Export limit exceeded: 43083 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 43083 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 43083 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (43083 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-68236 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: ufs-qcom: Fix UFS OCP issue during UFS power down (PC=3) According to UFS specifications, the power-off sequence for a UFS device includes: - Sending an SSU command with Power_Condition=3 and await a response. - Asserting RST_N low. - Turning off REF_CLK. - Turning off VCC. - Turning off VCCQ/VCCQ2. As part of ufs shutdown, after the SSU command completion, asserting hardware reset (HWRST) triggers the device firmware to wake up and execute its reset routine. This routine initializes hardware blocks and takes a few milliseconds to complete. During this time, the ICCQ draws a large current. This large ICCQ current may cause issues for the regulator which is supplying power to UFS, because the turn off request from UFS driver to the regulator framework will be immediately followed by low power mode(LPM) request by regulator framework. This is done by framework because UFS which is the only client is requesting for disable. So if the rail is still in the process of shutting down while ICCQ exceeds LPM current thresholds, and LPM mode is activated in hardware during this state, it may trigger an overcurrent protection (OCP) fault in the regulator. To prevent this, a 10ms delay is added after asserting HWRST. This allows the reset operation to complete while power rails remain active and in high-power mode. Currently there is no way for Host to query whether the reset is completed or not and hence this the delay is based on experiments with Qualcomm UFS controllers across multiple UFS vendors. | ||||
| CVE-2025-68237 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mtdchar: fix integer overflow in read/write ioctls The "req.start" and "req.len" variables are u64 values that come from the user at the start of the function. We mask away the high 32 bits of "req.len" so that's capped at U32_MAX but the "req.start" variable can go up to U64_MAX which means that the addition can still integer overflow. Use check_add_overflow() to fix this bug. | ||||
| CVE-2025-68238 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: cadence: fix DMA device NULL pointer dereference The DMA device pointer `dma_dev` was being dereferenced before ensuring that `cdns_ctrl->dmac` is properly initialized. Move the assignment of `dma_dev` after successfully acquiring the DMA channel to ensure the pointer is valid before use. | ||||
| CVE-2025-68240 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: avoid having an active sc_timer before freeing sci Because kthread_stop did not stop sc_task properly and returned -EINTR, the sc_timer was not properly closed, ultimately causing the problem [1] reported by syzbot when freeing sci due to the sc_timer not being closed. Because the thread sc_task main function nilfs_segctor_thread() returns 0 when it succeeds, when the return value of kthread_stop() is not 0 in nilfs_segctor_destroy(), we believe that it has not properly closed sc_timer. We use timer_shutdown_sync() to sync wait for sc_timer to shutdown, and set the value of sc_task to NULL under the protection of lock sc_state_lock, so as to avoid the issue caused by sc_timer not being properly shutdowned. [1] ODEBUG: free active (active state 0) object: 00000000dacb411a object type: timer_list hint: nilfs_construction_timeout Call trace: nilfs_segctor_destroy fs/nilfs2/segment.c:2811 [inline] nilfs_detach_log_writer+0x668/0x8cc fs/nilfs2/segment.c:2877 nilfs_put_super+0x4c/0x12c fs/nilfs2/super.c:509 | ||||
| CVE-2025-68242 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: NFS: Fix LTP test failures when timestamps are delegated The utimes01 and utime06 tests fail when delegated timestamps are enabled, specifically in subtests that modify the atime and mtime fields using the 'nobody' user ID. The problem can be reproduced as follow: # echo "/media *(rw,no_root_squash,sync)" >> /etc/exports # export -ra # mount -o rw,nfsvers=4.2 127.0.0.1:/media /tmpdir # cd /opt/ltp # ./runltp -d /tmpdir -s utimes01 # ./runltp -d /tmpdir -s utime06 This issue occurs because nfs_setattr does not verify the inode's UID against the caller's fsuid when delegated timestamps are permitted for the inode. This patch adds the UID check and if it does not match then the request is sent to the server for permission checking. | ||||
