| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Netis NX10 firmware V4.0.1.5808 and V3.0.0.4142 contain an information disclosure vulnerability that allows unauthenticated attackers to retrieve the administrator password by sending a request to the sysinfo action in the web management interface without a valid session. Attackers can replay the exposed credential against the login handler to establish a fully authenticated administrator session on the device. |
| IBM WebSphere Application Server 9.0 and 8.5 is affected by a deserialization vulnerability in the Name Service component. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: sd: Fix error handling in sd_probe() after large pool creation failure
After device_add(&sdkp->disk_dev) succeeds, sd_large_pool_create()
failure must unregister disk_dev and let scsi_disk_release() free
sdkp. Going through out_free_index kfree()s an already registered device
and leaks the sysfs entry. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: fix RX data queuing of RRO 3.0
For RRO 3.0, RX data released from a RRO data queue should be put to
the indicator queue. The frames are processed and completed in the
context of the indicator queue NAPI, which only polls skbs queued on
the MT_RXQ_RRO_IND list; frames queued under the data queue id are
left sitting on that list until the data queue NAPI happens to run,
stalling and reordering RX data. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, cgroup: Fix invalid storage access after __cgroup_bpf_attach failed
A potential invalid storage access issue can occur after replacing a
cgroup bpf prog.
This occurs in the following scenario:
1. prog1 with storage is attached to a cgroup in multi-attach mode.
2. prog1 is replaced with prog2 using BPF_F_REPLACE in multi-attach
mode, but fails midway (e.g. in bpf_trampoline_link_cgroup_shim or
update_effective_progs).
3. A new prog3 is attached to the cgroup in multi-attach mode.
The reason is that __cgroup_bpf_attach overwrites pl->storage with the
new storage prior to attachment completion. When attachment fails
midway, the cleanup path calls bpf_cgroup_storages_free(new_storage) to
free the newly allocated storage, but fails to restore pl->storage back
to old_storage.
Consequently, the still-active prog1 holds invalid or dangling storage
pointers, leading to an invalid memory access when prog1 executes and
calls bpf_get_local_storage. Additionally, original pl->flags and
cgrp->bpf.flags[atype] are left unrestored.
Fix this by saving old_pl_flags, old_storage, and old_flags prior to the
update, and properly restoring all of them in the cleanup path on error. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: asus: refactor the two workqueues and init sequence
Multiple issues have been found within the hid-asus driver:
- unchecked size in asus_raw_event()
- unclean teardown of asus_probe on failure
- possible use-after-free in asus_probe
- multiple workqueue used for jobs where one was enough
- sleeping calls in atomic context
- packets of incorrect size being sent to the keyboard controller
Join the two workqueues into one reusing the stopping mechanism
of the brightness workqueue, use the joined workqueue to also
move the asus_wmi_send_event() sleeping call away from atomic
context and add a size check in asus_raw_event(). |
| In the Linux kernel, the following vulnerability has been resolved:
serial: amba-pl011: keep console clock enabled for atomic writes
pl011_console_write_atomic() runs from nbcon atomic context, where
sleeping is not allowed. It calls clk_enable(), which takes the common-clk
enable_lock. Under PREEMPT_RT that is a sleeping lock:
clk_enable_lock() first tries spin_trylock_irqsave(), but on contention
falls back to spin_lock_irqsave(). Therefore, an atomic-context printk on
an RT kernel with a clk-backed pl011 can trip:
BUG: sleeping function called from invalid context at spinlock_rt.c:48
__might_resched from rt_spin_lock
rt_spin_lock from clk_enable_lock
clk_enable_lock from clk_enable
clk_enable from pl011_console_write_atomic
... from vprintk_emit
This was found and reproduced on PREEMPT_RT. Arm32 and arm64 DT SoCs are
affected; arm64 SBSA/ACPI has no clk, so clk_enable(NULL) short-circuits
before the lock. In addition, write_atomic() may be invoked from NMI
context and is documented to avoid locking. Removing clk_enable() from
the callback also avoids a potentially unsafe NMI acquisition of the
common-clock enable_lock.
An nbcon atomic-capable console must be printable from any context, so
the clock cannot be gated between writes. Enable the clock while the
console is available for output: use clk_prepare_enable() in
pl011_console_setup(), release it via clk_disable_unprepare() in the
console .exit() callback, and drop the per-write clk_enable()/clk_disable()
pairs from write_atomic() and write_thread().
When printk suspends consoles, drop the reference after
uart_suspend_port() stops console access and restore it before
uart_resume_port() -- but only if suspend actually marked the port
suspended (a wake-capable tty stays running and must keep its clock), and
keep it when console_suspend_enabled is false so no_console_suspend works.
The active power cost of keeping the clock enabled is platform-dependent:
none where the UART clock is a fixed always-on oscillator, real where it
is a gateable clock branch, which then cannot be gated (nor possibly can
its parent clocks) while the console is available for output. When serial
core actually suspends the port, the reference is released so the clock
provider can gate the clock tree. |
| Jupyter Server is the backend for Jupyter web applications. Prior to version 2.21.0, the 5xx request logging path in jupyter_server/log.py copies the Referer header into a JSON header block without applying the token scrubbing used for the request URI. A request that returns HTTP 500 while the Referer contains a token-bearing URL can therefore write that token to server logs in plaintext. An attacker who can read those logs can recover the token and use the affected user's Jupyter Server permissions. This issue is fixed in version 2.21.0. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa_sim: fix cleanup after worker creation failure
vdpasim_create() leaves vdpasim->worker as an ERR_PTR when
kthread_run_worker() fails. The error path then drops the device
reference, which releases the partially initialized simulator.
vdpasim_free() unconditionally passes the worker pointer to
kthread_destroy_worker(), so the ERR_PTR is dereferenced and can trigger
a general protection fault.
