| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
seccomp: passthrough uretprobe systemcall without filtering
When attaching uretprobes to processes running inside docker, the attached
process is segfaulted when encountering the retprobe.
The reason is that now that uretprobe is a system call the default seccomp
filters in docker block it as they only allow a specific set of known
syscalls. This is true for other userspace applications which use seccomp
to control their syscall surface.
Since uretprobe is a "kernel implementation detail" system call which is
not used by userspace application code directly, it is impractical and
there's very little point in forcing all userspace applications to
explicitly allow it in order to avoid crashing tracked processes.
Pass this systemcall through seccomp without depending on configuration.
Note: uretprobe is currently only x86_64 and isn't expected to ever be
supported in i386.
[kees: minimized changes for easier backporting, tweaked commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc4-mtrace: prevent underflow in sof_ipc4_priority_mask_dfs_write()
The "id" comes from the user. Change the type to unsigned to prevent
an array underflow. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: Fix deinitializing VF in error path
If ice_ena_vfs() fails after calling ice_create_vf_entries(), it frees
all VFs without removing them from snapshot PF-VF mailbox list, leading
to list corruption.
Reproducer:
devlink dev eswitch set $PF1_PCI mode switchdev
ip l s $PF1 up
ip l s $PF1 promisc on
sleep 1
echo 1 > /sys/class/net/$PF1/device/sriov_numvfs
sleep 1
echo 1 > /sys/class/net/$PF1/device/sriov_numvfs
Trace (minimized):
list_add corruption. next->prev should be prev (ffff8882e241c6f0), but was 0000000000000000. (next=ffff888455da1330).
kernel BUG at lib/list_debug.c:29!
RIP: 0010:__list_add_valid_or_report+0xa6/0x100
ice_mbx_init_vf_info+0xa7/0x180 [ice]
ice_initialize_vf_entry+0x1fa/0x250 [ice]
ice_sriov_configure+0x8d7/0x1520 [ice]
? __percpu_ref_switch_mode+0x1b1/0x5d0
? __pfx_ice_sriov_configure+0x10/0x10 [ice]
Sometimes a KASAN report can be seen instead with a similar stack trace:
BUG: KASAN: use-after-free in __list_add_valid_or_report+0xf1/0x100
VFs are added to this list in ice_mbx_init_vf_info(), but only removed
in ice_free_vfs(). Move the removing to ice_free_vf_entries(), which is
also being called in other places where VFs are being removed (including
ice_free_vfs() itself). |
| Scontain SCONE 5.8.0 has an interface vulnerability that leads to state corruption via injected signals. |
| No proper validation of the length of user input in http_server_get_content_type_from_extension. |
| HCL Connections is vulnerable to an information disclosure vulnerability that could allow a user to obtain sensitive information they are not entitled to, which is caused by improper handling of request data. |
| Chatwoot is a customer engagement suite. Prior to 3.16.0, conversation and contact filters endpoints did not sanitize the input of query_operator passed from the frontend or the API. This provided any actor who is authenticated, an attack vector to run arbitrary SQL within the filter query by adding a tautological WHERE clause. This issue is patched with v3.16.0. |
| Windows Kernel Local Elevation of Privilege Vulnerability |
| Cross-site Scripting (XSS) - Stored in mindsdb/mindsdb |
| An elevation of privilege vulnerability exists in the way that the Windows Kernel handles objects in memory, aka 'Windows Kernel Elevation of Privilege Vulnerability'. This CVE ID is unique from CVE-2020-0913, CVE-2020-1000, CVE-2020-1003. |
| A remote code execution vulnerability exists in Windows Domain Name System servers when they fail to properly handle requests, aka 'Windows DNS Server Remote Code Execution Vulnerability'. |
| Path Equivalence: 'file.Name' (Internal Dot) leading to Remote Code Execution and/or Information disclosure and/or malicious content added to uploaded files via write enabled Default Servlet in Apache Tomcat.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.2, from 10.1.0-M1 through 10.1.34, from 9.0.0.M1 through 9.0.98.
The following versions were EOL at the time the CVE was created but are
known to be affected: 8.5.0 though 8.5.100. Other, older, EOL versions
may also be affected.
