| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: renesas_usbhs: Flush the notify_hotplug_work
When performing continuous unbind/bind operations on the USB drivers
available on the Renesas RZ/G2L SoC, a kernel crash with the message
"Unable to handle kernel NULL pointer dereference at virtual address"
may occur. This issue points to the usbhsc_notify_hotplug() function.
Flush the delayed work to avoid its execution when driver resources are
unavailable. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: atm: cxacru: fix a flaw in existing endpoint checks
Syzbot once again identified a flaw in usb endpoint checking, see [1].
This time the issue stems from a commit authored by me (2eabb655a968
("usb: atm: cxacru: fix endpoint checking in cxacru_bind()")).
While using usb_find_common_endpoints() may usually be enough to
discard devices with wrong endpoints, in this case one needs more
than just finding and identifying the sufficient number of endpoints
of correct types - one needs to check the endpoint's address as well.
Since cxacru_bind() fills URBs with CXACRU_EP_CMD address in mind,
switch the endpoint verification approach to usb_check_XXX_endpoints()
instead to fix incomplete ep testing.
[1] Syzbot report:
usb 5-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 0 PID: 1378 at drivers/usb/core/urb.c:504 usb_submit_urb+0xc4e/0x18c0 drivers/usb/core/urb.c:503
...
RIP: 0010:usb_submit_urb+0xc4e/0x18c0 drivers/usb/core/urb.c:503
...
Call Trace:
<TASK>
cxacru_cm+0x3c8/0xe50 drivers/usb/atm/cxacru.c:649
cxacru_card_status drivers/usb/atm/cxacru.c:760 [inline]
cxacru_bind+0xcf9/0x1150 drivers/usb/atm/cxacru.c:1223
usbatm_usb_probe+0x314/0x1d30 drivers/usb/atm/usbatm.c:1058
cxacru_usb_probe+0x184/0x220 drivers/usb/atm/cxacru.c:1377
usb_probe_interface+0x641/0xbb0 drivers/usb/core/driver.c:396
really_probe+0x2b9/0xad0 drivers/base/dd.c:658
__driver_probe_device+0x1a2/0x390 drivers/base/dd.c:800
driver_probe_device+0x50/0x430 drivers/base/dd.c:830
... |
| In the Linux kernel, the following vulnerability has been resolved:
slimbus: messaging: Free transaction ID in delayed interrupt scenario
In case of interrupt delay for any reason, slim_do_transfer()
returns timeout error but the transaction ID (TID) is not freed.
This results into invalid memory access inside
qcom_slim_ngd_rx_msgq_cb() due to invalid TID.
Fix the issue by freeing the TID in slim_do_transfer() before
returning timeout error to avoid invalid memory access.
Call trace:
__memcpy_fromio+0x20/0x190
qcom_slim_ngd_rx_msgq_cb+0x130/0x290 [slim_qcom_ngd_ctrl]
vchan_complete+0x2a0/0x4a0
tasklet_action_common+0x274/0x700
tasklet_action+0x28/0x3c
_stext+0x188/0x620
run_ksoftirqd+0x34/0x74
smpboot_thread_fn+0x1d8/0x464
kthread+0x178/0x238
ret_from_fork+0x10/0x20
Code: aa0003e8 91000429 f100044a 3940002b (3800150b)
---[ end trace 0fe00bec2b975c99 ]---
Kernel panic - not syncing: Oops: Fatal exception in interrupt. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/amd_nb: Use rdmsr_safe() in amd_get_mmconfig_range()
Xen doesn't offer MSR_FAM10H_MMIO_CONF_BASE to all guests. This results
in the following warning:
unchecked MSR access error: RDMSR from 0xc0010058 at rIP: 0xffffffff8101d19f (xen_do_read_msr+0x7f/0xa0)
Call Trace:
xen_read_msr+0x1e/0x30
amd_get_mmconfig_range+0x2b/0x80
quirk_amd_mmconfig_area+0x28/0x100
pnp_fixup_device+0x39/0x50
__pnp_add_device+0xf/0x150
pnp_add_device+0x3d/0x100
pnpacpi_add_device_handler+0x1f9/0x280
acpi_ns_get_device_callback+0x104/0x1c0
acpi_ns_walk_namespace+0x1d0/0x260
acpi_get_devices+0x8a/0xb0
pnpacpi_init+0x50/0x80
do_one_initcall+0x46/0x2e0
kernel_init_freeable+0x1da/0x2f0
kernel_init+0x16/0x1b0
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1b/0x30
based on quirks for a "PNP0c01" device. Treating MMCFG as disabled is the
right course of action, so no change is needed there.
