| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: net1080: validate packet_len before pad-byte access in rx_fixup
For an even packet_len, net1080_rx_fixup() reads the pad byte at
skb->data[packet_len] before the skb->len != packet_len check further
down, and packet_len is only bounded against NC_MAX_PACKET. A malicious
NetChip 1080 device can send a short frame advertising a large even
packet_len (e.g. 0x4000), so the pad-byte read lands past the end of the
skb:
BUG: KASAN: slab-out-of-bounds in net1080_rx_fixup
Read of size 1 at addr ffff8880106c83c6 by task ksoftirqd/0/14
...
net1080_rx_fixup (drivers/net/usb/net1080.c:384)
usbnet_bh (drivers/net/usb/usbnet.c:1589)
process_one_work (kernel/workqueue.c:3322)
bh_worker (kernel/workqueue.c:3708)
tasklet_action (kernel/softirq.c:965)
handle_softirqs (kernel/softirq.c:622)
...
Reject the frame when packet_len >= skb->len before reading. |
| In the Linux kernel, the following vulnerability has been resolved:
net, bpf: check master for NULL in xdp_master_redirect()
xdp_master_redirect() dereferences the result of
netdev_master_upper_dev_get_rcu() without a NULL check, but that helper
returns NULL when the receiving device has no upper-master adjacency.
The reach guard only checks netif_is_bond_slave(). On bond slave release
bond_upper_dev_unlink() drops the upper-master adjacency before clearing
IFF_SLAVE, so an XDP_TX reaching xdp_master_redirect() in that window
still passes netif_is_bond_slave() while master is already NULL, and
faults on master->flags at offset 0xb0:
BUG: kernel NULL pointer dereference, address: 00000000000000b0
RIP: 0010:xdp_master_redirect (net/core/filter.c:4432)
Call Trace:
xdp_master_redirect (net/core/filter.c:4432)
bpf_prog_run_generic_xdp (include/net/xdp.h:700)
do_xdp_generic (net/core/dev.c:5608)
__netif_receive_skb_one_core (net/core/dev.c:6204)
process_backlog (net/core/dev.c:6319)
__napi_poll (net/core/dev.c:7729)
net_rx_action (net/core/dev.c:7792)
handle_softirqs (kernel/softirq.c:622)
__dev_queue_xmit (include/linux/bottom_half.h:33)
packet_sendmsg (net/packet/af_packet.c:3082)
__sys_sendto (net/socket.c:2252)
Kernel panic - not syncing: Fatal exception in interrupt
The missing check dates back to the original code; commit 1921f91298d1
("net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master")
later added the master->flags read where the fault now lands but kept the
unconditional deref. Check master for NULL before use; a NULL master is
treated the same as one that is not up. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix use-after-free of the discoverer in tipc_disc_rcv()
bearer_disable() frees b->disc with tipc_disc_delete()'s plain kfree(),
but tipc_disc_rcv() still dereferences b->disc in RX softirq under
rcu_read_lock() (tipc_udp_recv -> tipc_rcv -> tipc_disc_rcv).
L2 bearers are safe thanks to the synchronize_net() in
tipc_disable_l2_media(), but the UDP bearer defers that call to the
cleanup_bearer() workqueue, so the discoverer is freed with no grace
period:
BUG: KASAN: slab-use-after-free in tipc_disc_rcv (net/tipc/discover.c:149)
Read of size 8 at addr ffff88802348b728 by task poc_tipc/184
<IRQ>
tipc_disc_rcv (net/tipc/discover.c:149)
tipc_rcv (net/tipc/node.c:2126)
tipc_udp_recv (net/tipc/udp_media.c:391)
udp_rcv (net/ipv4/udp.c:2643)
ip_local_deliver_finish (net/ipv4/ip_input.c:241)
</IRQ>
Freed by task 181:
kfree (mm/slub.c:6565)
bearer_disable (net/tipc/bearer.c:418)
tipc_nl_bearer_disable (net/tipc/bearer.c:1001)
The bearer is freed with kfree_rcu(); free the discoverer the same way.
Add an rcu_head to struct tipc_discoverer and free it and its skb from an
RCU callback.
Because the RCU callback (tipc_disc_free_rcu) lives in module text, a
call_rcu() that is still pending when the tipc module is unloaded would
invoke a freed function. Add an rcu_barrier() to tipc_exit() after the
bearer subsystem has been torn down, so all pending discoverer callbacks
have run before the module text goes away.
