| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A stack-based buffer overflow vulnerability was discovered in Tenda AC18 v15.03.05.05_multi. The vulnerability exists in the guestSsid parameter of the /goform/WifiGuestSet interface. Remote attackers can exploit this vulnerability by sending oversized data to the guestSsid parameter, leading to denial of service (device crash) or potential remote code execution. |
| Cross-Site Request Forgery (CSRF) in SourceCodester Product Expiry Management System. The User Management module (delete-user.php) allows remote attackers to delete arbitrary user accounts via forged cross-origin GET requests because the endpoint relies solely on session cookies and lacks CSRF protection. |
| Tenda AX-1803 v1.0.0.1 was discovered to contain a stack overflow via the wanMTU parameter in the sub_4F55C function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request. |
| Tenda AX-1803 v1.0.0.1 was discovered to contain a stack overflow via the time parameter in the SetSysTimeCfg function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request. |
| Tenda AX3 V16.03.12.10_CN was discovered to contain a stack overflow in the deviceId parameter of the saveParentControlInfo function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request. |
| A vulnerability was found in ChestnutCMS up to 15.1. It has been declared as critical. This vulnerability affects unknown code of the file /dev-api/groovy/exec of the component API Endpoint. The manipulation leads to deserialization. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc64/ftrace: fix clobbered r15 during livepatching
While r15 is clobbered always with PPC_FTRACE_OUT_OF_LINE, it is
not restored in livepatch sequence leading to not so obvious fails
like below:
BUG: Unable to handle kernel data access on write at 0xc0000000000f9078
Faulting instruction address: 0xc0000000018ff958
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP: c0000000018ff958 LR: c0000000018ff930 CTR: c0000000009c0790
REGS: c00000005f2e7790 TRAP: 0300 Tainted: G K (6.14.0+)
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 2822880b XER: 20040000
CFAR: c0000000008addc0 DAR: c0000000000f9078 DSISR: 0a000000 IRQMASK: 1
GPR00: c0000000018f2584 c00000005f2e7a30 c00000000280a900 c000000017ffa488
GPR04: 0000000000000008 0000000000000000 c0000000018f24fc 000000000000000d
GPR08: fffffffffffe0000 000000000000000d 0000000000000000 0000000000008000
GPR12: c0000000009c0790 c000000017ffa480 c00000005f2e7c78 c0000000000f9070
GPR16: c00000005f2e7c90 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 c00000005f3efa80 c00000005f2e7c60 c00000005f2e7c88
GPR24: c00000005f2e7c60 0000000000000001 c0000000000f9078 0000000000000000
GPR28: 00007fff97960000 c000000017ffa480 0000000000000000 c0000000000f9078
...
Call Trace:
check_heap_object+0x34/0x390 (unreliable)
__mutex_unlock_slowpath.isra.0+0xe4/0x230
seq_read_iter+0x430/0xa90
proc_reg_read_iter+0xa4/0x200
vfs_read+0x41c/0x510
ksys_read+0xa4/0x190
system_call_exception+0x1d0/0x440
system_call_vectored_common+0x15c/0x2ec
Fix it by restoring r15 always. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: arfs: fix use-after-free when freeing @rx_cpu_rmap
The CI testing bots triggered the following splat:
[ 718.203054] BUG: KASAN: use-after-free in free_irq_cpu_rmap+0x53/0x80
[ 718.206349] Read of size 4 at addr ffff8881bd127e00 by task sh/20834
[ 718.212852] CPU: 28 PID: 20834 Comm: sh Kdump: loaded Tainted: G S W IOE 5.17.0-rc8_nextqueue-devqueue-02643-g23f3121aca93 #1
[ 718.219695] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0012.070720200218 07/07/2020
[ 718.223418] Call Trace:
[ 718.227139]
[ 718.230783] dump_stack_lvl+0x33/0x42
