| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/device_sysfs: Use kstrtouint() for poll_msec to prevent truncation
The poll_msec sysfs store file uses simple_strtoul() which accepts an unsigned
long, but the target field (poll_msec) is unsigned int. On 64-bit systems,
a value > UINT_MAX is silently truncated when stored.
Fix the mismatch by using kstrtouint() instead. This rejects values larger
than UINT_MAX at parse time, making truncation impossible. Also add a check
for value < 1 to reject the 0-delay case, which would cause the poll work to
spin without delay and consume 100% CPU. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau/dmem: fix callocated underflow on large folio split
nouveau_dmem_folio_free() drops chunk->callocated once per freed folio,
while a large (compound) device-private folio is only counted once when
it is allocated. When such a folio is split, the mm core invokes
->folio_split() (nouveau_dmem_folio_split()) once for each new
sub-folio, but the hook only fixes up the sub-folio metadata and leaves
chunk->callocated unchanged.
Each resulting sub-folio is later freed separately, so after a split
the single allocation (+1) is met by N frees (-N), leaving
chunk->callocated short by N-1. On the first split/free cycle it
underflows: WARN_ON(!chunk->callocated) fires, the unsigned counter
wraps and never returns to zero, so the chunk can no longer be
reclaimed (nouveau_dmem_fini() also warns on the leaked count).
Account for the new sub-folio in the split hook, under the same lock as
nouveau_dmem_folio_free(), so the count stays balanced. |
| In the Linux kernel, the following vulnerability has been resolved:
memcg: bypass the reclaim and oom killer for dying tasks once oom_reaper is done
At Meta, we are seeing instances where an OOM killed job is stuck in the
exit path for several hours. In one particular case, the job was stuck
for more than 8 hours and I had to manually remove the memory.max limits
to allow the process to exit.
The job was a single process job and had ~55 GiB memory.max and zswap
enabled. It had almost 0 anon in memory and ~111 GiB in zswap compressed
to ~51 GiB zswap pool (i.e. almost all of memory.current was zswap).
Nothing was left on the LRUs to reclaim.
On further inspection, I observed ~20k threads of that process stuck with
the following stack:
[<0>] mem_cgroup_out_of_memory+0x4e/0xa0
[<0>] charge_memcg+0x8bf/0x990
[<0>] mem_cgroup_swapin_charge_folio+0x4e/0x80
[<0>] __read_swap_cache_async+0x10c/0x260
[<0>] swapin_readahead+0x116/0x3f0
[<0>] do_swap_page+0x13c/0x1ce0
[<0>] handle_mm_fault+0x61d/0x11f0
[<0>] do_user_addr_fault+0x3e7/0x6d0
[<0>] exc_page_fault+0x8f/0x110
[<0>] asm_exc_page_fault+0x22/0x30
[<0>] __get_user_8+0x14/0x20
[<0>] futex_cleanup+0x27/0x1c0
[<0>] futex_exit_release+0x47/0x60
[<0>] do_exit+0x107/0x940
[<0>] do_group_exit+0x81/0xa0
[<0>] get_signal+0x2b1/0x6e0
[<0>] arch_do_signal_or_restart+0x1a/0x1c0
[<0>] exit_to_user_mode_loop+0xa8/0x1c0
[<0>] do_syscall_64+0x152/0x250
[<0>] entry_SYSCALL_64_after_hwframe+0x4b/0x53
In addition the dmesg was filled with "Out of memory and no killable
processes..." messages.
I have no idea why oom reaper was not able to reap/unmap the process. My
guess is that since oom reaper tries to acquire mmap_lock in read mode
limited number of times and then gives up, there might be a thread of that
process which had mmap_lock in write mode at that time.
My initial suspicion was the futex_cleanup and kernel page fault causing
infinite fault and charge retries but that was put to rest in previous
discussions happened on similar problem [1].
My current theory is that it is just a simple slow serialization behind
the oom_lock. Unlike page allocator, memcg charge code takes the oom_lock
without the "try". Though memcg oom code uses mutex_lock_killable(), note
that in the call stack get_signal() consumes SIGKILL (or
sigdelset(SIGKILL)) before calling do_group_exit(). So this
mutex_lock_killable() is just a mutex_lock() here. Therefore 10s of
thousands of threads are waiting on oom_lock and one by one they get
-EFAULT from get_user() in the futex cleanup code and bails out.