Reachable from an unprivileged user namespace: the TIPCv2 genl family is
netnsok and its bearer commands have no GENL_ADMIN_PERM. Needs CONFIG_TIPC
and CONFIG_TIPC_MEDIA_UDP. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix UAF in smc_cdc_rx_handler() by pinning the socket
smc_cdc_rx_handler() looks up the connection by token under the link
group's conns_lock, drops the lock, and then dereferences conn and the
smc_sock derived from it, ending in sock_hold(&smc->sk) inside
smc_cdc_msg_recv(). No reference is held across the lock release.
The only reference pinning the socket while the connection is
discoverable in the link group is taken in smc_lgr_register_conn()
(sock_hold) and dropped in __smc_lgr_unregister_conn() (sock_put), both
under conns_lock. Once the handler drops conns_lock, a concurrent
close() -> smc_release() -> smc_conn_free() -> smc_lgr_unregister_conn()
can drop that reference and free the smc_sock, so the handler's later
sock_hold() runs on freed memory:
WARNING: lib/refcount.c:25 at refcount_warn_saturate
Workqueue: rxe_wq do_work
refcount_warn_saturate (lib/refcount.c:25)
smc_cdc_msg_recv (net/smc/smc_cdc.c:430)
smc_cdc_rx_handler (net/smc/smc_cdc.c:502)
smc_wr_rx_tasklet_fn (net/smc/smc_wr.c:445)
tasklet_action_common (kernel/softirq.c:938)
handle_softirqs (kernel/softirq.c:622)
Kernel panic - not syncing: panic_on_warn set
Only SMC-R is affected. The SMC-D receive tasklet is stopped by
tasklet_kill(&conn->rx_tsklet) in smc_conn_free() before the connection
is unregistered, so it cannot run concurrently with the free.
Take the socket reference while still holding conns_lock, so the
registration reference can no longer be the last one, and drop it once
the handler is done. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: Fix potential UAF when ddgst mismatch
Shivam Kumar found via vulnerability testing:
When data digest is enabled on an NVMe/TCP connection and a digest
mismatch occurs on a non-final H2C_DATA PDU during an R2T-based
data transfer, the digest error handler in nvmet_tcp_try_recv_ddgst()
calls nvmet_req_uninit() — which performs percpu_ref_put() on the
submission queue — but does NOT mark the command as completed. It
does not set cqe->status, does not modify rbytes_done, and does not
clear any flag. When the subsequent fatal error triggers queue
teardown, nvmet_tcp_uninit_data_in_cmds() iterates all commands,
checks nvmet_tcp_need_data_in() for each one, and finds that the
already-uninited command still appears to need data (because
rbytes_done < transfer_len and cqe->status == 0). It therefore calls
nvmet_req_uninit() a second time on the same command — a double
percpu_ref_put against a single percpu_ref_get. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: check INIT_FAILED before nvmet_req_uninit in digest error path
In nvmet_tcp_try_recv_ddgst(), when a data digest mismatch is detected,
nvmet_req_uninit() is called unconditionally. However, if the command
arrived via the nvmet_tcp_handle_req_failure() path, nvmet_req_init()
had returned false and percpu_ref_tryget_live() was never executed. The
unconditional percpu_ref_put() inside nvmet_req_uninit() then causes a
refcount underflow, leading to a WARNING in
percpu_ref_switch_to_atomic_rcu, a use-after-free diagnostic, and
eventually a permanent workqueue deadlock.
Check cmd->flags & NVMET_TCP_F_INIT_FAILED before calling
nvmet_req_uninit(), matching the existing pattern in
nvmet_tcp_execute_request(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: reject oversized nested action attrs
Open vSwitch stores generated flow actions as nlattrs, whose nla_len
field is u16. Commit a1e64addf3ff ("net: openvswitch: remove
misbehaving actions length check") allowed the total sw_flow_actions
stream to grow beyond 64 KiB, which is valid, but also removed the last
guard preventing a generated nested action attribute from exceeding
U16_MAX.
An oversized generated container can thus be closed with a truncated
nla_len. A later dump or teardown then walks a structurally different
stream than the one that was validated. In particular, an oversized
nested CLONE/CT action may cause subsequent bytes in the generated
stream to be interpreted as independent actions.
Keep the larger total-action-stream behavior, but make nested action
close reject generated containers that do not fit in nla_len, and return
the error through all callers. For recursive SAMPLE, CLONE, DEC_TTL, and
CHECK_PKT_LEN builders, trim resource-owning action-list tails in reverse
construction order before discarding failed wrappers, so resources copied
into the rejected tails are released before the wrappers are removed.
