| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tls: handle data disappearing from under the TLS ULP
TLS expects that it owns the receive queue of the TCP socket.
This cannot be guaranteed in case the reader of the TCP socket
entered before the TLS ULP was installed, or uses some non-standard
read API (eg. zerocopy ones). Replace the WARN_ON() and a buggy
early exit (which leaves anchor pointing to a freed skb) with real
error handling. Wipe the parsing state and tell the reader to retry.
We already reload the anchor every time we (re)acquire the socket lock,
so the only condition we need to avoid is an out of bounds read
(not having enough bytes in the socket for previously parsed record len).
If some data was read from under TLS but there's enough in the queue
we'll reload and decrypt what is most likely not a valid TLS record.
Leading to some undefined behavior from TLS perspective (corrupting
a stream? missing an alert? missing an attack?) but no kernel crash
should take place. |
| GNU gzip contains a global buffer overflow vulnerability in the LZH decompression logic caused by improper reuse of shared global state between different decompression formats within a single execution. GNU gzip maintains a global array that is shared across the LZ77, LZW, and LZH decompression routines and is not reinitialized between files processed in the same invocation.
By decompressing a specially crafted LZW file followed by a specially crafted LZH file in a single gzip -d command, an attacker can poison the shared global state and subsequently trigger an out‑of‑bounds read in the LZH decoder. The LZH decompression logic follows stale values left in the shared array, causing reads past the end of the allocated global buffer.
This issue has been fixed in commits 63dbf6b3b9e6e781df1a6a64e609b10e23969681 and e7378c2d421be6a286922374425680bbe9ad8b7d. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Improve EP11 CPRB length and overflow checks
The xcrb_msg_to_type6_ep11cprb_msgx() function lacks proper input
validation, creating security vulnerabilities:
1. Missing minimum size validation: The ep11_cprb structure and
subsequent payload fields (pld_tag, pld_lenfmt) are copied from
userspace without verifying sufficient buffer length.
2. Arithmetic overflow in length calculations: CEIL4 alignment could
overflow, bypassing size checks and enabling buffer overflows.
3. The payload is asn1 encoded but the function just uses a simple c
struct overlay to access some fields of the payload.
Fix by using size_t for length calculations, adding U32_MAX boundary
checks after alignment, and validating minimum request size and
minimum reply size before copying from userspace. Do a very simple
asn1 parsing of the payload up to the function value field. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: revalidate ihl to prevent out-of-bounds access
While the outer IP header is already pulled into the skb head,
we must be careful and revalidate the embedded headers after
reading them from the skb frags to prevent out-of-bounds
access.
One such place reported by Sashiko is ip_vs_nat_icmp() where
local process can change the ihl field and after
skb_ensure_writable() we can see larger value which is a
problem for the ip_send_check(cih) calls.
Add check to drop the packet if the ihl field is changed. |
| Improper Validation of Specified Index, Position, or Offset in Input vulnerability in Mitsubishi Electric CNC M800V Series M800VW and M800VS, M80V Series M80V and M80VW, M800 Series M800W and M800S, M80 Series M80 and M80W, E80 Series E80, C80 Series C80, and M700V Series M750VW, M720VW, 730VW, M720VS, M730VS, and M750VS, M70V Series M70V, E70 Series E70 allows a remote attacker to cause an out-of-bounds read, resulting in a denial-of-service condition by sending specially crafted packets to TCP port 683. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_u32: skip hash tables in u32_bind_class()
u32_walk() enumerates both struct tc_u_hnode and struct tc_u_knode
through the walker callback. u32_bind_class() unconditionally casts the
passed fh to tc_u_knode and accesses &n->res, so when fh is actually a
tc_u_hnode, which has no tcf_result member, this results in a
slab-out-of-bounds read of res->classid in tc_cls_bind_class().
The issue can be reproduced with the following commands:
tc qdisc add dev lo root handle 1: hfsc
tc class add dev lo parent 1: classid 1:1 hfsc sc rate 1000kbit
tc filter add dev lo parent 1:1 protocol ip prio 1 u32 match u32 0 0 flowid 1:1
tc class add dev lo parent 1: classid 1:2 hfsc sc rate 2000kbit
Fix this by skipping hash tables via the TC_U32_KEY(handle) check. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: reject oversized IBs with per-ring packet limits
On GFX rings, amdgpu_cs_p2_ib() passed user-supplied ib_bytes through
to ib->length_dw without a limit, while ring_emit_ib() encodes length
into packet fields. Oversized values can corrupt adjacent control bits
and destabilize command submission.
