| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: ensure valid f_path for page cache sharing
Previously, backing files for page cache sharing were set up with
f_path left as NULL (only f_inode was valid). It worked, but a recent
mincore fix relies on f_path.mnt and crashes (found by "erofs/028" on
7.2-rc4):
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP PTI
CPU: 3 UID: 0 PID: 675528 Comm: fincore Not tainted 7.2.0-rc4-00002-g[]-dirty #1 PREEMPT(lazy)
Hardware name: Red Hat KVM, BIOS 1.16.0-4.al8 04/01/2014
RIP: 0010:__do_sys_mincore+0xc0/0x2c0
...
Specify valid paths using valid disconnected dentries together with
erofs_ishare_mnt instead of leaving f_path empty, so they are more
like real backing files in a pseudo filesystem and standard
backing_file_open() can be used directly. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (sht3x) Fix unaligned accesses
Sashiko reports:
In sht3x_update_client(), the 16-bit temperature and humidity values are
extracted from a stack-allocated byte array using be16_to_cpup(). The
pointers passed to this function are calculated as buf and buf + 3. Since
the difference between the two pointers is an odd number of bytes, at
least one of them is guaranteed to be at an unaligned offset.
This will trigger an alignment fault on strict-alignment architectures
such as ARMv5 or SPARC, resulting in a kernel panic.
Fix the problem by using get_unaligned_be16() instead of be16_to_cpup(),
and put_unaligned_be16() instead of cpu_to_be16(). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Initialize hba->rpmbs list in ufshcd
Initialize the hba->rpmbs list in ufshcd_alloc_host() to prevent NULL
pointer dereference in the device teardown path if ufs_rpmb_probe()
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: pci: Fix NULL dereference on AIBV allocation failure
The airq_iv_create() can return NULL on failure, but the return value was
never checked. If it fails, zdev->aibv will be NULL and fail when
dereferenced in kvm_zpci_set_airq(). Add a NULL check and free the
previously allocated AISB bit and zdev->aisb on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: re-fetch eth header after route_shortcircuit()
Before route_shortcircuit(), the eth header pointer is cached from eth_hdr(skb).
Inside route_shortcircuit(), pskb_may_pull() can be called, which may
reallocate skb->head.
In this case, returning to vxlan_xmit() leaves the cached eth pointer pointing to
freed memory, leading to a use-after-free when dereferencing eth->h_dest.
Fix this by updating eth = eth_hdr(skb) after calling route_shortcircuit(). |
| In the Linux kernel, the following vulnerability has been resolved:
libbpf: Reject non-exclusive metadata maps in the signed loader
The loader verifies map->sha against the metadata hash in its
instructions. map->sha is calculated when BPF_OBJ_GET_INFO_BY_FD is
called on the frozen map.
While the map is frozen, the /signed loader/ must also ensure the map
is exclusive, as, without exclusivity (which a hostile host could just
omit when loading the loader), another BPF program with map access can
mutate the contents afterwards, so the check passes on stale data.
With the extra check as part of the signed loader, it now refuses to
move on with map->sha validation if the host set it up wrongly. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_expect: use conntrack GC to reap expectations
This patch replaces the timer API by GC worker approach for
expectations, as it already happened in many other subsystems.
Use the existing conntrack GC worker to iterate over the local list of
expectations in the master conntrack to reap expired expectations.
Check IPS_HELPER_BIT to run GC for expectations, set it on for nft_ct
expectation which nevers sets it. Hold the expectation spinlock while
iterating over the master conntrack expectation list to synchronize with
nf_ct_remove_expectations(). This also performs runtime packet path
garbage collection through the expectation insertion and lookup
functions while walking over one of the chains of the global expectation
hashtables. Unconfirmed conntrack entries are skipped since ct->ext can
be reallocated and dying are skipped since those will be gone soon.
Set on IPS_HELPER_BIT if the helper ct extension is added, then the new
GC worker does not need to bump the ct refcount to check if the ct->ext
helper is available.
This removes the extra bump on the refcount for expectation timers, this
allows to remove several nf_ct_expect_put() calls after the unlink,
after this update only refcount remains at 1 while on the expectation
hashes.
This patch implicitly addresses a race with the existing timer API
allowing an expectation to access a stale exp->master pointer which has
been already released when expectation removal loses races with an
expiring timer, ie. timer_del() reporting false.
Add a new NF_CT_EXPECT_DEAD flag to reap this expectation via GC. This
is needed by nf_conntrack_unexpect_related() which is called in error
paths to invalidate newly created expectations that has been added into
the hashes. These expectactions cannot be inmediately released as GC or
nf_ct_remove_expectations() could race to make it. On expectation
insert, the runtime GC reaps stale expectations before checking the
expectation limit set by policy.