If all of the following were true, a malicious user was able to view security sensitive files and/or inject content into those files:
- writes enabled for the default servlet (disabled by default)
- support for partial PUT (enabled by default)
- a target URL for security sensitive uploads that was a sub-directory of a target URL for public uploads
- attacker knowledge of the names of security sensitive files being uploaded
- the security sensitive files also being uploaded via partial PUT
If all of the following were true, a malicious user was able to perform remote code execution:
- writes enabled for the default servlet (disabled by default)
- support for partial PUT (enabled by default)
- application was using Tomcat's file based session persistence with the default storage location
- application included a library that may be leveraged in a deserialization attack
Users are recommended to upgrade to version 11.0.3, 10.1.35 or 9.0.99, which fixes the issue. |
| Vulnerability in the MySQL Server product of Oracle MySQL (component: InnoDB). Supported versions that are affected are 8.0.0-8.0.43, 8.4.0-8.4.6 and 9.0.0-9.4.0. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server. CVSS 3.1 Base Score 4.9 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H). |
| Windows Task Scheduler Elevation of Privilege Vulnerability |
| Windows Error Reporting Service Elevation of Privilege Vulnerability |
| Windows Search Remote Code Execution Vulnerability |
| A vulnerability in the remote access VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to conduct a brute force attack in an attempt to identify valid username and password combinations or an authenticated, remote attacker to establish a clientless SSL VPN session with an unauthorized user.
This vulnerability is due to improper separation of authentication, authorization, and accounting (AAA) between the remote access VPN feature and the HTTPS management and site-to-site VPN features. An attacker could exploit this vulnerability by specifying a default connection profile/tunnel group while conducting a brute force attack or while establishing a clientless SSL VPN session using valid credentials. A successful exploit could allow the attacker to achieve one or both of the following:
Identify valid credentials that could then be used to establish an unauthorized remote access VPN session.
Establish a clientless SSL VPN session (only when running Cisco ASA Software Release 9.16 or earlier).
Notes:
Establishing a client-based remote access VPN tunnel is not possible as these default connection profiles/tunnel groups do not and cannot have an IP address pool configured.
This vulnerability does not allow an attacker to bypass authentication. To successfully establish a remote access VPN session, valid credentials are required, including a valid second factor if multi-factor authentication (MFA) is configured.
Cisco will release software updates that address this vulnerability. There are workarounds that address this vulnerability. |
| A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated user in possession of Administrator credentials to execute arbitrary commands as root on the underlying operating system of an affected device.
This vulnerability is due to insufficient validation of arguments that are passed to specific configuration CLI commands. An attacker could exploit this vulnerability by including crafted input as the argument of an affected configuration CLI command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with the privileges of root.
Note: To successfully exploit this vulnerability on a Cisco NX-OS device, an attacker must have Administrator credentials. The following Cisco devices already allow administrative users to access the underlying operating system through the bash-shell feature, so, for these devices, this vulnerability does not grant any additional privileges:
Nexus 3000 Series Switches
Nexus 7000 Series Switches that are running Cisco NX-OS Software releases 8.1(1) and later
Nexus 9000 Series Switches in standalone NX-OS mode |
| Memory corruption while submitting a large list of sync points in an AUX command to the IOCTL_KGSL_GPU_AUX_COMMAND. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: convert workqueues to unbound
When a workqueue is created with `WQ_UNBOUND`, its work items are
served by special worker-pools, whose host workers are not bound to
any specific CPU. In the default configuration (i.e. when
`queue_delayed_work` and friends do not specify which CPU to run the
work item on), `WQ_UNBOUND` allows the work item to be executed on any
CPU in the same node of the CPU it was enqueued on. While this
solution potentially sacrifices locality, it avoids contention with
other processes that might dominate the CPU time of the processor the
work item was scheduled on.
This is not just a theoretical problem: in a particular scenario
misconfigured process was hogging most of the time from CPU0, leaving
less than 0.5% of its CPU time to the kworker. The IDPF workqueues
that were using the kworker on CPU0 suffered large completion delays
as a result, causing performance degradation, timeouts and eventual
system crash.
* I have also run a manual test to gauge the performance
improvement. The test consists of an antagonist process
(`./stress --cpu 2`) consuming as much of CPU 0 as possible. This
process is run under `taskset 01` to bind it to CPU0, and its
priority is changed with `chrt -pQ 9900 10000 ${pid}` and
`renice -n -20 ${pid}` after start.
Then, the IDPF driver is forced to prefer CPU0 by editing all calls
to `queue_delayed_work`, `mod_delayed_work`, etc... to use CPU 0.
Finally, `ktraces` for the workqueue events are collected.
Without the current patch, the antagonist process can force
arbitrary delays between `workqueue_queue_work` and
`workqueue_execute_start`, that in my tests were as high as
`30ms`. With the current patch applied, the workqueue can be
migrated to another unloaded CPU in the same node, and, keeping
everything else equal, the maximum delay I could see was `6us`. |
