Export limit exceeded: 47185 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (47185 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-37743 | 1 Linux | 1 Linux Kernel | 2025-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Avoid memory leak while enabling statistics Driver uses monitor destination rings for extended statistics mode and standalone monitor mode. In extended statistics mode, TLVs are parsed from the buffer received from the monitor destination ring and assigned to the ppdu_info structure to update per-packet statistics. In standalone monitor mode, along with per-packet statistics, the packet data (payload) is captured, and the driver updates per MSDU to mac80211. When the AP interface is enabled, only extended statistics mode is activated. As part of enabling monitor rings for collecting statistics, the driver subscribes to HAL_RX_MPDU_START TLV in the filter configuration. This TLV is received from the monitor destination ring, and kzalloc for the mon_mpdu object occurs, which is not freed, leading to a memory leak. The kzalloc for the mon_mpdu object is only required while enabling the standalone monitor interface. This causes a memory leak while enabling extended statistics mode in the driver. Fix this memory leak by removing the kzalloc for the mon_mpdu object in the HAL_RX_MPDU_START TLV handling. Additionally, remove the standalone monitor mode handlings in the HAL_MON_BUF_ADDR and HAL_RX_MSDU_END TLVs. These TLV tags will be handled properly when enabling standalone monitor mode in the future. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 | ||||
| CVE-2025-23162 | 1 Linux | 1 Linux Kernel | 2025-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/vf: Don't try to trigger a full GT reset if VF VFs don't have access to the GDRST(0x941c) register that driver uses to reset a GT. Attempt to trigger a reset using debugfs: $ cat /sys/kernel/debug/dri/0000:00:02.1/gt0/force_reset or due to a hang condition detected by the driver leads to: [ ] xe 0000:00:02.1: [drm] GT0: trying reset from force_reset [xe] [ ] xe 0000:00:02.1: [drm] GT0: reset queued [ ] xe 0000:00:02.1: [drm] GT0: reset started [ ] ------------[ cut here ]------------ [ ] xe 0000:00:02.1: [drm] GT0: VF is trying to write 0x1 to an inaccessible register 0x941c+0x0 [ ] WARNING: CPU: 3 PID: 3069 at drivers/gpu/drm/xe/xe_gt_sriov_vf.c:996 xe_gt_sriov_vf_write32+0xc6/0x580 [xe] [ ] RIP: 0010:xe_gt_sriov_vf_write32+0xc6/0x580 [xe] [ ] Call Trace: [ ] <TASK> [ ] ? show_regs+0x6c/0x80 [ ] ? __warn+0x93/0x1c0 [ ] ? xe_gt_sriov_vf_write32+0xc6/0x580 [xe] [ ] ? report_bug+0x182/0x1b0 [ ] ? handle_bug+0x6e/0xb0 [ ] ? exc_invalid_op+0x18/0x80 [ ] ? asm_exc_invalid_op+0x1b/0x20 [ ] ? xe_gt_sriov_vf_write32+0xc6/0x580 [xe] [ ] ? xe_gt_sriov_vf_write32+0xc6/0x580 [xe] [ ] ? xe_gt_tlb_invalidation_reset+0xef/0x110 [xe] [ ] ? __mutex_unlock_slowpath+0x41/0x2e0 [ ] xe_mmio_write32+0x64/0x150 [xe] [ ] do_gt_reset+0x2f/0xa0 [xe] [ ] gt_reset_worker+0x14e/0x1e0 [xe] [ ] process_one_work+0x21c/0x740 [ ] worker_thread+0x1db/0x3c0 Fix that by sending H2G VF_RESET(0x5507) action instead. | ||||
| CVE-2025-23154 | 1 Linux | 1 Linux Kernel | 2025-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/net: fix io_req_post_cqe abuse by send bundle [ 114.987980][ T5313] WARNING: CPU: 6 PID: 5313 at io_uring/io_uring.c:872 io_req_post_cqe+0x12e/0x4f0 [ 114.991597][ T5313] RIP: 0010:io_req_post_cqe+0x12e/0x4f0 [ 115.001880][ T5313] Call Trace: [ 115.002222][ T5313] <TASK> [ 115.007813][ T5313] io_send+0x4fe/0x10f0 [ 115.009317][ T5313] io_issue_sqe+0x1a6/0x1740 [ 115.012094][ T5313] io_wq_submit_work+0x38b/0xed0 [ 115.013223][ T5313] io_worker_handle_work+0x62a/0x1600 [ 115.013876][ T5313] io_wq_worker+0x34f/0xdf0 As the comment states, io_req_post_cqe() should only be used by multishot requests, i.e. REQ_F_APOLL_MULTISHOT, which bundled sends are not. Add a flag signifying whether a request wants to post multiple CQEs. Eventually REQ_F_APOLL_MULTISHOT should imply the new flag, but that's left out for simplicity. | ||||
| CVE-2025-23153 | 1 Linux | 1 Linux Kernel | 2025-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm/crc-t10dif: fix use of out-of-scope array in crc_t10dif_arch() Fix a silly bug where an array was used outside of its scope. | ||||
| CVE-2022-49791 | 1 Linux | 1 Linux Kernel | 2025-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring: fix multishot accept request leaks Having REQ_F_POLLED set doesn't guarantee that the request is executed as a multishot from the polling path. Fortunately for us, if the code thinks it's multishot issue when it's not, it can only ask to skip completion so leaking the request. Use issue_flags to mark multipoll issues. | ||||
| CVE-2022-49790 | 1 Linux | 1 Linux Kernel | 2025-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: iforce - invert valid length check when fetching device IDs syzbot is reporting uninitialized value at iforce_init_device() [1], for commit 6ac0aec6b0a6 ("Input: iforce - allow callers supply data buffer when fetching device IDs") is checking that valid length is shorter than bytes to read. Since iforce_get_id_packet() stores valid length when returning 0, the caller needs to check that valid length is longer than or equals to bytes to read. | ||||