Discussion from [1] led to commit a75ffa26122b ("memcg, oom: do not bypass
oom killer for dying tasks") which routes dying tasks into the OOM path
precisely so the oom_reaper can reap their mm and free the memory
asynchronously. But the reaper is best-effort and one-shot: if it cannot
take mmap_lock for read (e.g. a sibling thread holds it for write) it
sets MMF_OOM_SKIP and never retries, leaving only the glacial
oom_lock-serialized synchronous drain.
Once MMF_OOM_SKIP is set there is no more asynchronous reclaim coming for
the mm, so a dying task charging against it has nothing left to wait for:
it frees its memory only once it finishes exiting. Running reclaim and
the (no-victim) OOM killer for it is then pointless, and doing it for 10s
of thousands of exiting threads is what serializes them behind oom_lock.
So before reclaim, if current is an OOM victim whose reaper is done, fail
the charge.
Reproduced with 20k threads, each parking a robust futex head on its own
zswapped page, OOM-group-killed while a sibling holds mmap_lock for write
so the reaper gives up and sets MMF_OOM_SKIP. Tested on next-20260728 and
baseline show ~90 seconds exit time while with the patch the exit time
reduced to ~3 seconds. |
| In the Linux kernel, the following vulnerability has been resolved:
clocksource/drivers/timer-sun4i: Advertise a real minimum delta
sun4i_clkevt_next_event() compensates for the timer stop/start
synchronization delay by programming evt - TIMER_SYNC_TICKS into the
hardware interval register. The clockevent device currently advertises
TIMER_SYNC_TICKS as min_delta_ticks, so the clockevents core is allowed
to call set_next_event() with evt == TIMER_SYNC_TICKS.
That programs a zero-tick interval. With oneshot/highres/nohz timer
operation this can leave the next event stuck, which was observed as a
boot hang on Allwinner D1 after the clockevents core started reusing
forced minimum-delta events.
Advertise one extra tick instead, so the smallest event accepted by the
core still programs at least one hardware tick after the synchronization
compensation. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: lenovo_se10_wdt: Fix use-after-free and resource leak risk
Review by sashiko.dev highlighted potential use after free and resource
leak instances.
Set se10_pdev to null to prevent use after free
Remove DMI call back and instead directly call
se10_create_platform_device. Handle error cases appropriately |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: do not use make_bad_inode() in ocfs2_read_inode_block_full()
This reverts commit 58b6fcd2ab34 ("ocfs2: mark inode bad upon validation
failure during read").
Since 'make_bad_inode()' resets inode type to S_IFREG, doing this for
directory inode during active VFS lookup is likely to confuse the latter,
including VFS_BUG_ON_INODE() triggered in this case. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/ftrace: Fix WARNING in __unregister_ftrace_function
perf_ftrace_function_unregister() unconditionally calls
unregister_ftrace_function() without checking whether the ftrace_ops
was ever successfully registered. This triggers a WARN_ON in
__unregister_ftrace_function() when the ops doesn't have
FTRACE_OPS_FL_ENABLED set.
This can happen during perf_event_alloc() error cleanup when
perf_trace_destroy() is called via __free_event() on an event whose
ftrace_ops registration failed or was already torn down by
perf_try_init_event()'s err_destroy path.
The call path is:
perf_event_alloc() error cleanup
-> __free_event()
-> event->destroy() [tp_perf_event_destroy]
-> perf_trace_destroy()
-> perf_trace_event_close()
-> TRACE_REG_PERF_CLOSE
-> perf_ftrace_function_unregister()
-> unregister_ftrace_function()
-> __unregister_ftrace_function()
-> WARN_ON(!(ops->flags & FTRACE_OPS_FL_ENABLED))
Fix this by checking FTRACE_OPS_FL_ENABLED before attempting to
unregister. If the ops is not enabled, just free the filter and
return success. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Reject page faults from non-fault-mode scratch VMs
Having scratch enabled does not make a VM capable of handling recoverable
page faults. Allowing scratch VMs through the ASID lookup also admits
dma-fence mode VMs.
If such a VM faults on an already valid VMA, the handler reports success
without fixing the fault, causing the GPU to retry indefinitely.
Only allow fault-mode VMs through the ASID lookup. Fault-mode VMs using
scratch remain supported, while faults from 3D VMs are rejected.
(cherry picked from commit bfb24a06405b652d37831f3fb66b71d33a6605de) |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: bound qdisc_pkt_len to prevent qdisc soft lockup
qdisc_get_stab() accepts a user-supplied size table, and
__qdisc_calculate_pkt_len() amplifies qdisc_pkt_len() through the
overhead, the size-table data (u16), and size_log (up to
STAB_SIZE_LOG_MAX). A crafted stab can therefore set qdisc_pkt_len()
to ~1 GiB for an ordinary skb. Per-flow deficit schedulers such as
DRR and ETS replenish one quantum per loop iteration; with a tiny
quantum (1) they spin billions of times under the qdisc lock,
producing a soft lockup / RCU stall as illustrated by vega@nebusec.ai.
