| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| MOOS-IvP through 24.8.1 contains a denial of service vulnerability in the Demuxer::addMuxPacket() function that trusts the packet count declared in mux headers without validation. Attackers can declare arbitrarily large packet counts to trigger unbounded memory allocation, exhausting system resources and causing service unavailability. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: pidff: fix OOB write when hid->inputs is empty
hid_pidff_init_with_quirks() derives its input_dev from
list_entry(hid->inputs.next, struct hid_input, list)
without first checking that hid->inputs is non-empty. The list member
of struct hid_input is at offset 0, so on an empty list list_entry()
yields &hid->inputs itself and the following hidinput->input load reads
an unrelated member of struct hid_device. dev is then a type-confused
pointer, and force-feedback init writes through it: each
set_bit(FF_*, dev->ffbit) stores 8 bytes at dev + 192, past the end of
the object dev actually aliases, and input_ff_create() adds further
writes of a heap pointer and two function pointers.
Until hid-universal-pidff the only caller was hid_pidff_init() from
usbhid, which runs under HID_CLAIMED_INPUT and therefore always has at
least one hid_input. universal_pidff_probe() starts the device with
HID_CONNECT_DEFAULT & ~HID_CONNECT_FF and then calls
hid_pidff_init_with_quirks() directly whenever the descriptor carries a
PID usage page, bypassing that gate. A report descriptor whose only
application collection is on HID_UP_PID leaves hid->inputs empty while
hid_connect() still succeeds through the hidraw claim, so probe reaches
the unguarded list_entry().
The write happens in the USB probe path, on the hotplug workqueue, so
plugging in a malicious device is enough to trigger it; no attacker
software and no logged-in user are required. KASAN reports an 8-byte
out-of-bounds write in hid_pidff_init_with_quirks() reached from
universal_pidff_probe().
Check for an empty list before deriving dev and return -ENODEV, as the
other HID force-feedback drivers already do. universal_pidff_probe()
propagates the error and unwinds.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| Memory Allocation with Excessive Size Value (CWE-789) in the Prometheus remote_write HTTP handler in Metricbeat can lead Denial of Service via Excessive Allocation (CAPEC-130). |
| A flaw has been found in sigoden aichat up to 0.30.4. This affects an unknown function of the file src/serve.rs of the component API Endpoint. This manipulation causes uncontrolled memory allocation. The attack can be initiated remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A weakness has been identified in RightNow-AI OpenFang up to 0.6.9. This vulnerability affects the function shell_exec of the file crates/openfang-runtime/src/tool_runner.rs. This manipulation causes uncontrolled memory allocation. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| Prometheus is an open-source monitoring system and time series database. Prior to versions 3.5.3 and 3.11.3, the remote read endpoint (/api/v1/read) does not validate the declared decoded length in a snappy-compressed request body before allocating memory. An unauthenticated attacker can send a small payload that causes a huge heap allocation per request. Under concurrent load this can exhaust available memory and crash the Prometheus process. This issue has been patched in versions 3.5.3 and 3.11.3. |
| In Bouncy Castle for Java before 1.85, HSS public-key level count unbounded, enabling huge allocation on verify. This issue also affects Bouncy Castle for Java LTS before 2.73.12, and Bouncy Castle for Java FIPS (BC-FJA) before bc-fips 2.0.2 (2.0.X series) and 2.1.3 (2.1.X series). |
| In Bouncy Castle for Java before 1.85, OpenPGP user-attribute subpacket length bounded only by JVM max memory. This issue also affects Bouncy Castle for Java LTS before 2.73.12, and Bouncy Castle for Java FIPS (BC-FJA) before bcpg-fips 1.0.13 (1.0.X series), 2.0.13 (2.0.X series) and 2.1.13 (2.1.X series). |
| openssl_encrypt before 1.4.9 fails to validate the total field from QR JSON payloads before materializing ranges. Attackers can supply crafted QR images with extremely large total values to trigger unbounded memory allocation and cause denial of service through out-of-memory conditions. |
