| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: clear intr_entry in fuse_resend and fuse_remove_pending_req
When fuse_resend() moves a request from fpq->processing back to
fiq->pending, it sets FR_PENDING and clears FR_SENT but does not
remove the requests intr_entry from fiq->interrupts. If the
request had FR_INTERRUPTED set from a prior signal, intr_entry
remains dangling on fiq->interrupts. When the requesting task
then receives a fatal signal, fuse_remove_pending_req() sees
FR_PENDING=1, removes the request from fiq->pending and frees it
via the refcount path, also without cleaning intr_entry. The
stale intr_entry causes use-after-free when fuse_read_interrupt()
iterates fiq->interrupts:
- list_del_init(&req->intr_entry) -> UAF write on freed slab
- req->in.h.unique -> UAF read, data leaked to userspace
Remove intr_entry from fiq->interrupts in fuse_resend() for
interrupted requests before they are placed back on fiq->pending.
Add a WARN_ON if the intr_entry is not empty on request destruction. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Avoid dereferencing NULL VNCR pseudo-TLB
VNCR TLB invalidation occurs from MMU notifiers or TLBI instructions,
and either can race against a vcpu not being onlined yet (no pseudo-TLB
allocated). Similarly, the TLB might be invalid, and the invalidation
should be skipped in this case.
Both kvm_invalidate_vncr_ipa() and kvm_invalidate_vncr_va() are
expected to perform the same checks, except that the latter doesn't
check for the allocation and blindly dereferences the pointer.
Solve this by introducing a new iterator built on top of the usual
kvm_for_each_vcpu() that checks for both of the above conditions,
and convert the two users to it. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: page_ext: add count limit to page_ext_iter_next to prevent invalid PFN access
The page_ext iteration API does not validate if the PFN still belongs to a
valid section while advancing the iterator. When dynamically adding
memory in the hotplug path, it can lead to a NULL pointer dereference
during page_ext_lookup at the boundary of the last valid section when
iterator count equals __pgcount.
The for_each_page_ext() macro calls page_ext_iter_next() as its loop
increment. for_each_page_ext() does a "__page_ext =
page_ext_iter_next(&__iter)" at the end. This causes page_ext_iter_next()
to increment iter->index past __pgcount and call page_ext_lookup(start_pfn
+ __pgcount). During memory hotplug (online), the PFN at start_pfn +
__pgcount may belong to a section that has not yet been initialized,
causing page_ext_lookup() to trigger a NULL pointer dereference.
[ 14.555124][ T846] Call trace:
[ 14.555125][ T846] lookup_page_ext+0x6c/0x108 (P)
[ 14.555127][ T846] page_ext_lookup+0x30/0x3c
[ 14.555129][ T846] __reset_page_owner+0x11c/0x260
[ 14.571201][ T846] __free_pages_ok+0x5e8/0x8e0
[ 14.571204][ T846] __free_pages_core+0x78/0xf0
[ 14.571206][ T846] generic_online_page+0x14/0x24
[ 14.597782][ T846] online_pages+0x178/0x30c
[ 14.597784][ T846] memory_block_change_state+0x284/0x32c
[ 14.597787][ T846] memory_subsys_online+0x4c/0x64
[ 14.597789][ T846] device_online+0x88/0xb0
[ 14.597791][ T846] online_memory_block+0x30/0x40
[ 14.597793][ T846] walk_memory_blocks+0xac/0xe8
[ 14.597794][ T846] add_memory_resource+0x280/0x298
[ 14.656161][ T846] add_memory+0x60/0x98
Move the iteration boundary enforcement inside the iterator functions, so
callers cannot inadvertently access beyond the requested range. |
| In the Linux kernel, the following vulnerability has been resolved:
module: decompress: check return value of module_extend_max_pages()
module_extend_max_pages() calls kvrealloc() internally and returns
-ENOMEM on allocation failure. The return value is never checked.
If the initial allocation fails, info->pages remains NULL and
info->max_pages remains 0. Subsequent calls to module_get_next_page()
will attempt to dynamically grow the array by calling
module_extend_max_pages(info, 0) since info->used_pages is 0. This
results in kvrealloc(NULL, 0) returning ZERO_SIZE_PTR, which is treated
as a success, leading to a dereference of ZERO_SIZE_PTR and a kernel
oops.
