Search Results (55957 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-99708 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: ipv6: reject wrapped temporary address preferred lifetimes ipv6_create_tempaddr() raises a temporary address's preferred lifetime to regen_advance + age + 1 when the configured lifetime is too short. The result is stored in a u32, while regen_advance and age are unsigned long. If the sum wraps or is truncated, the stored lifetime can still be less than or equal to regen_advance + age. addrconf_verify_rtnl() then sees the new address as due for regeneration and creates another one. Temporary addresses are not limited by max_addresses since commit 4b08a8f1bd8c ("ipv6: remove max_addresses check from ipv6_create_tempaddr"), so this can cause unbounded address growth. With dad_transmits set to -1, a baseline kernel reached 2859 loopback addresses in two seconds. After storing the adjusted lifetime, verify that it is still greater than regen_advance + age. Reject the new address if the check fails. On an x86-64 KASAN kernel, the normal configuration created three IPv6 addresses. The negative dad_transmits, positive multiplication overflow, and large retransmission-time cases each left only the loopback and public addresses. An i386 defconfig and an x86-64 allmodconfig both built addrconf.o with W=1.
CVE-2026-99709 1 Linux 2 Linux, Linux Kernel 2026-11-20 7.8 High
In the Linux kernel, the following vulnerability has been resolved: inet: frags: limit the truesize of a reassembly queue The truesize of fragments in a reassembly queue is only bounded by the per netns ipfrag_high_thresh sysctl, which has no upper limit. inet_frag_reasm_finish() sums the truesize of all fragments in an int. If this sum reaches 2^32, it wraps, and the final sk_wmem_alloc adjustment of the socket owning the reassembled skb can cancel its own reference, leading to a use-after-free of this socket. This can be triggered from an unprivileged user/network namespace, raising ipfrag_high_thresh and using padded TUN packets, which keep a large truesize after being trimmed by ip_rcv_core(). Track the sum of the truesize of fragments in each queue, and refuse a fragment that would make it bigger than INT_MAX / 2. Callers kill the queue on this error. This bound is far above the needs of legitimate traffic.
CVE-2026-105802 1 Git-lfs 1 Git-lfs 2026-11-20 N/A
Git LFS is a Git extension for versioning large files. From 0.6.0 until 3.8.1, Git LFS reads Git configuration options defined for a submodule without checking certain values for embedded line-ending control characters. A malicious repository can insert control characters such as line feed (LF) into those values to mimic options that cause Git LFS to execute an attacker-controlled command or binary while fetching or adding objects. This issue is fixed in version 3.8.1.
CVE-2026-129229 1 Nltk 1 Nltk 2026-11-20 7.5 High
NLTK (Natural Language Toolkit) is a suite of open source Python modules, data sets, and tutorials supporting research and development in Natural Language Processing. From 3.10.0 until 3.10.4, TokenSearcher.findall and Text.findall accept caller-controlled regular expressions with an unbounded number of capturing groups throughout the affected range. Starting in 3.10.3, nltk.redos.compile and RegexpTokenizer expose the same compile-time vector. The third-party regex engine compiles group-dense patterns with roughly quadratic cost before the match-time timeout begins, allowing a small unauthenticated request to exhaust CPU and deny service. This issue is fixed in version 3.10.4.
CVE-2026-131180 1 Splunk 1 Splunk Enterprise 2026-11-20 6.3 Medium
In Splunk Enterprise versions below 10.4.5, 10.2.9, 10.0.12, and 9.4.17, a user who holds the "power" Splunk role could create and share a dashboard that contains attacker-controlled Search Processing Language (SPL). The SPL could run using the permissions of the user who opens the dashboard. With this access, the user who created the dashboard could expose stored credentials and write data to an index. The vulnerability is possible because Splunk Enterprise does not correctly escape field names in searches that use the rename command. For more information see rename (https://help.splunk.com/en/splunk-enterprise/spl-search-reference/10.4/search-commands/rename) and SPL safeguards for risky commands (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.4/best-practices-for-splunk-platform-security/spl-safeguards-for-risky-commands) in the Splunk documentation.
CVE-2026-131182 1 Splunk 1 Splunk Enterprise 2026-11-20 7.6 High
In Splunk Enterprise versions below 10.4.5, 10.2.9, 10.0.12, and 9.4.17, a user who holds the "power" Splunk role could store malicious Search Processing Language (SPL) in a shared dashboard. The malicious SPL could run using the permissions of the user who opened the dashboard and could access or modify data available to that user and disrupt Splunk Enterprise availability. The vulnerability is possible because Splunk Enterprise does not preserve quoted search argument boundaries when it processes a dashboard search. The vulnerability requires the attacker to phish the affected user by tricking them into initiating a request within their browser. The attacker, a user who holds the "power" Splunk role, should not be able to exploit the vulnerability at will.
