| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
clk: mmp2: call pm_genpd_init() only after genpd.name is set
Setting the genpd's struct device's name with dev_set_name() is
happening within pm_genpd_init(). If it remains NULL, things can blow up
later, such as when crafting the devfs hierarchy for the power domain:
Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read
...
Call trace:
strlen from start_creating+0x90/0x138
start_creating from debugfs_create_dir+0x20/0x178
debugfs_create_dir from genpd_debug_add.part.0+0x4c/0x144
genpd_debug_add.part.0 from genpd_debug_init+0x74/0x90
genpd_debug_init from do_one_initcall+0x5c/0x244
do_one_initcall from kernel_init_freeable+0x19c/0x1f4
kernel_init_freeable from kernel_init+0x1c/0x12c
kernel_init from ret_from_fork+0x14/0x28
Bisecting tracks this crash back to commit 899f44531fe6 ("pmdomain: core:
Add GENPD_FLAG_DEV_NAME_FW flag"), which exchanges use of genpd->name
with dev_name(&genpd->dev) in genpd_debug_add.part(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dpu: check dpu_plane_atomic_print_state() for valid sspp
Similar to the r_pipe sspp protect, add a check to protect
the pipe state prints to avoid NULL ptr dereference for cases when
the state is dumped without a corresponding atomic_check() where the
pipe->sspp is assigned.
Patchwork: https://patchwork.freedesktop.org/patch/628404/ |
| In the Linux kernel, the following vulnerability has been resolved:
clk: mmp: pxa1908-mpmu: Fix a NULL vs IS_ERR() check
The devm_kzalloc() function returns NULL on error, not error pointers.
Update the check to match. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: mmp: pxa1908-apbcp: Fix a NULL vs IS_ERR() check
The devm_kzalloc() function doesn't return error pointers, it returns
NULL on error. Update the check to match. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: mmp: pxa1908-apbc: Fix NULL vs IS_ERR() check
The devm_kzalloc() function returns NULL on error, not error pointers.
Fix the check. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: tests: Fix potential NULL dereference in test_cfg80211_parse_colocated_ap()
kunit_kzalloc() may return NULL, dereferencing it without NULL check may
lead to NULL dereference.
Add a NULL check for ies. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: avoid NULL pointer dereference
When iterating over the links of a vif, we need to make sure that the
pointer is valid (in other words - that the link exists) before
dereferncing it.
Use for_each_vif_active_link that also does the check. |
| In the Linux kernel, the following vulnerability has been resolved:
media: uvcvideo: Fix deadlock during uvc_probe
If uvc_probe() fails, it can end up calling uvc_status_unregister() before
uvc_status_init() is called.
Fix this by checking if dev->status is NULL or not in
uvc_status_unregister(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: fix off by one in mt7925_load_clc()
This comparison should be >= instead of > to prevent an out of bounds
read and write. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: th1520: Fix memory corruption due to incorrect array size
The functions th1520_mbox_suspend_noirq and th1520_mbox_resume_noirq are
intended to save and restore the interrupt mask registers in the MBOX
ICU0. However, the array used to store these registers was incorrectly
sized, leading to memory corruption when accessing all four registers.
This commit corrects the array size to accommodate all four interrupt
mask registers, preventing memory corruption during suspend and resume
operations. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_alloc: don't call pfn_to_page() on possibly non-existent PFN in split_large_buddy()
In split_large_buddy(), we might call pfn_to_page() on a PFN that might
not exist. In corner cases, such as when freeing the highest pageblock in
the last memory section, this could result with CONFIG_SPARSEMEM &&
!CONFIG_SPARSEMEM_EXTREME in __pfn_to_section() returning NULL and and
__section_mem_map_addr() dereferencing that NULL pointer.
Let's fix it, and avoid doing a pfn_to_page() call for the first
iteration, where we already have the page.
So far this was found by code inspection, but let's just CC stable as the
fix is easy. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: ptrace: fix partial SETREGSET for NT_ARM_FPMR
Currently fpmr_set() doesn't initialize the temporary 'fpmr' variable,
and a SETREGSET call with a length of zero will leave this
uninitialized. Consequently an arbitrary value will be written back to
target->thread.uw.fpmr, potentially leaking up to 64 bits of memory from
the kernel stack. The read is limited to a specific slot on the stack,
and the issue does not provide a write mechanism.
Fix this by initializing the temporary value before copying the regset
from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG,
NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing
contents of FPMR will be retained.
Before this patch:
| # ./fpmr-test
| Attempting to write NT_ARM_FPMR::fpmr = 0x900d900d900d900d
| SETREGSET(nt=0x40e, len=8) wrote 8 bytes
|
| Attempting to read NT_ARM_FPMR::fpmr
| GETREGSET(nt=0x40e, len=8) read 8 bytes
| Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d
|
| Attempting to write NT_ARM_FPMR (zero length)
| SETREGSET(nt=0x40e, len=0) wrote 0 bytes
|
| Attempting to read NT_ARM_FPMR::fpmr
| GETREGSET(nt=0x40e, len=8) read 8 bytes
| Read NT_ARM_FPMR::fpmr = 0xffff800083963d50
After this patch:
| # ./fpmr-test
| Attempting to write NT_ARM_FPMR::fpmr = 0x900d900d900d900d
| SETREGSET(nt=0x40e, len=8) wrote 8 bytes
|
| Attempting to read NT_ARM_FPMR::fpmr
| GETREGSET(nt=0x40e, len=8) read 8 bytes
| Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d
|
| Attempting to write NT_ARM_FPMR (zero length)
| SETREGSET(nt=0x40e, len=0) wrote 0 bytes
|
| Attempting to read NT_ARM_FPMR::fpmr
| GETREGSET(nt=0x40e, len=8) read 8 bytes
| Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: ptrace: fix partial SETREGSET for NT_ARM_POE
Currently poe_set() doesn't initialize the temporary 'ctrl' variable,
and a SETREGSET call with a length of zero will leave this
uninitialized. Consequently an arbitrary value will be written back to
target->thread.por_el0, potentially leaking up to 64 bits of memory from
the kernel stack. The read is limited to a specific slot on the stack,
and the issue does not provide a write mechanism.
