| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: respect peer refcount in CMD_NEW_PEER error path
ovpn_nl_peer_new_doit()'s error path calls ovpn_peer_release() directly
rather than ovpn_peer_put(), bypassing the kref. The accompanying
comment ("peer was not yet hashed, thus it is not used in any context")
holds for UDP but not for TCP.
For UDP, the ovpn_socket union uses the .ovpn arm and never points back
at a peer; UDP encap_recv looks up peers via the not-yet-populated
hashtables, so the new peer is unreachable until ovpn_peer_add()
publishes it.
For TCP, ovpn_socket_new() sets ovpn_sock->peer and
ovpn_tcp_socket_attach() publishes ovpn_sock via rcu_assign_sk_user_data().
From that moment until ovpn_socket_release() detaches in the error path,
the TCP fd is fully wired: userspace recvmsg / sendmsg / close / poll
on the fd, as well as the strparser-driven ovpn_tcp_rcv() path, can
reach the peer through sk_user_data -> ovpn_sock->peer and bump its
refcount via ovpn_peer_hold().
ovpn_tcp_socket_wait_finish() (called inside ovpn_socket_release())
drains strparser and the tx work, but does not synchronize with
userspace syscall callers that already hold a peer reference. If
ovpn_nl_peer_modify() or ovpn_peer_add() returns an error while such
a caller is in flight - notably an ovpn_tcp_recvmsg() blocked in
__skb_recv_datagram() on peer->tcp.user_queue - the direct
ovpn_peer_release() destroys the peer while the caller still holds
the reference, and the eventual ovpn_peer_put() from that caller
operates on freed memory.
Replace the direct destructor call with ovpn_peer_put() so the kref
correctly defers destruction until the last reference is dropped.
In the common case where no concurrent user is present, behaviour is
unchanged: the kref hits zero immediately and ovpn_peer_release_kref()
runs the same destructor.
With this conversion ovpn_peer_release() has no callers outside peer.c
- ovpn_peer_release_kref() in the same translation unit is the only
remaining user - so make it static and drop its declaration from
peer.h. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dpu: don't mix devm and drmm functions
Mixing devm and drmm functions will result in a use-after-free on msm
driver teardown if userspace keeps a reference on the drm device:
The WB connector data will be destroyed because of the use of
devm_kzalloc()), while the usersoace still can try interacting with the
WB connector (which uses drmm_ functions).
Change dpu_writeback_init() to use drmm_.
Patchwork: https://patchwork.freedesktop.org/patch/722656/ |
| Sandbox escape due to use-after-free in the DOM: Navigation component. This vulnerability was fixed in Firefox 155, Firefox ESR 115.40, Firefox ESR 140.15, Firefox ESR 153.2, Thunderbird 155, Thunderbird 140.15, and Thunderbird 153.2. |
| Use-after-free in the Audio/Video component. This vulnerability was fixed in Firefox 155, Firefox ESR 115.40, Firefox ESR 140.15, Firefox ESR 153.2, Thunderbird 155, Thunderbird 140.15, and Thunderbird 153.2. |
| Sandbox escape due to use-after-free in the DOM: Security component. This vulnerability was fixed in Firefox 155, Firefox ESR 115.40, Firefox ESR 140.15, Firefox ESR 153.2, Thunderbird 155, Thunderbird 140.15, and Thunderbird 153.2. |
| Use-after-free in the Audio/Video component. This vulnerability was fixed in Firefox 155, Firefox ESR 140.15, Firefox ESR 153.2, Thunderbird 155, Thunderbird 140.15, and Thunderbird 153.2. |
| Use-after-free in the DOM: Core & HTML component. This vulnerability was fixed in Firefox 155, Firefox ESR 153.2, Thunderbird 155, and Thunderbird 153.2. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Reject exited events as group leaders
perf_event_remove_on_exec() sets remove-on-exec events to the EXIT state
and detaches their group relationships. The event's file descriptor can
remain open, however, and perf_event_open() currently accepts that event
as a group leader because its early validation rejects only REVOKED and
DEAD events.
