| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| NVIDIA Jetson Linux contains a vulnerability in the kernel where an attacker may cause an exposure of sensitive information due to a shared microarchitectural predictor state that influences transient execution. A successful exploit of this vulnerability may lead to information disclosure. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vgem-fence: Fix potential deadlock on release
A timer that expires a vgem fence automatically in 10 seconds is now
released with timer_delete_sync() from fence->ops.release() called on last
dma_fence_put(). In some scenarios, it can run in IRQ context, which is
not safe unless TIMER_IRQSAFE is used. One potentially risky scenario was
demonstrated in Intel DRM CI trybot, BAT run on machine bat-adlp-6, while
working on new IGT subtests syncobj_timeline@stress-* as user space
replacements of some problematic test cases of a dma-fence-chain selftest
[1].
[117.004338] ================================
[117.004340] WARNING: inconsistent lock state
[117.004342] 6.17.0-rc7-CI_DRM_17270-g7644974e648c+ #1 Tainted: G S U
[117.004346] --------------------------------
[117.004347] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
[117.004349] swapper/0/0 [HC1[1]:SC1[1]:HE0:SE0] takes:
[117.004352] ffff888138f86aa8 ((&fence->timer)){?.-.}-{0:0}, at: __timer_delete_sync+0x4b/0x190
[117.004361] {HARDIRQ-ON-W} state was registered at:
[117.004363] lock_acquire+0xc4/0x2e0
[117.004366] call_timer_fn+0x80/0x2a0
[117.004368] __run_timers+0x231/0x310
[117.004370] run_timer_softirq+0x76/0xe0
[117.004372] handle_softirqs+0xd4/0x4d0
[117.004375] __irq_exit_rcu+0x13f/0x160
[117.004377] irq_exit_rcu+0xe/0x20
[117.004379] sysvec_apic_timer_interrupt+0xa0/0xc0
[117.004382] asm_sysvec_apic_timer_interrupt+0x1b/0x20
[117.004385] cpuidle_enter_state+0x12b/0x8a0
[117.004388] cpuidle_enter+0x2e/0x50
[117.004393] call_cpuidle+0x22/0x60
[117.004395] do_idle+0x1fd/0x260
[117.004398] cpu_startup_entry+0x29/0x30
[117.004401] start_secondary+0x12d/0x160
[117.004404] common_startup_64+0x13e/0x141
[117.004407] irq event stamp: 2282669
[117.004409] hardirqs last enabled at (2282668): [<ffffffff8289db71>] _raw_spin_unlock_irqrestore+0x51/0x80
[117.004414] hardirqs last disabled at (2282669): [<ffffffff82882021>] sysvec_irq_work+0x11/0xc0
[117.004419] softirqs last enabled at (2254702): [<ffffffff8289fd00>] __do_softirq+0x10/0x18
[117.004423] softirqs last disabled at (2254725): [<ffffffff813d4ddf>] __irq_exit_rcu+0x13f/0x160
[117.004426]
other info that might help us debug this:
[117.004429] Possible unsafe locking scenario:
[117.004432] CPU0
[117.004433] ----
[117.004434] lock((&fence->timer));
[117.004436] <Interrupt>
[117.004438] lock((&fence->timer));
[117.004440]
*** DEADLOCK ***
[117.004443] 1 lock held by swapper/0/0:
[117.004445] #0: ffffc90000003d50 ((&fence->timer)){?.-.}-{0:0}, at: call_timer_fn+0x7a/0x2a0
[117.004450]
stack backtrace:
[117.004453] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G S U 6.17.0-rc7-CI_DRM_17270-g7644974e648c+ #1 PREEMPT(voluntary)
[117.004455] Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER
[117.004455] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR4 RVP, BIOS RPLPFWI1.R00.4035.A00.2301200723 01/20/2023
[117.004456] Call Trace:
[117.004456] <IRQ>
[117.004457] dump_stack_lvl+0x91/0xf0
[117.004460] dump_stack+0x10/0x20
[117.004461] print_usage_bug.part.0+0x260/0x360
[117.004463] mark_lock+0x76e/0x9c0
[117.004465] ? register_lock_class+0x48/0x4a0
[117.004467] __lock_acquire+0xbc3/0x2860
[117.004469] lock_acquire+0xc4/0x2e0
[117.004470] ? __timer_delete_sync+0x4b/0x190
[117.004472] ? __timer_delete_sync+0x4b/0x190
[117.004473] __timer_delete_sync+0x68/0x190
[117.004474] ? __timer_delete_sync+0x4b/0x190
[117.004475] timer_delete_sync+0x10/0x20
[117.004476] vgem_fence_release+0x19/0x30 [vgem]
[117.004478] dma_fence_release+0xc1/0x3b0
[117.004480] ? dma_fence_release+0xa1/0x3b0
[117.004481] dma_fence_chain_release+0xe7/0x130
[117.004483] dma_fence_release+0xc1/0x3b0
[117.004484] ? _raw_spin_unlock_irqrestore+0x27/0x80
