| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: cortina: Fix budget accounting
The gmac_rx() function returns the remaining NAPI budget, but its
caller treats the return value as the number of packets received. An
idle poll therefore reports a full budget and remains scheduled.
Return the number of received packets instead. Preserve the existing
free queue refill accounting by adding that count directly; continuing
to subtract it from the budget would invert the refill behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost/vdpa: reject VRING_NUM larger than device max
vhost_vring_set_num() accepts any non-zero power-of-two queue size that
fits in 16 bits. vhost-vdpa then passes that value to set_vq_num()
without comparing it with get_vq_num_max().
A process with access to /dev/vhost-vdpa-* can therefore configure a
queue larger than the device advertises. With vdpa_sim, the worker can
walk descriptors beyond the mapped descriptor ring. KASAN reports a
16-byte out-of-bounds read, corresponding to one vring_desc, in the
vringh IOTLB path:
BUG: KASAN: out-of-bounds in _copy_from_iter
Read of size 16
copy_from_iotlb
copydesc_iotlb
vringh_getdesc_iotlb
vdpasim_net_work
Cache get_vq_num_max() immediately after reset. Some backends derive
it from writable queue-size state, so querying it after SET_NUM may
return the current size instead of the device capability. Invalidate
the cached value before reset so a failed reset leaves SET_NUM
disabled.
For VHOST_SET_VRING_NUM, copy the complete vring state once and use
the same index and size for validation, vq->num, and set_vq_num().
This ensures that validation and use operate on the same copied values. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_console: do not free control-out buffers on remove
__send_control_msg() publishes &portdev->cpkt as the control-out
virtqueue cookie. remove_vqs() walks every virtqueue and passes leftover
cookies to free_buf(), which treats them as struct port_buffer and
reads sgpages.
If a control message is still on c_ovq when the device is unbound,
free_buf() reads past the ports_device object.
KASAN reported slab-out-of-bounds in free_buf():
free_buf
remove_vqs
virtcons_remove
unbind_store
The object was the ports_device allocated in virtcons_probe().
Drain c_ovq without freeing. The packet lives in portdev and is released
with it. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Cancel special fields when recycling rhtab elements
rhtab_map_update_existing() and rhtab_delete_elem() call
bpf_obj_free_fields() when replacing or deleting a value. These map
operations can run from BPF programs in NMI context, where releasing a
referenced kptr or another complex field is not generally safe.
Array and hash maps avoid that problem by cancelling only the asynchronous
fields which can be stopped safely in the caller context. Other ownership
state remains attached to the allocation until its memory allocator
destructor performs the final cleanup.
Use bpf_obj_cancel_fields() for the corresponding rhtab paths as well. This
cancels timers, workqueues, and task work while allowing rhtab_mem_dtor() to
release referenced kptrs when the allocation is eventually destroyed.
[ kkd: Rebased, used direct helper calls, and rewrote the commit log ] |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check ancestor frames for rbtree callbacks
bpf_rbtree_add() invokes its comparator while the caller holds the root
lock. The native insertion code retains raw parent and link pointers across
the callback, so the verifier prohibits unlocking, consuming tree nodes,
or changing RCU state from that callback.
in_rbtree_lock_required_cb() only checks the innermost verifier frame.
Static subprogram calls are permitted while holding a spin lock, and such a
call pushes a frame without in_callback_fn set. Consequently, all callback
restrictions disappear in the nested frame. The subprogram can unlock the
tree, remove and drop the node being compared, then relock. Native insertion
resumes with the stale parent pointer and links freed memory into the tree.
Walk all active frames for the rbtree callback instead. Benign static
subprograms remain permitted, while callback restrictions follow execution
into nested frames. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_sip: fix OOB read in sip_skip_whitespace()
sip_skip_whitespace() returns dptr unchanged when its own loop
exhausts the buffer (dptr == limit), instead of NULL like its sibling
sip_follow_continuation() returns on its own "no more data" path.
ct_sip_get_header() only checks for NULL after calling it:
dptr = sip_skip_whitespace(dptr, limit);
if (dptr == NULL)
break;
if (*dptr != ':' || ++dptr >= limit)
break;
so a recognized header name followed only by spaces/tabs running to
the exact end of the SIP payload, with no colon, makes the very next
statement read one byte past the buffer.
Make both "no more data" outcomes return NULL, matching the
convention sip_follow_continuation() already uses and that both
existing callers already check for. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix the possible bioc_list memory leak during error
There are two possible ways to leak bioc memory on
btrfs_ordered_extent::bioc_list:
- An error occurred for btrfs_insert_one_raid_extent()
Then the function btrfs_insert_raid_extent() immediately return
without freeing any bioc in the bioc_list.
