| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Use after free in PDFium in Google Chrome prior to 153.0.8010.52 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| A flaw was found in flightctl. The configureRepoHTTPSClient() function in the device-render worker builds a per-repository tls.Config (which may include InsecureSkipVerify, a custom CA bundle, or tenant-supplied mTLS client certificates) and installs it into go-git's process-global client.Protocols map via gitclient.InstallProtocol("https", ...). Because the worker renders devices for multiple organizations concurrently from a shared goroutine pool, whichever tenant's repository configuration is written last wins for all in-flight git.Clone calls.
This race condition can cause one tenant's TLS settings, including InsecureSkipVerify or mTLS client credentials, to leak into another tenant's git operations. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix dangling pointer in CRTC reset function
amdgpu_dm_crtc_reset_state() frees the old state before allocating
a new one. If kzalloc() fails, the function returns without updating
the state pointer, leaving a dangling pointer to already freed memory.
Fix this by allocating the new state first. On allocation failure, the
old state remains untouched and the function safely returns.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
[adjust for movement around current amd-staging-drm-next] |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: synchronize heartbeat callbacks with o2net teardown
Patch series "ocfs2: harden heartbeat teardown races".
This series fixes two OCFS2 heartbeat/o2net teardown races found by
KASAN.
This patch (of 2):
Heartbeat callbacks stay registered while configfs local-node teardown
enters o2net_stop_listening(). A node-down event can still run through
o2net_disconnect_node() and o2net_set_nn_state() while teardown is
destroying o2net_wq, so the later queue/flush operations can hit a dead
workqueue. KASAN has caught this as a slab-use-after-free in
__queue_work() with the call chain:
KASAN slab-use-after-free in __queue_work+0x56/0xa90
Read of size 4
Call trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
__queue_work+0x56/0xa90
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x19f/0x330
kasan_report+0xe0/0x110
__queue_delayed_work+0x58/0x1e0
queue_delayed_work_on+0xb4/0xc0
o2net_set_nn_state+0x467/0x840
o2net_disconnect_node+0x7b/0xe0
o2net_hb_node_down_cb+0x54/0x60
o2hb_run_event_list+0x236/0x2d0
o2hb_check_slot+0xad4/0xbc0
lock_release+0xc8/0x290
o2hb_check_slot+0x9ea/0xbc0
trace_hardirqs_on+0x18/0x130
o2hb_do_disk_heartbeat+0x646/0xb30 (fs/ocfs2/cluster/heartbeat.c:1079)
__lock_acquire+0x466/0x2260
lockdep_hardirqs_on_prepare+0xea/0x1a0
ktime_get_with_offset+0xe9/0x230
o2hb_thread+0x14e/0x770
kthread+0x1ad/0x1f0
ret_from_fork+0x3c9/0x540
__switch_to+0x2e9/0x730
ret_from_fork_asm+0x1a/0x30
Allocated by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
__kmalloc_noprof+0x292/0x760
__alloc_workqueue+0x736/0xc60
alloc_workqueue_noprof+0xb1/0x110
o2net_start_listening+0xe5/0x430
o2nm_node_local_store+0x184/0x310
configfs_write_iter+0x18a/0x210
vfs_write+0x469/0x810
ksys_write+0xd2/0x170
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x313/0x590
rcu_core+0x4f4/0x1320
handle_softirqs+0x156/0x660
queue_delayed_work_on
o2net_set_nn_state
o2net_disconnect_node
o2net_hb_node_down_cb
o2hb_run_event_list
Keep heartbeat callbacks registered so quorum state still tracks node
state, but stop them from driving o2net reconnect/disconnect work once
local teardown starts. Mark the transport offline before destroying
o2net_wq, wait for any in-flight heartbeat callback to finish, and delay
bring-up replay until the new local node is published through
o2nm_this_node().
The replay also has to stay serialized with heartbeat callback delivery.
Otherwise a live-node snapshot can be copied, a real hb_down callback
can install -ENOTCONN for a peer, and the stale replay can call
o2net_hb_node_up() for that same peer and queue reconnect work even
though heartbeat is already down.
The buggy scenario involves two paths, with each column showing the order
within that path:
local-node teardown: heartbeat node-down callback:
1. configfs local-off enters 1. o2hb_run_event_list() invokes
o2net_stop_listening(). o2net_hb_node_down_cb().
