| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Tenda AC15 v15.03.05.18_multi) issues an authentication cookie that exposes the account password hash to the client and uses a short, low-entropy suffix as the session identifier. An attacker with network access or the ability to run JS in a victim browser can steal the cookie and replay it to access protected resources. |
| Veeam Backup for Microsoft Azure is vulnerable to Server-Side Request Forgery (SSRF). This may allow an unauthenticated attacker to send unauthorized requests from the system, potentially leading to network enumeration or facilitating other attacks. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Fix buffer overflow in debugfs
If the user tries to write more than 32 bytes then it results in memory
corruption. Fortunately, this is debugfs so it's limited to root users. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: fbnic: avoid double free when failing to DMA-map FW msg
The semantics are that caller of fbnic_mbx_map_msg() retains
the ownership of the message on error. All existing callers
dutifully free the page. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/hyper-v: Skip non-canonical addresses during PV TLB flush
In KVM guests with Hyper-V hypercalls enabled, the hypercalls
HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST and HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST_EX
allow a guest to request invalidation of portions of a virtual TLB.
For this, the hypercall parameter includes a list of GVAs that are supposed
to be invalidated.
However, when non-canonical GVAs are passed, there is currently no
filtering in place and they are eventually passed to checked invocations of
INVVPID on Intel / INVLPGA on AMD. While AMD's INVLPGA silently ignores
non-canonical addresses (effectively a no-op), Intel's INVVPID explicitly
signals VM-Fail and ultimately triggers the WARN_ONCE in invvpid_error():
invvpid failed: ext=0x0 vpid=1 gva=0xaaaaaaaaaaaaa000
WARNING: CPU: 6 PID: 326 at arch/x86/kvm/vmx/vmx.c:482
invvpid_error+0x91/0xa0 [kvm_intel]
Modules linked in: kvm_intel kvm 9pnet_virtio irqbypass fuse
CPU: 6 UID: 0 PID: 326 Comm: kvm-vm Not tainted 6.15.0 #14 PREEMPT(voluntary)
RIP: 0010:invvpid_error+0x91/0xa0 [kvm_intel]
Call Trace:
vmx_flush_tlb_gva+0x320/0x490 [kvm_intel]
kvm_hv_vcpu_flush_tlb+0x24f/0x4f0 [kvm]
kvm_arch_vcpu_ioctl_run+0x3013/0x5810 [kvm]
Hyper-V documents that invalid GVAs (those that are beyond a partition's
GVA space) are to be ignored. While not completely clear whether this
ruling also applies to non-canonical GVAs, it is likely fine to make that
assumption, and manual testing on Azure confirms "real" Hyper-V interprets
the specification in the same way.
Skip non-canonical GVAs when processing the list of address to avoid
tripping the INVVPID failure. Alternatively, KVM could filter out "bad"
GVAs before inserting into the FIFO, but practically speaking the only
downside of pushing validation to the final processing is that doing so
is suboptimal for the guest, and no well-behaved guest will request TLB
flushes for non-canonical addresses. |
| In the Linux kernel, the following vulnerability has been resolved:
posix-cpu-timers: Cleanup CPU timers before freeing them during exec
Commit 55e8c8eb2c7b ("posix-cpu-timers: Store a reference to a pid not a
task") started looking up tasks by PID when deleting a CPU timer.
When a non-leader thread calls execve, it will switch PIDs with the leader
process. Then, as it calls exit_itimers, posix_cpu_timer_del cannot find
the task because the timer still points out to the old PID.
That means that armed timers won't be disarmed, that is, they won't be
removed from the timerqueue_list. exit_itimers will still release their
memory, and when that list is later processed, it leads to a
use-after-free.