| CVE-2025-68245 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: netpoll: fix incorrect refcount handling causing incorrect cleanup commit efa95b01da18 ("netpoll: fix use after free") incorrectly ignored the refcount and prematurely set dev->npinfo to NULL during netpoll cleanup, leading to improper behavior and memory leaks. Scenario causing lack of proper cleanup: 1) A netpoll is associated with a NIC (e.g., eth0) and netdev->npinfo is allocated, and refcnt = 1 - Keep in mind that npinfo is shared among all netpoll instances. In this case, there is just one. 2) Another netpoll is also associated with the same NIC and npinfo->refcnt += 1. - Now dev->npinfo->refcnt = 2; - There is just one npinfo associated to the netdev. 3) When the first netpolls goes to clean up: - The first cleanup succeeds and clears np->dev->npinfo, ignoring refcnt. - It basically calls `RCU_INIT_POINTER(np->dev->npinfo, NULL);` - Set dev->npinfo = NULL, without proper cleanup - No ->ndo_netpoll_cleanup() is either called 4) Now the second target tries to clean up - The second cleanup fails because np->dev->npinfo is already NULL. * In this case, ops->ndo_netpoll_cleanup() was never called, and the skb pool is not cleaned as well (for the second netpoll instance) - This leaks npinfo and skbpool skbs, which is clearly reported by kmemleak. Revert commit efa95b01da18 ("netpoll: fix use after free") and adds clarifying comments emphasizing that npinfo cleanup should only happen once the refcount reaches zero, ensuring stable and correct netpoll behavior. | ||||
| CVE-2025-68247 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: posix-timers: Plug potential memory leak in do_timer_create() When posix timer creation is set to allocate a given timer ID and the access to the user space value faults, the function terminates without freeing the already allocated posix timer structure. Move the allocation after the user space access to cure that. [ tglx: Massaged change log ] | ||||
| CVE-2025-68248 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vmw_balloon: indicate success when effectively deflating during migration When migrating a balloon page, we first deflate the old page to then inflate the new page. However, if inflating the new page succeeded, we effectively deflated the old page, reducing the balloon size. In that case, the migration actually worked: similar to migrating+ immediately deflating the new page. The old page will be freed back to the buddy. Right now, the core will leave the page be marked as isolated (as we returned an error). When later trying to putback that page, we will run into the WARN_ON_ONCE() in balloon_page_putback(). That handling was changed in commit 3544c4faccb8 ("mm/balloon_compaction: stop using __ClearPageMovable()"); before that change, we would have tolerated that way of handling it. To fix it, let's just return 0 in that case, making the core effectively just clear the "isolated" flag + freeing it back to the buddy as if the migration succeeded. Note that the new page will also get freed when the core puts the last reference. Note that this also makes it all be more consistent: we will no longer unisolate the page in the balloon driver while keeping it marked as being isolated in migration core. This was found by code inspection. | ||||
| CVE-2025-68249 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: most: usb: hdm_probe: Fix calling put_device() before device initialization The early error path in hdm_probe() can jump to err_free_mdev before &mdev->dev has been initialized with device_initialize(). Calling put_device(&mdev->dev) there triggers a device core WARN and ends up invoking kref_put(&kobj->kref, kobject_release) on an uninitialized kobject. In this path the private struct was only kmalloc'ed and the intended release is effectively kfree(mdev) anyway, so free it directly instead of calling put_device() on an uninitialized device. This removes the WARNING and fixes the pre-initialization error path. | ||||
