| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A improper locking vulnerability in Fortinet FortiOS 8.0.0, FortiOS 7.6.4 through 7.6.6 may allow an unauthenticated attacker with network access to the device to cause a denial of service of the HTTPS management interface via crafted HTTP requests. |
| filelock is a platform-independent file lock for Python. From 3.22.0 until 4.2.1, soft lock classes on Windows read an existing marker with _read_lock_file and remove a stale marker through break_lock_file using pathname operations that wait for an oplock break. Another local account with read access to an unheld marker can keep a Level 1 or batch oplock unanswered, causing SoftFileLock.acquire and related async or fallback locks to wait beyond timeout, blocking=False, and cancel_check. A stale marker under the oplock cannot be broken, but mutual exclusion remains intact and no file other than the marker is accessed. This issue is fixed in version 4.2.1. |
| The Bluetooth Classic AVDTP layer defers releasing a session's stream endpoints: bt_avdtp_l2cap_disconnected() in subsys/bluetooth/host/classic/avdtp.c ends with k_work_submit(&session->_release_work), placing the embedded struct k_work on the system work queue's pending list. When the same struct bt_avdtp object is immediately reused for a new signalling connection, the session memory is re-initialized — a2dp_get_connection() in subsys/bluetooth/host/classic/a2dp.c memset()s the whole struct bt_a2dp, and bt_avdtp_l2cap_accept() / bt_avdtp_connect() call k_work_init() on session->_release_work — while that work item is still linked into k_sys_work_q.pending. Zeroing a linked sys_snode_t truncates the list while its tail pointer keeps pointing past the truncation.
The reuse window is deterministic rather than a race. All host RX processing runs on the Bluetooth RX work queue at a cooperative priority (CONFIG_BT_RX_PRIO), while _release_work is submitted to the lower-priority system work queue, so the release handler cannot run until the RX thread blocks. Because l2cap_br_recv() processes every signalling command contained in a single L2CAP signalling PDU back-to-back, a peer can send one PDU holding an L2CAP Disconnection Request for the AVDTP signalling channel followed by a Connection Request for PSM 0x0019; the second command reaches the session-reuse path with the release work provably still queued. The peer must already hold an encrypted AVDTP signalling channel, i.e. be a paired/bonded BR/EDR device.
The result is corruption of the global system work queue's pending list: either the queue silently stops executing any work at all (subsequent submissions are appended to a chain the head can no longer reach, and the orphaned items keep their K_WORK_QUEUED flag forever) or, in the tail variant, the list acquires a self-referencing node that the queue thread spins on. The written values are pointers to other struct k_work objects and are not attacker-controlled, so the impact is a device-wide, reboot-required denial of service rather than a controllable write primitive. Only builds with CONFIG_BT_CLASSIC and CONFIG_BT_A2DP are affected.
The fix is a two-commit unit, and neither commit closes the path on its own. ec822ceed83b adds a pending-release check to bt_avdtp_connect() and bt_avdtp_l2cap_accept(), but the A2DP upper layer's a2dp_get_connection() memset()s the session — including the queued work item's list node and flags — before those checks run, so k_work_busy_get() would observe an already-cleared state. 2bd5ea88c69b closes that by making a2dp_get_connection() itself skip the reuse and return NULL while the release work is still pending, which both callers already handle by rejecting the connection attempt. Apply both commits together; either one alone leaves the device vulnerable. |
| @twilio-labs/netlify-okta-auth through 1.0.2 relies on an unverified iss claim. This affects an outbound HTTP request to retrieve a public signing key. There may be other impacts in a misconfiguration where oktaUrl isn't set. |
| On Yealink UVC40 E2 devices before 319.410.0.71, an attacker with short-term physical access can steal Wi‑Fi credentials via the USB interface. Sensitive data within the firmware configuration can be abused to gain root privileges on the device. Within Wi‑Fi coverage, the attacker may perform audio and video eavesdropping with no LED alert from the device. |
