| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
igb: Fix potential invalid memory access in igb_init_module()
The pci_register_driver() can fail and when this happened, the dca_notifier
needs to be unregistered, otherwise the dca_notifier can be called when
igb fails to install, resulting to invalid memory access. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: ip_tunnel: Fix suspicious RCU usage warning in ip_tunnel_find()
The per-netns IP tunnel hash table is protected by the RTNL mutex and
ip_tunnel_find() is only called from the control path where the mutex is
taken.
Add a lockdep expression to hlist_for_each_entry_rcu() in
ip_tunnel_find() in order to validate that the mutex is held and to
silence the suspicious RCU usage warning [1].
[1]
WARNING: suspicious RCU usage
6.12.0-rc3-custom-gd95d9a31aceb #139 Not tainted
-----------------------------
net/ipv4/ip_tunnel.c:221 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/362:
#0: ffffffff86fc7cb0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x377/0xf60
stack backtrace:
CPU: 12 UID: 0 PID: 362 Comm: ip Not tainted 6.12.0-rc3-custom-gd95d9a31aceb #139
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl+0xba/0x110
lockdep_rcu_suspicious.cold+0x4f/0xd6
ip_tunnel_find+0x435/0x4d0
ip_tunnel_newlink+0x517/0x7a0
ipgre_newlink+0x14c/0x170
__rtnl_newlink+0x1173/0x19c0
rtnl_newlink+0x6c/0xa0
rtnetlink_rcv_msg+0x3cc/0xf60
netlink_rcv_skb+0x171/0x450
netlink_unicast+0x539/0x7f0
netlink_sendmsg+0x8c1/0xd80
____sys_sendmsg+0x8f9/0xc20
___sys_sendmsg+0x197/0x1e0
__sys_sendmsg+0x122/0x1f0
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
spi: mpc52xx: Add cancel_work_sync before module remove
If we remove the module which will call mpc52xx_spi_remove
it will free 'ms' through spi_unregister_controller.
while the work ms->work will be used. The sequence of operations
that may lead to a UAF bug.
Fix it by ensuring that the work is canceled before proceeding with
the cleanup in mpc52xx_spi_remove. |
| REXML is an XML toolkit for Ruby. The REXML gem before 3.3.9 has a ReDoS vulnerability when it parses an XML that has many digits between &# and x...; in a hex numeric character reference (&#x...;). This does not happen with Ruby 3.2 or later. Ruby 3.1 is the only affected maintained Ruby. The REXML gem 3.3.9 or later include the patch to fix the vulnerability. |
| DOMPurify is a DOM-only, super-fast, uber-tolerant XSS sanitizer for HTML, MathML and SVG. DOMPurify was vulnerable to prototype pollution. This vulnerability is fixed in 2.4.2. |
| In the Linux kernel, the following vulnerability has been resolved:
bcache: revert replacing IS_ERR_OR_NULL with IS_ERR again
Commit 028ddcac477b ("bcache: Remove unnecessary NULL point check in
node allocations") leads a NULL pointer deference in cache_set_flush().
1721 if (!IS_ERR_OR_NULL(c->root))
1722 list_add(&c->root->list, &c->btree_cache);
>From the above code in cache_set_flush(), if previous registration code
fails before allocating c->root, it is possible c->root is NULL as what
it is initialized. __bch_btree_node_alloc() never returns NULL but
c->root is possible to be NULL at above line 1721.
This patch replaces IS_ERR() by IS_ERR_OR_NULL() to fix this. |
| An improper array index validation vulnerability exists in the nowindow functionality of OFFIS DCMTK 3.6.8. A specially crafted DICOM file can lead to an out-of-bounds write. An attacker can provide a malicious file to trigger this vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: don't access invalid sched
Since 2320c9e6a768 ("drm/sched: memset() 'job' in drm_sched_job_init()")
accessing job->base.sched can produce unexpected results as the initialisation
of (*job)->base.sched done in amdgpu_job_alloc is overwritten by the
memset.
This commit fixes an issue when a CS would fail validation and would
be rejected after job->num_ibs is incremented. In this case,
amdgpu_ib_free(ring->adev, ...) will be called, which would crash the
machine because the ring value is bogus.
To fix this, pass a NULL pointer to amdgpu_ib_free(): we can do this
because the device is actually not used in this function.
The next commit will remove the ring argument completely.
(cherry picked from commit 2ae520cb12831d264ceb97c61f72c59d33c0dbd7) |
| Squid is an open source caching proxy for the Web supporting HTTP, HTTPS, FTP, and more. Due to Input Validation, Premature Release of Resource During Expected Lifetime, and Missing Release of Resource after Effective Lifetime bugs, Squid is vulnerable to Denial of Service attacks by a trusted server against all clients using the proxy. This bug is fixed in the default build configuration of Squid version 6.10. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: Use i3cdev->desc->info instead of calling i3c_device_get_info() to avoid deadlock
A deadlock may happen since the i3c_master_register() acquires
&i3cbus->lock twice. See the log below.