CVE-2026-131183 1 Splunk 1 Splunk Enterprise 2026-11-20 5.4 Medium
In Splunk Enterprise versions below 10.4.5, 10.2.9, 10.0.12, and 9.4.17, a low-privileged user who holds the "power" Splunk role could inject arbitrary Search Processing Language (SPL) commands into a Classic Dashboard search. When another user opens the affected dashboard in Splunk Web, those injected commands execute with the viewing user's permissions, potentially allowing the low-privileged user to access stored credentials and write data to indexes. The vulnerability is possible because Splunk Enterprise does not correctly escape user-supplied content when it rewrites a search, which lets the rewritten search include additional SPL commands. The vulnerability requires another user to open the dashboard in Splunk Web. Consequently, a user who holds the "power" Splunk role should not be able to exploit the vulnerability at will. For more information see SPL safeguards for risky commands (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.6/best-practices-for-splunk-platform-security/spl-safeguards-for-risky-commands) and Define roles on the Splunk platform with capabilities (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.6/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities) in the Splunk documentation.
CVE-2026-131189 1 Splunk 1 Splunk Enterprise 2026-11-20 5.3 Medium
In Splunk Enterprise versions below 10.4.5, 10.2.9, 10.0.12, and 9.4.17, an unauthenticated user could inject arbitrary fields into Splunk Enterprise audit records via the Representational State Transfer (REST) API. Successful exploitation could allow the unauthenticated user to forge audit evidence, compromising the integrity of audit reviews and security detections that rely on legacy audit-field parsing. The vulnerability exists because Splunk Enterprise does not neutralize field delimiters in user-supplied data before writing the data to a legacy audit record. The affected workflow also does not create a corresponding structured audit record. For more information see Auditing activities in a Splunk platform instance (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.0/audit-activity-in-splunk-enterprise/auditing-activities-in-a-splunk-platform-instance) and About structured audit trail logs (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.2/audit-activity-in-splunk-enterprise/about-structured-audit-trail-logs) in the Splunk documentation.
CVE-2026-131213 1 Splunk 1 Enterprise Security 2026-11-20 6.7 Medium
In Splunk Enterprise Security versions below 8.7.0, a user who holds the "ess_analyst" Splunk Enterprise Security role could store attacker-controlled data in finding exclusion rule metadata. Another authenticated user could later open the Finding Exclusion Rules page. Splunk Enterprise Security could then run attacker-controlled Search Processing Language (SPL) commands using the permissions of the user who opened the page. The first user could access data and perform actions available to the later user. The vulnerability is possible because Splunk Enterprise Security does not escape backslashes in finding exclusion rule metadata before adding the values to a page search. For more information see Finding exclusions in Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-8/administer/8.7/user-and-entity-behavior-analytics/finding-exclusions-in-splunk-enterprise-security) and Users and roles for Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-8/install/8.7/installation/users-and-roles-for-splunk-enterprise-security) in the Splunk documentation.
CVE-2026-131233 1 Splunk 1 Enterprise Security 2026-11-20 5.4 Medium
In Splunk Enterprise Security versions below 8.7.0, a user that holds a role with the run_collect capability could store attacker-controlled values in endpoint summary data. If another user who can access the Time Center dashboard selects an affected row, Splunk Enterprise Security could run attacker-controlled Search Processing Language (SPL) commands using the permissions of the user who selects the row. The user who stores the values could then access sensitive data and modify some data available to the user who selects the row. The vulnerability is possible because the Time Center dashboard does not safely escape endpoint summary values before inserting them into drilldown searches. For more information see Define roles on the Splunk platform with capabilities (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.4/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities) and Endpoint dashboards (https://help.splunk.com/en/splunk-enterprise-security-8/user-guide/8.7/analytics/endpoint-dashboards) in the Splunk documentation.
CVE-2026-99675 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.3 Medium
In the Linux kernel, the following vulnerability has been resolved: nvmet: reject keep-alive timeouts that would overflow nvmet_set_feat_kato() and nvmet_alloc_ctrl() convert the 32-bit millisecond KATO from the host to seconds with DIV_ROUND_UP(kato, 1000). The addition in DIV_ROUND_UP() is done in 32 bits, so any KATO above 4294966296 ms wraps around and rounds to 0 seconds. A Set Features command with KATO 0xffffffff then succeeds but disables the keep-alive timer: Get Features returns 0 and Keep Alive fails with Keep Alive Timeout Invalid. A Connect command with such a KATO creates a controller without a keep-alive timer. The converted value has more consumers that can overflow. Get Features multiplies it by 1000, and the timer paths multiply it by HZ in 32 bits and arm a delay that must not exceed MAX_JIFFY_OFFSET. Reject a KATO whose rounded value does not fit all of these. Return Keep Alive Timeout Invalid from both Set Features and Connect. Validate Set Features before stopping the current timer so a failed update leaves its timeout unchanged. Round in 64 bits. A KATO of 0 keeps its current meaning.