2. teardown heads for 2. the callback reaches
destroy_workqueue(o2net_wq). o2net_disconnect_node() and
o2net_set_nn_state().
3. teardown destroys and NULLs 3. the callback flushes or queues
o2net_wq. work through o2net_wq. |
| In the Linux kernel, the following vulnerability has been resolved:
amt: Don't support cross-netns setup.
When a lower device is unregistered, amt_device_event() tries
to unregister its upper AMT device, but it has two problems.
1. amt_lookup_upper_dev() looks up an upper device in the
lower device's netns only
2. amt_device_event() unregisters a single upper device only
If AMT device is created on a lower device in another netns,
removing the lower device triggers the splat below and gets
stuck until all upper devices are removed. [0]
The cross-netns setup seems unintentional considering 1. and
the following points:
* amt_link_setup() sets dev->netns_immutable to true
* skb_scrub_packet() is not called in the fast path
* iproute2 binary fails to find cross-netns lower device via
link-netns:
# ip -n ns1 link add amt0 link-netns ns2 type amt dev veth1
Cannot find device "veth1"
Instead of supporting it properly and preparing for per-netns
netdev unreg, let's forbid cross-netns setup.
Note that the problem 2. needs a separate fix.
[0]:
WARNING: net/core/dev.c:12518 at unregister_netdevice_many_notify+0x1cce/0x2250, CPU#48: ip/2031
Modules linked in:
CPU: 48 UID: 0 PID: 2031 Comm: ip Not tainted 7.2.0-rc5+ #27 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
RIP: 0010:unregister_netdevice_many_notify (net/core/dev.c:12518)
Code: 89 ef e8 d5 52 ae fe e9 d0 f4 ff ff 48 8d 3d f9 3b 9c 02 48 c7 c6 c0 0b 63 84 ba ab 1f 00 00 67 48 0f b9 3a e9 65 ff ff ff 90 <0f> 0b 90 eb 81 48 8d 3d f6 3b 9c 02 48 c7 c6 c0 0b 63 84 ba e2 1f
RSP: 0018:ffffc90004abf160 EFLAGS: 00010212
RAX: ffff888104d38260 RBX: ffff88800b0911b8 RCX: dffffc0000000000
RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffffff85b9f880
RBP: ffffc90004abf2d0 R08: ffffffff85b9f887 R09: 1ffffffff0b73f10
R10: dffffc0000000000 R11: fffffbfff0b73f11 R12: ffff88800b091d08
R13: ffff88800b091178 R14: dffffc0000000000 R15: ffff88800b091000
FS: 00007f555b86c600(0000) GS:ffff8881942a0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000562107d489c0 CR3: 0000000109a40002 CR4: 0000000000372ef0
Call Trace:
<TASK>
rtnl_dellink (net/core/rtnetlink.c:3632 net/core/rtnetlink.c:3674)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7112)
netlink_rcv_skb (net/netlink/af_netlink.c:2556)
netlink_unicast (net/netlink/af_netlink.c:1319)
netlink_sendmsg (net/netlink/af_netlink.c:1900)
____sys_sendmsg (net/socket.c:775)
__sys_sendmsg (net/socket.c:2738)
do_syscall_64 (arch/x86/entry/syscall_64.c:63)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
...
unregister_netdevice: waiting for veth0 to become free. Usage count = 7
ref_tracker: netdev@ffff88800d7496d8 has 3/3 users at
__netdev_adjacent_dev_insert (./include/linux/netdevice.h:4525 ./include/linux/netdevice.h:4554 net/core/dev.c:8791)
__netdev_upper_dev_link (net/core/dev.c:8879 net/core/dev.c:8963)
netdev_upper_dev_link (net/core/dev.c:9009)
amt_newlink (drivers/net/amt.c:3321) |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: sd: Fix error handling in sd_probe() after large pool creation failure
After device_add(&sdkp->disk_dev) succeeds, sd_large_pool_create()
failure must unregister disk_dev and let scsi_disk_release() free
sdkp. Going through out_free_index kfree()s an already registered device
and leaks the sysfs entry. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Invalidate RCU pointers after final spin unlock
In a sleepable BPF program, a spin lock can provide the only RCU protection
for a kptr. The final bpf_spin_unlock() ends that protection, but the
verifier leaves the pointer valid. Another CPU can then free the object
before the pointer is used. A capability-limited runtime PoC triggered a
task_struct use-after-free in __bpf_get_task_stack().