This was most likely exposed by fixing the Xen MSR accessors to not be
silently-safe. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: regulatory: improve invalid hints checking
Syzbot keeps reporting an issue [1] that occurs when erroneous symbols
sent from userspace get through into user_alpha2[] via
regulatory_hint_user() call. Such invalid regulatory hints should be
rejected.
While a sanity check from commit 47caf685a685 ("cfg80211: regulatory:
reject invalid hints") looks to be enough to deter these very cases,
there is a way to get around it due to 2 reasons.
1) The way isalpha() works, symbols other than latin lower and
upper letters may be used to determine a country/domain.
For instance, greek letters will also be considered upper/lower
letters and for such characters isalpha() will return true as well.
However, ISO-3166-1 alpha2 codes should only hold latin
characters.
2) While processing a user regulatory request, between
reg_process_hint_user() and regulatory_hint_user() there happens to
be a call to queue_regulatory_request() which modifies letters in
request->alpha2[] with toupper(). This works fine for latin symbols,
less so for weird letter characters from the second part of _ctype[].
Syzbot triggers a warning in is_user_regdom_saved() by first sending
over an unexpected non-latin letter that gets malformed by toupper()
into a character that ends up failing isalpha() check.
Prevent this by enhancing is_an_alpha2() to ensure that incoming
symbols are latin letters and nothing else.
[1] Syzbot report:
------------[ cut here ]------------
Unexpected user alpha2: A�
WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 is_user_regdom_saved net/wireless/reg.c:440 [inline]
WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_alpha2 net/wireless/reg.c:3424 [inline]
WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516
Modules linked in:
CPU: 1 UID: 0 PID: 964 Comm: kworker/1:2 Not tainted 6.12.0-rc5-syzkaller-00044-gc1e939a21eb1 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: events_power_efficient crda_timeout_work
RIP: 0010:is_user_regdom_saved net/wireless/reg.c:440 [inline]
RIP: 0010:restore_alpha2 net/wireless/reg.c:3424 [inline]
RIP: 0010:restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516
...
Call Trace:
<TASK>
crda_timeout_work+0x27/0x50 net/wireless/reg.c:542
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa65/0x1850 kernel/workqueue.c:3310
worker_thread+0x870/0xd30 kernel/workqueue.c:3391
kthread+0x2f2/0x390 kernel/kthread.c:389
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: reject cooked mode if it is set along with other flags
It is possible to set both MONITOR_FLAG_COOK_FRAMES and MONITOR_FLAG_ACTIVE
flags simultaneously on the same monitor interface from the userspace. This
causes a sub-interface to be created with no IEEE80211_SDATA_IN_DRIVER bit
set because the monitor interface is in the cooked state and it takes
precedence over all other states. When the interface is then being deleted
the kernel calls WARN_ONCE() from check_sdata_in_driver() because of missing
that bit.
Fix this by rejecting MONITOR_FLAG_COOK_FRAMES if it is set along with
other flags.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: limit printed string from FW file
There's no guarantee here that the file is always with a
NUL-termination, so reading the string may read beyond the
end of the TLV. If that's the last TLV in the file, it can
perhaps even read beyond the end of the file buffer.
Fix that by limiting the print format to the size of the
buffer we have. |
| In the Linux kernel, the following vulnerability has been resolved:
caif_virtio: fix wrong pointer check in cfv_probe()
del_vqs() frees virtqueues, therefore cfv->vq_tx pointer should be checked
for NULL before calling it, not cfv->vdev. Also the current implementation
is redundant because the pointer cfv->vdev is dereferenced before it is
checked for NULL.
Fix this by checking cfv->vq_tx for NULL instead of cfv->vdev before
calling del_vqs(). |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Avoid potential division by zero in function_stat_show()
Check whether denominator expression x * (x - 1) * 1000 mod {2^32, 2^64}
produce zero and skip stddev computation in that case.
For now don't care about rec->counter * rec->counter overflow because
rec->time * rec->time overflow will likely happen earlier. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, test_run: Fix use-after-free issue in eth_skb_pkt_type()
KMSAN reported a use-after-free issue in eth_skb_pkt_type()[1]. The
cause of the issue was that eth_skb_pkt_type() accessed skb's data
that didn't contain an Ethernet header. This occurs when
bpf_prog_test_run_xdp() passes an invalid value as the user_data
argument to bpf_test_init().
