| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the web-based management interface of Cisco IMC could allow an authenticated, remote attacker with Admin privileges to execute arbitrary commands on the underlying operating system of an affected system and elevate privileges to root.
This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by entering crafted inputs to the web-based management interface of the affected software. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system as the root user.
Cisco has assigned this vulnerability a SIR of High rather than Medium as the score indicates because additional security implications could occur when the attacker becomes root. |
| EasyAdmin is a fast and modern admin generator for Symfony applications. From 4.0.0 until 4.29.16 and 5.5.1, EasyAdmin serves all backend requests through a single dashboard route and, for custom actions (Action::linkToRoute() and MenuItem::linkToRoute()), swaps the executed controller based on the routeName query parameter on the kernel.controller event. The swap happens after Symfony's security firewall has already evaluated access_control against the original dashboard URL, and the routeName value was not validated. As a result, a path-based access_control rule protecting the target route was never evaluated, so a low-privilege backend user who can reach a single EasyAdmin URL and knows a target route's name can execute that route's controller, bypassing the path-based rule. Only path-based protections are bypassed. Routes whose controller enforces its own authorization with #[IsGranted] or denyAccessUnlessGranted() remain protected because those checks are recomputed against the swapped-in controller. This issue is fixed in versions 4.29.16 and 5.5.1. |
| A vulnerability in the web-based management interface of Cisco IMC could allow an authenticated, remote attacker with low privileges to execute arbitrary commands on the underlying operating system of an affected system and elevate privileges to root.
This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by entering crafted inputs to the web-based management interface of the affected software. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system as the root user. |
| A potential security vulnerability has been identified in the HP ImageDiags for versions prior to 5.0.0.36. The vulnerability could potentially allow a local attacker to escalate privileges due to insufficient access controls. |
| elFinder is an open-source file manager for web, written in JavaScript using jQuery UI. Prior to 2.1.70, checkExtractItems() in php/elFinderVolumeDriver.class.php calls mimetypeInternalDetect() without passing the result through mimeTypeNormalize(). Because the .phtml, .phar, .php5, and .php3 extensions are absent from mime.types, the staticMimeMap entries that map them to text/x-php are not applied, and allowPutMime() permits extraction even when uploadDeny blocks text/x-php. An attacker with ZIP upload permission can extract PHP-executable files into a web-accessible files/ directory and achieve remote code execution when the server executes those extensions. This issue is fixed in version 2.1.70. |
| Unauthenticated Cross Site Scripting (XSS) in Tailored Tools <= 3.0.2 versions. |
| Unauthenticated Cross Site Scripting (XSS) in Email Essentials <= 6.0.6 versions. |
| Unauthenticated SQL Injection in Throws SPAM Away <= 3.8.2 versions. |
| Subscriber Broken Access Control in Booking and Rental Manager <= 2.7.6 versions. |
| Subscriber Broken Access Control in OwnerRez API <= 1.2.6 versions. |
| Unauthenticated SQL Injection in Smart Marketing SMS and Newsletters Forms <= 5.1.24 versions. |
| Unauthenticated Cross Site Scripting (XSS) in LeadConnector <= 4.0.5 versions. |
| Subscriber Sensitive Data Exposure in Print Barcode Labels for your WooCommerce products/orders <= 4.0.0 versions. |
| A vulnerability was determined in QuantumNous new-api up to 1.0.0-rc.15. Affected by this issue is some unknown functionality of the file /api/usage/token/ of the component Revoked API Token Handler. Executing a manipulation can lead to session expiration. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. Upgrading to version 1.0.0-rc.17 can resolve this issue. This patch is called 0d5995eb63f8801d32eb32fbe74b75b68752bfa9. The affected component should be upgraded. |
| Incorrect access control in the setLedCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to modify LED behavior via sending a crafted POST request to /cgi-bin/cstecgi.cgi. |
| Incorrect access control in the delWiFiScheduleCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to remove Wi-Fi schedule entries via sending a crafted POST request to /cgi-bin/cstecgi.cgi. |
| Incorrect access control in the informSlaveUpdate function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to trigger mesh slave update coordination via sending a crafted POST request to /cgi-bin/cstecgi.cgi. |
| Incorrect access control in the clearSyslog function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to erase system logs via sending a crafted POST request to /cgi-bin/cstecgi.cgi. |
| The LwM2M JSON content formatter's get_string() in subsys/net/lib/lwm2m/lwm2m_rw_json.c copies a parsed JSON string into a caller-supplied buffer and NUL-terminates it. The length guard used if (string_length > buflen), which accepts a string whose length is exactly buflen. After memcpy() fills the whole buffer, buf[string_length] = '\0' then writes one byte past the end of the buffer (CWE-787).