| CVE-2025-68311 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tty: serial: ip22zilog: Use platform device for probing After commit 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM") serial drivers need to provide a device in struct uart_port.dev otherwise an oops happens. To fix this issue for ip22zilog driver switch driver to a platform driver and setup the serial device in sgi-ip22 code. | ||||
| CVE-2025-68252 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Fix dma_buf object leak in fastrpc_map_lookup In fastrpc_map_lookup, dma_buf_get is called to obtain a reference to the dma_buf for comparison purposes. However, this reference is never released when the function returns, leading to a dma_buf memory leak. Fix this by adding dma_buf_put before returning from the function, ensuring that the temporarily acquired reference is properly released regardless of whether a matching map is found. Rule: add | ||||
| CVE-2025-68253 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm: don't spin in add_stack_record when gfp flags don't allow syzbot was able to find the following path: add_stack_record_to_list mm/page_owner.c:182 [inline] inc_stack_record_count mm/page_owner.c:214 [inline] __set_page_owner+0x2c3/0x4a0 mm/page_owner.c:333 set_page_owner include/linux/page_owner.h:32 [inline] post_alloc_hook+0x240/0x2a0 mm/page_alloc.c:1851 prep_new_page mm/page_alloc.c:1859 [inline] get_page_from_freelist+0x21e4/0x22c0 mm/page_alloc.c:3858 alloc_pages_nolock_noprof+0x94/0x120 mm/page_alloc.c:7554 Don't spin in add_stack_record_to_list() when it is called from *_nolock() context. | ||||
| CVE-2025-68290 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: most: usb: fix double free on late probe failure The MOST subsystem has a non-standard registration function which frees the interface on registration failures and on deregistration. This unsurprisingly leads to bugs in the MOST drivers, and a couple of recent changes turned a reference underflow and use-after-free in the USB driver into several double free and a use-after-free on late probe failures. | ||||
| CVE-2025-68257 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: comedi: check device's attached status in compat ioctls Syzbot identified an issue [1] that crashes kernel, seemingly due to unexistent callback dev->get_valid_routes(). By all means, this should not occur as said callback must always be set to get_zero_valid_routes() in __comedi_device_postconfig(). As the crash seems to appear exclusively in i386 kernels, at least, judging from [1] reports, the blame lies with compat versions of standard IOCTL handlers. Several of them are modified and do not use comedi_unlocked_ioctl(). While functionality of these ioctls essentially copy their original versions, they do not have required sanity check for device's attached status. This, in turn, leads to a possibility of calling select IOCTLs on a device that has not been properly setup, even via COMEDI_DEVCONFIG. Doing so on unconfigured devices means that several crucial steps are missed, for instance, specifying dev->get_valid_routes() callback. Fix this somewhat crudely by ensuring device's attached status before performing any ioctls, improving logic consistency between modern and compat functions. [1] Syzbot report: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... CR2: ffffffffffffffd6 CR3: 000000006c717000 CR4: 0000000000352ef0 Call Trace: <TASK> get_valid_routes drivers/comedi/comedi_fops.c:1322 [inline] parse_insn+0x78c/0x1970 drivers/comedi/comedi_fops.c:1401 do_insnlist_ioctl+0x272/0x700 drivers/comedi/comedi_fops.c:1594 compat_insnlist drivers/comedi/comedi_fops.c:3208 [inline] comedi_compat_ioctl+0x810/0x990 drivers/comedi/comedi_fops.c:3273 __do_compat_sys_ioctl fs/ioctl.c:695 [inline] __se_compat_sys_ioctl fs/ioctl.c:638 [inline] __ia32_compat_sys_ioctl+0x242/0x370 fs/ioctl.c:638 do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline] ... | ||||
