| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Check for hdwq null ptr when cleaning up lpfc_vport structure
If a call to lpfc_sli4_read_rev() from lpfc_sli4_hba_setup() fails, the
resultant cleanup routine lpfc_sli4_vport_delete_fcp_xri_aborted() may
occur before sli4_hba.hdwqs are allocated. This may result in a null
pointer dereference when attempting to take the abts_io_buf_list_lock for
the first hardware queue. Fix by adding a null ptr check on
phba->sli4_hba.hdwq and early return because this situation means there
must have been an error during port initialization. |
| In the Linux kernel, the following vulnerability has been resolved:
media: dvb-frontends: dib7090p: fix null-ptr-deref in dib7090p_rw_on_apb()
In dib7090p_rw_on_apb, msg is controlled by user. When msg[0].buf is null and
msg[0].len is zero, former checks on msg[0].buf would be passed. If accessing
msg[0].buf[2] without sanity check, null pointer deref would happen. We add
check on msg[0].len to prevent crash. Similar issue occurs when access
msg[1].buf[0] and msg[1].buf[1].
Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") |
| In the Linux kernel, the following vulnerability has been resolved:
media: dvb-frontends: w7090p: fix null-ptr-deref in w7090p_tuner_write_serpar and w7090p_tuner_read_serpar
In w7090p_tuner_write_serpar, msg is controlled by user. When msg[0].buf is null and msg[0].len is zero, former checks on msg[0].buf would be passed. If accessing msg[0].buf[2] without sanity check, null pointer deref would happen. We add
check on msg[0].len to prevent crash.
Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: add cluster chain loop check for dir
An infinite loop may occur if the following conditions occur due to
file system corruption.
(1) Condition for exfat_count_dir_entries() to loop infinitely.
- The cluster chain includes a loop.
- There is no UNUSED entry in the cluster chain.
(2) Condition for exfat_create_upcase_table() to loop infinitely.
- The cluster chain of the root directory includes a loop.
- There are no UNUSED entry and up-case table entry in the cluster
chain of the root directory.
(3) Condition for exfat_load_bitmap() to loop infinitely.
- The cluster chain of the root directory includes a loop.
- There are no UNUSED entry and bitmap entry in the cluster chain
of the root directory.
(4) Condition for exfat_find_dir_entry() to loop infinitely.
- The cluster chain includes a loop.
- The unused directory entries were exhausted by some operation.
(5) Condition for exfat_check_dir_empty() to loop infinitely.
- The cluster chain includes a loop.
- The unused directory entries were exhausted by some operation.
- All files and sub-directories under the directory are deleted.
This commit adds checks to break the above infinite loop. |
| In the Linux kernel, the following vulnerability has been resolved:
pNFS: Fix uninited ptr deref in block/scsi layout
The error occurs on the third attempt to encode extents. When function
ext_tree_prepare_commit() reallocates a larger buffer to retry encoding
extents, the "layoutupdate_pages" page array is initialized only after the
retry loop. But ext_tree_free_commitdata() is called on every iteration
and tries to put pages in the array, thus dereferencing uninitialized
pointers.
An additional problem is that there is no limit on the maximum possible
buffer_size. When there are too many extents, the client may create a
layoutcommit that is larger than the maximum possible RPC size accepted
by the server.