[117.004485] dma_fence_chain_irq_work+0x59/0x80
[117.004487] irq_work_single+0x75/0xa0
[117.004490] irq_work_r
---truncated--- |
| The Slotti Ajanvaraus plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'slotti-embed-ga' shortcode in all versions up to, and including, 1.3.1 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| An integer overflow condition exists in Bluetooth Host stack, within the bt_br_acl_recv routine a critical path for processing inbound BR/EDR L2CAP traffic. |
| Improper Neutralization of Argument Delimiters in the TeamViewer_service.exe component of TeamViewer Clients prior version 15.62 for Windows allows an attacker with local unprivileged access on a Windows system to elevate privileges via argument injection. |
| Django-Unicorn adds modern reactive component functionality to Django templates. Affected versions of Django-Unicorn are vulnerable to python class pollution vulnerability. The vulnerability arises from the core functionality `set_property_value`, which can be remotely triggered by users by crafting appropriate component requests and feeding in values of second and third parameter to the vulnerable function, leading to arbitrary changes to the python runtime status. With this finding at least five ways of vulnerability exploitation have been observed, stably resulting in Cross-Site Scripting (XSS), Denial of Service (DoS), and Authentication Bypass attacks in almost every Django-Unicorn-based application. This issue has been addressed in version 0.62.0 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| CometBFT is a distributed, Byzantine fault-tolerant, deterministic state machine replication engine. In the `blocksync` protocol peers send their `base` and `latest` heights when they connect to a new node (`A`), which is syncing to the tip of a network. `base` acts as a lower ground and informs `A` that the peer only has blocks starting from height `base`. `latest` height informs `A` about the latest block in a network. Normally, nodes would only report increasing heights. If `B` fails to provide the latest block, `B` is removed and the `latest` height (target height) is recalculated based on other nodes `latest` heights. The existing code however doesn't check for the case where `B` first reports `latest` height `X` and immediately after height `Y`, where `X > Y`. `A` will be trying to catch up to 2000 indefinitely. This condition requires the introduction of malicious code in the full node first reporting some non-existing `latest` height, then reporting lower `latest` height and nodes which are syncing using `blocksync` protocol. This issue has been patched in versions 1.0.1 and 0.38.17 and all users are advised to upgrade. Operators may attempt to ban malicious peers from the network as a workaround. |
| Open Access Management (OpenAM) is an access management solution. In versions prior to 16.0.0, if the "claims_parameter_supported" parameter is activated, it is possible, thanks to the "oidc-claims-extension.groovy" script, to inject the value of one's choice into a claim contained in the id_token or in the user_info. In the request of an authorize function, a claims parameter containing a JSON file can be injected. This JSON file allows attackers to customize the claims returned by the "id_token" and "user_info" files. This allows for a very wide range of vulnerabilities depending on how clients use claims. For example, if some clients rely on an email field to identify a user, an attacker can choose the email address they want, and therefore assume any identity they choose. Version 16.0.0 fixes the issue. |
| Uncontrolled search path for some Intel(R) Arc™ & Iris(R) Xe graphics software before version 32.0.101.6083/32.0.101.5736 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| Unquoted search path within AMD Cloud Manageability Service can allow a local attacker to escalate privileges, potentially resulting in arbitrary code execution. |