| CVE-2025-68258 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: comedi: multiq3: sanitize config options in multiq3_attach() Syzbot identified an issue [1] in multiq3_attach() that induces a task timeout due to open() or COMEDI_DEVCONFIG ioctl operations, specifically, in the case of multiq3 driver. This problem arose when syzkaller managed to craft weird configuration options used to specify the number of channels in encoder subdevice. If a particularly great number is passed to s->n_chan in multiq3_attach() via it->options[2], then multiple calls to multiq3_encoder_reset() at the end of driver-specific attach() method will be running for minutes, thus blocking tasks and affected devices as well. While this issue is most likely not too dangerous for real-life devices, it still makes sense to sanitize configuration inputs. Enable a sensible limit on the number of encoder chips (4 chips max, each with 2 channels) to stop this behaviour from manifesting. [1] Syzbot crash: INFO: task syz.2.19:6067 blocked for more than 143 seconds. ... Call Trace: <TASK> context_switch kernel/sched/core.c:5254 [inline] __schedule+0x17c4/0x4d60 kernel/sched/core.c:6862 __schedule_loop kernel/sched/core.c:6944 [inline] schedule+0x165/0x360 kernel/sched/core.c:6959 schedule_preempt_disabled+0x13/0x30 kernel/sched/core.c:7016 __mutex_lock_common kernel/locking/mutex.c:676 [inline] __mutex_lock+0x7e6/0x1350 kernel/locking/mutex.c:760 comedi_open+0xc0/0x590 drivers/comedi/comedi_fops.c:2868 chrdev_open+0x4cc/0x5e0 fs/char_dev.c:414 do_dentry_open+0x953/0x13f0 fs/open.c:965 vfs_open+0x3b/0x340 fs/open.c:1097 ... | ||||
| CVE-2025-68259 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Don't skip unrelated instruction if INT3/INTO is replaced When re-injecting a soft interrupt from an INT3, INT0, or (select) INTn instruction, discard the exception and retry the instruction if the code stream is changed (e.g. by a different vCPU) between when the CPU executes the instruction and when KVM decodes the instruction to get the next RIP. As effectively predicted by commit 6ef88d6e36c2 ("KVM: SVM: Re-inject INT3/INTO instead of retrying the instruction"), failure to verify that the correct INTn instruction was decoded can effectively clobber guest state due to decoding the wrong instruction and thus specifying the wrong next RIP. The bug most often manifests as "Oops: int3" panics on static branch checks in Linux guests. Enabling or disabling a static branch in Linux uses the kernel's "text poke" code patching mechanism. To modify code while other CPUs may be executing that code, Linux (temporarily) replaces the first byte of the original instruction with an int3 (opcode 0xcc), then patches in the new code stream except for the first byte, and finally replaces the int3 with the first byte of the new code stream. If a CPU hits the int3, i.e. executes the code while it's being modified, then the guest kernel must look up the RIP to determine how to handle the #BP, e.g. by emulating the new instruction. If the RIP is incorrect, then this lookup fails and the guest kernel panics. The bug reproduces almost instantly by hacking the guest kernel to repeatedly check a static branch[1] while running a drgn script[2] on the host to constantly swap out the memory containing the guest's TSS. [1]: https://gist.github.com/osandov/44d17c51c28c0ac998ea0334edf90b5a [2]: https://gist.github.com/osandov/10e45e45afa29b11e0c7209247afc00b | ||||
| CVE-2025-68291 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: Initialise rcv_mss before calling tcp_send_active_reset() in mptcp_do_fastclose(). syzbot reported divide-by-zero in __tcp_select_window() by MPTCP socket. [0] We had a similar issue for the bare TCP and fixed in commit 499350a5a6e7 ("tcp: initialize rcv_mss to TCP_MIN_MSS instead of 0"). Let's apply the same fix to mptcp_do_fastclose(). [0]: Oops: divide error: 0000 [#1] SMP KASAN PTI CPU: 0 UID: 0 PID: 6068 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 RIP: 0010:__tcp_select_window+0x824/0x1320 net/ipv4/tcp_output.c:3336 Code: ff ff ff 44 89 f1 d3 e0 89 c1 f7 d1 41 01 cc 41 21 c4 e9 a9 00 00 00 e8 ca 49 01 f8 e9 9c 00 00 00 e8 c0 49 01 f8 44 89 e0 99 <f7> 7c 24 1c 41 29 d4 48 bb 00 00 00 00 00 fc ff df e9 80 00 00 00 RSP: 0018:ffffc90003017640 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88807b469e40 