Use i3cdev->desc->info instead of calling i3c_device_info() to
avoid acquiring the lock twice.
v2:
- Modified the title and commit message
============================================
WARNING: possible recursive locking detected
6.11.0-mainline
--------------------------------------------
init/1 is trying to acquire lock:
f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_bus_normaluse_lock
but task is already holding lock:
f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_master_register
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&i3cbus->lock);
lock(&i3cbus->lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
2 locks held by init/1:
#0: fcffff809b6798f8 (&dev->mutex){....}-{3:3}, at: __driver_attach
#1: f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_master_register
stack backtrace:
CPU: 6 UID: 0 PID: 1 Comm: init
Call trace:
dump_backtrace+0xfc/0x17c
show_stack+0x18/0x28
dump_stack_lvl+0x40/0xc0
dump_stack+0x18/0x24
print_deadlock_bug+0x388/0x390
__lock_acquire+0x18bc/0x32ec
lock_acquire+0x134/0x2b0
down_read+0x50/0x19c
i3c_bus_normaluse_lock+0x14/0x24
i3c_device_get_info+0x24/0x58
i3c_device_uevent+0x34/0xa4
dev_uevent+0x310/0x384
kobject_uevent_env+0x244/0x414
kobject_uevent+0x14/0x20
device_add+0x278/0x460
device_register+0x20/0x34
i3c_master_register_new_i3c_devs+0x78/0x154
i3c_master_register+0x6a0/0x6d4
mtk_i3c_master_probe+0x3b8/0x4d8
platform_probe+0xa0/0xe0
really_probe+0x114/0x454
__driver_probe_device+0xa0/0x15c
driver_probe_device+0x3c/0x1ac
__driver_attach+0xc4/0x1f0
bus_for_each_dev+0x104/0x160
driver_attach+0x24/0x34
bus_add_driver+0x14c/0x294
driver_register+0x68/0x104
__platform_driver_register+0x20/0x30
init_module+0x20/0xfe4
do_one_initcall+0x184/0x464
do_init_module+0x58/0x1ec
load_module+0xefc/0x10c8
__arm64_sys_finit_module+0x238/0x33c
invoke_syscall+0x58/0x10c
el0_svc_common+0xa8/0xdc
do_el0_svc+0x1c/0x28
el0_svc+0x50/0xac
el0t_64_sync_handler+0x70/0xbc
el0t_64_sync+0x1a8/0x1ac |
| In Eclipse Mosquito, versions from 2.0.0 through 2.0.18, if a Mosquitto broker is configured to create an outgoing bridge connection, and that bridge connection has an incoming topic configured that makes use of topic remapping, then if the remote connection sends a crafted PUBLISH packet to the broker a double free will occur with a subsequent crash of the broker. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. FreeRDP based clients prior to version 3.5.1 are vulnerable to a possible `NULL` access and crash. Version 3.5.1 contains a patch for the issue. No known workarounds are available. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.5.1, a malicious server can crash the FreeRDP client by sending invalid huge allocation size. Version 3.5.1 contains a patch for the issue. No known workarounds are available. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. FreeRDP based clients prior to version 3.5.1 are vulnerable to out-of-bounds read if `((nWidth == 0) and (nHeight == 0))`. Version 3.5.1 contains a patch for the issue. No known workarounds are available. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. FreeRDP based clients prior to version 3.5.1 are vulnerable to out-of-bounds read. Version 3.5.1 contains a patch for the issue. No known workarounds are available. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. FreeRDP based based clients using `/bpp:32` legacy `GDI` drawing path with a version of FreeRDP prior to 3.5.0 or 2.11.6 are vulnerable to out-of-bounds read. Versions 3.5.0 and 2.11.6 patch the issue. As a workaround, use modern drawing paths (e.g. `/rfx` or `/gfx` options). The workaround requires server side support. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. FreeRDP based clients and servers that use a version of FreeRDP prior to 3.5.0 or 2.11.6 are vulnerable to out-of-bounds read. Versions 3.5.0 and 2.11.6 patch the issue. No known workarounds are available. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. FreeRDP based clients that use a version of FreeRDP prior to 3.5.0 or 2.11.6 are vulnerable to out-of-bounds read. Versions 3.5.0 and 2.11.6 patch the issue. As a workaround, use `/gfx` or `/rfx` modes (on by default, require server side support). |
| FreeRDP is a free implementation of the Remote Desktop Protocol. FreeRDP based clients that use a version of FreeRDP prior to 3.5.0 or 2.11.6 and have connections to servers using the `NSC` codec are vulnerable to integer underflow. Versions 3.5.0 and 2.11.6 patch the issue. As a workaround, do not use the NSC codec (e.g. use `-nsc`). |
| FreeRDP is a free implementation of the Remote Desktop Protocol. FreeRDP based clients using a version of FreeRDP prior to 3.5.0 or 2.11.6 are vulnerable to integer overflow and out-of-bounds write. Versions 3.5.0 and 2.11.6 patch the issue. As a workaround, do not use `/gfx` options (e.g. deactivate with `/bpp:32` or `/rfx` as it is on by default). |