Record whether the program is in an RCU-protected context before releasing
the lock. Invalidate RCU-protected pointers only when the unlock leaves the
final such context. This preserves valid pointers in non-sleepable programs
and inside an explicit RCU read-side section. |
| In the Linux kernel, the following vulnerability has been resolved:
md/md-llbitmap: stop daemon timer rearm on destroy
llbitmap_destroy() deletes pending_timer before flushing
md_llbitmap_io_wq. However, daemon_work can still be queued or running
after the timer has been deleted, and the daemon path can arm
pending_timer again when it finds dirty chunks that are not ready to
flush yet.
If that happens during teardown, pending_timer can remain armed after
llbitmap is freed and later dereference freed memory.
Add a BITMAP_SHUTDOWN bit to llbitmap->flags, set it before deleting
the timer, and make the timer and daemon paths stop queueing or rearming
work once teardown starts. Cancel daemon_work before flushing the shared
workqueue so no already queued daemon instance can race with the free.
Use timer_shutdown_sync() so a daemon instance that passed the shutdown
check before teardown cannot rearm the timer afterward.
BITMAP_SHUTDOWN is a runtime-only state. Mask it out when reading and
updating the llbitmap superblock so the shutdown state is never loaded
from disk or persisted to disk. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: synchronize input before cleaning up a failed probe
hid_device_io_start() allows reports to run concurrently with probe. If
the probe subsequently fails, __hid_device_probe() releases driver
resources and clears hdev->driver without first excluding those report
callbacks.
For example, a report may enter hidraw_report_event() while the failure
path frees the associated hidraw object, leading to a use-after-free when
the report takes the object's list lock.
Stop input before performing failed-probe cleanup. This reacquires
driver_input_lock and waits for any report callback already in progress. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: don't tear down KMS twice when KMS init fails
When priv->kms_init() (mdp4_kms_init() / mdp5_kms_init()) fails partway
through, both display drivers already tear their KMS state down via
mdp4_destroy() / mdp5_kms_destroy() before returning the error. The
common error path in msm_drm_init() then runs msm_drm_uninit() ->
msm_drm_kms_uninit(), which tries to destroy the very same KMS a second
time, which causes a use-after-free crash.
Bring MDP4/MDP5 in line with the DPU driver whose dpu_kms_init() doesn't
perform error cleanup on the failure. Let the common path own the
cleanup, instead of freeing the KMS from their error paths.
The crash trace for the reference:
__lock_acquire from lock_acquire (kernel/locking/lockdep.c:5906 kernel/locking/lockdep.c:5863)
lock_acquire from touch_wq_lockdep_map (kernel/workqueue.c:4094 (discriminator 1))
touch_wq_lockdep_map from __flush_workqueue (kernel/workqueue.c:4136)
__flush_workqueue from msm_drm_kms_uninit (drivers/gpu/drm/msm/msm_kms.c:243 (discriminator 33))
msm_drm_kms_uninit from msm_drm_uninit (drivers/gpu/drm/msm/msm_drv.c:93)
msm_drm_uninit from msm_drm_init (drivers/gpu/drm/msm/msm_drv.c:184)
msm_drm_init from try_to_bring_up_aggregate_device (drivers/base/component.c:249 drivers/base/component.c:227)
try_to_bring_up_aggregate_device from __component_add (drivers/base/component.c:269 drivers/base/component.c:748)
__component_add from dsi_host_attach (drivers/gpu/drm/msm/dsi/dsi_host.c:1739)
dsi_host_attach from mipi_dsi_attach (drivers/gpu/drm/drm_mipi_dsi.c:383)
mipi_dsi_attach from sharp_nt_panel_probe (drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c:247)
Patchwork: https://patchwork.freedesktop.org/patch/742068/ |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: unwind state on add_interface failure
When mt76_wcid_alloc() fails, mt7915_add_interface() returned without
clearing the vif_mask/omac_mask bits it had already set, without removing
the firmware dev info added earlier, and without clearing a monitor_vif
pointer to the vif mac80211 is about to free. mac80211 does not call
remove_interface() for a failed add, so the indices and firmware dev
entry leaked permanently and testmode could dereference the stale
monitor_vif. Add a proper error unwind. |
| Use after free in Microsoft Edge (Chromium-based) allows an unauthorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
liveupdate: Remember FLB retrieve() status
LUO keeps track of successful retrieve attempts on an FLB. It does so
to avoid multiple retrievals of the same FLB. Multiple retrievals cause
problems because once the FLB is retrieved, the serialized data
structures are likely freed and the FLB is likely in a very different
state from what the code expects.