Clean up the timers from the de-threaded task before freeing them. This
prevents a reported use-after-free. |
| A stack buffer overflow exists in the ToToLink A720R Router firmware V4.1.5cu.614_B20230630 within the sysconf binary (sub_401EE0 function). The binary reads the /proc/stat file using fgets() into a local buffer and subsequently parses the line using sscanf() into a single-byte variable with the %s format specifier. Maliciously crafted /proc/stat content can overwrite adjacent stack memory, potentially allowing an attacker with filesystem write privileges to execute arbitrary code on the device. |
| A stack-based buffer overflow exists in the get_merge_mac function of the httpd binary on Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The function concatenates up to six user-supplied CGI parameters matching <parameter>_0~5 into a fixed-size buffer (a2) without proper bounds checking, appending colon delimiters during concatenation. Remote attackers can exploit this vulnerability via specially crafted HTTP requests to execute arbitrary code or cause denial of service without authentication. |
| A stack-based buffer overflow vulnerability exists in the mtk_dut binary of Linksys E7350 routers (Firmware 1.1.00.032). The function sub_4045A8 reads up to 256 bytes from /sys/class/net/%s/address into a local buffer and then copies it into caller-provided buffer a1 using strcpy without boundary checks. Since a1 is often allocated with significantly smaller sizes (20-32 bytes), local attackers controlling the contents of /sys/class/net/%s/address can trigger buffer overflows, leading to memory corruption, denial of service, or potential arbitrary code execution. |
| A stack-based buffer overflow exists in the validate_static_route function of the httpd binary on Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The function improperly concatenates user-supplied CGI parameters (route_ipaddr_0~3, route_netmask_0~3, route_gateway_0~3) into fixed-size buffers (v6, v10, v14) without proper bounds checking. Remote attackers can exploit this vulnerability via specially crafted HTTP requests to execute arbitrary code or cause denial of service without authentication. |
| A stack-based buffer overflow vulnerability exists in the libshared.so library of Cisco Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The functions get_mac_from_ip and get_ip_from_mac use sscanf with overly permissive "%100s" format specifiers to parse entries from /proc/net/arp into fixed-size buffers (v6: 50 bytes, v7 sub-arrays: 50 bytes). This allows local attackers controlling the contents of /proc/net/arp to overflow stack buffers, leading to memory corruption, denial of service, or potential arbitrary code execution. |
| A stack-based buffer overflow exists in the httpd binary of Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The apply_cgi and block_cgi functions copy user-supplied input from the "url" CGI parameter into stack buffers (v36, v29) using sprintf without bounds checking. Because these buffers are allocated as single-byte variables, any non-empty input will trigger a buffer overflow. Remote attackers can exploit this vulnerability via crafted HTTP requests to execute arbitrary code or cause denial of service without authentication. |
| A vulnerability in the web UI of Cisco Unified CCX could allow an authenticated, remote attacker to perform a directory traversal and access arbitrary resources.
This vulnerability is due to an insufficient input validation associated to specific UI features. An attacker could exploit this vulnerability by sending a crafted request to the web UI. A successful exploit could allow the attacker to gain read access to arbitrary files on the underlying operating system. To exploit this vulnerability, the attacker must have valid administrative credentials. |
| Insecure default permissions in the agent of Ivanti Endpoint Manager before version 2024 SU4 allows a local authenticated attacker to write arbitrary files anywhere on disk |
| Frappe Learning is a learning system that helps users structure their content. Starting in version 2.0.0 and prior to version 2.41.0, users were able to access the submissions made by other students The issue has been fixed in version 2.41.0 by ensuring proper roles and redirecting if accessed via direct URL. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ump: Fix buffer overflow at UMP SysEx message conversion
The conversion function from MIDI 1.0 to UMP packet contains an
internal buffer to keep the incoming MIDI bytes, and its size is 4, as
it was supposed to be the max size for a MIDI1 UMP packet data.
However, the implementation overlooked that SysEx is handled in a
different format, and it can be up to 6 bytes, as found in
do_convert_to_ump(). It leads eventually to a buffer overflow, and
may corrupt the memory when a longer SysEx message is received.
The fix is simply to extend the buffer size to 6 to fit with the SysEx
UMP message. |
| Frappe Learning is a learning system that helps users structure their content. Starting in version 2.0.0 and prior to version 2.41.0, when admins revoked a role from the user, the effect was not immediate because of caching. The issue has been fixed in version 2.41.0 by ensuring the cache is cleared after roles are updated. |
| A vulnerability was detected in code-projects Online Job Search Engine 1.0. This affects an unknown function of the file /login.php. Performing manipulation of the argument username/phone results in sql injection. The attack is possible to be carried out remotely. The exploit is now public and may be used. |
| A vulnerability was detected in code-projects Responsive Hotel Site 1.0. Impacted is an unknown function of the file /admin/usersettingdel.php. Performing manipulation of the argument eid results in sql injection. Remote exploitation of the attack is possible. The exploit is now public and may be used. |
| A flaw has been found in code-projects Responsive Hotel Site 1.0. The affected element is an unknown function of the file /admin/usersetting.php. Executing manipulation of the argument usname can lead to sql injection. The attack can be executed remotely. The exploit has been published and may be used. |