Cap the final qdisc_pkt_len() to QDISC_PKT_LEN_MAX so the size-table
amplification cannot drive deficit schedulers into an unbounded loop.
A legitimate size table (e.g. qfq's overhead 999999999, which is
handled by dropping) is still accepted.
Introduce cap QDISC_PKT_LEN_MAX (1 << 20) = 1 MiB which is well above
any legitimate single-skb wire length: the largest current skb->len
is GSO_MAX_SIZE (524280), and an ATM-style size table (53/48 cell tax)
amplifies that to ~578 KB, both comfortably below 1 MiB. At the same
time, 1 MiB bounds the deficit refill loop to ~1M iterations per
packet with quantum=1, which completes in a few milliseconds well
under the demonstrated softlockup threshold (~10^9 iterations).
Conditions to recreate the bug:
- CONFIG_NET_SCHED=y, CONFIG_NET_SCH_DRR=y (or CONFIG_NET_SCH_ETS=y).
- Attach a DRR (or ETS) root qdisc with a crafted TCA_STAB that
amplifies qdisc_pkt_len to ~1 GiB (e.g. size_log=15, data=[32768]).
- Add a class with a tiny quantum of 1 and send one small packet; the
deficit loop spins billions of times under the qdisc lock and trips
the softlockup detector (panic with kernel.softlockup_panic=1).
- Reachable as root or from an unprivileged user in a fresh user+net
namespace (unshare -Urn) with namespace-local CAP_NET_ADMIN. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix deadlock in complain-mode change_hat
The use of change_hat when in complain mode can cause a deadlock
when the hat doesn't exist and a new learning profile is created
for the missing profile. This is because change_hat() has taken
the lock to search the hat list and creating the new learning
profile needs to take the lock to add it to the list.
From the bug report:
Originally found in 7.0.0 in LTS ubuntu 26.04 with pam_apparmor + su
in complain mode set to change hats. Then verified in newest
available vanilla kernel I've compiled to see if still present:
7.2-rc7 vanilla -> affected
checked also some other kernels:
6.18.44 vanilla -> affected
6.12.95 with debian patches -> unaffected
On systems without bug (for example 6.12.95 debian) it just prints:
aa_change_hat rc=0
On systems with bug, the executable always hangs, prints nothing and
becomes unkillable. (And once stuck this way, it will cause any
further hat changes to also cause the changing process to get stuck)
Then in syslog you can find hint about cause:
kernel: INFO: task hat:3409 blocked for more than 483 seconds.
kernel: Not tainted 7.2.0-rc7 #1
kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kernel: task:hat state:D stack:0 pid:3409 tgid:3409 ppid:2605 task_flags:0x400000 flags:0x00080800
kernel: Call Trace:
kernel: <TASK>
kernel: __schedule+0x48f/0xfe0
kernel: schedule+0x27/0xa0
kernel: schedule_preempt_disabled+0x15/0x30
kernel: __mutex_lock.constprop.0+0x569/0xa10
kernel: aa_new_learning_profile+0x15f/0x210
kernel: build_change_hat+0x19f/0x3b0
kernel: change_hat.isra.0+0x5dd/0xd60
kernel: aa_change_hat+0x2f3/0x710
kernel: aa_setprocattr_changehat+0x121/0x1f0
kernel: do_setattr+0x28c/0x340
kernel: apparmor_setselfattr+0x20/0x50
kernel: security_setselfattr+0xf6/0x110
kernel: __x64_sys_lsm_set_self_attr+0x53/0x90
kernel: do_syscall_64+0xdd/0x5e0
kernel: ? __mod_memcg_lruvec_state+0xfd/0x260
kernel: ? lruvec_stat_mod_folio+0x8d/0xd0
kernel: ? __folio_mod_stat+0x2d/0x90
kernel: ? map_anon_folio_pte_nopf+0xd1/0x1f0
kernel: ? do_anonymous_page+0x184/0xa10
kernel: ? __handle_mm_fault+0x805/0x870
kernel: ? count_memcg_events+0xef/0x230
kernel: ? handle_mm_fault+0x1f0/0x2f0
kernel: ? do_user_addr_fault+0x2bb/0x7b0
kernel: ? do_syscall_64+0x94/0x5e0
kernel: ? exc_page_fault+0x75/0x160
kernel: entry_SYSCALL_64_after_hwframe+0x76/0x7e
kernel: RIP: 0033:0x7f815e134c8d
kernel: RSP: 002b:00007fff6df94ea8 EFLAGS: 00000246 ORIG_RAX: 00000000000001cc
kernel: RAX: ffffffffffffffda RBX: 0000556d8c81d040 RCX: 00007f815e134c8d
kernel: RDX: 0000000000000046 RSI: 0000556d8c81d040 RDI: 0000000000000064
kernel: RBP: 00007fff6df94ef0 R08: 00007f815e212ac8 R09: 000000000000000c
kernel: R10: 0000000000000000 R11: 0000000000000246 R12: 0000556d8c81d010
kernel: R13: 0000000000000026 R14: 0000000000000046 R15: 0000000000000064
kernel: </TASK>
kernel: INFO: task hat:3409 is blocked on a mutex likely owned by task hat:3409.