Most failed outer wrappers are discarded by truncating actions_len after
child resources have been released. CHECK_PKT_LEN also trims its parent
after branch resources are gone. SET/TUNNEL close failures unwind their
known tun_dst ownership directly, and SET_TO_MASKED has no external
ownership and truncates on close failure. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: fix for dma-fence safe access rules
Commit 506aa8b02a8d6 ("dma-fence: Add safe access helpers and document
the rules") details the dma-fence safe access rules. The most common
culprit is that drm_sched_fence_get_timeline_name may race with
group_free_queue. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "arm64: zynqmp: Add an OP-TEE node to the device tree"
This reverts commit 06d22ed6b6635b17551f386b50bb5aaff9b75fbe.
OP-TEE logic in U-Boot automatically injects a reserved-memory
node along with optee firmware node to kernel device tree.
The injection logic is dependent on that there is no manually
defined optee node. Having the node in zynqmp.dtsi effectively
breaks OP-TEE's insertion of the reserved-memory node, causing
memory access violations during runtime. |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: nlink overflow in jfs_rename
If nlink is maximal for a directory (-1) and inside that directory you
perform a rename for some child directory (not moving from the parent),
then the nlink of the first directory is first incremented and later
decremented. Normally this is fine, but when nlink = -1 this causes a
wrap around to 0, and then drop_nlink issues a warning.
After applying the patch syzbot no longer issues any warnings. I also
ran some basic fs tests to look for any regressions. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: handle attr_set_size() errors when truncating files
If attr_set_size() fails while truncating down, the error is silently
ignored and the inode may be left in an inconsistent state. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc4-topology: Correct the allocation size for bytes controls
The size of the data behind of scontrol->ipc_control_data for bytes
controls is:
[1] sizeof(struct sof_ipc4_control_data) + // kernel only struct
[2] sizeof(struct sof_abi_hdr)) + payload
The max_size specifies the size of [2] and it is coming from topology.
Change the function to take this into account and allocate adequate amount
of memory behind scontrol->ipc_control_data.
With the change we will allocate [1] amount more memory to be able to hold
the full size of data. |
| In the Linux kernel, the following vulnerability has been resolved:
rpmsg: core: fix race in driver_override_show() and use core helper
The driver_override_show function reads the driver_override string
without holding the device_lock. However, the store function modifies
and frees the string while holding the device_lock. This creates a race
condition where the string can be freed by the store function while
being read by the show function, leading to a use-after-free.
To fix this, replace the rpmsg_string_attr macro with explicit show and
store functions. The new driver_override_store uses the standard
driver_set_override helper. Since the introduction of
driver_set_override, the comments in include/linux/rpmsg.h have stated
that this helper must be used to set or clear driver_override, but the
implementation was not updated until now.
Because driver_set_override modifies and frees the string while holding
the device_lock, the new driver_override_show now correctly holds the
device_lock during the read operation to prevent the race.
Additionally, since rpmsg_string_attr has only ever been used for
driver_override, removing the macro simplifies the code. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix reservation leak in some error paths when inserting inline extent
If we fail to allocate a path or join a transaction, we return from
__cow_file_range_inline() without freeing the reserved qgroup data,
resulting in a leak. Fix this by ensuring we call btrfs_qgroup_free_data()
in such cases. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Validate sp before freeing associated memory
System crash with the following signature
[154563.214890] nvme nvme2: NVME-FC{1}: controller connect complete
[154564.169363] qla2xxx [0000:b0:00.1]-3002:2: nvme: Sched: Set ZIO exchange threshold to 3.
[154564.169405] qla2xxx [0000:b0:00.1]-ffffff:2: SET ZIO Activity exchange threshold to 5.
[154565.539974] qla2xxx [0000:b0:00.1]-5013:2: RSCN database changed – 0078 0080 0000.
[154565.545744] qla2xxx [0000:b0:00.1]-5013:2: RSCN database changed – 0078 00a0 0000.
[154565.545857] qla2xxx [0000:b0:00.1]-11a2:2: FEC=enabled (data rate).
[154565.552760] qla2xxx [0000:b0:00.1]-11a2:2: FEC=enabled (data rate).
