| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| PackageKit's apt backend mistakenly treated all local debs as trusted. The apt security model is based on repository trust and not on the contents of individual files. On sites with configured PolicyKit rules this may allow users to install malicious packages. |
| An invalid memory read vulnerability in a Trend Micro Secuity 2020 (v16.0.0.1302 and below) consumer family of products' driver could allow an attacker to manipulate the specific driver to do a system call operation with an invalid address, resulting in a potential system crash. |
| An untrusted search path remote code execution (RCE) vulnerability in the Trend Micro Secuity 2020 (v16.0.0.1146 and below) consumer family of products could allow an attacker to run arbitrary code on a vulnerable system. As the Trend Micro installer tries to load DLL files from its current directory, an arbitrary DLL could also be loaded with the same privileges as the installer if run as Administrator. User interaction is required to exploit the vulnerbaility in that the target must open a malicious directory or device. |
| In Wireshark 3.2.0 to 3.2.4, the GVCP dissector could go into an infinite loop. This was addressed in epan/dissectors/packet-gvcp.c by ensuring that an offset increases in all situations. |
| ad-ldap-connector's admin panel before version 5.0.13 does not provide csrf protection, which when exploited may result in remote code execution or confidential data loss. CSRF exploits may occur if the user visits a malicious page containing CSRF payload on the same machine that has access to the ad-ldap-connector admin console via a browser. You may be affected if you use the admin console included with ad-ldap-connector versions <=5.0.12. If you do not have ad-ldap-connector admin console enabled or do not visit any other public URL while on the machine it is installed on, you are not affected. The issue is fixed in version 5.0.13. |
| A denial of service vulnerability exists in some Xiaomi models of phones. The vulnerability is caused by out-of-bound read/write and can be exploited by attackers to make denial of service. |
| Reported in SOLR-14515 (private) and fixed in SOLR-14561 (public), released in Solr version 8.6.0. The Replication handler (https://lucene.apache.org/solr/guide/8_6/index-replication.html#http-api-commands-for-the-replicationhandler) allows commands backup, restore and deleteBackup. Each of these take a location parameter, which was not validated, i.e you could read/write to any location the solr user can access. |
| The payload length in a WebSocket frame was not correctly validated in Apache Tomcat 10.0.0-M1 to 10.0.0-M6, 9.0.0.M1 to 9.0.36, 8.5.0 to 8.5.56 and 7.0.27 to 7.0.104. Invalid payload lengths could trigger an infinite loop. Multiple requests with invalid payload lengths could lead to a denial of service. |
| In Wireshark 3.2.0 to 3.2.3, 3.0.0 to 3.0.10, and 2.6.0 to 2.6.16, the NFS dissector could crash. This was addressed in epan/dissectors/packet-nfs.c by preventing excessive recursion, such as for a cycle in the directory graph on a filesystem. |
| An elevation of privilege vulnerability exists in Avira Software Updater before 2.0.6.27476 due to improperly handling file hard links. This allows local users to obtain take control of arbitrary files. |
| In PowerShell App Deployment Toolkit (aka PSAppDeployToolkit) through 3.8.0, an incorrect access control vulnerability in the default configuration may allow an authenticated user to potentially enable escalation of privilege via local access. |
| A flaw was found in Ansible Engine, all versions 2.7.x, 2.8.x and 2.9.x prior to 2.7.17, 2.8.9 and 2.9.6 respectively, when using ansible_facts as a subkey of itself and promoting it to a variable when inject is enabled, overwriting the ansible_facts after the clean. An attacker could take advantage of this by altering the ansible_facts, such as ansible_hosts, users and any other key data which would lead into privilege escalation or code injection. |
| Visual Components (owned by KUKA) is a robotic simulator that allows simulating factories and robots in order toimprove planning and decision-making processes. Visual Components software requires a special license which can beobtained from a network license server. The network license server binds to all interfaces (0.0.0.0) and listensfor packets over UDP port 5093. No authentication/authorization is required in order to communicate with theserver. The protocol being used is a property protocol by RMS Sentinel which provides the licensing infrastructurefor the network license server. RMS Sentinel license manager service exposes UDP port 5093 which provides sensitivesystem information that could be leveraged for further exploitation without any kind of