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc90003017730 R08: ffff888033268143 R09: 1ffff1100664d028 R10: dffffc0000000000 R11: ffffed100664d029 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 000055557faa0500(0000) GS:ffff888126135000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f64a1912ff8 CR3: 0000000072122000 CR4: 00000000003526f0 Call Trace: <TASK> tcp_select_window net/ipv4/tcp_output.c:281 [inline] __tcp_transmit_skb+0xbc7/0x3aa0 net/ipv4/tcp_output.c:1568 tcp_transmit_skb net/ipv4/tcp_output.c:1649 [inline] tcp_send_active_reset+0x2d1/0x5b0 net/ipv4/tcp_output.c:3836 mptcp_do_fastclose+0x27e/0x380 net/mptcp/protocol.c:2793 mptcp_disconnect+0x238/0x710 net/mptcp/protocol.c:3253 mptcp_sendmsg_fastopen+0x2f8/0x580 net/mptcp/protocol.c:1776 mptcp_sendmsg+0x1774/0x1980 net/mptcp/protocol.c:1855 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg+0xe5/0x270 net/socket.c:742 __sys_sendto+0x3bd/0x520 net/socket.c:2244 __do_sys_sendto net/socket.c:2251 [inline] __se_sys_sendto net/socket.c:2247 [inline] __x64_sys_sendto+0xde/0x100 net/socket.c:2247 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f66e998f749 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffff9acedb8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f66e9be5fa0 RCX: 00007f66e998f749 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007ffff9acee10 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 R13: 00007f66e9be5fa0 R14: 00007f66e9be5fa0 R15: 0000000000000006 </TASK> | ||||
| CVE-2025-68262 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: zstd - fix double-free in per-CPU stream cleanup The crypto/zstd module has a double-free bug that occurs when multiple tfms are allocated and freed. The issue happens because zstd_streams (per-CPU contexts) are freed in zstd_exit() during every tfm destruction, rather than being managed at the module level. When multiple tfms exist, each tfm exit attempts to free the same shared per-CPU streams, resulting in a double-free. This leads to a stack trace similar to: BUG: Bad page state in process kworker/u16:1 pfn:106fd93 page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x106fd93 flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff) page_type: 0xffffffff() raw: 0017ffffc0000000 dead000000000100 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: nonzero entire_mapcount Modules linked in: ... CPU: 3 UID: 0 PID: 2506 Comm: kworker/u16:1 Kdump: loaded Tainted: G B Hardware name: ... Workqueue: btrfs-delalloc btrfs_work_helper Call Trace: <TASK> dump_stack_lvl+0x5d/0x80 bad_page+0x71/0xd0 free_unref_page_prepare+0x24e/0x490 free_unref_page+0x60/0x170 crypto_acomp_free_streams+0x5d/0xc0 crypto_acomp_exit_tfm+0x23/0x50 crypto_destroy_tfm+0x60/0xc0 ... Change the lifecycle management of zstd_streams to free the streams only once during module cleanup. | ||||
| CVE-2025-68266 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bfs: Reconstruct file type when loading from disk syzbot is reporting that S_IFMT bits of inode->i_mode can become bogus when the S_IFMT bits of the 32bits "mode" field loaded from disk are corrupted or when the 32bits "attributes" field loaded from disk are corrupted. A documentation says that BFS uses only lower 9 bits of the "mode" field. But I can't find an explicit explanation that the unused upper 23 bits (especially, the S_IFMT bits) are initialized with 0. Therefore, ignore the S_IFMT bits of the "mode" field loaded from disk. Also, verify that the value of the "attributes" field loaded from disk is either BFS_VREG or BFS_VDIR (because BFS supports only regular files and the root directory). | ||||
| CVE-2025-68270 | 1 Openedx | 1 Edx-platform | 2026-04-15 | 9.9 Critical |
| The Open edX Platform is a learning management platform. Prior to commit 05d0d0936daf82c476617257aa6c35f0cd4ca060, CourseLimitedStaffRole users are able to access and edit courses in studio if they are granted the role on an org rather than on a course, and CourseLimitedStaffRole users are able to list courses they have the role on in studio even though they are not meant to have any access on the studio side for the course. Commit 05d0d0936daf82c476617257aa6c35f0cd4ca060 fixes the issue. | ||||