[154565.553079] BUG: kernel NULL pointer dereference, address: 00000000000000f8
[154565.553080] #PF: supervisor read access in kernel mode
[154565.553082] #PF: error_code(0x0000) - not-present page
[154565.553084] PGD 80000010488ab067 P4D 80000010488ab067 PUD 104978a067 PMD 0
[154565.553089] Oops: 0000 1 PREEMPT SMP PTI
[154565.553092] CPU: 10 PID: 858 Comm: qla2xxx_2_dpc Kdump: loaded Tainted: G OE ------- --- 5.14.0-503.11.1.el9_5.x86_64 #1
[154565.553096] Hardware name: HPE Synergy 660 Gen10/Synergy 660 Gen10 Compute Module, BIOS I43 09/30/2024
[154565.553097] RIP: 0010:qla_fab_async_scan.part.0+0x40b/0x870 [qla2xxx]
[154565.553141] Code: 00 00 e8 58 a3 ec d4 49 89 e9 ba 12 20 00 00 4c 89 e6 49 c7 c0 00 ee a8 c0 48 c7 c1 66 c0 a9 c0 bf 00 80 00 10 e8 15 69 00 00 <4c> 8b 8d f8 00 00 00 4d 85 c9 74 35 49 8b 84 24 00 19 00 00 48 8b
[154565.553143] RSP: 0018:ffffb4dbc8aebdd0 EFLAGS: 00010286
[154565.553145] RAX: 0000000000000000 RBX: ffff8ec2cf0908d0 RCX: 0000000000000002
[154565.553147] RDX: 0000000000000000 RSI: ffffffffc0a9c896 RDI: ffffb4dbc8aebd47
[154565.553148] RBP: 0000000000000000 R08: ffffb4dbc8aebd45 R09: 0000000000ffff0a
[154565.553150] R10: 0000000000000000 R11: 000000000000000f R12: ffff8ec2cf0908d0
[154565.553151] R13: ffff8ec2cf090900 R14: 0000000000000102 R15: ffff8ec2cf084000
[154565.553152] FS: 0000000000000000(0000) GS:ffff8ed27f800000(0000) knlGS:0000000000000000
[154565.553154] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[154565.553155] CR2: 00000000000000f8 CR3: 000000113ae0a005 CR4: 00000000007706f0
[154565.553157] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[154565.553158] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[154565.553159] PKRU: 55555554
[154565.553160] Call Trace:
[154565.553162] <TASK>
[154565.553165] ? show_trace_log_lvl+0x1c4/0x2df
[154565.553172] ? show_trace_log_lvl+0x1c4/0x2df
[154565.553177] ? qla_fab_async_scan.part.0+0x40b/0x870 [qla2xxx]
[154565.553215] ? __die_body.cold+0x8/0xd
[154565.553218] ? page_fault_oops+0x134/0x170
[154565.553223] ? snprintf+0x49/0x70
[154565.553229] ? exc_page_fault+0x62/0x150
[154565.553238] ? asm_exc_page_fault+0x22/0x30
Check for sp being non NULL before freeing any associated memory |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtl8xxxu: fix slab-out-of-bounds in rtl8xxxu_sta_add
The driver does not set hw->sta_data_size, which causes mac80211 to
allocate insufficient space for driver private station data in
__sta_info_alloc(). When rtl8xxxu_sta_add() accesses members of
struct rtl8xxxu_sta_info through sta->drv_priv, this results in a
slab-out-of-bounds write.
KASAN report on RISC-V (VisionFive 2) with RTL8192EU adapter:
BUG: KASAN: slab-out-of-bounds in rtl8xxxu_sta_add+0x31c/0x346
Write of size 8 at addr ffffffd6d3e9ae88 by task kworker/u16:0/12
Set hw->sta_data_size to sizeof(struct rtl8xxxu_sta_info) during
probe, similar to how hw->vif_data_size is configured. This ensures
mac80211 allocates sufficient space for the driver's per-station
private data.
Tested on StarFive VisionFive 2 v1.2A board. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ac97: fix a double free in snd_ac97_controller_register()
If ac97_add_adapter() fails, put_device() is the correct way to drop
the device reference. kfree() is not required.
Add kfree() if idr_alloc() fails and in ac97_adapter_release() to do
the cleanup.
Found by code review. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: always detect conflicting inodes when logging inode refs
After rename exchanging (either with the rename exchange operation or
regular renames in multiple non-atomic steps) two inodes and at least
one of them is a directory, we can end up with a log tree that contains
only of the inodes and after a power failure that can result in an attempt
to delete the other inode when it should not because it was not deleted
before the power failure. In some case that delete attempt fails when
the target inode is a directory that contains a subvolume inside it, since
the log replay code is not prepared to deal with directory entries that
point to root items (only inode items).
