| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An ACAP configuration file lacked sufficient input validation, which could allow a path traversal attack leading to potential privilege escalation. This vulnerability can only be exploited if the Axis device is configured to allow the installation of unsigned ACAP applications, and if an attacker convinces the victim to install a malicious ACAP application. |
| The ACAP Application framework could allow privilege escalation through a symlink attack. This vulnerability can only be exploited if the Axis device is configured to allow the installation of unsigned ACAP applications, and if an attacker convinces the victim to install a malicious ACAP application. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: tegra-adma: Fix use-after-free
A use-after-free bug exists in the Tegra ADMA driver when audio streams
are terminated, particularly during XRUN conditions. The issue occurs
when the DMA buffer is freed by tegra_adma_terminate_all() before the
vchan completion tasklet finishes accessing it.
The race condition follows this sequence:
1. DMA transfer completes, triggering an interrupt that schedules the
completion tasklet (tasklet has not executed yet)
2. Audio playback stops, calling tegra_adma_terminate_all() which
frees the DMA buffer memory via kfree()
3. The scheduled tasklet finally executes, calling vchan_complete()
which attempts to access the already-freed memory
Since tasklets can execute at any time after being scheduled, there is
no guarantee that the buffer will remain valid when vchan_complete()
runs.
Fix this by properly synchronizing the virtual channel completion:
- Calling vchan_terminate_vdesc() in tegra_adma_stop() to mark the
descriptors as terminated instead of freeing the descriptor.
- Add the callback tegra_adma_synchronize() that calls
vchan_synchronize() which kills any pending tasklets and frees any
terminated descriptors.
Crash logs:
[ 337.427523] BUG: KASAN: use-after-free in vchan_complete+0x124/0x3b0
[ 337.427544] Read of size 8 at addr ffff000132055428 by task swapper/0/0
[ 337.427562] Call trace:
[ 337.427564] dump_backtrace+0x0/0x320
[ 337.427571] show_stack+0x20/0x30
[ 337.427575] dump_stack_lvl+0x68/0x84
[ 337.427584] print_address_description.constprop.0+0x74/0x2b8
[ 337.427590] kasan_report+0x1f4/0x210
[ 337.427598] __asan_load8+0xa0/0xd0
[ 337.427603] vchan_complete+0x124/0x3b0
[ 337.427609] tasklet_action_common.constprop.0+0x190/0x1d0
[ 337.427617] tasklet_action+0x30/0x40
[ 337.427623] __do_softirq+0x1a0/0x5c4
[ 337.427628] irq_exit+0x110/0x140
[ 337.427633] handle_domain_irq+0xa4/0xe0
[ 337.427640] gic_handle_irq+0x64/0x160
[ 337.427644] call_on_irq_stack+0x20/0x4c
[ 337.427649] do_interrupt_handler+0x7c/0x90
[ 337.427654] el1_interrupt+0x30/0x80
[ 337.427659] el1h_64_irq_handler+0x18/0x30
[ 337.427663] el1h_64_irq+0x7c/0x80
[ 337.427667] cpuidle_enter_state+0xe4/0x540
[ 337.427674] cpuidle_enter+0x54/0x80
[ 337.427679] do_idle+0x2e0/0x380
[ 337.427685] cpu_startup_entry+0x2c/0x70
[ 337.427690] rest_init+0x114/0x130
[ 337.427695] arch_call_rest_init+0x18/0x24
[ 337.427702] start_kernel+0x380/0x3b4
[ 337.427706] __primary_switched+0xc0/0xc8 |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: fix device leaks on compat bind and unbind
Make sure to drop the reference taken when looking up the idxd device as
part of the compat bind and unbind sysfs interface. |
| ACAP applications can gain elevated privileges due to improper input validation, potentially leading to privilege escalation. This vulnerability can only be exploited if the Axis device is configured to allow the installation of unsigned ACAP applications, and if an attacker convinces the victim to install a malicious ACAP application. |
| A malicious ACAP application can gain access to admin-level service account credentials used by legitimate ACAP applications, leading to potential privilege escalation of the malicious ACAP application. This vulnerability can only be exploited if the Axis device is configured to allow the installation of unsigned ACAP applications, and if an attacker convinces the victim to install a malicious ACAP application. |
| An ACAP configuration file has improper permissions, which could allow command injection and potentially lead to privilege escalation. This vulnerability can only be exploited if the Axis device is configured to allow the installation of unsigned ACAP applications, and if an attacker convinces the victim to install a malicious ACAP application. |
| An ACAP configuration file has improper permissions and lacks input validation, which could potentially lead to privilege escalation. This vulnerability can only be exploited if the Axis device is configured to allow the installation of unsigned ACAP applications, and if an attacker convinces the victim to install a malicious ACAP application. |
| Zohocorp ManageEngine Exchange Reporter Plus versions 5723 and below are vulnerable to the Stored XSS Vulnerability in the Mails Deleted or Moved report. |
| Zohocorp ManageEngine Exchange Reporter Plus versions 5723 and below are vulnerable to the Stored XSS Vulnerability in the Folder Message Count and Size report. |
| Zohocorp ManageEngine Exchange Reporter Plus versions 5723 and below are vulnerable to the Stored XSS Vulnerability in the Public Folders report. |
| Zohocorp ManageEngine Exchange Reporter Plus versions 5723 and below are vulnerable to the Stored XSS Vulnerability in the Custom report. |
| Improper Input Validation vulnerability in NETGEAR R6260 and NETGEAR R6850 allows unauthenticated attackers connected to LAN with ability to perform MiTM attacks and control over DNS Server to perform command execution.This issue affects R6260: through 1.1.0.86; R6850: through 1.1.0.86. |
| Improper certificate
validation in firmware update logic in NETGEAR RAX30 (Nighthawk AX5 5-Stream
AX2400 WiFi 6 Router) and RAXE300 (Nighthawk AXE7800 Tri-Band
WiFi 6E Router) allows attackers with the ability to intercept and
tamper traffic destined to the device to execute arbitrary commands on the
device.
Devices
with automatic updates enabled may already have this patch applied. If not,
please check the firmware version and update to the
latest.
Fixed in:
RAX30 firmware
1.0.14.108 or later.
RAXE300 firmware
1.0.9.82 or later |
| Improper input validation
in NETGEAR DGN2200v4 (N300 Wireless ADSL2+ Modem Router) allows attackers with
direct network access to the device to potentially execute code on the device.
Please check the firmware version and update to the latest.
Fixed
in:
DGN2200v4
firmware 1.0.0.132 or later |
| NVIDIA NeMo Framework for all platforms contains a vulnerability in a script, where malicious input created by an attacker may cause improper control of code generation. A successful exploit of this vulnerability may lead to code execution, escalation of privileges, information disclosure, and data tampering. |
| NVIDIA NeMo Framework for all platforms contains a vulnerability in the bert services component where malicious data created by an attacker may cause a code injection. A successful exploit of this vulnerability may lead to Code execution, Escalation of privileges, Information disclosure, and Data tampering. |
| Uncontrolled search path for some Intel(R) CIP software before version WIN_DCA_2.4.0.11001 within Ring 3: User Applications may allow an escalation of privilege. Unprivileged software adversary with an authenticated user combined with a high complexity attack may enable local code execution. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires active user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| External control of file name or path for some Intel(R) CIP software before version WIN_DCA_2.4.0.11001 within Ring 3: User Applications may allow an escalation of privilege. Unprivileged software adversary with a privileged user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (low) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Improper input validation for some Intel(R) CIP software before version WIN_DCA_2.4.0.11001 within Ring 3: User Applications may allow an escalation of privilege. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via network access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