A new sibling can consequently be linked to the detached leader. When
the leader is closed, perf_group_detach() observes that its
PERF_ATTACH_GROUP bit is already clear and skips the new sibling. The
sibling then retains a group_leader pointer to the freed event.
Reject group leaders in the EXIT state. Perform the check while holding
the shared context mutex so that an exec in the target task cannot detach
the leader between validation and group attachment.
[peterz: make the earlier test fully consistent] |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: igmp: Fix potential UAF in igmp_gq_start_timer()
A race condition exists between device teardown (inetdev_destroy) and
incoming IGMP query processing (igmp_rcv), leading to a Use-After-Free
in the IGMP timer callback.
During device destruction, inetdev_destroy() drops the primary reference
to in_device, which can drop its refcount to 0. The actual freeing of
in_device memory is deferred via RCU (using call_rcu()).
Concurrently, igmp_rcv() runs under RCU read lock and obtains the
in_device pointer. Because the memory is RCU-protected, CPU-0 can safely
dereference in_device even if its refcount has hit 0.
However, if CPU-0 calls igmp_gq_start_timer() and re-arms the timer, it
attempts to acquire a reference using in_dev_hold(). This increments the
refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning.
Since the in_device memory is still scheduled to be freed after the RCU
grace period (as the free callback does not check the refcount again),
the device is freed while the timer is still armed. When the timer
expires, it accesses the freed memory, causing a kernel panic.
Fix this by using refcount_inc_not_zero() (via a new helper
in_dev_hold_safe()) to prevent acquiring a reference if the device is
already being destroyed. If the refcount is 0, we do not arm the timer.
A similar issue in IPv6 MLD is fixed in a subsequent patch. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: fix use-after-free on linked stream runtime in snd_pcm_drain()
In the drain loop, the local variable 'runtime' is reassigned to a
linked stream's runtime (runtime = s->runtime at line 2157). After
releasing the stream lock at line 2169, the code accesses
runtime->no_period_wakeup, runtime->rate, and runtime->buffer_size
(lines 2170-2178) — all referencing the linked stream's runtime without
any lock or refcount protecting its lifetime.
A concurrent close() on the linked stream's fd triggers
snd_pcm_release_substream() → snd_pcm_drop() → pcm_release_private()
→ snd_pcm_unlink() → snd_pcm_detach_substream() → kfree(runtime).
No synchronization prevents kfree(runtime) from completing while the
drain path dereferences the stale pointer.
Fix by caching the needed runtime fields (no_period_wakeup, rate,
buffer_size) into local variables while still holding the stream lock,
and using the cached values after the lock is released. |
| In the Linux kernel, the following vulnerability has been resolved:
veth: fix NAPI leak in XDP enable error path
During XDP enablement in veth, if xdp_rxq_info_reg() or
xdp_rxq_info_reg_mem_model() fails, the driver rolls back the changes.
However, the rollback loop:
for (i--; i >= start; i--) {
decrements the loop index 'i' before the first iteration. This
correctly skips unregistering the rxq for the failed index 'i' (as
registration failed or was already cleaned up), but it also
erroneously skips calling netif_napi_deli() for rq[i].xdp_napi.
Since netif_napi_add() was already called for index 'i', this leaves
a dangling napi_struct in the device's napi_list. When the veth
device is later destroyed, the freed queue memory (which contains the
leaked NAPI structure) can be reused.
The subsequent device teardown iterates the NAPI list and
corrupts the reallocated memory, leading to UAF.