All this works well when retrieve succeeds. When it fails,
luo_flb_retrieve_one() returns the error immediately, without ever
storing anywhere that a retrieve was attempted or what its error code
was. If the user attempts to retrieve another file registered with the
same FLB, LUO will attempt to call the FLB's retrieve() callback again.
The retry is problematic for much of the same reasons listed above. The
FLB is likely in a very different state than what the retrieve logic
normally expects (e.g. some KHO pages may have already been restored and
freed).
There is no sane way of attempting the retrieve again. Remember the
error retrieve returned and directly return it on a retry.
This is done by changing the retrieved bool to a retrieve_status
integer. A value of 0 means retrieve was never attempted, a positive
value means it succeeded, and a negative value means it failed and the
error code is the value.
This is similar to commit f85b1c6af5bc ("liveupdate: luo_file: remember
retrieve() status") which did the same for LUO files. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware_loader: do not queue completed sysfs fallback requests
fw_load_sysfs_fallback() calls device_add() before adding the fw_priv to
pending_fw_head. device_add() publishes the fallback loading interface, so
a userspace helper which discovers the device by scanning sysfs can write 0
to the loading attribute and complete the request before it is queued as
pending.
In that interleaving firmware_loading_store() calls fw_state_done() while
pending_list still points to itself, so it cannot remove an entry from
pending_fw_head. The subsequent unconditional list_add() then queues an
already-completed fw_priv. Once the request is released, pending_fw_head
can retain a pointer to freed memory and the next fallback request can
fault while validating the list.
Only in-flight fallback requests need suspend or reboot abort handling. If
the request is already DONE after device_add(), return success from the
fallback path without sending another uevent, waiting again, or queueing it
as pending. This preserves the invariant that pending_fw_head contains only
active fallback requests. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: o2hb: quiesce negotiate handlers and timeout work
Heartbeat regions publish struct o2hb_region as the private data for the
NEGO_TIMEOUT and NEGO_APPROVE o2net handlers as soon as make_item()
creates the configfs region. The approve handler can call
o2hb_arm_timeout(), so a peer can touch the region timeout work before
dev_store() has finished building the heartbeat runtime, or after teardown
has started to shut that runtime back down.
The final configfs put also has to keep reg alive until the last in-flight
o2net callback drops its handler reference.
o2net_unregister_handler_list() blocks future handler lookups, but it does
not wait for sc_rx_work that already passed o2net_handler_get(). That
drain needs to cover local listener teardown as well, where the o2net
ordered workqueue may already be inside destroy_workqueue().
Fix the lifetime rule in both directions. Initialize the region delayed
works before publishing reg through the o2net handler table, keep new or
stopping regions non-armable with hr_stopping, and quiesce both delayed
works on failed-start and teardown paths even when no heartbeat thread is
left to call o2hb_disarm_timeout(). Then unregister handlers before
tearing down handler-visible region state and make the drain wait for the
active or destroying o2net ordered workqueue before release frees reg.
The buggy scenario involves two paths, with each column showing the order
within that path:
region lifecycle: late negotiate callback:
1. make_item() registers the 1. o2net_process_message() gets a
region handlers before heartbeat handler for reg.
dev_store() has built a 2. The callback runs after the lookup
runnable heartbeat context. lock is dropped and dereferences reg.
2. A failed start or rmdir 3. An approve or timeout path tries to
stops the heartbeat thread, queue reg's delayed work, or release
quiesces existing work, and races the callback body after handler
drops the final configfs ref. unregister.
3. region_release() must drain 4. The callback or delayed work can
handler-visible o2net rx work outlive reg unless lifecycle code
before freeing reg. keeps the region non-armable and
drains the active-or-destroying
o2net workqueue.