Fix: add the missing error check after module_extend_max_pages() and
return immediately on failure. This matches the pattern used by every
other kvrealloc() caller in the module loading path.
[Sami: Corrected the analysis in the commit message.] |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: chacha20poly1305 - validate poly1305 template argument
chachapoly_create() still accepts the compatibility poly1305 parameter
in the template name, but it assumes the second template argument is
always present and immediately passes it to strcmp().
When the argument is missing, crypto_attr_alg_name() returns an error
pointer. Check for that before comparing the name so malformed template
instantiations fail with an error instead of dereferencing the error
pointer in strcmp().
This matches the surrounding Crypto API template pattern where
crypto_attr_alg_name() results are validated before string-specific use. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: composite: fix dead empty check in the USB_DT_OTG handler
The OTG branch of composite_setup() falls back to the first
configuration when none is selected:
if (cdev->config)
config = cdev->config;
else
config = list_first_entry(&cdev->configs,
struct usb_configuration, list);
if (!config)
goto done;
...
memcpy(req->buf, config->descriptors[0], value);
list_first_entry() never returns NULL. On an empty list it returns
container_of() of the list head. So the "if (!config)" check is dead.
When cdev->configs is empty, config points at the head inside struct
usb_composite_dev. config->descriptors[0] reads whatever sits at that
offset. The memcpy copies up to w_length bytes of it into the response
buffer.
cdev->configs can be empty in two cases. One is a teardown race on
gadget unbind with a control transfer in flight. The other is a driver
that sets is_otg before it adds a config. A reproducer that holds
cdev->configs empty triggers a KASAN fault in this branch.
Use list_first_entry_or_null() so the existing check does its job. |
| In the Linux kernel, the following vulnerability has been resolved:
x86,fs/resctrl: Prevent out-of-bounds access while offlining CPU when SNC enabled
The architecture updates the cpu_mask in a domain's header to track which
online CPUs are associated with the domain. When this mask becomes empty
the architecture initiates offline of the domain that includes calling
on resctrl fs to offline the domain. If it is a monitoring domain in
which LLC occupancy is tracked resctrl fs forces the limbo handler to
clear all busy RMID state associated with the domain.
The limbo handler always reads the current event value associated with a
busy RMID irrespective of it being checked as part of regular "is it still
busy" check or whether it will be forced released anyway. When reading an
RMID on a system with SNC enabled the "logical RMID" is converted to the
"physical RMID" and this conversion requires the NUMA node ID of the
resctrl monitoring domain that is in turn determined by querying the NUMA
node ID of any CPU belonging to the monitoring domain.
When the monitoring domain is going offline its cpu_mask is empty causing
the NUMA node ID query via cpu_to_node() to be done with "nr_cpu_ids" as
argument resulting in an out-of-bounds access.
Refactor the limbo handler to skip reading the RMID when the RMID will
just be forced to no longer be dirty in the domain anyway. Add a safety
check to the architecture's RMID reader to protect against this scenario. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: gus: check snd_ctl_new1() return value
snd_ctl_new1() can return NULL when memory allocation fails.
snd_gf1_pcm_volume_control() does not check the return value before
dereferencing kctl->id.index, which can lead to a NULL pointer
dereference.
Add a NULL check after snd_ctl_new1() and return -ENOMEM if it fails. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: virtio: Validate control metadata from the device
virtio-snd control handling trusts the device-provided control type and
value count returned by the device.
That metadata is then used directly to index g_v2a_type_map[] in
virtsnd_kctl_info(), and to size loops and memcpy() operations in
virtsnd_kctl_get() and virtsnd_kctl_put() against fixed-size
virtio_snd_ctl_value and snd_ctl_elem_value arrays.
A buggy or malicious device can therefore trigger out-of-bounds access by
advertising an invalid control type or an oversized value count.
Validate control type and count once in virtsnd_kctl_parse_cfg(), before
querying enumerated items or exposing the control to ALSA. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ti-ads1119: fix PM reference leak in buffer preenable
ads1119_triggered_buffer_preenable() resumes the device with
pm_runtime_resume_and_get() before starting a conversion.