- An ordered extent hit an IO error
In that case the ordered extent will have BTRFS_ORDERED_IOERR set, and
skip the call on btrfs_insert_raid_extent() completely.
Fix the problem by:
- Introduce a new helper, btrfs_cleanup_ordered_bioc_list()
Which will remove all bioc from the bioc_list, and release the bioc.
- Call the above helper for btrfs_insert_raid_extent()
So that the cleanup helper is always called no matter what.
- Call the above helper for btrfs_finish_one_ordered()
This is called just before the final release on the ordered extent.
This was reported by Sashiko when reviewing another patch. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: backtrack_insn(): Handle ld_{abs,ind} subprog exit edge
Nicholas Carlini reported a bug in precision backtracking mechanism
for BPF_LD | BPF_{IND,ABS} instructions. These instructions are
modelled as two branches:
- fallthrough;
- implicit exit from current subprogram.
The implicit exit case was not handled by the backtrack_insn()
function. When backtracking such a path backtrack_insn() did not
call bt_subprog_enter(), which meant that backtracking continued
manipulating precision marks in a caller frame, while looking at
instructions in a callee frame.
This lead to segmentation faults during verification (see the
selftest), or unsound state pruning. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: detach failed sprout device from transaction update list
When creating the first metadata chunk for a sprout filesystem,
create_chunk() adds the new device to the transaction dev_update_list
through device->post_commit_list.
If the subsequent system chunk creation fails, btrfs_init_new_device()
aborts the transaction and releases the device while post_commit_list is
still linked. This triggers a warning in btrfs_free_device() and leaves
the transaction list referencing freed memory.
Detach the device while holding chunk_mutex before releasing it. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: yc: fix memory leak in acp6x_pdm_dma_close()
acp6x_pdm_dma_close() does not free the runtime->private_data buffer
allocated in acp6x_pdm_dma_open(). Add the missing kfree. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: mcast: use rcu_assign_pointer() for __rcu list updates
Several places in net/ipv6/mcast.c update RCU-protected lists
(np->ipv6_mc_list, idev->mc_list, idev->mc_tomb) using direct pointer
assignments instead of rcu_assign_pointer():
1. In __ipv6_dev_mc_dec(), unlinking a group from idev->mc_list did:
*map = ma->next;
without rcu_assign_pointer() while concurrent readers traverse
idev->mc_list locklessly under rcu_read_lock().
2. In ipv6_sock_mc_drop() and __ipv6_sock_mc_close(), unlinking a group
from np->ipv6_mc_list directly assigned *lnk = mc_lst->next and
np->ipv6_mc_list = mc_lst->next without rcu_assign_pointer(), racing
with lockless readers in inet6_mc_check().
3. In __ipv6_sock_mc_join(), mc_lst->next was initialized to
np->ipv6_mc_list via raw assignment before publishing mc_lst.
4. In mld_del_delrec() and __ipv6_dev_mc_inc(), __rcu source pointers
passed into rcu_assign_pointer() lacked explicit dereference helpers.
Fix these by consistently using rcu_assign_pointer() along with
mc_dereference() / sock_dereference(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_nat_sip: rewind offset when NAT shrinks the packet
sashiko says:
If map_addr() changes the packet length, such as when the public NAT IP
string is shorter or longer than the internal IP, coff will still point to
the offset relative to the pre-mangled packet.
If the packet shrinks, coff could overshoot the correct position,
potentially causing the next ct_sip_parse_header_uri() call to silently
skip bytes and miss subsequent Contact headers. Could this lead to a
failure to NAT those subsequent headers and leak internal network details? |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix transaction overflow during writeback
Commit 95ad8ee45cdb ("ext4: correct the reserved credits for extent
conversion") was correct to note that we need to reserve enough credits
for all extents possibly underlying a large folio. However it was too
eager to reduce the number of reserved credits. Extent conversion may
not only need to touch several leaf extent blocks, it may also need to
split extents - for example a single large unwritten extent may need to
be split into many small written ones in case of sparse folio dirtying.
This can thus result not only in extent leaf modifications but also in a
need to allocate new extent tree nodes. As a result the reserved
transaction credits were not sufficient in some corner cases. Use
ext4_meta_trans_blocks() for correct upper bound credit estimate. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mei: pass correct argument to function
The first argument to iwl_mei_write_cyclic_buf() should be the cldev
but the q_head pointer is passed instead. Fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_ring: fix stale descriptor flags after a failed packed add
In a packed ring the AVAIL and USED bits sit in the descriptor itself,
so writing them makes that descriptor available. Those bit combinations
flip meaning on every round of the ring, tracked by a wrap counter, so
invalidating or validating a descriptor means inverting both bits.
