| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: mux: Fix channel node leak on adapter add failure
i2c_mux_add_adapter() takes a reference to the Device Tree channel node
before registering the new adapter. If adapter registration fails, the
error path frees the private data without dropping that reference.
Release the channel node before freeing the private data. |
| In the Linux kernel, the following vulnerability has been resolved:
xhci: fix lost bounce buffers on TDs spanning several ring segments
When a TD reaches a link TRB with data that is not aligned to the
endpoint's wMaxPacketSize, xhci_align_td() stages the unalignable tail
through the bounce buffer of the ring segment holding that link TRB.
xhci_unmap_td_bounce_buffer() later unmaps it and, for IN transfers,
copies the data back into the URB's buffer.
The enqueue path records the segment that was bounced in td->bounce_seg,
under the assumption that a TD never spans more than two ring segments.
That assumption does not hold: a TD large enough to span three or more
segments crosses several link TRBs and can be bounced at each of them.
Only the last one survives in td->bounce_seg, so every earlier bounce
buffer is neither copied back nor DMA unmapped.
The URB still completes with actual_length equal to the requested length
and no error, so the transfer looks successful while a wMaxPacketSize
sized hole in the destination buffer silently keeps its previous
contents. It also leaks a DMA mapping per dropped bounce.
Any sufficiently large and fragmented bulk transfer can hit this. It was
found with a USB mass storage device behind xHCI backing a dm-verity
target with 512 byte hash blocks, where the stale data is detected rather
than silently consumed. The device enumerates as SuperSpeed, so
wMaxPacketSize is 1024, while dm-bufio issues one 512 byte bio per hash
block. verity_prefetch_io() makes the block layer merge hundreds of them
into a single request of up to 512 scatterlist entries of 512 bytes each.
At 256 TRBs per ring segment such a TD spans three segments, and every
segment boundary falls on an odd multiple of 512, i.e. unaligned to
wMaxPacketSize. dm-bufio then caches a hash block holding stale data and
dm-verity declares the metadata block corrupted:
device-mapper: verity: 8:2: metadata block 10850 is corrupted
A reproducer running this under qemu is available at
https://github.com/baloo/xhci-verity
The bounce state (bounce_buf, bounce_dma, bounce_len, bounce_offs)
already lives on the ring segment, so there is nothing extra to track.
Keep recording the last bounced segment in td->bounce_seg and, on
completion, walk the segments from td->start_seg up to it, unmapping
every segment that still has a pending bounce.
Stopping at td->bounce_seg rather than td->end_seg matters: a bounce
implies the TD continues past that segment's link TRB, so bounce_seg is
always strictly before end_seg, and a later TD may already have started
in end_seg and been bounced there. Walking that far would copy a foreign
bounce buffer into this URB and unmap it twice. It also keeps the walk
correct if a TD ever wraps the whole ring so that end_seg == start_seg.
[mn: Add ring->num_segs check to prevent unlikely infinite for loop.] |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: hd3ss3220: track VBUS enable state per consumer
regulator_is_enabled() reports the aggregate regulator state, not
whether this consumer holds an enable reference. If another consumer
enables VBUS first, the driver can skip its own regulator_enable() call
and later attempt to drop a reference it never acquired, triggering an
unbalanced regulator disable warning.
Track successful enable and disable calls locally. Keep the state
unchanged when an operation fails so a later role or ID notification
retries the operation while this consumer keeps balanced references. |
| In the Linux kernel, the following vulnerability has been resolved:
media: cedrus: fix memory leak in cedrus_init_ctrls()
In cedrus_init_ctrls(), the V4L2 control handler is initialized before
allocating memory for ctx->ctrls. If this allocation fails, the function
returns -ENOMEM without freeing the previously allocated handler
resources, leading to a memory leak.
Fix this by calling v4l2_ctrl_handler_free() on the ctx->ctrls allocation
failure path.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings. As we do not have an
Allwinner SoC or board with a Cedrus VPU available to test with, no
runtime testing was able to be performed. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: ltrf216a: fix runtime PM reference leak in error path
ltrf216a_get_lux() acquires a runtime PM reference by calling
ltrf216a_set_power_state(data, true). However, if
ltrf216a_read_data() fails, the function returns immediately without
dropping the reference.
This leaves the runtime PM usage count unbalanced, preventing the device
from autosuspending after a failed read.
Fix this by releasing the runtime PM reference before returning from the
error path. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: mtdoops: free page bitmap when the backing MTD is removed
mtdoops_notify_add() allocates oops_page_used when the configured MTD
device is registered. mtdoops_notify_remove() detaches from that device
but leaves the bitmap allocated. If the same MTD device is later
registered again, the add path allocates a new bitmap and overwrites the
old pointer, leaking one vmalloc allocation per remove/add cycle.
This is only visible when the backing MTD device can disappear and be
registered again while mtdoops remains loaded, so the usual static MTD
case does not expose it.
