname),
calling copy_from_sockptr() assuming optval contained sufficient space.
Furthermore, even if level matched, a cgroup BPF setsockopt filter could shrink
optlen after entry. Because copy_from_sockptr() on kernel pointers uses memcpy(),
this leads to a KASAN slab-out-of-bounds read when optlen is smaller than the
expected structure size.
Fix this by using copy_safe_from_sockptr(), which unconditionally validates
that optlen is at least the expected size before copying. Also change the local
'value' variable type from 'unsigned long' to 'int' so that SO_SETCLP matches
its sizeof(int) ABI encoding on 64-bit systems. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: validate launch-time metadata size
Launch-time metadata extends beyond the first 16 bytes of struct
xsk_tx_metadata. Reject the request when the registered metadata area does
not contain the complete field.
Snapshot the validated flags for the generic transmit path and use that
snapshot for request and completion processing, avoiding inconsistent
decisions if user space changes the flags concurrently.
Note that only xsk_skb_metadata is properly using the flags,
__xsk_buff_get_metadata ignores them. Next commits address that. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usx2y: bound the hwdep mmap fault offset
snd_us428ctls_vm_fault() turns the faulting page offset into a kernel
address with no bound of any kind:
offset = vmf->pgoff << PAGE_SHIFT;
vaddr = (char *)(...)->us428ctls_sharedmem + offset;
page = virt_to_page(vaddr);
get_page(page);
vmf->page = page;
return 0;
snd_us428ctls_mmap() checks only the length of the mapping, never the
offset, and us428ctls_sharedmem is a single page from
alloc_pages_exact(). For a character device file_mmap_size_max()
returns ULONG_MAX, so the mm layer imposes no ceiling either. Every page
offset above zero resolves to a struct page outside the object, and the
handler installs it into the caller's address space read-write; the vma
is not marked read-only.
The caller picks the page frame with a single mmap() argument and gets
read-write access to a page of kernel memory it does not own; an offset
that lands in an unpopulated vmemmap region oopses instead.
A process that can open the hwdep node of an attached US-X2Y reaches
this after loading the FPGA image through the same node; no capability
check is involved.
On 7.2.0-rc5 (arm64), mmap() with a large offset:
Unable to handle kernel paging request at virtual address fffffdffc45d5ac8
pc : snd_us428ctls_vm_fault+0x68/0x140 [snd_usb_usx2y]
Call trace:
snd_us428ctls_vm_fault+0x68/0x140 [snd_usb_usx2y]
__do_fault
__handle_mm_fault
handle_mm_fault
el0_da
Reject any offset outside the shared region. The pcm hwdep handler in
usx2yhwdeppcm.c computes its address the same way and needs the same
bound.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