If i2c_smbus_write_byte() fails, the function returns the error directly
and leaves the runtime PM usage counter elevated. The matching
postdisable callback is not called when preenable fails, so the reference
is leaked and the device may remain runtime-active indefinitely.
Store the I2C transfer result in ret and drop the runtime PM reference on
failure before returning the error. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: kxsd9: fix runtime PM imbalance on write_raw() error
kxsd9_write_raw() takes a runtime PM reference with pm_runtime_get_sync()
but returns -EINVAL directly when a scale with a non-zero integer part is
requested, skipping the matching pm_runtime_put_autosuspend(). This leaks
a runtime PM usage-counter reference on every such write, after which the
device can no longer autosuspend.
Set the error code and fall through to the existing put instead of
returning early. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_api: Handle TC_ACT_CONSUMED in tcf_qevent_handle
tcf_classify() can return TC_ACT_CONSUMED while the skb is held by the
defragmentation engine (e.g. act_ct on out-of-order fragments). When
that happens the skb is no longer owned by the caller and must not be
touched again.
tcf_qevent_handle() did not handle TC_ACT_CONSUMED: it fell through the
switch and returned the skb to the caller as if classification had
passed. The only qdisc that wires up qevents today is RED, via three call sites
(qe_mark on RED_PROB_MARK/HARD_MARK, qe_early_drop on congestion_drop)
red_enqueue() was continuing to operate on an skb it no longer owns in this
case -- enqueueing it, dropping it, or updating statistics. Resulting in a UAF.
tc qdisc add dev eth0 root handle 1: red ... qevent early_drop block 10
tc filter add block 10 ... action ct
(with ct defrag enabled and traffic that produces out-of-order
fragments, e.g. a fragmented UDP stream)
Handle TC_ACT_CONSUMED in tcf_qevent_handle() the same way the ingress
and egress fast paths do: treat it as stolen and return NULL without
touching the skb. Unlike the TC_ACT_STOLEN case, the skb must not be
dropped/freed here, as it is no longer owned by us. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - remove unused character device and IOCTLs
The QAT driver exposes a character device (qat_adf_ctl) with IOCTLs
for device configuration, start, stop, status query and enumeration.
These IOCTLs are not part of any public uAPI header and have no known
in-tree or out-of-tree users. Device lifecycle is already managed via
sysfs.
The ioctl interface also increases the attack surface and is the
subject of a number of bug reports.
Remove the character device, the IOCTL definitions, and the related
data structures (adf_dev_status_info, adf_user_cfg_key_val,
adf_user_cfg_section, adf_user_cfg_ctl_data). Drop the now-unused
adf_cfg_user.h header and strip adf_ctl_drv.c down to the minimal
module_init/module_exit hooks for workqueue, AER, and crypto/compression
algorithm registration.
Clean up leftover dead code that was only reachable from the removed
IOCTL paths: adf_cfg_del_all(), adf_devmgr_verify_id(),
adf_devmgr_get_num_dev(), adf_devmgr_get_dev_by_id(),
adf_get_vf_real_id() and the unused ADF_CFG macros.
Additionally, drop the entry associated to QAT IOCTLs in
ioctl-number.rst. |
| In the Linux kernel, the following vulnerability has been resolved:
net/handshake: Take a long-lived file reference at submit
handshake_nl_accept_doit() needs the file pointer backing
req->hr_sk->sk_socket to survive the window between
handshake_req_next() and the subsequent FD_PREPARE() and get_file().
The submit-side sock_hold() does not provide that. sk_refcnt keeps
struct sock alive, but struct socket is owned by sock->file: when
the consumer fputs the last file reference, sock_release() tears
the socket down regardless of any sock_hold.
Add an hr_file pointer to struct handshake_req and acquire an
explicit reference on sock->file during handshake_req_submit().
handshake_complete() and handshake_req_cancel() release the
reference on the completion-bit-winning path.