authentication. Thisinformation includes detailed hardware and OS characteristics.After a decryption process, a textual protocol is found which contains a simple header with the requested command,application-identifier, and some arguments. The protocol is vulnerable to DoS through an arbitrary pointerderreference. This flaw allows an attacker to to pass a specially crafted package that, when processed by theservice, causes an arbitrary pointer from the stack to be dereferenced, causing an uncaught exception thatterminates the service. This can be further contructed in combination with RVDP#710 which exploits an informationdisclosure leak, or with RVDP#711 for an stack-overflow and potential code execution.Beyond denying simulations, Visual Components provides capabilities to interface with industrial machinery andautomate certain processes (e.g. testing, benchmarking, etc.) which depending on the DevOps setup might beintegrated into the industrial flow. Accordingly, a DoS in the simulation might have higher repercusions, dependingon the Industrial Control System (ICS) ICS infrastructure. |
| Visual Components (owned by KUKA) is a robotic simulator that allows simulating factories and robots in order toimprove planning and decision-making processes. Visual Components software requires a special license which can beobtained from a network license server. The network license server binds to all interfaces (0.0.0.0) and listensfor packets over UDP port 5093. No authentication/authorization is required in order to communicate with theserver. The protocol being used is a property protocol by RMS Sentinel which provides the licensing infrastructurefor the network license server. RMS Sentinel license manager service exposes UDP port 5093 which provides sensitivesystem information that could be leveraged for further exploitation without any kind of authentication. Thisinformation includes detailed hardware and OS characteristics.After a decryption process, a textual protocol is found which contains a simple header with the requested command,application-identifier, and some arguments. The protocol leaks information regarding the receiving serverinformation, license information and managing licenses, among others.Through this flaw, attackers can retreive information about a KUKA simulation system, particularly, the version ofthe licensing server, which is connected to the simulator, and which will allow them to launch local simulationswith similar characteristics, further understanding the dynamics of motion virtualization and opening doors toother attacks (see RVDP#711 and RVDP#712 for subsequent vulnerabilities that compromise integrity andavailability).Beyond compromising simulations, Visual Components provides capabilities to interface with industrial machinery.Particularly, their PLC Connectivity feature 'makes it easy' to connect simulations with control systems usingeither the industry standard OPC UA or other supported vendor specific interfaces. This fills the gap of jumpingfrom simulation to real and enables attackers to pivot from the Visual Components simulator to robots or otherIndustrial Control System (ICS) devices, such as PLCs. |
| An issue was discovered in Joomla! before 3.9.16. Missing token checks in the image actions of com_templates lead to CSRF. |
| PhoneSystem Terminal in 3CX Phone System (Debian based installation) 16.0.0.1570 allows an authenticated attacker to run arbitrary commands with the phonesystem user privileges because of "<space><space> followed by <shift><enter>" mishandling. |
| PhoneSystem Terminal in 3CX Phone System (Debian based installation) 16.0.0.1570 allows an attacker to gain root privileges by using sudo with the tcpdump command, without a password. This occurs because the -z (aka postrotate-command) option to tcpdump can be unsafe when used in conjunction with sudo. |
| AVEVA Wonderware System Platform 2017 Update 2 and prior uses an ArchestrA network user account for authentication of system processes and inter-node communications. A user with low privileges could make use of an API to obtain the credentials for this account. |
| Rapid7 Insight Agent, version 2.6.3 and prior, suffers from a local privilege escalation due to an uncontrolled DLL search path. Specifically, when Insight Agent 2.6.3 and prior starts, the Python interpreter attempts to load python3.dll at "C:\DLLs\python3.dll," which normally is writable by locally authenticated users. Because of this, a malicious local user could use Insight Agent's startup conditions to elevate to SYSTEM privileges. This issue was fixed in Rapid7 Insight Agent 2.6.4. |
| In Ubiquiti Networks EdgeSwitch X v1.1.0 and prior, a privileged user can execute arbitrary shell commands over the SSH CLI interface. This allows to execute shell commands under the root user. |