During testing, we observed two typical scenarios. First, one memory page
for extents is enough when we work with small files, append data to the
end of the file, or preallocate extents before writing. But when we fill
a new large file without preallocating, the number of extents can be huge,
and counting the number of written extents in ext_tree_encode_commit()
does not help much. Since this number increases even more between
unlocking and locking of ext_tree, the reallocated buffer may not be
large enough again and again. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: ets: use old 'nbands' while purging unused classes
Shuang reported sch_ets test-case [1] crashing in ets_class_qlen_notify()
after recent changes from Lion [2]. The problem is: in ets_qdisc_change()
we purge unused DWRR queues; the value of 'q->nbands' is the new one, and
the cleanup should be done with the old one. The problem is here since my
first attempts to fix ets_qdisc_change(), but it surfaced again after the
recent qdisc len accounting fixes. Fix it purging idle DWRR queues before
assigning a new value of 'q->nbands', so that all purge operations find a
consistent configuration:
- old 'q->nbands' because it's needed by ets_class_find()
- old 'q->nstrict' because it's needed by ets_class_is_strict()
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 62 UID: 0 PID: 39457 Comm: tc Kdump: loaded Not tainted 6.12.0-116.el10.x86_64 #1 PREEMPT(voluntary)
Hardware name: Dell Inc. PowerEdge R640/06DKY5, BIOS 2.12.2 07/09/2021
RIP: 0010:__list_del_entry_valid_or_report+0x4/0x80
Code: ff 4c 39 c7 0f 84 39 19 8e ff b8 01 00 00 00 c3 cc cc cc cc 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa <48> 8b 17 48 8b 4f 08 48 85 d2 0f 84 56 19 8e ff 48 85 c9 0f 84 ab
RSP: 0018:ffffba186009f400 EFLAGS: 00010202
RAX: 00000000000000d6 RBX: 0000000000000000 RCX: 0000000000000004
RDX: ffff9f0fa29b69c0 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffffffc12c2400 R08: 0000000000000008 R09: 0000000000000004
R10: ffffffffffffffff R11: 0000000000000004 R12: 0000000000000000
R13: ffff9f0f8cfe0000 R14: 0000000000100005 R15: 0000000000000000
FS: 00007f2154f37480(0000) GS:ffff9f269c1c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000001530be001 CR4: 00000000007726f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
ets_class_qlen_notify+0x65/0x90 [sch_ets]
qdisc_tree_reduce_backlog+0x74/0x110
ets_qdisc_change+0x630/0xa40 [sch_ets]
__tc_modify_qdisc.constprop.0+0x216/0x7f0
tc_modify_qdisc+0x7c/0x120
rtnetlink_rcv_msg+0x145/0x3f0
netlink_rcv_skb+0x53/0x100
netlink_unicast+0x245/0x390
netlink_sendmsg+0x21b/0x470
____sys_sendmsg+0x39d/0x3d0
___sys_sendmsg+0x9a/0xe0
__sys_sendmsg+0x7a/0xd0
do_syscall_64+0x7d/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f2155114084
Code: 89 02 b8 ff ff ff ff eb bb 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 80 3d 25 f0 0c 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89
RSP: 002b:00007fff1fd7a988 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000560ec063e5e0 RCX: 00007f2155114084
RDX: 0000000000000000 RSI: 00007fff1fd7a9f0 RDI: 0000000000000003
RBP: 00007fff1fd7aa60 R08: 0000000000000010 R09: 000000000000003f
R10: 0000560ee9b3a010 R11: 0000000000000202 R12: 00007fff1fd7aae0
R13: 000000006891ccde R14: 0000560ec063e5e0 R15: 00007fff1fd7aad0
</TASK>
[1] https://lore.kernel.org/netdev/e08c7f4a6882f260011909a868311c6e9b54f3e4.1639153474.git.dcaratti@redhat.com/
[2] https://lore.kernel.org/netdev/d912cbd7-193b-4269-9857-525bee8bbb6a@gmail.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
hv_netvsc: Fix panic during namespace deletion with VF
The existing code move the VF NIC to new namespace when NETDEV_REGISTER is
received on netvsc NIC. During deletion of the namespace,
default_device_exit_batch() >> default_device_exit_net() is called. When