The submit error path must also release the file reference, but
after rhashtable insertion a concurrent handshake_req_cancel() can
discover the request and race the error path. Gate the error-path
cleanup -- sk_destruct restoration, fput, and request destruction
-- with test_and_set_bit(HANDSHAKE_F_REQ_COMPLETED), the same
serialization handshake_complete() and handshake_req_cancel()
already use. When cancel has already claimed ownership, the submit
error path returns without touching the request; socket teardown
handles final destruction.
The accept-side dereferences are not yet retargeted; that change
comes in the next patch. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: vme_user: bound slave read/write to the kern_buf size
The SLAVE-path helpers buffer_to_user() and buffer_from_user() copy
'count' bytes into/out of the fixed-size kern_buf (size_buf ==
PCI_BUF_SIZE == 0x20000, 128 KiB) using *ppos as the offset, without
bounding *ppos + count against size_buf.
vme_user_write()/vme_user_read() only clamp count to the VME window size
(image_size = vme_get_size(resource)), which VME_SET_SLAVE sets from the
user-supplied slave.size -- validated against the VME address space (up
to VME_A32_MAX = 4 GiB), not against PCI_BUF_SIZE. When the window
exceeds 128 KiB, a write()/read() copies past the kern_buf allocation.
Clamp count against size_buf in both helpers, with an early return when
*ppos is already at/after the buffer end. *ppos is >= 0 here (the caller
rejects negative offsets), so size_buf - *ppos cannot wrap. This mirrors
the existing clamp in the MASTER-path helpers resource_to_user() /
resource_from_user(), and matches the read()/write() convention of a
short transfer at end-of-buffer.
Found by static analysis (CodeQL taint tracking + CBMC bounded model
checking) and confirmed dynamically under KASAN with the vme_fake bridge:
BUG: KASAN: slab-out-of-bounds in _copy_from_user+0x2d/0x80
Write of size 262144 at addr ffff888004100000 by task trigger/68
_copy_from_user+0x2d/0x80
vme_user_write+0x13e/0x240 [vme_user]
vfs_write+0x1b8/0x7a0
ksys_write+0xb8/0x150 |
| In the Linux kernel, the following vulnerability has been resolved:
staging: media: ipu7: fix double-free and use-after-free in error paths
In both ipu7_isys_init() and ipu7_psys_init(), pdata is allocated and
then passed to ipu7_bus_initialize_device(), which stores it in
adev->pdata. The ipu7_bus_release() function frees adev->pdata when the
device's reference count drops to zero.
Two error paths incorrectly call kfree(pdata) after the device teardown
has already freed it:
1. When ipu7_mmu_init() fails: put_device() is called, which drops the
reference count to zero and triggers ipu7_bus_release() ->
kfree(pdata). The subsequent kfree(pdata) is a double-free.
2. When ipu7_bus_add_device() fails: it calls auxiliary_device_uninit()
internally, which calls put_device() -> ipu7_bus_release() ->
kfree(pdata). The subsequent kfree(pdata) is again a double-free.
Note that the kfree(pdata) when ipu7_bus_initialize_device() itself
fails is correct, because in that case auxiliary_device_init() failed
and the release function was never set up, so pdata must be freed
manually.
Additionally, the error code was not saved before calling put_device(),
causing ERR_CAST() to dereference the already-freed adev pointer when
constructing the return value. Fix this by saving the error from
dev_err_probe() before put_device() and returning ERR_PTR() instead.
Remove the redundant kfree(pdata) calls and fix the use-after-free in
the return values of the two affected error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB read in OnAssocRsp() IE loop
The IE parsing loop in OnAssocRsp() advances by (pIE->length + 2) each
iteration but only guards on i < pkt_len. When a malicious AP sends an
AssocResponse whose last IE has only one byte remaining in the frame
(the element_id byte lands at pkt_len-1), the loop reads pIE->length
from pframe[pkt_len], which is one byte past the allocated receive buffer.
Additionally, even when the header bytes are in bounds, pIE->length
itself can extend the data window beyond pkt_len, silently passing a
truncated IE to the handler functions.