Free the bitmap after unregistering the dumper and flushing the pending
workers, then clear the pointer and page count before a later attach can
allocate fresh state. Clearing the pointer also keeps the module exit
path from freeing the same bitmap a second time after a remove event. |
| RMCP is an official Rust SDK for the Model Context Protocol. Prior to 2.0.0, the rmcp crate's stateful Streamable HTTP server in crates/rmcp/src/transport/streamable_http_server/tower.rs allows an unauthenticated client to send a well-formed JSON-RPC POST that is not an initialization request, or an initialization request with a mismatched protocol header, causing StreamableHttpService::handle_post to call LocalSessionManager.create_session before validating the message. An early validation failure returns without removing the inserted LocalSessionHandle from LocalSessionManager.sessions, permanently retaining session and channel state for the server process lifetime. Repeated requests can grow the shared session table without bound, degrade legitimate-client latency through lock contention, exhaust memory, and terminate the server. This issue is fixed in version 2.0.0. |
| vLLM is an inference and serving engine for large language models. Prior to 0.28.0, request bodies for Chat Completions and Responses can set media_io_kwargs.video.video_backend to pynvvideocodec, and MediaConnector.fetch_video forwards that choice to VideoMediaIO even when startup configuration selected a software decoder. The engine's _reserve_mm_ipc_gpu_memory logic budgets decoder memory only from static configuration, so the request-selected VIDEO_LOADER_REGISTRY backend can create a CUDA context, decoder surfaces, and decoded-frame allocations that were not removed from the engine's KV-cache budget. An attacker able to submit video requests to a video-capable GPU deployment with PyNvVideoCodec installed can exhaust shared GPU memory, causing request failures, worker crashes, or denial of service. The first release containing the fix is version 0.28.0. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix old_data leak in guest debug error path
__import_wp_info() allocates a per-watchpoint old_data buffer to back up
the original guest memory contents. If a later watchpoint of the same
KVM_SET_GUEST_DEBUG request fails to import, kvm_s390_import_bp_data()
jumps to the error label, which frees the wp_info array but not the
old_data buffers of the entries that were imported successfully. Up to
MAX_BP_COUNT - 1 buffers of up to MAX_WP_SIZE bytes are leaked per failed
request, and the request can be repeated.
Create error handling for cleaning up all created old_data memory
areas. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix memory leak in guest debug handling
bp_data is freed only for the error case by kfree(bp_data).
Every successful KVM_SET_GUEST_DEBUG will leak bp_data. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rtl2832_sdr: release URBs and stream buffers on start_streaming() failure
rtl2832_sdr_start_streaming() calls rtl2832_sdr_alloc_stream_bufs(),
rtl2832_sdr_alloc_urbs() and rtl2832_sdr_submit_urbs() in sequence and
shares a single err: label that only unlocks the mutex and returns.
When alloc_urbs() succeeds but submit_urbs() fails, or when alloc_urbs()
itself returns -ENOMEM after alloc_stream_bufs() has already succeeded,
the URBs and/or the coherent DMA stream buffers stay allocated while
streaming reports failure to vb2. Two latent defects follow on the next
VIDIOC_STREAMON:
1) rtl2832_sdr_alloc_stream_bufs() unconditionally resets dev->buf_num
to 0 and overwrites dev->buf_list[]/dev->dma_addr[], permanently
leaking the coherent DMA memory allocated by the previous attempt.
2) rtl2832_sdr_alloc_urbs() never resets dev->urbs_initialized and only
increments it. After a second successful pass urbs_initialized can
exceed MAX_BULK_BUFS, so the subsequent rtl2832_sdr_free_urbs() walks
from urbs_initialized - 1 down to 0 and reads past the end of
dev->urb_list[], passing garbage pointers to usb_free_urb().
Mirror the teardown that stop_streaming() already performs: on the error
path call rtl2832_sdr_free_urbs() and rtl2832_sdr_free_stream_bufs()
before unlocking. Both helpers are idempotent (free_urbs kills and zeros
urbs_initialized; free_stream_bufs is gated on URB_BUF and clears the
buf_num counter), so partial-failure paths and the no-allocation paths
remain safe.
Issue identified by automated review of the INV-003 series at
https://sashiko.dev/ |
| Nozomi Networks Labs identified a CWE-400: Uncontrolled Resource Consumption vulnerability in the OPC UA gateway component of Advantech EKI-1242EIMS in firmware version V1.06.01 that allows an adjacent unauthenticated attacker to exhaust the server session pool and cause a complete denial of service to all legitimate OPC UA clients by opening multiple anonymous sessions. |
| A remote attacker could cause excessive resource consumption by supplying specially crafted request parameters, potentially resulting in a denial of service condition.
Older unsupported versions may also be affected.
Users are recommended to upgrade to versions 2.3.12, 2.3-next-M9, 3.0.4, 4.0.4, or 4.1.4, which fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
samples/damon/wsse: handle damon_start() failure
Patch series "samples/damon: handle damon_{start,stop}() failures".
