| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in a policy-based Cisco Application Visibility and Control (AVC) implementation of Cisco AsyncOS Software for Cisco Secure Web Appliance could allow an unauthenticated, remote attacker to evade the antivirus scanner and download a malicious file onto an endpoint.
The vulnerability is due to improper handling of a crafted range request header. An attacker could exploit this vulnerability by sending an HTTP request with a crafted range request header through the affected device. A successful exploit could allow the attacker to evade the antivirus scanner and download malware onto the endpoint without detection by Cisco Secure Web Appliance. |
| File Browser provides a file managing interface within a specified directory and it can be used to upload, delete, preview, rename, and edit files. In version 2.38.0, a Denial of Service (DoS) vulnerability exists in the file processing logic when reading a file on endpoint `Filebrowser-Server-IP:PORT/files/{file-name}` . While the server correctly handles and stores uploaded files, it attempts to load the entire content into memory during read operations without size checks or resource limits. This allows an authenticated user to upload a large file and trigger uncontrolled memory consumption on read, potentially crashing the server and making it unresponsive. As of time of publication, no known patches are available. |
| File Browser provides a file managing interface within a specified directory and it can be used to upload, delete, preview, rename, and edit files. In version 2.39.0, File Browser’s authentication system issues long-lived JWT tokens that remain valid even after the user logs out. As of time of publication, no known patches exist. |
| OpenCTI is an open source platform for managing cyber threat intelligence knowledge and observables. Prior to version 6.6.6, an IDOR vulnerability in the GrapQL `NotificationLineNotificationMarkReadMutation` and `NotificationLineNotificationDeleteMutation` mutations of OpenCTI allows an authenticated user to change the read status of a notification or delete a notification of another user in case he has knowledge of the UUID of the notification. When changing the read status of a notification, the user also receives the content of the notification they changed the read status of. Authenticated Users in OpenCTI can read, modify and delete notification of other users if they know the UUID of the notification. Version 6.6.6 fixes the issue. |
| An issue was discovered in GitLab CE/EE affecting all versions starting from 15.5 before 17.5.5, 17.6 before 17.6.3, and 17.7 before 17.7.1, in which unauthorized users could manipulate the status of issues in public projects. |
| An issue was discovered in GitLab CE/EE affecting all versions starting from 15.7 prior to 17.5.5, starting from 17.6 prior to 17.6.3, and starting from 17.7 prior to 17.7.1. It was possible to trigger a DoS by creating cyclic references between epics. |
| An issue was discovered in GitLab CE/EE affecting all versions starting from 16.4 prior to 17.5.5, starting from 17.6 prior to 17.6.3, and starting from 17.7 prior to 17.7.1. When a user is created via the SAML provider, the external groups setting overrides the external provider configuration. As a result, the user may not be marked as external thereby giving those users access to internal projects or groups. |
| A vulnerability in the Network Configuration Access Control Module (NACM) of Cisco IOS XE Software could allow an authenticated, remote attacker to obtain unauthorized read access to configuration or operational data.
This vulnerability exists because a subtle change in inner API call behavior causes results to be filtered incorrectly. An attacker could exploit this vulnerability by using either NETCONF, RESTCONF, or gRPC Network Management Interface (gNMI) protocols and query data on paths that may have been denied by the NACM configuration. A successful exploit could allow the attacker to access data that should have been restricted according to the NACM configuration.
Note: This vulnerability requires that the attacker obtain the credentials from a valid user with privileges lower than 15, and that NACM was configured to provide restricted read access for that user. |
| A vulnerability in the Cisco Express Forwarding functionality of Cisco IOS XE Software for Cisco ASR 903 Aggregation Services Routers with Route Switch Processor 3 (RSP3C) could allow an unauthenticated, adjacent attacker to trigger a denial of service (DoS) condition.
This vulnerability is due to improper memory management when Cisco IOS XE Software is processing Address Resolution Protocol (ARP) messages. An attacker could exploit this vulnerability by sending crafted ARP messages at a high rate over a period of time to an affected device. A successful exploit could allow the attacker to exhaust system resources, which eventually triggers a reload of the active route switch processor (RSP). If a redundant RSP is not present, the router reloads. |
| A vulnerability in the implementation of the Simple Network Management Protocol Version 3 (SNMPv3) feature of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to poll an affected device using SNMP, even if the device is configured to deny SNMP traffic from an unauthorized source or the SNMPv3 username is removed from the configuration.