Fix this by returning an error when user_data is less than ETH_HLEN in
bpf_test_init(). Additionally, remove the check for "if (user_size >
size)" as it is unnecessary.
[1]
BUG: KMSAN: use-after-free in eth_skb_pkt_type include/linux/etherdevice.h:627 [inline]
BUG: KMSAN: use-after-free in eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165
eth_skb_pkt_type include/linux/etherdevice.h:627 [inline]
eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165
__xdp_build_skb_from_frame+0x5a8/0xa50 net/core/xdp.c:635
xdp_recv_frames net/bpf/test_run.c:272 [inline]
xdp_test_run_batch net/bpf/test_run.c:361 [inline]
bpf_test_run_xdp_live+0x2954/0x3330 net/bpf/test_run.c:390
bpf_prog_test_run_xdp+0x148e/0x1b10 net/bpf/test_run.c:1318
bpf_prog_test_run+0x5b7/0xa30 kernel/bpf/syscall.c:4371
__sys_bpf+0x6a6/0xe20 kernel/bpf/syscall.c:5777
__do_sys_bpf kernel/bpf/syscall.c:5866 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5864 [inline]
__x64_sys_bpf+0xa4/0xf0 kernel/bpf/syscall.c:5864
x64_sys_call+0x2ea0/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:322
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
free_pages_prepare mm/page_alloc.c:1056 [inline]
free_unref_page+0x156/0x1320 mm/page_alloc.c:2657
__free_pages+0xa3/0x1b0 mm/page_alloc.c:4838
bpf_ringbuf_free kernel/bpf/ringbuf.c:226 [inline]
ringbuf_map_free+0xff/0x1e0 kernel/bpf/ringbuf.c:235
bpf_map_free kernel/bpf/syscall.c:838 [inline]
bpf_map_free_deferred+0x17c/0x310 kernel/bpf/syscall.c:862
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa2b/0x1b60 kernel/workqueue.c:3310
worker_thread+0xedf/0x1550 kernel/workqueue.c:3391
kthread+0x535/0x6b0 kernel/kthread.c:389
ret_from_fork+0x6e/0x90 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
CPU: 1 UID: 0 PID: 17276 Comm: syz.1.16450 Not tainted 6.12.0-05490-g9bb88c659673 #8
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: core: flush gadget workqueue after device removal
device_del() can lead to new work being scheduled in gadget->work
workqueue. This is observed, for example, with the dwc3 driver with the
following call stack:
device_del()
gadget_unbind_driver()
usb_gadget_disconnect_locked()
dwc3_gadget_pullup()
dwc3_gadget_soft_disconnect()
usb_gadget_set_state()
schedule_work(&gadget->work)
Move flush_work() after device_del() to ensure the workqueue is cleaned
up. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: fastrpc: Fix copy buffer page size
For non-registered buffer, fastrpc driver copies the buffer and
pass it to the remote subsystem. There is a problem with current
implementation of page size calculation which is not considering
the offset in the calculation. This might lead to passing of
improper and out-of-bounds page size which could result in
memory issue. Calculate page start and page end using the offset
adjusted address instead of absolute address. |
| In the Linux kernel, the following vulnerability has been resolved:
nbd: don't allow reconnect after disconnect
Following process can cause nbd_config UAF:
1) grab nbd_config temporarily;
2) nbd_genl_disconnect() flush all recv_work() and release the
initial reference:
nbd_genl_disconnect
nbd_disconnect_and_put
nbd_disconnect
flush_workqueue(nbd->recv_workq)
if (test_and_clear_bit(NBD_RT_HAS_CONFIG_REF, ...))
nbd_config_put
-> due to step 1), reference is still not zero
3) nbd_genl_reconfigure() queue recv_work() again;
nbd_genl_reconfigure
config = nbd_get_config_unlocked(nbd)
if (!config)
-> succeed
if (!test_bit(NBD_RT_BOUND, ...))
-> succeed
nbd_reconnect_socket
queue_work(nbd->recv_workq, &args->work)
4) step 1) release the reference;
5) Finially, recv_work() will trigger UAF:
recv_work
nbd_config_put(nbd)
-> nbd_config is freed
atomic_dec(&config->recv_threads)
-> UAF
Fix the problem by clearing NBD_RT_BOUND in nbd_genl_disconnect(), so
that nbd_genl_reconfigure() will fail. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: do not force clear folio if buffer is referenced
Patch series "nilfs2: protect busy buffer heads from being force-cleared".
