| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In SchedMD Slurm before 24.11.5, 24.05.8, and 23.11.11, the accounting system can allow a Coordinator to promote a user to Administrator. |
| Improper Input Validation vulnerability in Management Program in TXOne Networks Portable Inspector and Portable Inspector Pro Edition allows remote attacker to crash management service. The Denial of Service situation can be resolved by restarting the management service.
This issue affects Portable Inspector: through 1.0.0; Portable Inspector Pro Edition: through 1.0.0. |
| DjVuLibre is a GPL implementation of DjVu, a web-centric format for distributing documents and images. Prior to version 3.5.29, the MMRDecoder::scanruns method is affected by an OOB-write vulnerability, because it does not check that the xr pointer stays within the bounds of the allocated buffer. This can lead to writes beyond the allocated memory, resulting in a heap corruption condition. An out-of-bounds read with pr is also possible for the same reason. This issue has been patched in version 3.5.29. |
| tar-fs provides filesystem bindings for tar-stream. Versions prior to 3.1.1, 2.1.3, and 1.16.5 are vulnerable to symlink validation bypass if the destination directory is predictable with a specific tarball. This issue has been patched in version 3.1.1, 2.1.4, and 1.16.6. A workaround involves using the ignore option on non files/directories. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: qcom-qusb2: Fix NULL pointer dereference on early suspend
Enabling runtime PM before attaching the QPHY instance as driver data
can lead to a NULL pointer dereference in runtime PM callbacks that
expect valid driver data. There is a small window where the suspend
callback may run after PM runtime enabling and before runtime forbid.
This causes a sporadic crash during boot:
```
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a1
[...]
CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 6.16.7+ #116 PREEMPT
Workqueue: pm pm_runtime_work
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : qusb2_phy_runtime_suspend+0x14/0x1e0 [phy_qcom_qusb2]
lr : pm_generic_runtime_suspend+0x2c/0x44
[...]
```
Attach the QPHY instance as driver data before enabling runtime PM to
prevent NULL pointer dereference in runtime PM callbacks.
Reorder pm_runtime_enable() and pm_runtime_forbid() to prevent a
short window where an unnecessary runtime suspend can occur.
Use the devres-managed version to ensure PM runtime is symmetrically
disabled during driver removal for proper cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: xilinx: xdma: Fix regmap max_register
The max_register field is assigned the size of the register memory
region instead of the offset of the last register.
The result is that reading from the regmap via debugfs can cause
a segmentation fault:
tail /sys/kernel/debug/regmap/xdma.1.auto/registers
Unable to handle kernel paging request at virtual address ffff800082f70000
Mem abort info:
ESR = 0x0000000096000007
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x07: level 3 translation fault
[...]
Call trace:
regmap_mmio_read32le+0x10/0x30
_regmap_bus_reg_read+0x74/0xc0
_regmap_read+0x68/0x198
regmap_read+0x54/0x88
regmap_read_debugfs+0x140/0x380
regmap_map_read_file+0x30/0x48
full_proxy_read+0x68/0xc8
vfs_read+0xcc/0x310
ksys_read+0x7c/0x120
__arm64_sys_read+0x24/0x40
invoke_syscall.constprop.0+0x64/0x108
do_el0_svc+0xb0/0xd8
el0_svc+0x38/0x130
el0t_64_sync_handler+0x120/0x138
el0t_64_sync+0x194/0x198
Code: aa1e03e9 d503201f f9400000 8b214000 (b9400000)
---[ end trace 0000000000000000 ]---
note: tail[1217] exited with irqs disabled
note: tail[1217] exited with preempt_count 1
Segmentation fault |
| In the Linux kernel, the following vulnerability has been resolved:
phy: stm32-usphyc: Fix off by one in probe()
The "index" variable is used as an index into the usbphyc->phys[] array
which has usbphyc->nphys elements. So if it is equal to usbphyc->nphys
then it is one element out of bounds. The "index" comes from the
device tree so it's data that we trust and it's unlikely to be wrong,
however it's obviously still worth fixing the bug. Change the > to >=. |
| In the Linux kernel, the following vulnerability has been resolved:
w1: therm: Fix off-by-one buffer overflow in alarms_store
The sysfs buffer passed to alarms_store() is allocated with 'size + 1'
bytes and a NUL terminator is appended. However, the 'size' argument
does not account for this extra byte. The original code then allocated
'size' bytes and used strcpy() to copy 'buf', which always writes one
byte past the allocated buffer since strcpy() copies until the NUL
terminator at index 'size'.