| VoiceSentinel is a real-time voice moderation system for Minecraft servers. From 2.2.1 until 3.3.1, the optional report buffer feature has a race between retention cleanup and normal transcript writes. In `report_buffer.py`, `_maybe_cleanup()` uses an unlocked dictionary for once-per-hour cleanup throttling, allowing simultaneous `_cleanup_tenant()` operations for one tenant. Cleanup reads `transcripts.jsonl` and rewrites it in place without file locking or atomic replacement, while `report_buffer_append_async` uses `asyncio.to_thread` to append without synchronization. In `main.py`, concurrent `_processing_worker` tasks make this reachable in normal operation; `processing.worker_count` of two or more and public-pool servers sharing a `server_key` increase collisions. With `report_buffer.enabled` set to true, racing writes can lose, duplicate or corrupt transcript data and defeat `report_buffer.retention_seconds` pruning, allowing unbounded disk growth that can exhaust storage and crash the host or other services sharing it. The feature is opt-in and disabled by default. This issue is fixed in version 3.3.1. |
| Apache Airflow's Task SDK secret cache built its keys from the team name and secret id with unescaped `_` delimiters, so different (team, secret id) pairs could collide. In multi-team deployments a Dag author could read another team's Variable or Connection value by crafting a colliding secret id. Only deployments with both `core.multi_team = True` and `secrets.use_cache = True` are affected.
Users are advised to upgrade to apache-airflow 3.4.0 or later. Deployments that cannot upgrade can set `secrets.use_cache = False`. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Application Policy Infrastructure Controller (APIC) engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-76500 are related to issues with improper control of a resource through its lifetime that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-664. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco networking engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-76467 are related to issues concerning improper control of a resource through its lifetime that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-664. |
| As part of Cisco's ongoing commitment to proactive security and product quality, Cisco has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76282 are related to improper control of a resource through its lifetime and are grouped under the Common Weakness Enumeration (CWE) CWE-664. |
| A bug in QEMU could cause a guest I/O operation otherwise addressed to an arbitrary disk offset to be targeted to offset 0 instead (potentially overwriting the VM's boot code). This could be used, for example, by L2 guests with a virtual disk (vdiskL2) stored on a virtual disk of an L1 (vdiskL1) hypervisor to read and/or write data to LBA 0 of vdiskL1, potentially gaining control of L1 at its next reboot. |
| A flaw was found In 3Scale Admin Portal. If a user logs out from the personal tokens page and then presses the back button in the browser, the tokens page is rendered from the browser cache. |
| A vulnerability was found in insights-client. This security issue occurs because of insecure file operations or unsafe handling of temporary files and directories that lead to local privilege escalation. Before the insights-client has been registered on the system by root, an unprivileged local user or attacker could create the /var/tmp/insights-client directory (owning the directory with read, write, and execute permissions) on the system. After the insights-client is registered by root, an attacker could then control the directory content that insights are using by putting malicious scripts into it and executing arbitrary code as root (trivially bypassing SELinux protections because insights processes are allowed to disable SELinux system-wide). |
| A flaw was found in libvirt. The virStoragePoolObjListSearch function does not return a locked pool as expected, resulting in a race condition and denial of service when attempting to lock the same object from another thread. This issue could allow clients connecting to the read-only socket to crash the libvirt daemon. |
| A race condition vulnerability was found in the vmwgfx driver in the Linux kernel. The flaw exists within the handling of GEM objects. The issue results from improper locking when performing operations on an object. This flaw allows a local privileged user to disclose information in the context of the kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
net/tls: Fail tls_sw_splice_read() after a failed async decrypt
When an async decrypt fails, tls_decrypt_done() records the error in
ctx->async_wait.err and calls tls_err_abort(), which stores it in
sk_err. tls_sw_recvmsg() and tls_sw_read_sock() each read
async_wait.err once they hold the reader lock and fail the call: a
record that did not authenticate breaks the connection.
tls_sw_splice_read() has no such check, and sk_err does not stand in
for one. tls_rx_rec_wait() tests sk_err only inside the loop it
skips whenever a record is already parsed, and the first reader to
reach sock_error() clears it, while async_wait.err persists. A
splice therefore keeps delivering records on a connection that
recvmsg() and read_sock() refuse to read.