This series fixes the buffer head state inconsistency issues reported by
syzbot that occurs when the filesystem is corrupted and falls back to
read-only, and the associated buffer head use-after-free issue.
This patch (of 2):
Syzbot has reported that after nilfs2 detects filesystem corruption and
falls back to read-only, inconsistencies in the buffer state may occur.
One of the inconsistencies is that when nilfs2 calls mark_buffer_dirty()
to set a data or metadata buffer as dirty, but it detects that the buffer
is not in the uptodate state:
WARNING: CPU: 0 PID: 6049 at fs/buffer.c:1177 mark_buffer_dirty+0x2e5/0x520
fs/buffer.c:1177
...
Call Trace:
<TASK>
nilfs_palloc_commit_alloc_entry+0x4b/0x160 fs/nilfs2/alloc.c:598
nilfs_ifile_create_inode+0x1dd/0x3a0 fs/nilfs2/ifile.c:73
nilfs_new_inode+0x254/0x830 fs/nilfs2/inode.c:344
nilfs_mkdir+0x10d/0x340 fs/nilfs2/namei.c:218
vfs_mkdir+0x2f9/0x4f0 fs/namei.c:4257
do_mkdirat+0x264/0x3a0 fs/namei.c:4280
__do_sys_mkdirat fs/namei.c:4295 [inline]
__se_sys_mkdirat fs/namei.c:4293 [inline]
__x64_sys_mkdirat+0x87/0xa0 fs/namei.c:4293
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The other is when nilfs_btree_propagate(), which propagates the dirty
state to the ancestor nodes of a b-tree that point to a dirty buffer,
detects that the origin buffer is not dirty, even though it should be:
WARNING: CPU: 0 PID: 5245 at fs/nilfs2/btree.c:2089
nilfs_btree_propagate+0xc79/0xdf0 fs/nilfs2/btree.c:2089
...
Call Trace:
<TASK>
nilfs_bmap_propagate+0x75/0x120 fs/nilfs2/bmap.c:345
nilfs_collect_file_data+0x4d/0xd0 fs/nilfs2/segment.c:587
nilfs_segctor_apply_buffers+0x184/0x340 fs/nilfs2/segment.c:1006
nilfs_segctor_scan_file+0x28c/0xa50 fs/nilfs2/segment.c:1045
nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1216 [inline]
nilfs_segctor_collect fs/nilfs2/segment.c:1540 [inline]
nilfs_segctor_do_construct+0x1c28/0x6b90 fs/nilfs2/segment.c:2115
nilfs_segctor_construct+0x181/0x6b0 fs/nilfs2/segment.c:2479
nilfs_segctor_thread_construct fs/nilfs2/segment.c:2587 [inline]
nilfs_segctor_thread+0x69e/0xe80 fs/nilfs2/segment.c:2701
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Both of these issues are caused by the callbacks that handle the
page/folio write requests, forcibly clear various states, including the
working state of the buffers they hold, at unexpected times when they
detect read-only fallback.
Fix these issues by checking if the buffer is referenced before clearing
the page/folio state, and skipping the clear if it is. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: xilinx: Convert gpio_lock to raw spinlock
irq_chip functions may be called in raw spinlock context. Therefore, we
must also use a raw spinlock for our own internal locking.