Fix this by parsing the 'buf' parameter directly using simple_strtoll()
without allocating any intermediate memory or string copying. This
removes the overflow while simplifying the code. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: imu: st_lsm6dsx: fix iio_chan_spec for sensors without event detection
The st_lsm6dsx_acc_channels array of struct iio_chan_spec has a non-NULL
event_spec field, indicating support for IIO events. However, event
detection is not supported for all sensors, and if userspace tries to
configure accelerometer wakeup events on a sensor device that does not
support them (e.g. LSM6DS0), st_lsm6dsx_write_event() dereferences a NULL
pointer when trying to write to the wakeup register.
Define an additional struct iio_chan_spec array whose members have a NULL
event_spec field, and use this array instead of st_lsm6dsx_acc_channels for
sensors without event detection capability. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: at91-sama5d2_adc: Fix potential use-after-free in sama5d2_adc driver
at91_adc_interrupt can call at91_adc_touch_data_handler function
to start the work by schedule_work(&st->touch_st.workq).
If we remove the module which will call at91_adc_remove to
make cleanup, it will free indio_dev through iio_device_unregister but
quite a bit later. While the work mentioned above will be used. The
sequence of operations that may lead to a UAF bug is as follows:
CPU0 CPU1
| at91_adc_workq_handler
at91_adc_remove |
iio_device_unregister(indio_dev) |
//free indio_dev a bit later |
| iio_push_to_buffers(indio_dev)
| //use indio_dev
Fix it by ensuring that the work is canceled before proceeding with
the cleanup in at91_adc_remove. |
| canonical/get-workflow-version-action is a GitHub composite action to get commit SHA that GitHub Actions reusable workflow was called with. Prior to 1.0.1, if the get-workflow-version-action step fails, the exception output may include the GITHUB_TOKEN. If the full token is included in the exception output, GitHub will automatically redact the secret from the GitHub Actions logs. However, the token may be truncated—causing part of the GITHUB_TOKEN to be displayed in plaintext in the GitHub Actions logs. Anyone with read access to the GitHub repository can view GitHub Actions logs. For public repositories, anyone can view the GitHub Actions logs. The opportunity to exploit this vulnerability is limited—the GITHUB_TOKEN is automatically revoked when the job completes. However, there is an opportunity for an attack in the time between the GITHUB_TOKEN being displayed in the logs and the completion of the job. Users using the github-token input are impacted. This vulnerability is fixed in 1.0.1. |
| Bugsink is a self-hosted error tracking tool. In versions prior to 2.0.5, brotli "bombs" (highly compressed brotli streams, such as many zeros) can be sent to the server. Since the server will attempt to decompress these streams before applying various maximums, this can lead to exhaustion of the available memory and thus a Denial of Service. This can be done if the `DSN` is known, which it is in many common setups (JavaScript, Mobile Apps). The issue is patched in Bugsink version `2.0.5`. The vulnerability is similar to, but distinct from, another brotli-related problem in Bugsink, GHSA-rrx3-2x4g-mq2h/CVE-2025-64509. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Nasir Uddin Generic Elements generic-elements-for-elementor allows Stored XSS.This issue affects Generic Elements: from n/a through <= 1.2.9. |
| Missing Authorization vulnerability in Jegstudio Gutenverse News – Advanced News Magazine Blog Gutenberg Blocks Addons gutenverse-news allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Gutenverse News – Advanced News Magazine Blog Gutenberg Blocks Addons: from n/a through <= 3.0.2. |
| Ironman PowerShell Universal 5.x before 5.0.12 allows an authenticated attacker to elevate their privileges and view job information. |
| SQL injection vulnerability in TeamCal Neo, version 3.8.2. This could allow an attacker to retrieve, update and delete all database information by injecting a malicious SQL statement via the ‘abs’ parameter in ‘/teamcal/src/index.php’. |
| Missing Authorization vulnerability in themerain ThemeRain Core themerain-core allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects ThemeRain Core: from n/a through <= 1.1.9. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rsi: Fix memory leak in rsi_coex_attach()
The coex_cb needs to be freed when rsi_create_kthread() failed in
rsi_coex_attach(). |
| A buffer overread can occur in the CPC application when operating in full duplex SPI upon receiving an invalid packet over the SPI interface. |
| Cross-Site Request Forgery (CSRF) vulnerability in apasionados DoFollow Case by Case dofollow-case-by-case allows Cross Site Request Forgery.This issue affects DoFollow Case by Case: from n/a through <= 3.5.1. |