CVE-2026-99678 1 Linux 2 Linux, Linux Kernel 2026-11-20 6.5 Medium
In the Linux kernel, the following vulnerability has been resolved: xfs: cap the block count of xfs_iomap_write_direct() at one extent xfs_iomap_write_direct() reserves blocks for the whole count in an unsigned int. For a pNFS layout the client chooses that count, and an RW LAYOUTGET for 16 TiB wraps the reservation and shuts XFS down. xfs_bmapi_write() maps at most XFS_MAX_BMBT_EXTLEN blocks here, so cap the count at that. nfsd asks again for the rest. The other callers get the same mapping as before.
CVE-2026-130151 1 Okta 1 Okta Privileged Access Gateway 2026-11-20 8.5 High
Okta Privileged Access (OPA) Gateway includes a version of the FreeRDP library affected by memory management issues in its smartcard redirection handling. When an RDP session is established meeting specific session criteria, command execution within the context of the local Gateway service account may be allowed.
CVE-2026-130234 1 Okta 1 Okta Swift Management Sdk 2026-11-20 8 High
The Okta Swift Management SDK does not percent-encode forward slash (/) characters during path parameter interpolation. If an application supplies input containing relative path sequences (e.g., ../) to an SDK method, standard URL normalization may direct the outbound request to an alternative Okta Management API endpoint.
CVE-2026-102945 1 Omec-project 1 Amf 2026-11-20 4.9 Medium
Aether Project AMF supports termination of NAS signalling, NAS ciphering & integrity protection, registration management, connection management, mobility management, access authentication and authorization, security context management. Prior to 3.1.6, a malformed NGAP PathSwitchRequest can contain a UESecurityCapabilities information element whose extensible APER bit-string representation has no bytes even though decoding reports no error. In ngap/handler.go, HandlePathSwitchRequest checks only whether the element is present before six index-zero reads of its encryption and integrity algorithm fields, causing an unrecovered panic in the NGAP receive goroutine and terminating the AMF. The described attacker is a rogue or compromised gNB on the N2 interface and additionally needs a registered UE's AMF-UE-NGAP-ID; a bare over-the-air UE cannot trigger the issue. This issue is fixed in version 3.1.6.
CVE-2026-119528 2 Red Hat, Redhat 4 Enterprise Linux, Enterprise Linux, Rhel Els and 1 more 2026-11-20 7.8 High
A flaw was found in GIMP. The PSD plug-in’s image resource header loader uses an incorrect destination size when copying a converted resource name into a fixed stack buffer. Opening a crafted PSD file can cause a stack-based buffer overflow, leading to a crash and potentially arbitrary code execution.
CVE-2026-127057 2026-11-20 N/A
The Danfoss legacy AK-SC 355 and AK-SM 800 Series are vulnerable to unauthorized access when default credentials or known passwords are used for authentication. These products were manufactured with default credentials documented in the product manual. All versions are affected.
CVE-2026-129713 2026-11-20 N/A
A stack-based buffer overflow in an unauthenticated CGI handler of the Danfoss AK-SM 8xxA Series controller allows remote attackers to send specially crafted HTTP/S POST requests, leading to memory corruption, webserver restart and hypothetically potential arbitrary code execution with webserver privileges. Authentication is not required to exploit this vulnerability.
CVE-2026-53526 1 Dzikoysk 1 Reposilite 2026-11-20 5.7 Medium
Reposilite is lightweight and easy-to-use repository management software dedicated to Maven-based artifacts in the JVM ecosystem. From 3.5.16 until 3.6.0, as stated by the advisory, the Maven directory-index page interpolates the request URI without HTML escaping in its title, heading, base URL, and parent-directory link. The advisory says the content-embedded ctx.uri() is percent-encoded, preventing tag injection, but that a single quote passes through and breaks the quoted Parent-Directory link; it also says Location.of strips single quotes, so the reachability of the described quote-based trigger remains unresolved. The listing shares the Admin UI origin and does not set the sandbox Content-Security-Policy used for artifact and Javadoc responses, so the reported script execution could access a user's local-storage token. A manager token could enable full instance compromise. The advisory reports version 3.6.0 as fixed.
CVE-2026-61799 1 Netty 1 Netty-incubator-codec-ohttp 2026-11-20 5.3 Medium
netty-incubator-codec-ohttp implements Oblivious HTTP (OHTTP) gateway and client functionality using Netty. Prior to 0.0.23.Final, BinaryHttpParser in codec-bhttp/src/main/java/io/netty/incubator/codec/bhttp/BinaryHttpParser.java accumulates attacker-controlled Binary HTTP variable-length integers into the int offset sumBytes. BinaryHttpParser.readRequestHead, BinaryHttpParser.readFieldLine, and BinaryHttpParser.getIndeterminateLength can narrow long lengths into that offset, causing integer wraparound before buffer indices are calculated. A remote peer that supplies a valid large encoded length to BinaryHttpParser or BinaryHttpDecoder can trigger an unchecked bounds exception from a small malformed message, fail or close the channel, and repeatedly cause denial of service. Java and Netty bounds checks prevent memory corruption, and no information disclosure was observed. This issue is fixed in version 0.0.23.Final.