Add two guards at the top of the loop body:
1. Break if fewer than sizeof(*pIE) bytes remain (can't read header).
2. Break if the IE's declared data extends past pkt_len. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB reads in rtw_get_sec_ie(), rtw_get_wapi_ie(), and rtw_get_wps_attr()
Three IE/attribute parsing functions have missing bounds checks.
rtw_get_sec_ie() and rtw_get_wapi_ie() iterate over a raw IE buffer
without verifying that the header bytes (tag + length) are within the
remaining buffer before reading them. Additionally, rtw_get_sec_ie()
compares the 4-byte WPA OUI at cnt+2 without checking that at least
6 bytes remain, and rtw_get_wapi_ie() compares a 4-byte WAPI OUI at
cnt+6 without checking that at least 10 bytes remain.
rtw_get_wps_attr() reads wps_ie[0] and wps_ie+2 unconditionally at
entry, before verifying that wps_ielen is large enough to contain
the 6-byte WPS IE header (element_id + length + 4-byte OUI). Inside
the attribute loop, get_unaligned_be16() is called on attr_ptr and
attr_ptr+2 without checking that 4 bytes remain in the buffer.
Add a cnt+2 bounds check before each loop body in rtw_get_sec_ie()
and rtw_get_wapi_ie(), guard each multi-byte comparison with a minimum
IE length requirement, add a wps_ielen < 6 early return in
rtw_get_wps_attr(), and add a 4-byte bounds check in its inner loop. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: krb5 - filter out async aead implementations at alloc
krb5_aead_encrypt(), krb5_aead_decrypt() in rfc3961_simplified.c and
rfc8009_encrypt(), rfc8009_decrypt() in rfc8009_aes2.c set a NULL
completion callback and treat any negative return from
crypto_aead_{encrypt,decrypt}() as terminal, falling through to
kfree_sensitive(buffer). When the encrypt_name resolves to an
async AEAD instance the request returns -EINPROGRESS, the buffer
is freed while the backend's worker still holds a pointer, and the
worker dereferences the freed slab on completion.
KASAN report under UML+SLUB with a synthetic async aead backend
bound to krb5->encrypt_name:
BUG: KASAN: slab-use-after-free in t5_stub_complete+0x7d/0xc7
The helpers were written synchronously, so filter the async
instances out at allocation time instead of plumbing
crypto_wait_req() through every call site.
Reachable via net/rxrpc/rxgk.c, fs/afs/cm_security.c and
net/ceph/crypto.c on systems with an async AEAD provider bound to
the krb5 enctype name. |
| In the Linux kernel, the following vulnerability has been resolved:
audit: Fix data races of skb_queue_len() readers on audit_queue
Multiple readers access audit_queue.qlen via skb_queue_len() without
holding the queue lock or using READ_ONCE(), while kauditd writes to
this field via the skb_dequeue() → __skb_unlink() path with WRITE_ONCE()
protected by a spinlock. This constitutes data races.
All affected skb_queue_len(&audit_queue) call sites:
- kauditd_thread() wait_event_freezable() condition
- audit_receive_msg() AUDIT_GET handler (s.backlog assignment)
- audit_receive() backlog check
- audit_log_start() backlog check and pr_warn()
KCSAN reports the following conflicting access pattern (one example):
==================================================================
BUG: KCSAN: data-race in audit_log_start / skb_dequeue
write (marked) to 0xffffffff8512ee20 of 4 bytes by task 661 on cpu 57:
skb_dequeue+0x70/0xf0
kauditd_send_queue+0x71/0x220
kauditd_thread+0x1cb/0x430
kthread+0x1c2/0x210
ret_from_fork+0x162/0x1a0
ret_from_fork_asm+0x1a/0x30
read to 0xffffffff8512ee20 of 4 bytes by task 36586 on cpu 1:
audit_log_start+0x2a0/0x6b0
audit_core_dumps+0x64/0xa0
do_coredump+0x14b/0x1260
get_signal+0xeb2/0xf70
arch_do_signal_or_restart+0x41/0x170
exit_to_user_mode_loop+0xa2/0x1c0
do_syscall_64+0x1a3/0x1c0
entry_SYSCALL_64_after_hwframe+0x76/0xe0
value changed: 0x00000001 -> 0x00000000
==================================================================
Resolve the race by switching to lockless helper skb_queue_len_lockless(),
which internally uses READ_ONCE() and properly pairs with the WRITE_ONCE()
write accesses already present on the writer side.
[PM: line length tweak] |
