| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: hyperv_fb: Fix hang in kdump kernel when on Hyper-V Gen 2 VMs
Gen 2 Hyper-V VMs boot via EFI and have a standard EFI framebuffer
device. When the kdump kernel runs in such a VM, loading the efifb
driver may hang because of accessing the framebuffer at the wrong
memory address.
The scenario occurs when the hyperv_fb driver in the original kernel
moves the framebuffer to a different MMIO address because of conflicts
with an already-running efifb or simplefb driver. The hyperv_fb driver
then informs Hyper-V of the change, which is allowed by the Hyper-V FB
VMBus device protocol. However, when the kexec command loads the kdump
kernel into crash memory via the kexec_file_load() system call, the
system call doesn't know the framebuffer has moved, and it sets up the
kdump screen_info using the original framebuffer address. The transition
to the kdump kernel does not go through the Hyper-V host, so Hyper-V
does not reset the framebuffer address like it would do on a reboot.
When efifb tries to run, it accesses a non-existent framebuffer
address, which traps to the Hyper-V host. After many such accesses,
the Hyper-V host thinks the guest is being malicious, and throttles
the guest to the point that it runs very slowly or appears to have hung.
When the kdump kernel is loaded into crash memory via the kexec_load()
system call, the problem does not occur. In this case, the kexec command
builds the screen_info table itself in user space from data returned
by the FBIOGET_FSCREENINFO ioctl against /dev/fb0, which gives it the
new framebuffer location.
This problem was originally reported in 2020 [1], resulting in commit
3cb73bc3fa2a ("hyperv_fb: Update screen_info after removing old
framebuffer"). This commit solved the problem by setting orig_video_isVGA
to 0, so the kdump kernel was unaware of the EFI framebuffer. The efifb
driver did not try to load, and no hang occurred. But in 2024, commit
c25a19afb81c ("fbdev/hyperv_fb: Do not clear global screen_info")
effectively reverted 3cb73bc3fa2a. Commit c25a19afb81c has no reference
to 3cb73bc3fa2a, so perhaps it was done without knowing the implications
that were reported with 3cb73bc3fa2a. In any case, as of commit
c25a19afb81c, the original problem came back again.
Interestingly, the hyperv_drm driver does not have this problem because
it never moves the framebuffer. The difference is that the hyperv_drm
driver removes any conflicting framebuffers *before* allocating an MMIO
address, while the hyperv_fb drivers removes conflicting framebuffers
*after* allocating an MMIO address. With the "after" ordering, hyperv_fb
may encounter a conflict and move the framebuffer to a different MMIO
address. But the conflict is essentially bogus because it is removed
a few lines of code later.
Rather than fix the problem with the approach from 2020 in commit
3cb73bc3fa2a, instead slightly reorder the steps in hyperv_fb so
conflicting framebuffers are removed before allocating an MMIO address.
Then the default framebuffer MMIO address should always be available, and
there's never any confusion about which framebuffer address the kdump
kernel should use -- it's always the original address provided by
the Hyper-V host. This approach is already used by the hyperv_drm
driver, and is consistent with the usage guidelines at the head of
the module with the function aperture_remove_conflicting_devices().
This approach also solves a related minor problem when kexec_load()
is used to load the kdump kernel. With current code, unbinding and
rebinding the hyperv_fb driver could result in the framebuffer moving
back to the default framebuffer address, because on the rebind there
are no conflicts. If such a move is done after the kdump kernel is
loaded with the new framebuffer address, at kdump time it could again
have the wrong address.
This problem and fix are described in terms of the kdump kernel, but
it can also occur
---truncated--- |
| An issue in wps office before v.19302 allows a local attacker to obtain sensitive information via a crafted file. |
| Unsafe default file type filter policy in HCL Domino Volt allows upload of .html file and execution of unsafe JavaScript in deployed applications. |
| A server-side request forgery vulnerability in the SAML component of Ivanti Connect Secure (9.x, 22.x) and Ivanti Policy Secure (9.x, 22.x) and Ivanti Neurons for ZTA allows an attacker to access certain restricted resources without authentication. |
| Unsafe default file type filter policy in HCL Domino Volt allows upload of .html file and execution of unsafe JavaScript in deployed applications |
| Improper sanitization of SVG files in HCL Domino Volt allows client-side script injection in deployed applications. |
| Missing "no cache" headers in HCL Leap permits sensitive data to be cached. |
| Insufficient URI protocol whitelist in HCL Domino Volt and Domino Leap
allow script injection through query parameters. |
| VMware Workspace ONE Access, Identity Manager and vRealize Automation contain a privilege escalation vulnerability due to improper permissions in support scripts. A malicious actor with local access can escalate privileges to 'root'. |
| Microsoft Defender Remote Code Execution Vulnerability |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: fix extent range end unlock in cow_file_range()
Running generic/751 on the for-next branch often results in a hang like
below. They are both stack by locking an extent. This suggests someone
forget to unlock an extent.