This vulnerability exists because of the way that the SNMPv3 configuration is stored in the Cisco IOS Software and Cisco IOS XE Software startup configuration. An attacker could exploit this vulnerability by polling an affected device from a source address that should have been denied. A successful exploit could allow the attacker to perform SNMP operations from a source that should be denied.
Note: The attacker has no control of the SNMPv3 configuration. To exploit this vulnerability, the attacker must have valid SNMPv3 user credentials.
For more information, see the section of this advisory. |
| A vulnerability in the access control list (ACL) programming of Cisco IOS Software that is running on Cisco Catalyst 1000 Switches and Cisco Catalyst 2960L Switches could allow an unauthenticated, remote attacker to bypass a configured ACL.
This vulnerability is due to the use of both an IPv4 ACL and a dynamic ACL of IP Source Guard on the same interface, which is an unsupported configuration. An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to bypass an ACL on the affected device.
Note: Cisco documentation has been updated to reflect that this is an unsupported configuration. However, Cisco is publishing this advisory because the device will not prevent an administrator from configuring both features on the same interface. There are no plans to implement the ability to configure both features on the same interface on Cisco Catalyst 1000 or Catalyst 2960L Switches. |
| NULL pointer dereference in some Zoom Workplace Apps for Windows may allow an authenticated user to conduct a denial of service via network access. |
| NULL pointer dereference in some Zoom Workplace Apps for Windows may allow an authenticated user to conduct a denial of service via network access. |
| A vulnerability in Cisco IOS Software for Cisco Catalyst 2960X, 2960XR, 2960CX, and 3560CX Series Switches could allow an authenticated, local attacker with privilege level 15 or an unauthenticated attacker with physical access to the device to execute persistent code at boot time and break the chain of trust.
This vulnerability is due to missing signature verification for specific files that may be loaded during the device boot process. An attacker could exploit this vulnerability by placing a crafted file into a specific location on an affected device. A successful exploit could allow the attacker to execute arbitrary code at boot time.
Because this allows the attacker to bypass a major security feature of the device, Cisco has raised the Security Impact Rating (SIR) of this advisory from Medium to High. |
| com_line() in command.c in gnuplot 5.4 leads to an out-of-bounds-write from strncpy() that may lead to arbitrary code execution. |
| cpp-httplib version v0.17.3 through v0.18.3 fails to filter CRLF characters ("\r\n") when those are prefixed with a null byte. This enables attackers to exploit CRLF injection that could further lead to HTTP Response Splitting, XSS, and more. |
| A vulnerability in certificate validation processing of Cisco Catalyst SD-WAN Manager, formerly Cisco SD-WAN vManage, could allow an unauthenticated, remote attacker to gain access to sensitive information.
This vulnerability is due to improper validation of certificates that are used by the Smart Licensing feature. An attacker with a privileged network position could exploit this vulnerability by intercepting traffic that is sent over the Internet. A successful exploit could allow the attacker to gain access to sensitive information, including credentials used by the device to connect to Cisco cloud services. |
| A vulnerability in the application data endpoints of Cisco Catalyst SD-WAN Manager, formerly Cisco SD-WAN vManage, could allow an authenticated, remote attacker to write arbitrary files to an affected system.
This vulnerability is due to improper validation of requests to APIs. An attacker could exploit this vulnerability by sending malicious requests to an API within the affected system. A successful exploit could allow the attacker to conduct directory traversal attacks and write files to an arbitrary location on the affected system. |
| A vulnerability in the access control list (ACL) processing in the egress direction of Cisco IOS XR Software could allow an unauthenticated, remote attacker to bypass a configured ACL.
This vulnerability exists because certain packets are handled incorrectly when they are received on an ingress interface on one line card and destined out of an egress interface on another line card where the egress ACL is configured. An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to bypass an egress ACL on the affected device.
For more information about this vulnerability, see the section of this advisory.
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| A vulnerability in the hybrid access control list (ACL) processing of IPv4 packets in Cisco IOS XR Software could allow an unauthenticated, remote attacker to bypass a configured ACL.
This vulnerability is due to incorrect handling of packets when a specific configuration of the hybrid ACL exists. An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to bypass a configured ACL on the affected device.
For more information, see the section of this advisory.
Cisco has released software updates that address this vulnerability. There are workarounds that address this vulnerability. |