netvsc NIC is moved back and registered to the default namespace, it
automatically brings VF NIC back to the default namespace. This will cause
the default_device_exit_net() >> for_each_netdev_safe loop unable to detect
the list end, and hit NULL ptr:
[ 231.449420] mana 7870:00:00.0 enP30832s1: Moved VF to namespace with: eth0
[ 231.449656] BUG: kernel NULL pointer dereference, address: 0000000000000010
[ 231.450246] #PF: supervisor read access in kernel mode
[ 231.450579] #PF: error_code(0x0000) - not-present page
[ 231.450916] PGD 17b8a8067 P4D 0
[ 231.451163] Oops: Oops: 0000 [#1] SMP NOPTI
[ 231.451450] CPU: 82 UID: 0 PID: 1394 Comm: kworker/u768:1 Not tainted 6.16.0-rc4+ #3 VOLUNTARY
[ 231.452042] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/21/2024
[ 231.452692] Workqueue: netns cleanup_net
[ 231.452947] RIP: 0010:default_device_exit_batch+0x16c/0x3f0
[ 231.453326] Code: c0 0c f5 b3 e8 d5 db fe ff 48 85 c0 74 15 48 c7 c2 f8 fd ca b2 be 10 00 00 00 48 8d 7d c0 e8 7b 77 25 00 49 8b 86 28 01 00 00 <48> 8b 50 10 4c 8b 2a 4c 8d 62 f0 49 83 ed 10 4c 39 e0 0f 84 d6 00
[ 231.454294] RSP: 0018:ff75fc7c9bf9fd00 EFLAGS: 00010246
[ 231.454610] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 61c8864680b583eb
[ 231.455094] RDX: ff1fa9f71462d800 RSI: ff75fc7c9bf9fd38 RDI: 0000000030766564
[ 231.455686] RBP: ff75fc7c9bf9fd78 R08: 0000000000000000 R09: 0000000000000000
[ 231.456126] R10: 0000000000000001 R11: 0000000000000004 R12: ff1fa9f70088e340
[ 231.456621] R13: ff1fa9f70088e340 R14: ffffffffb3f50c20 R15: ff1fa9f7103e6340
[ 231.457161] FS: 0000000000000000(0000) GS:ff1faa6783a08000(0000) knlGS:0000000000000000
[ 231.457707] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 231.458031] CR2: 0000000000000010 CR3: 0000000179ab2006 CR4: 0000000000b73ef0
[ 231.458434] Call Trace:
[ 231.458600] <TASK>
[ 231.458777] ops_undo_list+0x100/0x220
[ 231.459015] cleanup_net+0x1b8/0x300
[ 231.459285] process_one_work+0x184/0x340
To fix it, move the ns change to a workqueue, and take rtnl_lock to avoid
changing the netdev list when default_device_exit_net() is using it. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/ptdump: take the memory hotplug lock inside ptdump_walk_pgd()
Memory hot remove unmaps and tears down various kernel page table regions
as required. The ptdump code can race with concurrent modifications of
the kernel page tables. When leaf entries are modified concurrently, the
dump code may log stale or inconsistent information for a VA range, but
this is otherwise not harmful.
But when intermediate levels of kernel page table are freed, the dump code
will continue to use memory that has been freed and potentially
reallocated for another purpose. In such cases, the ptdump code may
dereference bogus addresses, leading to a number of potential problems.
To avoid the above mentioned race condition, platforms such as arm64,
riscv and s390 take memory hotplug lock, while dumping kernel page table
via the sysfs interface /sys/kernel/debug/kernel_page_tables.
Similar race condition exists while checking for pages that might have
been marked W+X via /sys/kernel/debug/kernel_page_tables/check_wx_pages
which in turn calls ptdump_check_wx(). Instead of solving this race
condition again, let's just move the memory hotplug lock inside generic
ptdump_check_wx() which will benefit both the scenarios.
Drop get_online_mems() and put_online_mems() combination from all existing
platform ptdump code paths. |
| In the Linux kernel, the following vulnerability has been resolved:
media: uvcvideo: Fix 1-byte out-of-bounds read in uvc_parse_format()
The buffer length check before calling uvc_parse_format() only ensured
that the buffer has at least 3 bytes (buflen > 2), buf the function
accesses buffer[3], requiring at least 4 bytes.
This can lead to an out-of-bounds read if the buffer has exactly 3 bytes.