| Tuleap is an Open Source Suite to improve management of software developments and collaboration. Tuleap Community Edition prior to version 16.13.99.1761813675 and Tuleap Enterprise Edition prior to versions 16.13-5 and 16.12-8 don't have cross-site request forgery protection in the management of SVN commit rules and immutable tags. An attacker could use this vulnerability to trick victims into changing the commit rules or immutable tags of a SVN repo. Tuleap Community Edition 16.13.99.1761813675, Tuleap Enterprise Edition 16.13-5, and Tuleap Enterprise Edition 16.12-8 contain a fix for the issue. |
| Incorrect default permissions for some Endurance Gaming Mode software installers may allow an authenticated user to potentially enable escalation of privilege via local access. |
| sudo-rs is a memory safe implementation of sudo and su written in Rust. Starting in version 0.2.7 and prior to version 0.2.10, if a user begins entering a password but does not press return for an extended period, a password timeout may occur. When this happens, the keystrokes that were entered are echoed back to the console. This could reveal partial password information, possibly exposing history files when not carefully handled by the user and on screen, usable for Social Engineering or Pass-By attacks. Version 0.2.10 fixes the issue. |
| Wasmtime is a runtime for WebAssembly. Prior to version 38.0.4, 37.0.3, 36.0.3, and 24.0.5, Wasmtime's Rust embedder API contains an unsound interaction where a WebAssembly shared linear memory could be viewed as a type which provides safe access to the host (Rust) to the contents of the linear memory. This is not sound for shared linear memories, which could be modified in parallel, and this could lead to a data race in the host. Patch releases have been issued for all supported versions of Wasmtime, notably: 24.0.5, 36.0.3, 37.0.3, and 38.0.4. These releases reject creation of shared memories via `Memory::new` and shared memories are now excluded from core dumps. As a workaround, eembeddings affected by this issue should use `SharedMemory::new` instead of `Memory::new` to create shared memories. Affected embeddings should also disable core dumps if they are unable to upgrade. Note that core dumps are disabled by default but the wasm threads proposal (and shared memory) is enabled by default. |
| The FunnelKit WordPress plugin before 3.12.0.1 does not sanitize user input before echoing it back in some of its checkout-related AJAX actions, allowing attackers to conduct reflected XSS attacks against logged-in users. |
| When a WF200/WGM160P device is configured to operate as an Access Point, it may be vulnerable to a denial of service triggered by a malformed packet. The device may recover automatically or require a hard reset. |
| : Modification of Assumed-Immutable Data (MAID) vulnerability in ABB ANC, ABB ANC-L, ABB ANC-mini.This issue affects ANC: through 1.1.4; ANC-L: through 1.1.4; ANC-mini: through 1.1.4. |
| rust-openssl is a set of OpenSSL bindings for the Rust programming language. In affected versions `ssl::select_next_proto` can return a slice pointing into the `server` argument's buffer but with a lifetime bound to the `client` argument. In situations where the `sever` buffer's lifetime is shorter than the `client` buffer's, this can cause a use after free. This could cause the server to crash or to return arbitrary memory contents to the client. The crate`openssl` version 0.10.70 fixes the signature of `ssl::select_next_proto` to properly constrain the output buffer's lifetime to that of both input buffers. Users are advised to upgrade. In standard usage of `ssl::select_next_proto` in the callback passed to `SslContextBuilder::set_alpn_select_callback`, code is only affected if the `server` buffer is constructed *within* the callback. |
| Uncontrolled search path for some Intel(R) oneAPI DPC++/C++ Compiler software before version 2025.0.0 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| : Use of GET Request Method With Sensitive Query Strings vulnerability in ABB ANC, ABB ANC-L, ABB ANC-mini.This issue affects ANC: through 1.1.4; ANC-L: through 1.1.4; ANC-mini: through 1.1.4. |