Add a per-ring IB packet size limit helper and reject command
submissions exceeding the corresponding dword limit before IB
allocation. Use the documented 20-bit limit for GFX/compute/SDMA/VPE,
and apply the MM fallback limit for other ring types.
(cherry picked from commit 7f48fa2cf62e3fa6c9c3870aa74988f773247e52) |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: ti: am65-cpsw-nuss: Fix port_id extraction from SRC TAG
On the packet reception path, the ID of the MAC Port on which the packet
was received, is embedded in the RX DMA Descriptor's metadata. The ID is
extracted using the helper function cppi5_desc_get_tags_ids() which fills
in the 16-bit Source Tag into the 'port_id' variable. However, it is only
the lower 8-bits of the 16-bit Source Tag that represent the MAC Port ID,
while the upper 8-bits are Hardware-Reserved and carry an arbitrary value.
With the existing logic, sporadic kernel crash is observed due to the
subsequent driver code accessing out-of-bound memory because of an invalid
port_id.
Hence, fix the port_id extraction logic to use only the lower 8-bits of the
Source Tag as the MAC Port ID. |
| In the Linux kernel, the following vulnerability has been resolved:
macvlan: inherit needed_headroom and needed_tailroom from lowerdev
macvlan devices inherit hard_header_len from lowerdev during macvlan_init(),
but leave needed_headroom and needed_tailroom set to 0.
When the underlying lowerdev requires extra headroom or tailroom for
headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or veth with rx
headroom), upper layers calculating packet headroom and tailroom fail to
reserve sufficient space.
This can result in reallocation overhead, skb headroom underflows, or KASAN
slab-use-after-free crashes when dev_hard_header() / macvlan_hard_header()
prepends header data or when lower devices append tailroom.
Fix this by:
1. Inheriting needed_headroom and needed_tailroom from lowerdev in macvlan_init().
2. Propagating needed_headroom and needed_tailroom updates to attached macvlans
in macvlan_device_event() when receiving NETDEV_FEAT_CHANGE events. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Improve CCA CPRB length and overflow checks
The xcrb_msg_to_type6cprb_msgx() function lacks proper input
validation, creating security vulnerabilities:
1. Integer overflow after CEIL4 alignment: Signed int variables could
overflow during 4-byte boundary alignment, causing undersized
buffer allocations or incorrect bounds checking.
2. Missing minimum size validation: The CPRBX structure is copied from
userspace without verifying sufficient buffer length. Undersized
buffers cause uninitialized memory access when reading structure
fields like cprbx.cprb_len and cprbx.domain.
3. Arithmetic overflow in sum calculations: Adding control block and
data block sizes could overflow, bypassing size checks and enabling
buffer overflows.
Fix by using size_t for length calculations, adding U32_MAX boundary
checks after alignment, validating minimum control block size before
copying from userspace, and detecting sum calculation overflows. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: fix multiple unsafe decodes in decode_locker()
decode_locker() in cls_lock_client.c contains three unsafe decode
operations that allow a malicious or compromised OSD to trigger
slab-out-of-bounds reads:
1. ceph_decode_copy() at the locker_id_t name field has no preceding
bounds check. With p == end after ceph_start_decoding() accepts
struct_len=0, this reads sizeof(ceph_entity_name) = 9 bytes past
the validated buffer boundary.
2. *p += sizeof(struct ceph_timespec) after the locker_info_t header
is an unchecked pointer advance. A malicious OSD can position p
past end, causing all subsequent _safe checks to pass against a
bogus boundary.
3. len = ceph_decode_32(p) has no preceding bounds check, and the
immediately following *p += len is uncapped. A malicious OSD can
send len=0xffffffff, advancing p gigabytes past end and escaping
the decode window entirely.