Fix it by checking that the buffer has at least 4 bytes in
uvc_parse_format(). |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Avoid stack buffer overflow from kernel cmdline
While the kernel command line is considered trusted in most environments,
avoid writing 1 byte past the end of "acpiid" if the "str" argument is
maximum length. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "drm/prime: Use dma_buf from GEM object instance"
This reverts commit f83a9b8c7fd0557b0c50784bfdc1bbe9140c9bf8.
The dma_buf field in struct drm_gem_object is not stable over the
object instance's lifetime. The field becomes NULL when user space
releases the final GEM handle on the buffer object. This resulted
in a NULL-pointer deref.
Workarounds in commit 5307dce878d4 ("drm/gem: Acquire references on
GEM handles for framebuffers") and commit f6bfc9afc751 ("drm/framebuffer:
Acquire internal references on GEM handles") only solved the problem
partially. They especially don't work for buffer objects without a DRM
framebuffer associated.
Hence, this revert to going back to using .import_attach->dmabuf.
v3:
- cc stable |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "drm/gem-framebuffer: Use dma_buf from GEM object instance"
This reverts commit cce16fcd7446dcff7480cd9d2b6417075ed81065.
The dma_buf field in struct drm_gem_object is not stable over the
object instance's lifetime. The field becomes NULL when user space
releases the final GEM handle on the buffer object. This resulted
in a NULL-pointer deref.
Workarounds in commit 5307dce878d4 ("drm/gem: Acquire references on
GEM handles for framebuffers") and commit f6bfc9afc751 ("drm/framebuffer:
Acquire internal references on GEM handles") only solved the problem
partially. They especially don't work for buffer objects without a DRM
framebuffer associated.
Hence, this revert to going back to using .import_attach->dmabuf.
v3:
- cc stable |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: qup: jump out of the loop in case of timeout
Original logic only sets the return value but doesn't jump out of the
loop if the bus is kept active by a client. This is not expected. A
malicious or buggy i2c client can hang the kernel in this case and
should be avoided. This is observed during a long time test with a
PCA953x GPIO extender.
Fix it by changing the logic to not only sets the return value, but also
jumps out of the loop and return to the caller with -ETIMEDOUT. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "drm/gem-shmem: Use dma_buf from GEM object instance"
This reverts commit 1a148af06000e545e714fe3210af3d77ff903c11.
The dma_buf field in struct drm_gem_object is not stable over the
object instance's lifetime. The field becomes NULL when user space
releases the final GEM handle on the buffer object. This resulted
in a NULL-pointer deref.
Workarounds in commit 5307dce878d4 ("drm/gem: Acquire references on
GEM handles for framebuffers") and commit f6bfc9afc751 ("drm/framebuffer:
Acquire internal references on GEM handles") only solved the problem
partially. They especially don't work for buffer objects without a DRM
framebuffer associated.
Hence, this revert to going back to using .import_attach->dmabuf.
v3:
- cc stable |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: core: fix NULL dereference on unbind due to stale coupling data
Failing to reset coupling_desc.n_coupled after freeing coupled_rdevs can
lead to NULL pointer dereference when regulators are accessed post-unbind.
This can happen during runtime PM or other regulator operations that rely
on coupling metadata.
For example, on ridesx4, unbinding the 'reg-dummy' platform device triggers
a panic in regulator_lock_recursive() due to stale coupling state.
Ensure n_coupled is set to 0 to prevent access to invalid pointers. |
| In the Linux kernel, the following vulnerability has been resolved:
can: netlink: can_changelink(): fix NULL pointer deref of struct can_priv::do_set_mode
Andrei Lalaev reported a NULL pointer deref when a CAN device is
restarted from Bus Off and the driver does not implement the struct
can_priv::do_set_mode callback.
There are 2 code path that call struct can_priv::do_set_mode:
- directly by a manual restart from the user space, via
can_changelink()
- delayed automatic restart after bus off (deactivated by default)
To prevent the NULL pointer deference, refuse a manual restart or
configure the automatic restart delay in can_changelink() and report
the error via extack to user space.