To fix the issue, lift the locking out of the core of
aa_new_learning_profile(), introduce a wrapper function that takes the
lock where needed, and have build_change_hat() call the core function
that no longer takes the lock.
In addition fix 4 other issues introduced by commit
32e92764d6f8d ("apparmor: grab ns lock and refresh when looking up changehat child profiles")
- aa_get_profile_rcu() was replaced-by: aa_get_profile without the
accompanying rcu_dereference_protected()
- an extra aa_get_label(label) was introduced at the start of
change_hat() without an accompanying aa_put_label() causing a
reference count leak.
- a reference count leak was introduced in the label_is_stale(label)
case, where the newest profile would be leaked instead of the
label passed to the function.
- a potential UAF when the lookup walks up the tree with new_ns != ns
the new label refere
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
null_blk: free zones array on device power-off
null_init_zoned_dev() allocates dev->zones when a zoned device is powered
on, but null_del_dev() never frees it on power-off; dev->zones is only
freed later in null_free_dev(), when the configfs directory is removed. If
the device is powered off and then on again, null_init_zoned_dev()
allocates a new array and overwrites the dev->zones pointer, leaking the
previous allocation each power cycle.
Free dev->zones in null_del_dev() via null_free_zoned_dev() to solve it.
And calling null_free_zoned_dev() in null_free_dev() is no longer necessary
because every caller already invokes null_del_dev() first: via
nullb_group_drop_item() before nullb_device_release(), in the
null_add_dev() error path of null_create_dev(), and in null_destroy_dev().
Remove the redundant call.
And take &lock around zone_cond_store() in the two store wrappers to
serialize dev->zones check-and-deref against its alloc/free, which already
run under &lock. The reason there was no problem before is that only
nullb_device_release() or null_exit() frees the dev->zones, which
guarantees that subsequent users won't access the configfs interface. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark tracing_multi trampolines as ftrace managed
Since tracing_multi link does not set ftrace_managed, it would fail to
release the tracing_multi link when attaching tracing_multi link and
then attaching fentry link.
[ 3.714215] WARNING: kernel/bpf/trampoline.c:1727 at bpf_trampoline_multi_detach+0x20b/0x240, CPU#1: test_progs/97
...
[ 3.733170] bpf_tracing_multi_link_release+0x14/0x30
[ 3.733890] bpf_link_free+0x58/0x130
[ 3.734414] bpf_link_release+0x23/0x30
Fix it by setting 'ftrace_managed = true' in register_fentry_multi(). |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: intel: int3400: clean up ODVP on probe failures
evaluate_odvp() creates per-ODVP sysfs files before the thermal zone
and later probe resources are registered. The current unwind path only
calls cleanup_odvp() from the late sysfs failure path, so failures after
evaluate_odvp() but before that label, including
thermal_tripless_zone_device_register() failures, leave the ODVP files
and storage behind.
Move the ODVP cleanup to the common ART/TRT unwind path so every failure
after evaluate_odvp() releases the ODVP state. Also clear the cached
ODVP pointers in cleanup_odvp(), because evaluate_odvp() can already call
it for partial setup failures while probe continues. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Fix iopf_refcount leak on RID domain replacement
intel_iommu_attach_device() enables IOPF for the new domain but never
disables it for the old one. device_block_translation(), called at the
start of the function, tears down translation but does not touch any IOPF
state; blocking_domain_attach_dev() has to call iopf_for_domain_remove()
explicitly before invoking it for exactly this reason.
identity_domain_attach_dev() has the same problem. Its comment claims
that no PRI handling is needed because the device has been put in the
blocking state, but the blocking state and the IOPF reference count are
independent of each other.