Fix all three by replacing bare operations with their safe variants:
ceph_decode_copy -> ceph_decode_copy_safe
*p += sizeof(...) -> ceph_decode_skip_n
ceph_decode_32(p) -> ceph_decode_32_safe
*p += len -> ceph_decode_skip_n
A new label is added to return -EINVAL on any bounds violation.
-EINVAL is appropriate here: the data received from the OSD
is structurally malformed, which is an invalid argument to the decode
contract regardless of whether the caller or the wire is at fault.
Attacker model: a malicious or compromised OSD in a multi-tenant Ceph
deployment can trigger this against any kernel client that issues the
lock.get_info class method (e.g. during RBD exclusive lock acquisition)
without any further privileges beyond OSD session establishment.
[ idryomov: use ceph_decode_skip_string() to skip description, trim
changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - block s_input when F54 queue is busy
Changing the input (diagnostic report type) mid-stream changes the
report size. Since V4L2 buffers are allocated based on the size at
stream start, changing the input while streaming could lead to a
heap buffer overflow if the new size is larger than the allocated
buffers.
Prevent this by blocking VIDIOC_S_INPUT with -EBUSY if the V4L2 queue
is busy (streaming). |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: bound mode sysfs output to the sysfs buffer
mode_string() uses snprintf() which can return a value larger than the
remaining buffer space. show_modes() accumulates the return value into i
without checking whether i has reached PAGE_SIZE, causing the offset to
advance past the sysfs buffer if the modelist is long enough.
Add a size parameter to mode_string() and use scnprintf() to return
only the bytes actually written. Add an early return when offset
already exceeds the buffer. In show_modes(), stop accumulating once
the buffer is full. |
| Improper Validation of Specified Quantity in Input vulnerability in Mitsubishi Electric Corporation CC-Link IE TSN Remote I/O module, CC-Link IE TSN Analog-Digital Converter module, CC-Link IE TSN Digital-Analog Converter module, CC-Link IE TSN FPGA module, CC-Link IE TSN Remote Station Communication LSI CP620 with GbE-PHY, MELSEC iQ-R Series CC-Link IE TSN Master/Local Module, MELSEC iQ-R Series Ethernet Interface Module, CC-Link IE TSN Master/Local Station Communication LSI CP610, MELSEC iQ-F Series FX5 CC-Link IE TSN Master/Local Module, MELSEC iQ-F Series FX5 Ethernet Module, MELSEC iQ-F Series FX5-ENET/IP Ethernet Module, and MELSEC iQ-R Series CPU module allows a remote unauthenticated attacker to cause a Denial of Service condition in the products by sending specially crafted UDP packets. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio_ccw: Fix out of bounds check on CCW array
The routine ccwchain_calc_length() counts the number of channel
command words (CCWs) that are chained together in a single channel
program, and rejects anything larger than CCWCHAIN_LEN_MAX (256) CCWs.
The loop itself is "do..while (count < 257)", and while the logic in
is_cpa_within_range() correctly adjusts between the 0-index array of
CCWs and the count of CCWs starting at 1, this means it would look
at a possible 257th CCW before ending the loop and (correctly)
returning an error.
Fix this by restructuring the loop to break as soon as 256 CCWs
(thus indexes 0-255) are examined, without looking at memory
outside the range. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: iforce - validate input packet lengths
iforce_process_packet() reads fixed fields from joystick, wheel and
status packets without first checking their lengths. In particular, the
shared hats-and-buttons helper unconditionally reads data[6]. The status
tail is a sequence of 16-bit effect addresses, but an incomplete final
address is also consumed. A successful zero-length USB URB additionally
reads the packet ID before the common parser is called.
Reject the zero-length USB transfer, require the seven-byte joystick and
wheel prefixes and the two-byte status prefix, and consume only complete
status-tail addresses. |
| Integer overflow in Chromecast in Google Chrome prior to 152.0.7977.65 allowed a remote attacker who had compromised the renderer process to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Buffer overflow in Blink in Google Chrome prior to 152.0.7977.65 allowed a remote attacker who had compromised the renderer process to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| Memory corruption in Tint in Google Chrome on on Mac prior to 152.0.7977.65 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| An issue in libtiff 85f2ac8e0b01cb7db2bbecf4a3b891bdbef67938 allows an attacker to execute arbitrary code via the libtiff/tools/thumbnail.c: main() component |