Commit 1ce9e6055fa0 ("virtio_ring: introduce packed ring support") has
virtqueue_add_packed() make every descriptor of a chain available as it
maps the chain, and write the head last. The device consumes the ring in
order and stops at a head that is not available yet, so it never reaches
the rest.
When vring_map_one_sg() fails partway, unmap_release unmaps the segments
and restores avail_used_flags, but the descriptors it wrote to in the
ring stay marked with AVAIL and USED bits. The head is now the only
entry that keeps the device from consuming these stale entries.
For example, the ring would look like this now.
Z - pre-previous command
A - previous command
B - aborted command
C - current command
[A1 DONE] [A2 DONE] <C1 EMPTY> [B2] [B3] [Z1 DONE]
When the driver now attempts to issue the C command, the next add starts
at the same head as B. If C spans less descriptors than B, there is no
end marker because AVAIL and USED bits were still in place. And that
means the device will start interpreting these stale entries (B2/B3) as
another command entry, which then blocks the queue.
This effect typically happens in swiotlb configurations under memory
pressure, because vring_map_one_sg() can then fail with larger I/O
requests which then leads to command abortions.
There are broadly 2 ways to avoid leaving those flags behind:
1) Defer those flags too until the chain is complete.
2) Rewrite those flags for the previous wrap counter.
Implement the second option in both packed add paths. The first option
traverses the chain a second time on every successful add. The second
option invalidates all added descriptors when any add fails.
With this patch applied, a packed virtqueue keeps completing requests
after a failed add. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (ltc4282) Make sure clk_init_data is fully initialized
The clk_init_data structure contains several mutually-exclusive members
for different methods to specify the possible parents of a clock,
prompting drivers to initialize only the members they need. However,
not initializing all members may cause subtle issues, which are only
exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
enabled.
ltc428_clk_provider_setup() does not fill in any parent clocks, and
assumes that init.num_parents is NULL. However, the latter in
uninitialized, and thus may cause a crash.
Make sure all members are fully initialized, to fix such bugs, and to
avoid future breakage when converting drivers to a different method for
specifying the parents. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/riscv: Serialize command queue publishing
Serialize command queue publishing so software producer state advances only
after a command is written and the hardware tail is updated. Wait for
hardware consumption outside the queue lock when the command queue is full
so other CPUs are not blocked behind a long poll. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject non-scalar bpf_loop iteration counts
bpf_loop() declares its nr_loops argument as ARG_ANYTHING. Privileged
programs may pass pointer values to such arguments, so check_func_arg()
lets a pointer-valued R1 reach the helper-specific checks.
Since commit bb124da69c47 ("bpf: keep track of max number of bpf_loop
callback iterations"), the verifier marks R1 precise and reads its upper
bound to limit callback simulation. Precision backtracking only accepts
scalar registers, so passing a pointer instead triggers the "backtracking
misuse" verifier warning. Kernels with panic_on_warn enabled subsequently
panic.
Introduce ARG_SCALAR for helper arguments that only accept scalar values
and use it for bpf_loop() nr_loops. Generic helper argument validation then
rejects pointers before loop inlining and precision processing. |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: fix NULL pointer dereference on unbind with fixed-link
When the device tree describes a fixed-link and has no "mdio" child
node, macb_mii_init() returns early without allocating the MDIO bus,
leaving bp->mii_bus as NULL.
Two cleanup paths then dereference this NULL bus:
1. On driver unbind, macb_remove() unconditionally calls
mdiobus_unregister(bp->mii_bus), which oopses:
Unable to handle kernel NULL pointer dereference at virtual address 00000000000004a8
pc : mdiobus_unregister+0x14/0xa4
lr : macb_remove+0x38/0xa4
Call trace:
mdiobus_unregister+0x14/0xa4 (P)
macb_remove+0x38/0xa4
platform_remove+0x20/0x30
device_release_driver_internal+0x1c8/0x224
unbind_store+0xb4/0xbc
2. On the probe error path in macb_probe(), reached when
macb_mii_init() has succeeded but a subsequent step fails, the
err_out_unregister_mdio label runs the same unconditional cleanup.
mdiobus_unregister() and mdiobus_free() do not guard against a NULL
bus, so guard the calls in both macb_remove() and the probe error
path. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: unregister debugfs entries on teardown
ucsi_register() creates per-instance debugfs entries, but
ucsi_unregister() keeps them around until ucsi_destroy().
Drivers like ucsi_glink that unregister/register the same UCSI
instance across remoteproc restart then try to create an already
existing debugfs directory and log:
debugfs: 'pmic_glink.ucsi.0' already exists in 'ucsi'
Unregister debugfs entries as part of ucsi_unregister(), and
clear ucsi->debugfs after freeing it so repeated unregister
paths remain safe. |