Validation reproduced this kernel report:
KASAN slab-use-after-free in __run_timers+0x22c/0x5b0
Write of size 8
Call trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
__run_timers+0x22c/0x5b0
kasan_report+0xe0/0x110
_raw_spin_unlock_irqrestore+0x27/0x60
try_to_wake_up+0x191/0xf70
timer_expire_remote+0xae/0xf0
run_timer_softirq+0x19b/0x1a0
handle_softirqs+0x156/0x660
__irq_exit_rcu+0xc4/0x160
irq_exit_rcu+0xe/0x20
sysvec_apic_timer_interrupt+0x6c/0x80
asm_sysvec_apic_timer_interrupt+0x1a/0x20
Allocated by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
o2hb_heartbeat_group_make_item+0x3c/0x600 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/omap: dsi: Do not copy isr table
To be able to unregister stuff from isrs, the corresponding table was
copied. Nobody seems to unregister stuff that way, so it does not help.
But there are stack-allocated objects passed to these isrs giving chances
of UAF of these objects if irqs are unregistered while they are handled,
so better do not copy that table. |
| In the Linux kernel, the following vulnerability has been resolved:
rapidio: clear mport->net when rio_add_net() fails
rio_alloc_net() stores the newly allocated rio_net in mport->net before
rio_scan_alloc_net() registers the device.
If rio_add_net() fails, rio_scan_alloc_net() drops the device reference
with put_device(), which releases the rio_net through the device release
callback. However, mport->net is left pointing at the freed object.
A later mport unregister path can then dereference the dangling mport->net
pointer and may try to free the same rio_net again.
Clear mport->net in the rio_add_net() failure path, matching the cleanup
done for the destID table allocation failure path. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: skip dying blkg in blkcg_activate_policy()
When switching IO schedulers on a block device, blkcg_activate_policy()
can race with concurrent blkcg deletion, leading to a use-after-free in
rcu_accelerate_cbs.
T1: T2:
blkg_destroy
kill(&blkg->refcnt) // blkg->refcnt=1->0
blkg_release // call_rcu(__blkg_release)
...
blkg_free_workfn
->pd_free_fn(pd)
elv_iosched_store
elevator_switch
...
iterate blkg list
blkg_get(blkg) // blkg->refcnt=0->1
list_del_init(&blkg->q_node)
blkg_put(pinned_blkg) // blkg->refcnt=1->0
blkg_release // call_rcu again
rcu_accelerate_cbs // uaf
Fix this by checking hlist_unhashed(&blkg->blkcg_node) before getting
a reference to the blkg. This is the same check used in blkg_destroy()
to detect if a blkg has already been destroyed. If the blkg is already
unhashed, skip processing it since it's being destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: stop PMSR before P2P and NAN teardown
PMSR request teardown must abort active measurements while the
wireless_dev is still present in the driver. cfg80211_leave_locked() and
cfg80211_stop_pd() already do this before invoking the driver's stop
callback, but cfg80211_stop_p2p_device() and cfg80211_stop_nan() do not.
Those helpers are also called directly by nl80211, rfkill shutdown, and
wireless_dev unregister paths. If one of these paths stops a P2P device
or NAN interface with a pending request, it removes the mac80211
subinterface from the driver first. Subsequent request cleanup cannot
reach the lower driver's abort callback, but cfg80211 frees the request
regardless. Driver state can then retain a stale request and use it when
it later reports a result.
Call cfg80211_pmsr_wdev_down() before stopping the P2P device or NAN
interface. This keeps lower-driver request state and cfg80211 request
ownership in sync for all of the helpers' callers. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/cxgb4: Fix dereg_skb leak and double free in write_tpt_entry()
When the device is in the fatal error state, write_tpt_entry() returns -EIO
before handing the caller's preallocated skb to the transmit path; its
allocation-failure returns do the same. c4iw_dereg_mr() ignores the error
and frees mhp, leaking mhp->dereg_skb. c4iw_get_dma_mr() instead frees the
skb a second time after dereg_mem() already consumed it, a double free.
Make write_tpt_entry() the sole owner of a non-NULL skb, freeing it on
every return preceding handoff to c4iw_ofld_send(): fatal error, tpt and
stag allocation failure. c4iw_ofld_send() consumes the skb on success and
error alike, so drop the redundant kfree_skb() in c4iw_get_dma_mr() after
dereg_mem(). |