Set current timestamp in nf_ct_expect_alloc(), then add the expectation
policy timeout (or custom timeout specified added on top of this) to
specify the expectation lifetime. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: sco: Fix a race condition in sco_sock_timeout()
sco_sock_timeout() runs asynchronously and lock_sock(sk). If the socket
is closing while the timer is running, it holds the same lock
(lock_sock(sk)) twice, leading to a deadlock.
CPU 0 CPU 1
==================== ======================
sco_sock_close()
sco_sock_timeout()
lock_sock(sk) // <-- LOCK
__sco_sock_close()
sco_chan_del()
sco_conn_put()
sco_conn_free()
disable_delayed_work_sync()
lock(sk) // <-- SAME LOCK
Fix this by moving disable_delayed_work_sync() outside of lock_sock(sk),
ensuring that no lock_sock(sk) is held before sco_sock_timeout().
Lockdep splat:
WARNING: possible circular locking dependency detected
6.13.0-rc4 #7 Not tainted
syz-executor292/9514 is trying to acquire lock:
ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: rcu_lock_acquire sect/v6.13-rc4/./include/linux/rcupdate.h:337 [inline]
ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: rcu_read_lock sect/v6.13-rc4/./include/linux/rcupdate.h:849 [inline]
ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: start_flush_work sect/v6.13-rc4/kernel/workqueue.c:4137 [inline]
ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: __flush_work+0xd1/0xc40 sect/v6.13-rc4/kernel/workqueue.c:4195
but task is already holding lock:
ffff88807db3a258 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at: lock_sock sect/v6.13-rc4/./include/net/sock.h:1623 [inline]
ffff88807db3a258 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at: sco_sock_close+0x25/0x100 sect/v6.13-rc4/net/bluetooth/sco.c:524
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}:
lock_acquire+0x1c4/0x520 sect/v6.13-rc4/kernel/locking/lockdep.c:5849
lock_sock_nested+0x48/0x130 sect/v6.13-rc4/net/core/sock.c:3622
lock_sock sect/v6.13-rc4/./include/net/sock.h:1623 [inline]
sco_sock_timeout+0xbe/0x270 sect/v6.13-rc4/net/bluetooth/sco.c:158
process_one_work sect/v6.13-rc4/kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa99/0x18f0 sect/v6.13-rc4/kernel/workqueue.c:3310
worker_thread+0x8a9/0xd80 sect/v6.13-rc4/kernel/workqueue.c:3391
kthread+0x2c6/0x360 sect/v6.13-rc4/kernel/kthread.c:389
ret_from_fork+0x4e/0x80 sect/v6.13-rc4/arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 sect/v6.13-rc4/arch/x86/entry/entry_64.S:244
-> #0 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}:
check_prev_add sect/v6.13-rc4/kernel/locking/lockdep.c:3161 [inline]
check_prevs_add sect/v6.13-rc4/kernel/locking/lockdep.c:3280 [inline]
validate_chain+0x1888/0x5760 sect/v6.13-rc4/kernel/locking/lockdep.c:3904
__lock_acquire+0x13b4/0x2120 sect/v6.13-rc4/kernel/locking/lockdep.c:5226
lock_acquire+0x1c4/0x520 sect/v6.13-rc4/kernel/locking/lockdep.c:5849
touch_work_lockdep_map sect/v6.13-rc4/kernel/workqueue.c:3909 [inline]
start_flush_work sect/v6.13-rc4/kernel/workqueue.c:4163 [inline]
__flush_work+0x70f/0xc40 sect/v6.13-rc4/kernel/workqueue.c:4195
__cancel_work_sync sect/v6.13-rc4/kernel/workqueue.c:4351 [inline]
disable_delayed_work_sync+0xbb/0xf0 sect/v6.13-rc4/kernel/workqueue.c:4514
sco_conn_free sect/v6.13-rc4/net/bluetooth/sco.c:95 [inline]
kref_put sect/v6.13-rc4/./include/linux/kref.h:65 [inline]
sco_conn_put+0x18f/0x270 sect/v6.13-rc4/net/bluetooth/sco.c:107
sco_chan_del+0xe2/0x210 sect/v6.13-rc4/net/bluetooth/sco.c:236
sco_sock_close+0x8f/0x100 sect/v6.13-rc4/net/bluetooth/sco.c:526
sco_sock_release+0x62/0x2d0 sect/v6.13-rc4/net/blueto
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Inject SEA if kvm_translate_vncr() can't resolve PFN
kvm_handle_vncr_abort() assumes that s1_walk_result conveys an abort
when kvm_translate_vncr() returns -EFAULT. This is not always the case
as it's possible to encounter 'late' failures on the output of S1
translation, e.g. a GFN outside of the memslots.