This fixes the following lockdep splat:
[ 5.349336] =============================
[ 5.353349] [ BUG: Invalid wait context ]
[ 5.357361] 6.13.0-rc5+ #69 Tainted: G W
[ 5.363031] -----------------------------
[ 5.367045] kworker/u17:1/44 is trying to lock:
[ 5.371587] ffffff88018b02c0 (&chip->gpio_lock){....}-{3:3}, at: xgpio_irq_unmask (drivers/gpio/gpio-xilinx.c:433 (discriminator 8))
[ 5.380079] other info that might help us debug this:
[ 5.385138] context-{5:5}
[ 5.387762] 5 locks held by kworker/u17:1/44:
[ 5.392123] #0: ffffff8800014958 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work (kernel/workqueue.c:3204)
[ 5.402260] #1: ffffffc082fcbdd8 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work (kernel/workqueue.c:3205)
[ 5.411528] #2: ffffff880172c900 (&dev->mutex){....}-{4:4}, at: __device_attach (drivers/base/dd.c:1006)
[ 5.419929] #3: ffffff88039c8268 (request_class#2){+.+.}-{4:4}, at: __setup_irq (kernel/irq/internals.h:156 kernel/irq/manage.c:1596)
[ 5.428331] #4: ffffff88039c80c8 (lock_class#2){....}-{2:2}, at: __setup_irq (kernel/irq/manage.c:1614)
[ 5.436472] stack backtrace:
[ 5.439359] CPU: 2 UID: 0 PID: 44 Comm: kworker/u17:1 Tainted: G W 6.13.0-rc5+ #69
[ 5.448690] Tainted: [W]=WARN
[ 5.451656] Hardware name: xlnx,zynqmp (DT)
[ 5.455845] Workqueue: events_unbound deferred_probe_work_func
[ 5.461699] Call trace:
[ 5.464147] show_stack+0x18/0x24 C
[ 5.467821] dump_stack_lvl (lib/dump_stack.c:123)
[ 5.471501] dump_stack (lib/dump_stack.c:130)
[ 5.474824] __lock_acquire (kernel/locking/lockdep.c:4828 kernel/locking/lockdep.c:4898 kernel/locking/lockdep.c:5176)
[ 5.478758] lock_acquire (arch/arm64/include/asm/percpu.h:40 kernel/locking/lockdep.c:467 kernel/locking/lockdep.c:5851 kernel/locking/lockdep.c:5814)
[ 5.482429] _raw_spin_lock_irqsave (include/linux/spinlock_api_smp.h:111 kernel/locking/spinlock.c:162)
[ 5.486797] xgpio_irq_unmask (drivers/gpio/gpio-xilinx.c:433 (discriminator 8))
[ 5.490737] irq_enable (kernel/irq/internals.h:236 kernel/irq/chip.c:170 kernel/irq/chip.c:439 kernel/irq/chip.c:432 kernel/irq/chip.c:345)
[ 5.494060] __irq_startup (kernel/irq/internals.h:241 kernel/irq/chip.c:180 kernel/irq/chip.c:250)
[ 5.497645] irq_startup (kernel/irq/chip.c:270)
[ 5.501143] __setup_irq (kernel/irq/manage.c:1807)
[ 5.504728] request_threaded_irq (kernel/irq/manage.c:2208) |
| IBM Db2 for Linux, UNIX and Windows (includes DB2 Connect Server) 11.5.0 through 11.5.9 and 12.1.0 through 12.1.1 could allow an authenticated user in federation environment, to cause a denial of service due to insufficient release of allocated memory after usage. |
| IBM Db2 for Linux, UNIX and Windows (includes DB2 Connect Server) 11.5.0 through 11.5.9 and 12.1.0 through 12.1.1
could allow an authenticated user to cause a denial of service when connecting to a z/OS database due to improper handling of automatic client rerouting. |
| IBM Db2 for Linux, UNIX and Windows (includes DB2 Connect Server) 11.5.0 through 11.5.9 and 12.1.0 through 12.1.1
under specific configurations could allow an authenticated user to cause a denial of service due to insufficient release of allocated memory resources. |
| BeyondTrust Privileged Remote Access (PRA) versions prior to 25.1 are vulnerable to a local authentication bypass. A local authenticated attacker can view the connection details of a ShellJump session that was initiated with external tools, allowing unauthorized access to connected sessions. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: Explicitly verify target vCPU is online in kvm_get_vcpu()
Explicitly verify the target vCPU is fully online _prior_ to clamping the
index in kvm_get_vcpu(). If the index is "bad", the nospec clamping will
generate '0', i.e. KVM will return vCPU0 instead of NULL.
In practice, the bug is unlikely to cause problems, as it will only come
into play if userspace or the guest is buggy or misbehaving, e.g. KVM may
send interrupts to vCPU0 instead of dropping them on the floor.
However, returning vCPU0 when it shouldn't exist per online_vcpus is
problematic now that KVM uses an xarray for the vCPUs array, as KVM needs
to insert into the xarray before publishing the vCPU to userspace (see
commit c5b077549136 ("KVM: Convert the kvm->vcpus array to a xarray")),
i.e. before vCPU creation is guaranteed to succeed.
As a result, incorrectly providing access to vCPU0 will trigger a
use-after-free if vCPU0 is dereferenced and kvm_vm_ioctl_create_vcpu()
bails out of vCPU creation due to an error and frees vCPU0. Commit
afb2acb2e3a3 ("KVM: Fix vcpu_array[0] races") papered over that issue, but
in doing so introduced an unsolvable teardown conundrum. Preventing
accesses to vCPU0 before it's fully online will allow reverting commit
afb2acb2e3a3, without re-introducing the vcpu_array[0] UAF race. |