Read async_wait.err in tls_sw_splice_read() as the other two readers
do. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: stop retrying saturated xattr cache entries
ext4_xattr_block_set() retries when a cache entry selected for reuse
has a saturated reference count after taking the buffer lock. The retry
returns to the mbcache lookup without making that entry ineligible, so
it can select the same unusable entry indefinitely. A task spinning
there can hold the parent directory's i_rwsem and leave concurrent
rmdir callers blocked.
Normally a reusable entry has a reference count below
EXT4_XATTR_REFCOUNT_MAX because the count and MBE_REUSABLE_B are
updated under the same buffer lock. A corrupted filesystem can violate
that invariant. The syzbot reproducer reports allocator and xattr
corruption before triggering this retry loop.
Check the untrusted on-disk count before incrementing it, avoiding
overflow, and clear MBE_REUSABLE_B when it is already saturated. The
next lookup then skips the entry that was just proven unusable. This
mirrors the normal transition at EXT4_XATTR_REFCOUNT_MAX; the release
path marks the entry reusable again on the exact 1024-to-1023
transition.
Using the same QEMU harness and guest parameters, current unpatched
Linux hung in 6 of 8 420-second trials with the do_rmdir signature;
representative NMI backtraces caught the owner spinning in
ext4_xattr_block_set(). The patched kernel completed 28 of 28 trials
without a hung-task report; the final twelve trials exercised the
reviewed overflow-safe form of the change. syzbot's patch testing also
completed without reproducing the hang. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-verity: make error counter atomic
The error counter "v->corrupted_errs" was not atomic, thus it could be
subject to race conditions. The call to
dm_audit_log_target("max-corrupted-errors") may be skipped due to the
races. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: tegra: do not call pinctrl for GPIO direction
tegra_gpio_direction_input() and tegra_gpio_direction_output() already
program the GPIO controller direction registers directly. The additional
pinctrl_gpio_direction_input/output() calls do not add a Tegra pinctrl
operation, because the Tegra pinmux ops provide GPIO request/free
handling but no gpio_set_direction hook.
The extra call still enters the pinctrl core and takes pctldev->mutex.
Shared GPIO users can call the direction path while holding their
per-line spinlock, so this otherwise redundant pinctrl direction call can
sleep in an atomic context.
This was found by our static analysis tool and then confirmed by manual
review of tegra_gpio_probe(), the Tegra GPIO direction callbacks and the
Tegra pinctrl ops. The reviewed path has a default non-sleeping
struct gpio_chip while the direction callback still enters the pinctrl
mutex path.
A directed runtime validation kept the same non-sleeping chip registration
and drove:
gpio_shared_proxy_direction_output()
gpiod_direction_output_raw_commit()
tegra_gpio_direction_output()
pinctrl_gpio_direction_output()
Lockdep reported a sleep-in-atomic warning with the shared GPIO spinlock
held and pinctrl_get_device_gpio_range() plus tegra_gpio_direction_output()
on the stack.
Do not mark the whole chip as can_sleep to paper over this: can_sleep
describes whether get()/set() may sleep, and Tegra value access is MMIO.
Remove the redundant pinctrl direction calls and keep pinctrl involvement
in the existing request/free path. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: wake eh reliably when using scsi_schedule_eh
Drivers which use the scsi_schedule_eh function to run the error handler
currently risk the error handler thread never waking once all commands are
timed out or inactive. There is no enforced memory order between setting
the host into error recovery state and counting busy commands. This can
result in a race with scsi_dec_host_busy where neither CPU sees both
conditions of all commands inactive and the host error state to request
waking the error handler.
To fix this, run the scsi_schedule_eh's scsi_eh_wakeup from a new work item
which will use rcu to ensure scsi_schedule_eh's call to scsi_host_busy will
occur after the error state is globally visible and will be seen by any
current scsi_dec_host_busy callers. |