INFO: task kworker/u128:1:12 blocked for more than 323 seconds.
Not tainted 6.13.0-BTRFS-ZNS+ #503
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u128:1 state:D stack:0 pid:12 tgid:12 ppid:2 flags:0x00004000
Workqueue: btrfs-fixup btrfs_work_helper [btrfs]
Call Trace:
<TASK>
__schedule+0x534/0xdd0
schedule+0x39/0x140
__lock_extent+0x31b/0x380 [btrfs]
? __pfx_autoremove_wake_function+0x10/0x10
btrfs_writepage_fixup_worker+0xf1/0x3a0 [btrfs]
btrfs_work_helper+0xff/0x480 [btrfs]
? lock_release+0x178/0x2c0
process_one_work+0x1ee/0x570
? srso_return_thunk+0x5/0x5f
worker_thread+0x1d1/0x3b0
? __pfx_worker_thread+0x10/0x10
kthread+0x10b/0x230
? __pfx_kthread+0x10/0x10
ret_from_fork+0x30/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
INFO: task kworker/u134:0:184 blocked for more than 323 seconds.
Not tainted 6.13.0-BTRFS-ZNS+ #503
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u134:0 state:D stack:0 pid:184 tgid:184 ppid:2 flags:0x00004000
Workqueue: writeback wb_workfn (flush-btrfs-4)
Call Trace:
<TASK>
__schedule+0x534/0xdd0
schedule+0x39/0x140
__lock_extent+0x31b/0x380 [btrfs]
? __pfx_autoremove_wake_function+0x10/0x10
find_lock_delalloc_range+0xdb/0x260 [btrfs]
writepage_delalloc+0x12f/0x500 [btrfs]
? srso_return_thunk+0x5/0x5f
extent_write_cache_pages+0x232/0x840 [btrfs]
btrfs_writepages+0x72/0x130 [btrfs]
do_writepages+0xe7/0x260
? srso_return_thunk+0x5/0x5f
? lock_acquire+0xd2/0x300
? srso_return_thunk+0x5/0x5f
? find_held_lock+0x2b/0x80
? wbc_attach_and_unlock_inode.part.0+0x102/0x250
? wbc_attach_and_unlock_inode.part.0+0x102/0x250
__writeback_single_inode+0x5c/0x4b0
writeback_sb_inodes+0x22d/0x550
__writeback_inodes_wb+0x4c/0xe0
wb_writeback+0x2f6/0x3f0
wb_workfn+0x32a/0x510
process_one_work+0x1ee/0x570
? srso_return_thunk+0x5/0x5f
worker_thread+0x1d1/0x3b0
? __pfx_worker_thread+0x10/0x10
kthread+0x10b/0x230
? __pfx_kthread+0x10/0x10
ret_from_fork+0x30/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
This happens because we have another success path for the zoned mode. When
there is no active zone available, btrfs_reserve_extent() returns
-EAGAIN. In this case, we have two reactions.
(1) If the given range is never allocated, we can only wait for someone
to finish a zone, so wait on BTRFS_FS_NEED_ZONE_FINISH bit and retry
afterward.
(2) Or, if some allocations are already done, we must bail out and let
the caller to send IOs for the allocation. This is because these IOs
may be necessary to finish a zone.
The commit 06f364284794 ("btrfs: do proper folio cleanup when
cow_file_range() failed") moved the unlock code from the inside of the
loop to the outside. So, previously, the allocated extents are unlocked
just after the allocation and so before returning from the function.
However, they are no longer unlocked on the case (2) above. That caused
the hang issue.
Fix the issue by modifying the 'end' to the end of the allocated
range. Then, we can exit the loop and the same unlock code can properly
handle the case. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: corsair-void: Update power supply values with a unified work handler
corsair_void_process_receiver can be called from an interrupt context,
locking battery_mutex in it was causing a kernel panic.