All DAMON sample modules are not correctly handling failures from
damon_start(). Among those, mtier also has an additional problem for
handling of damon_stop() failures. wsse and prcl also have a problem in
their damon_call() failure handling. As a result, memory leaks, next
DAMON operation disruptions, and use-after-free can happen. Fix those.
Note that only the damon_start() failure caused issues can reliably be
reproduced. Reproducing those issues require the admin permission,
though.
This patch (of 6):
damon_sample_wsse_start() callers assume it will clean up resources when
it fails. And the function does the cleanup for context buildup failures.
However, it is not doing the cleanup for damon_start() failure. As a
result, when damon_start() fails, it leaks the memory for DAMON context.
Free the context in case of the failure to fix the issues.
Note that the issue can reliably be reproduced because the module calls
damon_start() in the exclusive mode. For example,
$ sudo damo start
$ echo $$ | sudo tee /sys/module/damon_sample_wsse/parameters/target_pid
$ echo Y | sudo tee /sys/module/damon_sample_wsse/parameters/enabled
$ sudo cat /proc/allocinfo | grep damon_new_ctx
Because the first command is running another DAMON instance, the third
command fails the damon_start() call because the new DAMON instance cannot
exclusively run. And without this fix, by repeating the third and the
fourth commands above, we can show the memory consumption is only
increasing due to the leaks. It requires the sudo permission though.
The issue was discovered [1] by Sashiko. |
| Nodemailer before 9.1.0 contains a quadratic time complexity vulnerability in the addressparser component that allows remote attackers to cause denial of service by supplying a crafted comma-separated address list. Attackers can send a single email with a large number of addresses to block the Node.js event loop for extended periods, consuming 100% CPU and freezing the process. |
| OpenTelemetry-Go is the Go implementation of OpenTelemetry. Prior to version 0.21.0, the go.opentelemetry.io/otel/sdk/log BatchingProcessor can enter a tight CPU loop when attacker-driven log emission fills its asynchronous export buffer while the exporter is backpressured. NewBatchingProcessor wraps the exporter with newBufferExporter(exporter, 1), and the poll loop calls queue.TryDequeue and bufferExporter.EnqueueExport before immediately signaling pollTrigger whenever the queue remains at or above batchSize. Because a failed nonblocking EnqueueExport leaves the queue length unchanged, the processor repeatedly retries without waiting for its ticker, exhausting CPU and degrading or denying service in the embedding process. This issue is fixed in version 0.21.0. |
| roxmltree through 0.21.1 performs quadratic-time attribute and namespace validation during XML parsing without limits on attribute count. Attackers can craft XML documents with tens of thousands of attributes on a single element to consume excessive CPU time and cause denial of service. |
| OpenTelemetry-Go is the Go implementation of OpenTelemetry. From version 1.10.0 until 1.33.0, the sdk/trace/span.go attribute truncation path can fail to enforce AttributeValueLengthLimit for string and string-slice attributes containing the valid Unicode replacement character U+FFFD. safeTruncateValidUTF8 treats the valid replacement rune as invalid UTF-8 and returns the original input, while strings.ToValidUTF8 leaves that valid rune unchanged, so a second safeTruncate attempt can also return the oversized value. An attacker who controls span attribute content can retain values longer than the configured limit, increasing per-span memory use and weakening denial-of-service protection in the instrumented process. This issue is fixed in version 1.33.0. |
| Soup Sieve is a CSS selector library designed to be used with Beautiful Soup 4. Prior to 2.9, the selector parser in src/soupsieve/css_parser.py defines IDENTIFIER with adjacent quantified groups over overlapping character classes, and VALUE embeds IDENTIFIER for attribute selectors. When an attacker-controlled selector contains a long identifier or unquoted attribute-value run followed by input that makes the overall match fail, the regular expression engine explores quadratically many splits between the overlapping groups. User-controlled selectors can reach this path through soupsieve.compile(), soupsieve.select(), or BeautifulSoup.select(), while applications using only hard-coded selectors are unaffected. The resulting CPU consumption can hold the Python GIL, exhaust application workers, and stall a service; successful plain identifier matches are linear, and the issue does not cause memory corruption or code execution. The issue is fixed in version 2.9. |
| libp2p is a JavaScript implementation of the libp2p networking stack. Prior to 11.0.26, @libp2p/floodsub accepts unauthenticated RPC frames on /floodsub/1.0.0 through PeerStreams.attachInboundStream in packages/floodsub/src/peer-streams.ts without protobuf element limits, then processRpc and processRpcSubOpt in packages/floodsub/src/floodsub.ts synchronously process the subscriptions array without a per-frame cap. A single bounded-size frame can decode into millions of empty subscription entries that block the event loop, while hundreds of thousands of unique-topic SUBSCRIBE entries allocate PeerSet objects in this.topics that are not removed after peer removal or stop. Empty entries cause CPU exhaustion but do not grow this.topics; persistent memory growth requires unique topics. The subscription path bypasses message signature validation and the message-only processing queue, allowing a remote peer to cause sustained CPU denial of service, memory exhaustion, out-of-memory termination, and node unavailability. The issue is fixed in version 11.0.26. |