As a result, replacing a domain that has an iopf_handler with another
domain at RID level leaks a reference in info->iopf_refcount. The count
never drops back to zero, so iopf_queue_remove_device() is never called
and iommu_disable_pci_pri() triggers its WARN_ON(info->iopf_refcount)
when the device is released.
The PASID paths already handle this correctly by way of
iopf_for_domain_replace(); convert the two RID paths to do the same.
Using the replace helper rather than a bare remove keeps the enable
before the disable, so the reference count does not transiently reach
zero and evict the device from the IOPF queue. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: fix double hif2 init on the non-WED path
mt7915_pci_init_hif2() was called unconditionally and again inside the
WED-inactive branch. The helper increments the global hif_idx, writes the
PCIe RECOG_ID register and takes a get_device() reference via
mt7915_pci_get_hif2(), while removal only drops one reference. On non-WED
dual-hif hardware this double-incremented hif_idx, wrote RECOG_ID twice and
leaked a device reference. Only the call inside the WED-inactive branch is
correct; drop the unconditional one. hif2 is already initialised to NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Fix VINTF0 leak on the init-failure path
tegra241_cmdqv_init_structures() allocates VINTF0 with kzalloc_obj(), inits
it, and preallocates its logical VCMDQs. Two of its error paths leak.
When tegra241_cmdqv_init_vintf() fails it returns before VINTF0 reaches the
cmdqv->vintfs[] array, so the devres unwind on probe failure cannot reach
it; free it directly there.
A later VCMDQ preallocation failure instead leaves VINTF0 published, and so
this time the unwind does reach tegra241_cmdqv_remove_vintf(), which then
frees it from vintf->hyp_own. But tegra241_vintf_hw_init() sets that flag
only afterward, from a HW read-back, so the still-uninited VINTF0 reads as
guest-owned and leaks, with mutex_destroy() and ida_destroy() run on fields
it never set up.
Decide ownership from vintf->idx instead, the index assigned when its id is
allocated: idx 0 is the kernel-owned VINTF0, while idx >= 1 marks a guest
VINTF. So the in-kernel free decision in tegra241_cmdqv_remove_vintf() and
tegra241_vintf_free_lvcmdq() now keys on idx too, and hyp_own stays a pure
HW-readback state. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Abort directly from the hardlockup handler
scx_hardlockup() defers the abort to an irq_work because exit claiming used
to take scx_sched_lock and couldn't run from NMI. The deferral is now
unnecessary - claiming is NMI-safe and asserting ->aborting is exactly what
breaks the live-locks that hard-lock CPUs. Call handle_lockup() directly and
drop the irq_work. This also makes the self-detected case recoverable: the
perf watchdog fires on the hard-locked CPU itself, where a queued irq_work
never runs with IRQs off.
Also fix the return value: %true used to be returned whenever sched_ext was
loaded, suppressing the kernel's hardlockup report even when the abort was
refused. Return %true only when this call initiated the abort. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disallow interpreter fallback for arena-related insns
Since the interpreter does not support the arena-related insns,
interpreter fallback should not be allowed for these insns in
core.c::__bpf_prog_select_runtime().
Currently, when the interpreter executes the arena ST/LDX/STX insns,
it would hit the BUG_ON() in ___bpf_prog_run() at run time.
[ 2.579196] BPF interpreter: unknown opcode a2 (imm: 0x0)
[ 2.579998] ------------[ cut here ]------------
[ 2.580652] kernel BUG at kernel/bpf/core.c:2349!
[ 2.581314] Oops: invalid opcode: 0000 [#1] SMP PTI
Set jit_required as true when arena map is used in the prog to disallow
interpreter fallback for arena-related insns. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc4-topology: Return error for invalid number of formats
When the number of input or output formats is zero,
sof_ipc4_widget_setup_comp_src() and sof_ipc4_widget_setup_comp_asrc()
print an error and jump to the cleanup label. At that point 'ret' is
still 0, because the earlier sof_ipc4_get_audio_fmt() call succeeded, so
the function returns success and the caller never finds out that the
widget setup actually failed.
Set ret to -EINVAL before the goto so the error gets reported. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/rockchip: analogix_dp: Fix OF node reference leak via auto cleanup
Sashiko reported a reference leak in rockchip_dp_drm_encoder_enable(),
the of_get_child_by_name() function does not call of_node_put() in a
symmetrical way [1].
Fix the device node reference leak by using __free(device_node) to
automatically manage of_node_put() for all device nodes. |