| CVE-2025-37766 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Prevent division by zero The user can set any speed value. If speed is greater than UINT_MAX/8, division by zero is possible. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2025-37767 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Prevent division by zero The user can set any speed value. If speed is greater than UINT_MAX/8, division by zero is possible. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2025-37768 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Prevent division by zero The user can set any speed value. If speed is greater than UINT_MAX/8, division by zero is possible. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2025-37769 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm/smu11: Prevent division by zero The user can set any speed value. If speed is greater than UINT_MAX/8, division by zero is possible. Found by Linux Verification Center (linuxtesting.org) with SVACE. (cherry picked from commit da7dc714a8f8e1c9fc33c57cd63583779a3bef71) | ||||
| CVE-2025-37770 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Prevent division by zero The user can set any speed value. If speed is greater than UINT_MAX/8, division by zero is possible. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2025-37771 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Prevent division by zero The user can set any speed value. If speed is greater than UINT_MAX/8, division by zero is possible. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2025-58460 | 1 Jenkins | 2 Jenkins, Opentelemetry | 2025-11-04 | 4.2 Medium |
| A missing permission check in Jenkins OpenTelemetry Plugin 3.1543.v8446b_92b_cd64 and earlier allows attackers with Overall/Read permission to connect to an attacker-specified URL using attacker-specified credentials IDs obtained through another method, capturing credentials stored in Jenkins. | ||||
| CVE-2025-58459 | 1 Jenkins | 3 Global-build-stats, Global Build Stats, Jenkins | 2025-11-04 | 4.3 Medium |
| Jenkins global-build-stats Plugin 322.v22f4db_18e2dd and earlier does not perform permission checks in its REST API endpoints, allowing attackers with Overall/Read permission to enumerate graph IDs. | ||||
| CVE-2025-58458 | 1 Jenkins | 2 Git Client, Git Client Plugin | 2025-11-04 | 4.3 Medium |
| In Jenkins Git client Plugin 6.3.2 and earlier, except 6.1.4 and 6.2.1, Git URL field form validation responses differ based on whether the specified file path exists on the controller when specifying `amazon-s3` protocol for use with JGit, allowing attackers with Overall/Read permission to check for the existence of an attacker-specified file path on the Jenkins controller file system. | ||||
| CVE-2025-57833 | 1 Djangoproject | 1 Django | 2025-11-04 | 7.1 High |
| An issue was discovered in Django 4.2 before 4.2.24, 5.1 before 5.1.12, and 5.2 before 5.2.6. FilteredRelation is subject to SQL injection in column aliases, using a suitably crafted dictionary, with dictionary expansion, as the **kwargs passed QuerySet.annotate() or QuerySet.alias(). | ||||
| CVE-2025-55039 | 1 Apache | 1 Spark | 2025-11-04 | 6.5 Medium |
| This issue affects Apache Spark versions before 3.4.4, 3.5.2 and 4.0.0. Apache Spark versions before 4.0.0, 3.5.2 and 3.4.4 use an insecure default network encryption cipher for RPC communication between nodes. When spark.network.crypto.enabled is set to true (it is set to false by default), but spark.network.crypto.cipher is not explicitly configured, Spark defaults to AES in CTR mode (AES/CTR/NoPadding), which provides encryption without authentication. This vulnerability allows a man-in-the-middle attacker to modify encrypted RPC traffic undetected by flipping bits in ciphertext, potentially compromising heartbeat messages or application data and affecting the integrity of Spark workflows. To mitigate this issue, users should either configure spark.network.crypto.cipher to AES/GCM/NoPadding to enable authenticated encryption or enable SSL encryption by setting spark.ssl.enabled to true, which provides stronger transport security. | ||||
| CVE-2025-54831 | 1 Apache | 1 Airflow | 2025-11-04 | 6.5 Medium |
| Apache Airflow 3 introduced a change to the handling of sensitive information in Connections. The intent was to restrict access to sensitive connection fields to Connection Editing Users, effectively applying a "write-only" model for sensitive values. In Airflow 3.0.3, this model was unintentionally violated: sensitive connection information could be viewed by users with READ permissions through both the API and the UI. This behavior also bypassed the `AIRFLOW__CORE__HIDE_SENSITIVE_VAR_CONN_FIELDS` configuration option. This issue does not affect Airflow 2.x, where exposing sensitive information to connection editors was the intended and documented behavior. Users of Airflow 3.0.3 are advised to upgrade Airflow to >=3.0.4. | ||||
| CVE-2025-54409 | 2 Advanced Intrusion Detection Environment Project, Aide Project | 2 Advanced Intrusion Detection Environment, Aide | 2025-11-04 | 6.2 Medium |
| AIDE is an advanced intrusion detection environment. From versions 0.13 to 0.19.1, there is a null pointer dereference vulnerability in AIDE. An attacker can crash the program during report printing or database listing after setting extended file attributes with an empty attribute value or with a key containing a comma. A local user might exploit this to cause a local denial of service. This issue has been patched in version 0.19.2. A workaround involves removing xattrs group from rules matching files on affected file systems. | ||||
| CVE-2025-54090 | 1 Apache | 1 Http Server | 2025-11-04 | 6.3 Medium |
| A bug in Apache HTTP Server 2.4.64 results in all "RewriteCond expr ..." tests evaluating as "true". Users are recommended to upgrade to version 2.4.65, which fixes the issue. | ||||