Fix it by preparing an external abort before returning from
kvm_translate_vncr(). Get rid of the BUG_ON() in the fault injection
path while at it. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl: Fix CXL_HEADERLOG_SIZE to match RAS Capability size
The CXL r4.0 8.2.4.17.7 RAS Capability Structure has total length 0x58
bytes (CXL_RAS_CAPABILITY_LENGTH); the Header Log occupies the trailing
64 bytes at offset 0x18. CXL_HEADERLOG_SIZE was defined as SZ_512,
eight times the actual on-device size.
header_log_copy() reads CXL_HEADERLOG_SIZE_U32 (128) dwords from the
RAS capability iomap, overrunning the 88-byte mapping by 448 bytes.
The cxl_aer_uncorrectable_error trace event memcpy()s CXL_HEADERLOG_SIZE
(512) bytes from its source. For the CPER caller the source is
struct cxl_ras_capability_regs::header_log[16] (64 bytes) embedded in a
stack-local cxl_cper_prot_err_work_data, so the memcpy reads 448 bytes
of kernel stack into the trace event ring buffer where userspace can
read it via tracefs.
Set CXL_HEADERLOG_SIZE to 64 and derive CXL_HEADERLOG_SIZE_U32 from it,
bringing all iomap readers into agreement on 16 dwords. Userspace tools
such as rasdaemon have grown a dependency on the buggy 512-byte (128 u32)
header_log layout in the cxl_aer_uncorrectable_error trace event. Add
CXL_HEADERLOG_TRACE_SIZE_U32 = 128 and use it for the trace event
__array and its memcpy to preserve that ABI. Both callers now pass a
zero-filled u32[CXL_HEADERLOG_TRACE_SIZE_U32] staging buffer with only
the first CXL_HEADERLOG_SIZE_U32 (16) entries populated from hardware;
the remaining 112 u32s are zero-padded, keeping the 512-byte trace ring
buffer layout intact.
[ dj: Replaced 64 with SZ_64 per RichardC ] |
| In the Linux kernel, the following vulnerability has been resolved:
ufs: core: tracing: Do not dereference pointers in TP_printk()
The trace events in drivers/ufs/core/ufs_trace.h were converted to take a
pointer to the hba structure as an argument for the tracepoint and then in
TP_printk() the printing of the dev_name from the ring buffer was
converted to using the dev dereferenced pointer from the hba saved
pointer.
This is not allowed as the TP_printk() is executed at the time the trace
event is read from /sys/kernel/tracing/trace file. That can happen
literally, seconds, minutes, hours, weeks, days, or even months later!
There is no guarantee that the hba pointer will still exist by the time it
is dereferenced when the "trace" file is read.
Instead, save the device name from the hba pointer at the time the
tracepoint is called and place it into the ring buffer event. Then the
TP_printk() can read the name directly from the ring buffer and remove the
possibility that it will read a freed pointer and crash the kernel.
This was detected when testing the trace event code that looks for
TP_printk() parameters doing illegal derferences[1]
[1] https://lore.kernel.org/all/20260630184836.74d477b6@gandalf.local.home/ |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: vub300: defer reset until cmd_mutex is unlocked
vub300_cmndwork_thread() holds cmd_mutex while it sends a command and
waits for the command response. If the response wait times out,
__vub300_command_response() kills the command URBs and then synchronously
resets the USB device through usb_reset_device().
That reset path re-enters the driver through vub300_pre_reset(), which
also takes cmd_mutex. The worker therefore tries to acquire the same
mutex recursively while it is still holding it from the command path.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the real worker and timeout/reset carrier:
vub300_cmndwork_thread()
__vub300_command_response()
usb_lock_device_for_reset()
usb_reset_device()
vub300_pre_reset()
Lockdep reported the same-task recursive acquisition on cmd_mutex:
WARNING: possible recursive locking detected
... (&test_vub300.cmd_mutex) ... at: usb_reset_device... [vuln_msv]
... (&test_vub300.cmd_mutex) ... at: vub300_cmndwork_thread+0x12/0x20 [vuln_msv]
Workqueue: vub300_cmd_wq vub300_cmndwork_thread [vuln_msv]
*** DEADLOCK ***
Return a flag from __vub300_command_response() when the timeout path needs
a device reset, then perform the reset after vub300_cmndwork_thread() has
cleared the in-flight command state and dropped cmd_mutex. The reset is
still attempted before mmc_request_done(), preserving the existing request
completion ordering while avoiding the recursive lock. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Guard management mailbox channel cleanup against NULL pointer
The management mailbox channel cleanup helpers can be called from
error handling paths when mgmt_chann has already been destroyed.