| A vulnerability was found in NousResearch hermes-agent up to 0.18.2. This vulnerability affects the function list_tools of the file tools/mcp_tool.py of the component MCP Tool. Performing a manipulation results in uncontrolled memory allocation. It is possible to initiate the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw was found in libssh. A remote authenticated client can issue SSH_FXP_READ requests with an arbitrarily large length, causing a libssh SFTP server to allocate excessive memory and potentially exhaust it through repeated requests. |
| Memory Allocation with Excessive Size Value (CWE-789) in Elasticsearch can lead to denial of service via Excessive Allocation (CAPEC-130). An authenticated user holding only read privileges on a single index can submit one small, specially crafted search request that causes an excessively large memory allocation, exhausting the JVM heap and terminating the affected node. |
| Elasticsearch does not validate a size value taken from a user-supplied input before that value is used to reserve memory for an internal data structure. An authenticated user holding only read privileges can submit a single small crafted request to a product API endpoint that causes the node to attempt an excessively large allocation. The resulting memory exhaustion raises a fatal error that terminates the Elasticsearch node process, causing a denial of service for the affected node and degrading cluster health. The defect is not volumetric, so a single request is sufficient regardless of the heap size configured on the target node. |
| A flaw in Elasticsearch allows a low-privileged authenticated user to submit a single small request containing a forged opaque identifier. Elasticsearch decodes and deserializes the identifier before confirming that it was legitimately issued by the cluster, and a size value carried inside the identifier drives an allocation that is neither capped nor accounted for by the available memory-usage controls. The resulting out-of-memory condition is fatal and terminates the affected node process, resulting in a denial of service. |
| Elasticsearch does not enforce an upper bound on a user-supplied count accepted by a search highlighting option, and the allocation derived from that count is not accounted against any circuit breaker. An authenticated user holding only read privileges on a single searchable index can submit one small search request that causes the node to reserve an excessively large internal data structure. The allocation occurs before the existing highlighting safety limits are evaluated, so memory exhaustion raises a fatal error that terminates the Elasticsearch node process. This results in a denial of service for the affected node and degrades cluster routing and health. The defect is not volumetric and does not depend on the size of the indexed data, so a single request is sufficient. |
| openssl_encrypt (pip: openssl-encrypt) versions 1.4.8 and earlier fail to validate the 36-bit STREAMINFO total_samples field of FLAC files before using it to size an allocation (np.random.randint(size=(total_samples, channels))). A ~50-byte crafted FLAC file declaring ~100 million samples causes a multi-gigabyte memory allocation, leading to out-of-memory denial of service during 'decrypt --stego-extract'. The issue is fixed in 1.4.9; both the 1.4.x and 1.5.x lines are affected. |
| In Bouncy Castle for Java before 1.85, DTLS handshake reassembler allocates buffer from unchecked 24-bit length. This issue also affects Bouncy Castle for Java LTS before 2.73.12, and Bouncy Castle for Java FIPS (BC-FJA) before bctls-fips 1.0.24 (1.0.X series), 2.0.24 (2.0.X series) and 2.1.24 (2.1.X series). |
| In Bouncy Castle for Java before 1.85, Possible OOM from unbounded up-front allocation on a definite-length read. This issue also affects Bouncy Castle for Java LTS before 2.73.12, and Bouncy Castle for Java FIPS (BC-FJA) before bc-fips 1.0.2.7 (1.0.X series), 2.0.2 (2.0.X series) and 2.1.3 (2.1.X series), and before bctls-fips 1.0.24. |
| In Bouncy Castle for Java before 1.85, MLS wire decoder allocates attacker-declared opaque length before bounds check. |
| In Bouncy Castle for Java before 1.85, BKS/UBER keystore allocates from untrusted lengths before integrity check. This issue also affects Bouncy Castle for Java LTS before 2.73.12. |
