| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| secp256k1-native is a native C secp256k1 implementation for Ruby. In affected native builds, native constant-time scalar multiplication through `Point#mul` or `scalar_multiply_ct` can leak timing information about a secret scalar when compiled by a toolchain that reconstructs branchless selection into a branch. The `Montgomery ladder` uses `uint256_select` with an all-zeros or all-ones mask, but affected GCC builds at `-O2` recover the original condition and emit secret-dependent `je` or `jne` jumps whose timing correlates with scalar bits. This defeats the assumption behind the 0.17.0 `jp_add_internal` infinity-branch fix. A consumer must multiply a secret private key or nonce in a context where an attacker can observe timing; repeated measurements can statistically recover scalar bits. The defect is in the compiled binary, so source review or `ctgrind` on a non-reconstructing toolchain may miss it. GCC 14.3.0, 15.1.0, and 15.2.0 reproduced the branch reconstruction, and `extconf.rb` appends `-O2`. Tested GCC versions through 12.4.0 used bitwise operations and GCC 13.3.0 used constant-time `cmov`; the pure-Ruby path is not affected by this flaw and separately makes no constant-time claim. GCC 16 and clang were untested, and point releases, targets, and flag combinations were not exhaustively bisected. `Earlier pre-0.17.0 versions had different constant-time issues rather than this introduced select idiom.` Version 0.18.0 contains the verified fix. The advisory's broad pre-0.18.0 guidance also covers earlier, different constant-time issues; whether this CVE groups those issues or only the select idiom introduced in 0.17.0 remains unresolved. |
| libriscv is a RISC-V sandbox and emulator. Prior to 1.18, a crafted ELF binary can cause out-of-bounds reads in the host emulator. `Memory<W>::binary_loader` checks `PT_LOAD` program-header bounds, but `Memory<W>::serialize_execute_segment` trusts section-header `sh_offset` and `sh_size` when locating `.text` without verifying the file range against `m_binary.size()`; `Memory<W>::lookup()` has a similar section-table problem. Malformed `.text` or `.symtab` offsets can therefore bypass the program-header checks and point outside the binary buffer, crashing rvlinux. With suitable memory layout or integer overflow, out-of-buffer host heap memory may instead be mapped into the guest by `create_execute_segment()`, potentially exposing host memory. The reported reproducer demonstrates a host SIGSEGV, while memory disclosure through grooming is described as possible rather than demonstrated. This issue is fixed in version 1.18. |
| Tesseract is an open source OCR engine. From 5.4.0 until 5.5.4, AppendLinePolygon in src/api/pagerenderer.cpp destroys the caller-owned right-to-left Pta accumulator while receiving it by value, leaving line_top_rtl_pts and line_bottom_rtl_pts dangling. On an upright Hebrew or Arabic page at the default PAGE XML level, POLYGONFLAG with a false skewed_flag enters the vulnerable calls, while LEVELFLAG greater than zero provides an alternative gate. The calls repeatedly read and free the stale object, causing a double free and use after free and allowing corrupted coordinates to reach RecalcPolygonline. This issue is fixed in version 5.5.4. |
| Out-of-bounds read in Windows GDI allows an unauthorized attacker to disclose information locally. |
| Out-of-bounds read in Windows Win32K allows an authorized attacker to disclose information locally. |
| libosmocore through 1.14.1 contains out-of-bounds reads in the IPA CCM identity-tag parsers in src/gsm/ipa.c. This allows a remote attacker to obtain sensitive information. |
| Blender before 4.5.15 and 5.x before 5.2.3 contains an out-of-bounds read vulnerability in blo_bhead_id_* accessors in readfile.cc that read ID fields without block length checks. Attackers can supply a crafted .blend file with short ID blocks that, when browsed or appended from, causes heap over-reads leading to crashes or heap memory disclosure. |
| libosmocore through 1.14.1 contains an out-of-bounds read in the CBSP WRITE-REPLACE decoder in src/gsm/cbsp.c. This allows a remote attacker to cause a denial of service. |
| A out-of-bounds read vulnerability exists in the vtkChacoReader InputGraph2 functionality of vtk (version(s): 9.6.1). A specially crafted chaco can lead to an out-of-bounds read. An attacker can provide a malicious file to trigger this vulnerability. |
| A remote attacker who knows a valid account's enrolled SSH public key can terminate the shared SSH service in Progress Software WS_FTP Server versions prior to 2024.0.7 and 2025.0.4 on Windows. |
| OpenJPEG 2.4.0 through 2.5.4, and git master through commit 8314119b, contains an out-of-bounds read and write in opj_dwt_encode_and_deinterleave_v() in src/lib/openjp2/dwt.c. This allows an attacker to cause a denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: esp: restore combined single-frag length gate
The ESP out-of-place fast path appends the trailer in esp_output_head()
before esp_output_tail() allocates the destination page frag. The
head-side gate currently checks skb->data_len and tailen separately, but
the tail code allocates a single destination frag from the combined
post-trailer skb->data_len.
Reject the page-frag fast path when the combined aligned length exceeds a
page. Otherwise skb_page_frag_refill() may fall back to a single page while
the destination sg still spans the combined skb->data_len.