1) We have directories "dir1" (inode A) and "dir2" (inode B) under the
same parent directory;
2) We have a file (inode C) under directory "dir1" (inode A);
3) We have a subvolume inside directory "dir2" (inode B);
4) All these inodes were persisted in a past transaction and we are
currently at transaction N;
5) We rename the file (inode C), so at btrfs_log_new_name() we update
inode C's last_unlink_trans to N;
6) We get a rename exchange for "dir1" (inode A) and "dir2" (inode B),
so after the exchange "dir1" is inode B and "dir2" is inode A.
During the rename exchange we call btrfs_log_new_name() for inodes
A and B, but because they are directories, we don't update their
last_unlink_trans to N;
7) An fsync against the file (inode C) is done, and because its inode
has a last_unlink_trans with a value of N we log its parent directory
(inode A) (through btrfs_log_all_parents(), called from
btrfs_log_inode_parent()).
8) So we end up with inode B not logged, which now has the old name
of inode A. At copy_inode_items_to_log(), when logging inode A, we
did not check if we had any conflicting inode to log because inode
A has a generation lower than the current transaction (created in
a past transaction);
9) After a power failure, when replaying the log tree, since we find that
inode A has a new name that conflicts with the name of inode B in the
fs tree, we attempt to delete inode B... this is wrong since that
directory was never deleted before the power failure, and because there
is a subvolume inside that directory, attempting to delete it will fail
since replay_dir_deletes() and btrfs_unlink_inode() are not prepared
to deal with dir items that point to roots instead of inodes.
When that happens the mount fails and we get a stack trace like the
following:
[87.2314] BTRFS info (device dm-0): start tree-log replay
[87.2318] BTRFS critical (device dm-0): failed to delete reference to subvol, root 5 inode 256 parent 259
[87.2332] ------------[ cut here ]------------
[87.2338] BTRFS: Transaction aborted (error -2)
[87.2346] WARNING: CPU: 1 PID: 638968 at fs/btrfs/inode.c:4345 __btrfs_unlink_inode+0x416/0x440 [btrfs]
[87.2368] Modules linked in: btrfs loop dm_thin_pool (...)
[87.2470] CPU: 1 UID: 0 PID: 638968 Comm: mount Tainted: G W 6.18.0-rc7-btrfs-next-218+ #2 PREEMPT(full)
[87.2489] Tainted: [W]=WARN
[87.2494] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[87.2514] RIP: 0010:__btrfs_unlink_inode+0x416/0x440 [btrfs]
[87.2538] Code: c0 89 04 24 (...)
[87.2568] RSP: 0018:ffffc0e741f4b9b8 EFLAGS: 00010286
[87.2574] RAX: 0000000000000000 RBX: ffff9d3ec8a6cf60 RCX: 0000000000000000
[87.2582] RDX: 0000000000000002 RSI: ffffffff84ab45a1 RDI: 00000000ffffffff
[87.2591] RBP: ffff9d3ec8a6ef20 R08: 0000000000000000 R09: ffffc0e741f4b840
[87.2599] R10: ffff9d45dc1fffa8 R11: 0000000000000003 R12: ffff9d3ee26d77e0
[87.2608] R13: ffffc0e741f4ba98 R14: ffff9d4458040800 R15: ffff9d44b6b7ca10
[87.2618] FS: 00007f7b9603a840(0000) GS:ffff9d4658982000(0000) knlGS:0000000000000000
[87.
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: NFSv4 file creation neglects setting ACL
An NFSv4 client that sets an ACL with a named principal during file
creation retrieves the ACL afterwards, and finds that it is only a
default ACL (based on the mode bits) and not the ACL that was
requested during file creation. This violates RFC 8881 section
6.4.1.3: "the ACL attribute is set as given".
The issue occurs in nfsd_create_setattr(), which calls
nfsd_attrs_valid() to determine whether to call nfsd_setattr().
However, nfsd_attrs_valid() checks only for iattr changes and
security labels, but not POSIX ACLs. When only an ACL is present,
the function returns false, nfsd_setattr() is skipped, and the
POSIX ACL is never applied to the inode.
Subsequently, when the client retrieves the ACL, the server finds
no POSIX ACL on the inode and returns one generated from the file's
mode bits rather than returning the originally-specified ACL. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Fix race condition when unbinding BOs
Fix 'Memory manager not clean during takedown' warning that occurs
when ivpu_gem_bo_free() removes the BO from the BOs list before it
gets unmapped. Then file_priv_unbind() triggers a warning in
drm_mm_takedown() during context teardown.
Protect the unmapping sequence with bo_list_lock to ensure the BO is
always fully unmapped when removed from the list. This ensures the BO
is either fully unmapped at context teardown time or present on the
list and unmapped by file_priv_unbind(). |