Fix it by moving the critical section into its own work, sharing this
work with battery_add_work and battery_remove_work to remove the need
for any locking |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: init return value in amdgpu_ttm_clear_buffer
Otherwise an uninitialized value can be returned if
amdgpu_res_cleared returns true for all regions.
Possibly closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3812
(cherry picked from commit 7c62aacc3b452f73a1284198c81551035fac6d71) |
| Windows Runtime Remote Code Execution Vulnerability |
| Active Directory Domain Services Elevation of Privilege Vulnerability |
| Open Management Infrastructure Elevation of Privilege Vulnerability |
| Win32k Elevation of Privilege Vulnerability |
| Win32k Elevation of Privilege Vulnerability |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slab/kvfree_rcu: Switch to WQ_MEM_RECLAIM wq
Currently kvfree_rcu() APIs use a system workqueue which is
"system_unbound_wq" to driver RCU machinery to reclaim a memory.
Recently, it has been noted that the following kernel warning can
be observed:
<snip>
workqueue: WQ_MEM_RECLAIM nvme-wq:nvme_scan_work is flushing !WQ_MEM_RECLAIM events_unbound:kfree_rcu_work
WARNING: CPU: 21 PID: 330 at kernel/workqueue.c:3719 check_flush_dependency+0x112/0x120
Modules linked in: intel_uncore_frequency(E) intel_uncore_frequency_common(E) skx_edac(E) ...
CPU: 21 UID: 0 PID: 330 Comm: kworker/u144:6 Tainted: G E 6.13.2-0_g925d379822da #1
Hardware name: Wiwynn Twin Lakes MP/Twin Lakes Passive MP, BIOS YMM20 02/01/2023
Workqueue: nvme-wq nvme_scan_work
RIP: 0010:check_flush_dependency+0x112/0x120
Code: 05 9a 40 14 02 01 48 81 c6 c0 00 00 00 48 8b 50 18 48 81 c7 c0 00 00 00 48 89 f9 48 ...
RSP: 0018:ffffc90000df7bd8 EFLAGS: 00010082
RAX: 000000000000006a RBX: ffffffff81622390 RCX: 0000000000000027
RDX: 00000000fffeffff RSI: 000000000057ffa8 RDI: ffff88907f960c88
RBP: 0000000000000000 R08: ffffffff83068e50 R09: 000000000002fffd
R10: 0000000000000004 R11: 0000000000000000 R12: ffff8881001a4400
R13: 0000000000000000 R14: ffff88907f420fb8 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88907f940000(0000) knlGS:0000000000000000
CR2: 00007f60c3001000 CR3: 000000107d010005 CR4: 00000000007726f0
PKRU: 55555554
Call Trace:
<TASK>
? __warn+0xa4/0x140
? check_flush_dependency+0x112/0x120
? report_bug+0xe1/0x140
? check_flush_dependency+0x112/0x120
? handle_bug+0x5e/0x90
? exc_invalid_op+0x16/0x40
? asm_exc_invalid_op+0x16/0x20
? timer_recalc_next_expiry+0x190/0x190
? check_flush_dependency+0x112/0x120
? check_flush_dependency+0x112/0x120
__flush_work.llvm.1643880146586177030+0x174/0x2c0
flush_rcu_work+0x28/0x30
kvfree_rcu_barrier+0x12f/0x160
kmem_cache_destroy+0x18/0x120
bioset_exit+0x10c/0x150
disk_release.llvm.6740012984264378178+0x61/0xd0
device_release+0x4f/0x90
kobject_put+0x95/0x180
nvme_put_ns+0x23/0xc0
nvme_remove_invalid_namespaces+0xb3/0xd0
nvme_scan_work+0x342/0x490
process_scheduled_works+0x1a2/0x370
worker_thread+0x2ff/0x390
? pwq_release_workfn+0x1e0/0x1e0
kthread+0xb1/0xe0
? __kthread_parkme+0x70/0x70
ret_from_fork+0x30/0x40
? __kthread_parkme+0x70/0x70
ret_from_fork_asm+0x11/0x20
</TASK>
---[ end trace 0000000000000000 ]---
<snip>
To address this switch to use of independent WQ_MEM_RECLAIM
workqueue, so the rules are not violated from workqueue framework
point of view.
Apart of that, since kvfree_rcu() does reclaim memory it is worth
to go with WQ_MEM_RECLAIM type of wq because it is designed for
this purpose. |
| Windows LSA Spoofing Vulnerability |