As an additional safety measure let can_restart() return an error if
can_priv::do_set_mode is not set instead of dereferencing it
unchecked. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: Fix a null pointer dereference in ice_copy_and_init_pkg()
Add check for the return value of devm_kmemdup()
to prevent potential null pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: avoid NULL dereference when RX problematic packet on unsupported 6 GHz band
With a quite rare chance, RX report might be problematic to make SW think
a packet is received on 6 GHz band even if the chip does not support 6 GHz
band actually. Since SW won't initialize stuffs for unsupported bands, NULL
dereference will happen then in the sequence, rtw89_vif_rx_stats_iter() ->
rtw89_core_cancel_6ghz_probe_tx(). So, add a check to avoid it.
The following is a crash log for this case.
BUG: kernel NULL pointer dereference, address: 0000000000000032
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 1907 Comm: irq/131-rtw89_p Tainted: G U 6.6.56-05896-g89f5fb0eb30b #1 (HASH:1400 4)
Hardware name: Google Telith/Telith, BIOS Google_Telith.15217.747.0 11/12/2024
RIP: 0010:rtw89_vif_rx_stats_iter+0xd2/0x310 [rtw89_core]
Code: 4c 89 7d c8 48 89 55 c0 49 8d 44 24 02 48 89 45 b8 45 31 ff eb 11
41 c6 45 3a 01 41 b7 01 4d 8b 6d 00 4d 39 f5 74 42 8b 43 10 <41> 33 45
32 0f b7 4b 14 66 41 33 4d 36 0f b7 c9 09 c1 74 d8 4d 85
RSP: 0018:ffff9f3080138ca0 EFLAGS: 00010246
RAX: 00000000b8bf5770 RBX: ffff91b5e8c639c0 RCX: 0000000000000011
RDX: ffff91b582de1be8 RSI: 0000000000000000 RDI: ffff91b5e8c639e6
RBP: ffff9f3080138d00 R08: 0000000000000000 R09: 0000000000000000
R10: ffff91b59de70000 R11: ffffffffc069be50 R12: ffff91b5e8c639e4
R13: 0000000000000000 R14: ffff91b5828020b8 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff91b8efa40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000032 CR3: 00000002bf838000 CR4: 0000000000750ee0
PKRU: 55555554
Call Trace:
<IRQ>
? __die_body+0x68/0xb0
? page_fault_oops+0x379/0x3e0
? exc_page_fault+0x4f/0xa0
? asm_exc_page_fault+0x22/0x30
? __pfx_rtw89_vif_rx_stats_iter+0x10/0x10 [rtw89_core (HASH:1400 5)]
? rtw89_vif_rx_stats_iter+0xd2/0x310 [rtw89_core (HASH:1400 5)]
__iterate_interfaces+0x59/0x110 [mac80211 (HASH:1400 6)]
? __pfx_rtw89_vif_rx_stats_iter+0x10/0x10 [rtw89_core (HASH:1400 5)]
? __pfx_rtw89_vif_rx_stats_iter+0x10/0x10 [rtw89_core (HASH:1400 5)]
ieee80211_iterate_active_interfaces_atomic+0x36/0x50 [mac80211 (HASH:1400 6)]
rtw89_core_rx_to_mac80211+0xfd/0x1b0 [rtw89_core (HASH:1400 5)]
rtw89_core_rx+0x43a/0x980 [rtw89_core (HASH:1400 5)] |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Check device memory pointer before usage
Add a NULL check before accessing device memory to prevent a crash if
dev->dm allocation in mlx5_init_once() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: reject TDLS operations when station is not associated
syzbot triggered a WARN in ieee80211_tdls_oper() by sending
NL80211_TDLS_ENABLE_LINK immediately after NL80211_CMD_CONNECT,
before association completed and without prior TDLS setup.
This left internal state like sdata->u.mgd.tdls_peer uninitialized,
leading to a WARN_ON() in code paths that assumed it was valid.
Reject the operation early if not in station mode or not associated. |