Store the worker error, clear the pointer, and only clean up the worker
when it was successfully initialized. Also make the release path tolerate
partially initialized objects by guarding virtqueue and IOTLB cleanup,
since the same release path can be reached from other initialization
failures.
I found this bug myself, though the patch was written with AI assistance. |
| Composer is a dependency Manager for the PHP language. From 1.0 until 2.2.30 and from 2.3.0 until 2.10.3, a malicious or compromised dependency can bypass the earlier CVE-2026-59946 binary-path hardening because Composer validates literal parent-directory segments only during dependency resolution, while the symlink and installed-metadata paths described by the advisory skip that validation. A package can ship an in-package binary symlink that resolves outside its installation directory, or attacker-influenced vendor/composer/installed.json metadata can provide an escaping binary path during a reinstall or regeneration of missing vendor/bin entries. The installed-metadata path is reachable only when the vendor directory was not populated by the same validated install run, such as when it is restored from an untrusted cache, copied from an earlier build stage, carried over from an older Composer run, or writable by a lower-trust build step. Composer can follow the path, change the external target's permissions to make it world-readable and executable, and create a runnable vendor/bin proxy to that external file. The issue does not directly read or transmit data and does not by itself provide remote code execution. This issue is fixed in versions 2.2.30 and 2.10.3. |
| Under certain circumstances on affected platforms running Arista EOS with gRPC Network Packet Sampling Interface (gNPSI) enabled, the gNPSI client credentials might be logged in clear text in local or remote accounting logs to authenticated users. |
| IBM Cognos Analytics 12.1.0 through 12.1.3 FP1, and 12.0.4 through 12.0.4 FP2 stores sensitive information in source code could be used by an authenticated user in further attacks against the system. |
| b2evolution CMS versions 6.7.8 through 7.2.5 contain an incomplete fix for CVE-2016-8901 where the serialized-array object check in param_check_serialized_array() fails to reject payloads with negative integer array keys. Unauthenticated attackers can submit crafted serialized PHP objects via POST requests to htsrv/call_plugin.php that bypass validation and reach unserialize(), instantiating arbitrary PHP objects with attacker-chosen properties that may enable code execution if suitable POP gadget chains exist. |
| GravitLauncher is an open-source Minecraft launcher based on sashok724's v3. Prior to 5.7.12, an unauthenticated remote actor can send a raw HTTP request target without a leading slash to the default LaunchServer file server on port 9274. FileServerHandler.channelRead0 in components/launchserver/src/main/java/pro/gravit/launchserver/socket/handlers/fileserver/FileServerHandler.java strips the first request-target character and resolves the remaining path against updatesDir without re-normalizing and verifying containment. This leaves parent-directory components in a no-leading-slash request and allows reading any file accessible to the LaunchServer process, including .keys/ecdsa_id, .keys/legacySalt, and LaunchServer.json. Disclosure of those files can expose signing keys, refresh-token material, and database credentials, enabling forged administrative access tokens and full authentication bypass. A normalizing L7 proxy may block the primary request form, but direct exposure and L4/TCP proxies remain affected, and netty.fileServerEnabled is enabled by default. This issue is fixed in 5.7.12. |
| SecObserve versions before 1.59.1 contain an information disclosure vulnerability in the ApiConfigurationSerializer that fails to strip the basic_auth_password field from API configuration responses. View-only product members can retrieve the decrypted basic-auth password of configured scanner or integration service accounts through standard REST endpoints. |
| Angel through 3.3.0 deserializes untrusted setAlgoMetrics payload using Kryo without class registration or allowlist validation. Unauthenticated network attackers can instantiate arbitrary classes or exhaust coordinator memory by sending crafted serialized objects to the master RPC endpoint. |
| admin3 through 3.0.0 persists user session tokens in the audit log event body when publishing UserLoggedIn domain events. Attackers with log:view permission can read the JSON response from the GET /logs endpoint to harvest session tokens and replay them as bearer credentials for full user access. |
| mport is the MidnightBSD Package Manager. Prior to 2.7.8, directory assets handled as ASSET_DIR or ASSET_DIR_OWNER_MODE in libmport/bundle_read_install_pkg.c used path-based mport_mkdirp(), ownership, and permission operations. A local attacker able to modify part of the target installation tree could use dot-dot traversal or substitute symlinks during privileged package installation, causing directory creation or attribute changes to affect attacker-selected paths outside the intended package directories. This issue is fixed in version 2.7.8. |
| mport is the MidnightBSD Package Manager. Prior to 2.7.8, do_actual_install() in libmport/bundle_read_install_pkg.c used path-based lstat(), chown(), stat(), and chmod() operations while installing package files. A local attacker with write access to a target directory could replace a checked file with a symlink before privileged ownership or mode changes were applied, redirecting those changes to an attacker-selected path and compromising filesystem integrity or permissions. This issue is fixed in version 2.7.8. |
| LMDeploy is a toolkit for compressing, deploying, and serving large language models. Starting in version 0.9.1 and prior to version 0.10.2, the LMdeploy implements an rpc server (AsyncRPCServer in zmq_rpc.py) for supporting the RPC communications. In its core functionality call_and_response(), I found it will directly use the pickles.loads() to deserialize the received messages without any sanitization, hence resulting in a remote code execution vulnerability by this RPC server. Version 0.10.2 contains a patch. |
