| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: also call xfrm_state_delete_tunnel at destroy time for states that were never added
In commit b441cf3f8c4b ("xfrm: delete x->tunnel as we delete x"), I
missed the case where state creation fails between full
initialization (->init_state has been called) and being inserted on
the lists.
In this situation, ->init_state has been called, so for IPcomp
tunnels, the fallback tunnel has been created and added onto the
lists, but the user state never gets added, because we fail before
that. The user state doesn't go through __xfrm_state_delete, so we
don't call xfrm_state_delete_tunnel for those states, and we end up
leaking the FB tunnel.
There are several codepaths affected by this: the add/update paths, in
both net/key and xfrm, and the migrate code (xfrm_migrate,
xfrm_state_migrate). A "proper" rollback of the init_state work would
probably be doable in the add/update code, but for migrate it gets
more complicated as multiple states may be involved.
At some point, the new (not-inserted) state will be destroyed, so call
xfrm_state_delete_tunnel during xfrm_state_gc_destroy. Most states
will have their fallback tunnel cleaned up during __xfrm_state_delete,
which solves the issue that b441cf3f8c4b (and other patches before it)
aimed at. All states (including FB tunnels) will be removed from the
lists once xfrm_state_fini has called flush_work(&xfrm_state_gc_work). |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix scx_enable() crash on helper kthread creation failure
A crash was observed when the sched_ext selftests runner was
terminated with Ctrl+\ while test 15 was running:
NIP [c00000000028fa58] scx_enable.constprop.0+0x358/0x12b0
LR [c00000000028fa2c] scx_enable.constprop.0+0x32c/0x12b0
Call Trace:
scx_enable.constprop.0+0x32c/0x12b0 (unreliable)
bpf_struct_ops_link_create+0x18c/0x22c
__sys_bpf+0x23f8/0x3044
sys_bpf+0x2c/0x6c
system_call_exception+0x124/0x320
system_call_vectored_common+0x15c/0x2ec
kthread_run_worker() returns an ERR_PTR() on failure rather than NULL,
but the current code in scx_alloc_and_add_sched() only checks for a NULL
helper. Incase of failure on SIGQUIT, the error is not handled in
scx_alloc_and_add_sched() and scx_enable() ends up dereferencing an
error pointer.
Error handling is fixed in scx_alloc_and_add_sched() to propagate
PTR_ERR() into ret, so that scx_enable() jumps to the existing error
path, avoiding random dereference on failure. |
| A vulnerability has been identified in Energy Services (All versions with G5DFR). Affected solutions using G5DFR contain default credentials. This could allow an attacker to gain control of G5DFR component and tamper with outputs from the device. |
| A vulnerability was found in Weitong Mall 1.0.0. It has been classified as critical. This affects an unknown part of the component Sale Endpoint. The manipulation of the argument ID leads to improper authorization. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. |
| A vulnerability was found in feng_ha_ha/megagao ssm-erp and production_ssm 1.0. It has been declared as problematic. Affected by this vulnerability is the function handleFileDownload of the file FileController.java of the component File Handler. The manipulation leads to path traversal. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This product is distributed under two entirely different names. |
| A vulnerability classified as critical has been found in Shanghai Bairui Information Technology SunloginClient 15.8.3.19819. This affects an unknown part in the library process.dll of the file sunlogin_guard.exe. The manipulation leads to uncontrolled search path. Local access is required to approach this attack. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability, which was classified as problematic, has been found in SunGrow Logger1000 01_A. This issue affects some unknown processing. The manipulation leads to weak password requirements. The attack may be initiated remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Path traversal may lead to arbitrary file download. The score without
least privilege principle violation is as calculated below. In
combination with other issues it may facilitate further compromise of
the device. Remediation in Version 6.8.0, release date: 01-Mar-25. |
| A vulnerability in the API subsystem of Cisco Unified Intelligence Center could allow an authenticated, remote attacker to obtain sensitive information from an affected system.
This vulnerability is due to improper validation of requests to certain API endpoints. An attacker could exploit this vulnerability by sending a valid request to a specific API endpoint within the affected system. A successful exploit could allow a low-privileged user to view sensitive information on the affected system that should be restricted. To exploit this vulnerability, the attacker must have valid user credentials on the affected system. |
| mySCADA myPRO does not properly neutralize POST requests sent to a specific port with version information. This vulnerability could be exploited by an attacker to execute arbitrary commands on the affected system. |
| After attempting to upload a file that does not meet prerequisites, GMOD Apollo will respond with local path information disclosure |
| mySCADA myPRO does not properly neutralize POST requests sent to a specific port with email information. This vulnerability could be exploited by an attacker to execute arbitrary commands on the affected system. |
| The WatchGuard Mobile VPN with SSL Client on Windows allows a locally
authenticated non-administrative Windows user to escalate their
privileges to NT AUTHORITY/SYSTEM on the Windows machine where the VPN
Client is installed.This issue affects the Mobile VPN with SSL Client 12.0 up to and including 12.11.2. |
| A vulnerability was identified in Daptin 0.10.3. Affected by this vulnerability is the function goqu.L of the file server/resource/resource_aggregate.go of the component Aggregate API. The manipulation of the argument column/group/order leads to sql injection. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was identified in jackying H-ui.admin up to 3.1. This affects an unknown function in the library /lib/webuploader/0.1.5/server/preview.php. The manipulation leads to unrestricted upload. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been found in Jehovahs Witnesses JW Library App up to 15.5.1 on Android. Affected is an unknown function of the component org.jw.jwlibrary.mobile.activity.SiloContainer. Such manipulation leads to path traversal. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. |
| A vulnerability was detected in OFFIS DCMTK up to 3.6.9. Affected by this issue is the function DcmByteString::makeDicomByteString of the file dcmdata/libsrc/dcbytstr.cc of the component dcmdata. The manipulation results in memory corruption. The attack can be launched remotely. Upgrading to version 3.7.0 can resolve this issue. The patch is identified as 4c0e5c10079392c594d6a7abd95dd78ac0aa556a. You should upgrade the affected component. |
| A security vulnerability has been detected in tiny-rdm Tiny RDM up to 1.2.5. Affected by this vulnerability is the function pickle.loads of the file pickle_convert.go of the component Pickle Decoding. The manipulation leads to deserialization. The attack can be initiated remotely. A high degree of complexity is needed for the attack. The exploitation appears to be difficult. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| The vulnerability arises when a client fetches a tools’ JSON specification, known as a Manual, from a remote Manual Endpoint. While a provider may initially serve a benign manual (e.g., one defining an HTTP tool call), earning the clients’ trust, a malicious provider can later change the manual to exploit the client. |
| The Userback plugin for WordPress is vulnerable to unauthorized access of data due to a missing capability check on the userback_get_json function in all versions up to, and including, 1.0.15. This makes it possible for authenticated attackers, with Subscriber-level access and above, to extract plugin's configuration data including the Userback API access token and site's posts/pages contents, including those that have private and draft status. |