Fix this by initializing the temporary value before copying the regset
from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG,
NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing
contents of POR_EL1 will be retained.
Before this patch:
| # ./poe-test
| Attempting to write NT_ARM_POE::por_el0 = 0x900d900d900d900d
| SETREGSET(nt=0x40f, len=8) wrote 8 bytes
|
| Attempting to read NT_ARM_POE::por_el0
| GETREGSET(nt=0x40f, len=8) read 8 bytes
| Read NT_ARM_POE::por_el0 = 0x900d900d900d900d
|
| Attempting to write NT_ARM_POE (zero length)
| SETREGSET(nt=0x40f, len=0) wrote 0 bytes
|
| Attempting to read NT_ARM_POE::por_el0
| GETREGSET(nt=0x40f, len=8) read 8 bytes
| Read NT_ARM_POE::por_el0 = 0xffff8000839c3d50
After this patch:
| # ./poe-test
| Attempting to write NT_ARM_POE::por_el0 = 0x900d900d900d900d
| SETREGSET(nt=0x40f, len=8) wrote 8 bytes
|
| Attempting to read NT_ARM_POE::por_el0
| GETREGSET(nt=0x40f, len=8) read 8 bytes
| Read NT_ARM_POE::por_el0 = 0x900d900d900d900d
|
| Attempting to write NT_ARM_POE (zero length)
| SETREGSET(nt=0x40f, len=0) wrote 0 bytes
|
| Attempting to read NT_ARM_POE::por_el0
| GETREGSET(nt=0x40f, len=8) read 8 bytes
| Read NT_ARM_POE::por_el0 = 0x900d900d900d900d |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: pltfrm: Dellocate HBA during ufshcd_pltfrm_remove()
This will ensure that the scsi host is cleaned up properly using
scsi_host_dev_release(). Otherwise, it may lead to memory leaks. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Adding array index check to prevent memory corruption
[Why & How]
Array indices out of bound caused memory corruption. Adding checks to
ensure that array index stays in bound. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix handling of plane refcount
[Why]
The mechanism to backup and restore plane states doesn't maintain
refcount, which can cause issues if the refcount of the plane changes
in between backup and restore operations, such as memory leaks if the
refcount was supposed to go down, or double frees / invalid memory
accesses if the refcount was supposed to go up.
[How]
Cache and re-apply current refcount when restoring plane states. |
| In the Linux kernel, the following vulnerability has been resolved:
kunit: Fix potential null dereference in kunit_device_driver_test()
kunit_kzalloc() may return a NULL pointer, dereferencing it without
NULL check may lead to NULL dereference.
Add a NULL check for test_state. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: spinand: winbond: Fix 512GW, 01GW, 01JW and 02JW ECC information
These four chips:
* W25N512GW
* W25N01GW
* W25N01JW
* W25N02JW
all require a single bit of ECC strength and thus feature an on-die
Hamming-like ECC engine. There is no point in filling a ->get_status()
callback for them because the main ECC status bytes are located in
standard places, and retrieving the number of bitflips in case of
corrected chunk is both useless and unsupported (if there are bitflips,
then there is 1 at most, so no need to query the chip for that).
Without this change, a kernel warning triggers every time a bit flips. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix bpf_get_smp_processor_id() on !CONFIG_SMP
On x86-64 calling bpf_get_smp_processor_id() in a kernel with CONFIG_SMP
disabled can trigger the following bug, as pcpu_hot is unavailable:
[ 8.471774] BUG: unable to handle page fault for address: 00000000936a290c
[ 8.471849] #PF: supervisor read access in kernel mode
[ 8.471881] #PF: error_code(0x0000) - not-present page
Fix by inlining a return 0 in the !CONFIG_SMP case. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/MSI: Handle lack of irqdomain gracefully
Alexandre observed a warning emitted from pci_msi_setup_msi_irqs() on a
RISCV platform which does not provide PCI/MSI support:
WARNING: CPU: 1 PID: 1 at drivers/pci/msi/msi.h:121 pci_msi_setup_msi_irqs+0x2c/0x32
__pci_enable_msix_range+0x30c/0x596
pci_msi_setup_msi_irqs+0x2c/0x32
pci_alloc_irq_vectors_affinity+0xb8/0xe2
RISCV uses hierarchical interrupt domains and correctly does not implement
the legacy fallback. The warning triggers from the legacy fallback stub.
That warning is bogus as the PCI/MSI layer knows whether a PCI/MSI parent
domain is associated with the device or not. There is a check for MSI-X,
which has a legacy assumption. But that legacy fallback assumption is only
valid when legacy support is enabled, but otherwise the check should simply
return -ENOTSUPP.
Loongarch tripped over the same problem and blindly enabled legacy support
without implementing the legacy fallbacks. There are weak implementations
which return an error, so the problem was papered over.
Correct pci_msi_domain_supports() to evaluate the legacy mode and add
the missing supported check into the MSI enable path to complete it. |