Fix this by explicitly deleting the NAPI association for the failed
index 'i' before rolling back the successfully configured queues. |
| Internally found bugs present in Thunderbird 153. Some of these bugs showed evidence of memory corruption or another security-relevant defect and we presume that with enough effort some of these could have been exploited. This vulnerability was fixed in Firefox 154 and Thunderbird 154. |
| This CVE ID has been rejected as a duplicate. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: gw: acquire ethernet header only after skb realloc
The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer
behind the skb. Variables which were pointing to the old buffer need to be
reassigned to avoid an use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix iommu domain lifetime race during device removal
When force_iova mode is enabled, amdxdna_remove() frees xdna->domain. If
amdxdna_gem_obj_free() is called after device removal, it may attempt to
access xdna->domain, resulting in a use-after-free.
Fix the race by adding freeing xdna->domain as a managed release action,
so its lifetime is managed by DRM and remains valid until all managed
resources are released. |
| In the Linux kernel, the following vulnerability has been resolved:
media: atomisp: gc2235: fix UAF and memory leak
gc2235_probe() handles its error paths incorrectly.
If media_entity_pads_init() fails, gc2235_remove() is called, which
tears down the subdev and frees dev, but then still falls through to
atomisp_register_i2c_module(). This results in use-after-free.
If atomisp_register_i2c_module() fails, the media entity and control
handler are left initialized and dev is leaked.
gc2235_remove() unconditionally calls media_entity_cleanup() and
v4l2_ctrl_handler_free(), but these are not initialized at every
error path in gc2235_probe().
Replace gc2235_remove() calls in the probe error paths with explicit
unwind labels that free only the resources initialized at each point
of failure, in reverse order of initialization. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_expect: use conntrack GC to reap expectations
This patch replaces the timer API by GC worker approach for
expectations, as it already happened in many other subsystems.
Use the existing conntrack GC worker to iterate over the local list of
expectations in the master conntrack to reap expired expectations.
Check IPS_HELPER_BIT to run GC for expectations, set it on for nft_ct
expectation which nevers sets it. Hold the expectation spinlock while
iterating over the master conntrack expectation list to synchronize with
nf_ct_remove_expectations(). This also performs runtime packet path
garbage collection through the expectation insertion and lookup
functions while walking over one of the chains of the global expectation
hashtables. Unconfirmed conntrack entries are skipped since ct->ext can
be reallocated and dying are skipped since those will be gone soon.
Set on IPS_HELPER_BIT if the helper ct extension is added, then the new
GC worker does not need to bump the ct refcount to check if the ct->ext
helper is available.
This removes the extra bump on the refcount for expectation timers, this
allows to remove several nf_ct_expect_put() calls after the unlink,
after this update only refcount remains at 1 while on the expectation
hashes.
This patch implicitly addresses a race with the existing timer API
allowing an expectation to access a stale exp->master pointer which has
been already released when expectation removal loses races with an
expiring timer, ie. timer_del() reporting false.
Add a new NF_CT_EXPECT_DEAD flag to reap this expectation via GC. This
is needed by nf_conntrack_unexpect_related() which is called in error
paths to invalidate newly created expectations that has been added into
the hashes. These expectactions cannot be inmediately released as GC or
nf_ct_remove_expectations() could race to make it. On expectation
insert, the runtime GC reaps stale expectations before checking the
expectation limit set by policy.
Set current timestamp in nf_ct_expect_alloc(), then add the expectation
policy timeout (or custom timeout specified added on top of this) to
specify the expectation lifetime. |
| In the Linux kernel, the following vulnerability has been resolved:
liveupdate: Reference count incoming FLB data
Increment the incoming FLB refcount in liveupdate_flb_get_incoming() so
that the FLB structure cannot be freed while the caller is actively using
it. Add an additional liveupdate_flb_put_incoming() function so the
caller can explicitly indicate when it is done using the FLB data.