The string value and its length are taken directly from the incoming CoAP payload during a LwM2M WRITE: do_write_op_json() parses the payload obtained from coap_packet_get_payload(), and get_string() is invoked from lwm2m_write_handler() (engine_get_string() in subsys/net/lib/lwm2m/lwm2m_message_handling.c) for a LWM2M_RES_TYPE_STRING resource. The destination buf/buflen is either the resource instance's fixed data buffer (res_inst->data_ptr/max_data_len) or the engine validation buffer (msg->ctx->validate_buf). A LwM2M server (the client's DTLS peer) can therefore write a string resource with a value whose length equals the target buffer size and force a one-byte overflow.
The overflow is a single out-of-bounds write of the constant byte 0x00 immediately past the resource or validation buffer, corrupting the adjacent byte in memory. It is not an information leak and the written value is fixed, so it is not a direct code-execution primitive, but it can corrupt adjacent state (an adjacent resource value, a length/flag field, or a struct field) and cause data corruption or a crash. Triggering the write is deterministic; the resulting impact depends on memory layout.
The fix changes the guard to string_length >= buflen, rejecting the exact-length case and aligning the JSON formatter with the other content formatters (lwm2m_rw_plain_text.c, lwm2m_rw_oma_tlv.c, lwm2m_rw_senml_json.c, lwm2m_rw_cbor.c, lwm2m_rw_senml_cbor.c), which already used the correct boundary check. |
| When Ethernet bridging is enabled (CONFIG_NET_ETHERNET_BRIDGE), eth_bridge_input_process() in subsys/net/l2/ethernet/bridge/bridge_input.c decides how each frame received on a bridge member interface is handled. For frames that must also be delivered to the local stack, the code called eth_bridge_handle_locally() and returned NET_OK. That helper does not consume the packet — it only calls bridge_iface_recv() (via virtual_recv()), which returns NET_CONTINUE without taking ownership of pkt.
The NET_OK verdict then propagates through ethernet_recv() up to processing_data() in subsys/net/ip/net_core.c, where NET_OK is interpreted as "the packet was consumed, do not free it." Because no consumer actually took ownership, the RX net_pkt is never returned to the pool and is leaked. The concretely reproducible leak occurs for frames whose EtherType has no registered L3 handler when CONFIG_NET_ETHERNET_FORWARD_UNRECOGNISED_ETHERTYPE is set (default y when CONFIG_NET_SOCKETS_PACKET is enabled): the fall-through L3 dispatch does not overwrite the NET_OK verdict, so ethernet_recv() returns NET_OK and the buffer is never released.
Any device on a bridged L2 segment can emit broadcast/multicast frames carrying an arbitrary EtherType with no authentication. Each such frame permanently consumes one buffer from the finite RX pool (CONFIG_NET_PKT_RX_COUNT), so a brief broadcast flood exhausts the pool and the device can no longer receive traffic until it is rebooted — a persistent denial of service. There is no confidentiality or integrity impact.
The fix makes eth_bridge_handle_locally() propagate the real net_verdict and return NET_CONTINUE for locally-kept frames, writing the bridge interface back through a new dst_iface out-parameter so the packet follows the normal receive path and is unreferenced exactly once. |