[ 718.234431] print_address_description.constprop.9+0x21/0x170
[ 718.238177] ? free_irq_cpu_rmap+0x53/0x80
[ 718.241885] ? free_irq_cpu_rmap+0x53/0x80
[ 718.245539] kasan_report.cold.18+0x7f/0x11b
[ 718.249197] ? free_irq_cpu_rmap+0x53/0x80
[ 718.252852] free_irq_cpu_rmap+0x53/0x80
[ 718.256471] ice_free_cpu_rx_rmap.part.11+0x37/0x50 [ice]
[ 718.260174] ice_remove_arfs+0x5f/0x70 [ice]
[ 718.263810] ice_rebuild_arfs+0x3b/0x70 [ice]
[ 718.267419] ice_rebuild+0x39c/0xb60 [ice]
[ 718.270974] ? asm_sysvec_apic_timer_interrupt+0x12/0x20
[ 718.274472] ? ice_init_phy_user_cfg+0x360/0x360 [ice]
[ 718.278033] ? delay_tsc+0x4a/0xb0
[ 718.281513] ? preempt_count_sub+0x14/0xc0
[ 718.284984] ? delay_tsc+0x8f/0xb0
[ 718.288463] ice_do_reset+0x92/0xf0 [ice]
[ 718.292014] ice_pci_err_resume+0x91/0xf0 [ice]
[ 718.295561] pci_reset_function+0x53/0x80
<...>
[ 718.393035] Allocated by task 690:
[ 718.433497] Freed by task 20834:
[ 718.495688] Last potentially related work creation:
[ 718.568966] The buggy address belongs to the object at ffff8881bd127e00
which belongs to the cache kmalloc-96 of size 96
[ 718.574085] The buggy address is located 0 bytes inside of
96-byte region [ffff8881bd127e00, ffff8881bd127e60)
[ 718.579265] The buggy address belongs to the page:
[ 718.598905] Memory state around the buggy address:
[ 718.601809] ffff8881bd127d00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[ 718.604796] ffff8881bd127d80: 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc
[ 718.607794] >ffff8881bd127e00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[ 718.610811] ^
[ 718.613819] ffff8881bd127e80: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
[ 718.617107] ffff8881bd127f00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
This is due to that free_irq_cpu_rmap() is always being called
*after* (devm_)free_irq() and thus it tries to work with IRQ descs
already freed. For example, on device reset the driver frees the
rmap right before allocating a new one (the splat above).
Make rmap creation and freeing function symmetrical with
{request,free}_irq() calls i.e. do that on ifup/ifdown instead
of device probe/remove/resume. These operations can be performed
independently from the actual device aRFS configuration.
Also, make sure ice_vsi_free_irq() clears IRQ affinity notifiers
only when aRFS is disabled -- otherwise, CPU rmap sets and clears
its own and they must not be touched manually. |
| Tenda AC15 v15.03.05.18_multi) issues an authentication cookie that exposes the account password hash to the client and uses a short, low-entropy suffix as the session identifier. An attacker with network access or the ability to run JS in a victim browser can steal the cookie and replay it to access protected resources. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Fix buffer overflow in debugfs
If the user tries to write more than 32 bytes then it results in memory
corruption. Fortunately, this is debugfs so it's limited to root users. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: fbnic: avoid double free when failing to DMA-map FW msg
The semantics are that caller of fbnic_mbx_map_msg() retains
the ownership of the message on error. All existing callers
dutifully free the page. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/hyper-v: Skip non-canonical addresses during PV TLB flush
In KVM guests with Hyper-V hypercalls enabled, the hypercalls
HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST and HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST_EX
allow a guest to request invalidation of portions of a virtual TLB.
For this, the hypercall parameter includes a list of GVAs that are supposed
to be invalidated.