Add NULL checks to xdna_mailbox_free_channel() and
xdna_mailbox_stop_channel() so the cleanup path safely returns instead
of dereferencing a NULL mailbox channel pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: xilinx: Shutdown and free rx mailbox channel
A mbox rx channel is requested using mbox_request_channel_byname() in
probe. In remove callback, the rx mailbox channel is cleaned up when the
rx_chan is NULL due to incorrect condition check. The mailbox channel is
not shutdown and it can receive messages even after the device removal.
This leads to use after free. Also the channel resources are not freed.
Fix this by checking the rx_chan correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: hisi_sas: Add slave_destroy interface for v3 hw
WARNING is triggered when executing link reset of remote PHY and rmmod
SAS driver simultaneously. Following is the WARNING log:
WARNING: CPU: 61 PID: 21818 at drivers/base/core.c:1347 __device_links_no_driver+0xb4/0xc0
Call trace:
__device_links_no_driver+0xb4/0xc0
device_links_driver_cleanup+0xb0/0xfc
__device_release_driver+0x198/0x23c
device_release_driver+0x38/0x50
bus_remove_device+0x130/0x140
device_del+0x184/0x434
__scsi_remove_device+0x118/0x150
scsi_remove_target+0x1bc/0x240
sas_rphy_remove+0x90/0x94
sas_rphy_delete+0x24/0x3c
sas_destruct_devices+0x64/0xa0 [libsas]
sas_revalidate_domain+0xe4/0x150 [libsas]
process_one_work+0x1e0/0x46c
worker_thread+0x15c/0x464
kthread+0x160/0x170
ret_from_fork+0x10/0x20
---[ end trace 71e059eb58f85d4a ]---
During SAS phy up, link->status is set to DL_STATE_AVAILABLE in
device_links_driver_bound, then this setting influences
__device_links_no_driver() before driver rmmod and caused WARNING.
Add the slave_destroy interface to make sure link is removed after flush
workque. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: spacemit: fix NULL check in spacemit_pin_set_config
spacemit_pin_set_config() looks up the per-pin descriptor with
spacemit_get_pin() then checks the wrong variable for failure:
const struct spacemit_pin *spin = spacemit_get_pin(pctrl, pin);
...
if (!pin)
return -EINVAL;
reg = spacemit_pin_to_reg(pctrl, spin->pin);
pin is an unsigned int pin id, where 0 (GPIO_0 / gmac0_rxdv on K3) is a
valid pin, so rejecting it here drops the PAD config write for the first
pin of every group. On K3 Pico-ITX the GMAC RGMII group lists pin 0 as
its first entry, so its drive-strength / bias configuration was silently
ignored.
The intended guard is against spacemit_get_pin() returning NULL when the
pin id isn't in the SoC's pin table. Check spin instead, which both
restores PAD setup for pin 0 and prevents a NULL deref on spin->pin. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: guard against possible NULL deref in __in6_dev_stats_get()
dev_get_by_index_rcu() could return NULL if the original physical
device is unregistered.
Found by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
rapidio/tsi721: prevent a bad dereference in tsi721_db_dpc()
With a list_for_each() loop, if we don't find the item we are looking for
in the list, then the loop exits with the iterator, which is "dbell" in
this loop, pointing to invalid memory.
This code uses the "found" variable to determine if we have found the
doorbell we are looking for or not. However, the problem that the "found"
variable needs to be set to false at the start of each iteration,
otherwise after the first correct doorbell, then everything is marked as
found.
Reset the "found" to false at the start of the iteration and move the
variable inside the loop. |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/igen6: Fix call trace due to missing release()
When unloading the igen6_edac driver, there is a call trace:
Device '(null)' does not have a release() function, it is broken and must be fixed.
See Documentation/core-api/kobject.rst.
WARNING: drivers/base/core.c:2567 at device_release+0x84/0x90, CPU#5: rmmod/127209
...
RIP: 0010:device_release+0x84/0x90
Call Trace:
<TASK>
kobject_put+0x8c/0x220
put_device+0x17/0x30
igen6_unregister_mcis+0xa2/0xe0 [igen6_edac]
igen6_remove+0x82/0xb0 [igen6_edac]
...
Fix the call trace by providing empty release() functions for the
memory controller devices. |
| In the Linux kernel, the following vulnerability has been resolved:
liveupdate: Reference count incoming FLB data
Increment the incoming FLB refcount in liveupdate_flb_get_incoming() so
that the FLB structure cannot be freed while the caller is actively using
it. Add an additional liveupdate_flb_put_incoming() function so the
caller can explicitly indicate when it is done using the FLB data.
During a Live Update, a subsystem might need to hold onto the incoming
File-Lifecycle-Bound (FLB) data for an extended period, such as during
device enumeration. Incrementing the reference count guarantees that the
data remains valid and accessible until the subsystem releases it,
preventing future use-after-free bugs. |