During a Live Update, a subsystem might need to hold onto the incoming
File-Lifecycle-Bound (FLB) data for an extended period, such as during
device enumeration. Incrementing the reference count guarantees that the
data remains valid and accessible until the subsystem releases it,
preventing future use-after-free bugs. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: drop __init from vec_check_unaligned_access_speed_all_cpus
This function runs within a kthread and need not necessarily finish
before system finishes boot and free_initmem() unmaps the .init.text
section. This function makes calls to SBI for probing unaligned access
speed, and if this is slow for some reason (say some debug prints were
added to SBI), the kthread can still be running at this point and result
in an instruction page fault when trying to fetch from the freed region.
[ 25.642087] Unable to handle kernel paging request at virtual address ffffffff80a04ef8
[ 25.646694] Current vec_check_unali pgtable: 4K pagesize, 48-bit VAs, pgdp=0x00004000316e9000
[ 25.653170] [ffffffff80a04ef8] pgd=000010004be7e401, p4d=000010004be7e401, pud=000010004be7e001, pmd=000010000c3000e3
[ 25.661244] Oops [#1]
[ 25.662997] Modules linked in:
[ 25.665357] CPU: 3 UID: 0 PID: 42 Comm: vec_check_unali Not tainted 7.0.0-tt-blackhole-asrinivasan-00007-g30ff73f18211 #570 PREEMPTLAZY
[ 25.674669] Hardware name: Tenstorrent Blackhole (DT)
[ 25.678545] epc : vec_check_unaligned_access_speed_all_cpus+0x18/0x2c
[ 25.683458] ra : vec_check_unaligned_access_speed_all_cpus+0x18/0x2c
[ 25.688372] epc : ffffffff80a04ef8 ra : ffffffff80a04ef8 sp : ffff8f8000203e20
[ 25.693874] gp : ffffffff814dc168 tp : ffffaf8001ad9900 t0 : 0000000000000000
[ 25.699401] t1 : fffffffffffffff0 t2 : ffffaf8001ad9a10 s0 : ffff8f8000203e30
[ 25.704912] s1 : ffffaf80018dc780 a0 : 0000000000000000 a1 : 0000000000000002
[ 25.710407] a2 : 00000000000001f0 a3 : 0000000000000018 a4 : 0000000000000000
[ 25.715917] a5 : 0000000000000000 a6 : ffffaf8001c03d98 a7 : ffffaf8001c03e30
[ 25.721419] s2 : ffff8f8000023c98 s3 : ffffaf8001aa1240 s4 : ffffffff80a04ee0
[ 25.726937] s5 : 0000000000000000 s6 : 0000000000000000 s7 : 0000000000000000
[ 25.732450] s8 : 0000000000000000 s9 : 0000000000000000 s10: 0000000000000000
[ 25.737944] s11: 0000000000000000 t3 : 0000000000000002 t4 : 0000000000000402
[ 25.743481] t5 : 0000000000000040 t6 : 0000000000000004 ssp : 0000000000000000
[ 25.749024] status: 0000000200000120 badaddr: ffffffff80a04ef8 cause: 000000000000000c
[ 25.755060] [<ffffffff80a04ef8>] vec_check_unaligned_access_speed_all_cpus+0x18/0x2c
[ 25.760964] [<ffffffff80047a10>] kthread+0xd8/0xfc
[ 25.764660] [<ffffffff80010c48>] ret_from_fork_kernel+0x18/0x1c4
[ 25.769220] [<ffffffff80895fe6>] ret_from_fork_kernel_asm+0x16/0x18
[ 25.774018] Code: cccc cccc cccc cccc cccc cccc cccc cccc cccc cccc (cccc) cccc
Drop __init from its signature so that this doesn't happen. |
| An attacker that has valid credentials can use a Sieve script with the editheader extension to trigger a use-after-free in the mail editing code, and to write memory contents beyond the intended buffer into the delivered mail. This causes memory leak and opportunity to do memory corruption during mail delivery, which can crash the delivery process and may allow execution of arbitrary code in the context of that process. Disable the Sieve editheader extension. Update to non-vulnerable version. No publicly available exploits are known. |