However, when non-canonical GVAs are passed, there is currently no
filtering in place and they are eventually passed to checked invocations of
INVVPID on Intel / INVLPGA on AMD. While AMD's INVLPGA silently ignores
non-canonical addresses (effectively a no-op), Intel's INVVPID explicitly
signals VM-Fail and ultimately triggers the WARN_ONCE in invvpid_error():
invvpid failed: ext=0x0 vpid=1 gva=0xaaaaaaaaaaaaa000
WARNING: CPU: 6 PID: 326 at arch/x86/kvm/vmx/vmx.c:482
invvpid_error+0x91/0xa0 [kvm_intel]
Modules linked in: kvm_intel kvm 9pnet_virtio irqbypass fuse
CPU: 6 UID: 0 PID: 326 Comm: kvm-vm Not tainted 6.15.0 #14 PREEMPT(voluntary)
RIP: 0010:invvpid_error+0x91/0xa0 [kvm_intel]
Call Trace:
vmx_flush_tlb_gva+0x320/0x490 [kvm_intel]
kvm_hv_vcpu_flush_tlb+0x24f/0x4f0 [kvm]
kvm_arch_vcpu_ioctl_run+0x3013/0x5810 [kvm]
Hyper-V documents that invalid GVAs (those that are beyond a partition's
GVA space) are to be ignored. While not completely clear whether this
ruling also applies to non-canonical GVAs, it is likely fine to make that
assumption, and manual testing on Azure confirms "real" Hyper-V interprets
the specification in the same way.
Skip non-canonical GVAs when processing the list of address to avoid
tripping the INVVPID failure. Alternatively, KVM could filter out "bad"
GVAs before inserting into the FIFO, but practically speaking the only
downside of pushing validation to the final processing is that doing so
is suboptimal for the guest, and no well-behaved guest will request TLB
flushes for non-canonical addresses. |
| In the Linux kernel, the following vulnerability has been resolved:
posix-cpu-timers: Cleanup CPU timers before freeing them during exec
Commit 55e8c8eb2c7b ("posix-cpu-timers: Store a reference to a pid not a
task") started looking up tasks by PID when deleting a CPU timer.
When a non-leader thread calls execve, it will switch PIDs with the leader
process. Then, as it calls exit_itimers, posix_cpu_timer_del cannot find
the task because the timer still points out to the old PID.
That means that armed timers won't be disarmed, that is, they won't be
removed from the timerqueue_list. exit_itimers will still release their
memory, and when that list is later processed, it leads to a
use-after-free.
Clean up the timers from the de-threaded task before freeing them. This
prevents a reported use-after-free. |
| A vulnerability in the web UI of Cisco Unified CCX could allow an authenticated, remote attacker to perform a directory traversal and access arbitrary resources.
This vulnerability is due to an insufficient input validation associated to specific UI features. An attacker could exploit this vulnerability by sending a crafted request to the web UI. A successful exploit could allow the attacker to gain read access to arbitrary files on the underlying operating system. To exploit this vulnerability, the attacker must have valid administrative credentials. |
| Insecure default permissions in the agent of Ivanti Endpoint Manager before version 2024 SU4 allows a local authenticated attacker to write arbitrary files anywhere on disk |
| Frappe Learning is a learning system that helps users structure their content. Starting in version 2.0.0 and prior to version 2.41.0, users were able to access the submissions made by other students The issue has been fixed in version 2.41.0 by ensuring proper roles and redirecting if accessed via direct URL. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ump: Fix buffer overflow at UMP SysEx message conversion
The conversion function from MIDI 1.0 to UMP packet contains an
internal buffer to keep the incoming MIDI bytes, and its size is 4, as
it was supposed to be the max size for a MIDI1 UMP packet data.
However, the implementation overlooked that SysEx is handled in a
different format, and it can be up to 6 bytes, as found in
do_convert_to_ump(). It leads eventually to a buffer overflow, and
may corrupt the memory when a longer SysEx message is received.
The fix is simply to extend the buffer size to 6 to fit with the SysEx
UMP message. |
| Frappe Learning is a learning system that helps users structure their content. Starting in version 2.0.0 and prior to version 2.41.0, when admins revoked a role from the user, the effect was not immediate because of caching. The issue has been fixed in version 2.41.0 by ensuring the cache is cleared after roles are updated. |
| A vulnerability was detected in code-projects Online Job Search Engine 1.0. This affects an unknown function of the file /login.php. Performing manipulation of the argument username/phone results in sql injection. The attack is possible to be carried out remotely. The exploit is now public and may be used. |
| A vulnerability was detected in code-projects Responsive Hotel Site 1.0. Impacted is an unknown function of the file /admin/usersettingdel.php. Performing manipulation of the argument eid results in sql injection. Remote exploitation of the attack is possible. The exploit is now public and may be used. |