Restore this combined-length page gate for both IPv4 and IPv6. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: hci: fix out-of-bounds read in HCP header parsing
Both nfc_hci_recv_from_llc() and nci_hci_data_received_cb() read
packet->header from skb->data at function entry without first checking
that the buffer holds at least one byte. A malicious NFC peer can send
a 0-byte HCP frame that passes through the SHDLC layer and reaches
these functions, causing an out-of-bounds heap read of packet->header.
The same 0-byte frame, if queued as a non-final fragment, also causes
the reassembly loop to underflow msg_len to UINT_MAX, triggering
skb_over_panic() when the reassembled skb is written.
Fix this by adding a pskb_may_pull() check at the entry of each
function before packet->header is first accessed. The existing
pskb_may_pull() checks before the reassembled hcp_skb is cast to
struct hcp_packet remain in place to guard the 2-byte HCP message
header. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tcpm: validate VDO count in Discover Identity ACK handlers
Properly validate the count passed from a device when calling
svdm_consume_identity() or svdm_consume_identity_sop_prime() as the
device-controlled value could index off of the static arrays, which
could leak data. |
| gopacket provides packet processing capabilities for Go. Prior to 1.7.2, the SCTP chunk chain in layers/sctp.go passes attacker-controlled declared lengths and counts to decodeSCTPInit, decodeSCTPShutdown, decodeSCTPError, decodeSCTPSack, and decodeSCTPParameter without checking that each chunk contains the fixed fields, parameter TLVs, gap acknowledgements, or duplicate TSNs those sub-decoders read. A crafted SCTP segment can therefore cause out-of-bounds or inverted slice panics; the panic can terminate applications that use gopacket.DecodeOptions.SkipDecodeRecovery, direct registered decoders, or DecodingLayerParser with IgnorePanic enabled, while the default recovery-enabled APIs convert it to a per-packet decode error. This is the SCTP sub-decoder residual named but not remediated by CVE-2026-65819, whose version 1.7.1 changes bounded the generic dispatcher but left these per-type reads and loops unchecked. The impact is availability only, with no data disclosure, modification, or allocation amplification. This issue is fixed in version 1.7.2. |
| A unauthenticated remote peer may lead rsyslogd to crash due to a flaw in the optional imptcp module. A crafted input sequence during oversize-frame recovery can cause an invalid internal message length and terminate rsyslogd. No confidentiality or integrity impact, privilege escalation, or code execution has been identified. imtcp and the default imptcp framing modes are not affected. |
| An out-of-bounds read vulnerability exists in the streaming RPC client of Apache bRPC (versions 1.11.0 through 1.17.0) on all platforms. A client that creates multiple streams in a single RPC expects the server response to carry exactly one extra_stream_id for every additional stream. The response handling path indexed the returned identifiers using the locally created stream count without first validating the size of the returned list, so a malicious or compromised server (or an on-path attacker) can trigger an out-of-bounds read in the client by returning a malformed StreamSettings response with fewer extra_stream_ids than expected. This may crash the client process (denial of service) or leak unintended memory contents into subsequent stream handling; surplus identifiers have no valid client-stream mapping and are processed inconsistently.
Root Cause:
Since bRPC 1.11.0, a client can create multiple streams in one RPC via batch StreamCreate. The expected behavior is that the server response must return exactly (N-1) extra_stream_ids, where N is the number of locally created streams. In Controller::HandleStreamConnection, the response path reads extra_stream_ids[i-1] for each additional local stream without first comparing the returned list size with (N-1). If the server returns fewer identifiers, the read runs past the end of the returned list (out-of-bounds read); if it returns more, the surplus identifiers have no corresponding client-side stream.
Affected Scenarios:
A bRPC client using multi-stream RPC (creating more than one stream in a single RPC) that connects to an untrusted, malicious, or compromised server or to a server reached through an untrusted network path. The server sends a malformed StreamSettings response to trigger the issue.
How to Fix:
(Choose one of the following options)
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3485
Note:
The fix makes the client reject responses whose extra_stream_ids count does not exactly match the number of additional client streams. Such mismatched responses now fail the RPC with ERESPONSE and go through the existing stream cleanup path, instead of being partially processed. |
| A flaw was found in Eye of GNOME. When parsing a specially crafted PNG image containing malformed color profile metadata, the application fails to validate chunk boundaries while searching for a null terminator. An attacker could trick a user into opening a malicious image, causing the application to read past the allocated buffer. This issue can lead to an application crash, resulting in a Denial of Service (DoS), or potentially expose sensitive memory contents. |
| Blender before 4.5.15 and 5.x before 5.2.3 contains a heap out-of-bounds access vulnerability in read_struct() that skips size validation when a .blend file's SDNA struct layout compares equal. Attackers can supply a crafted .blend file with short blocks so field reads, writes, and pointer dereferences overrun heap memory, causing crashes or code execution. |
| A flaw was found in gcc. An attacker could cause a Denial of Service (DoS) by passing a string that is not null-terminated to the std::from_chars() function in the libstdc++ library. This issue triggers an out-of-bounds read beyond the allocated buffer, potentially leading to invalid data parsing or an application crash. |
