Export limit exceeded: 357925 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (2314 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-62737 | 1 Microsoft | 4 Windows 11 24h2, Windows 11 25h2, Windows 11 26h1 and 1 more | 2026-08-11 | 7.8 High |
| Untrusted pointer dereference in Windows Kernel allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-64096 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: mcast: fix use-after-free in orig_node RCU release batadv_mcast_purge_orig() removes entries from RCU-protected hlists but does not wait for an RCU grace period before returning. Concurrent RCU readers may still accesses references to those entries at the point of removal. RCU-protected readers trying to operate on entries like orig->mcast_want_all_ipv6_node will then access already freed memory. Fix this by moving batadv_mcast_purge_orig() to batadv_orig_node_release(), just before the call_rcu() invocation. This ensures RCU readers that were active at purge time have drained before the orig_node memory is reclaimed. | ||||
| CVE-2026-64099 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Fix use-after-free of CPU job query arrays on error path The CPU job ioctl's fail label calls kvfree() on cpu_job's timestamp and performance query arrays after v3d_job_cleanup(), which drops the job's last reference and frees cpu_job. Reading cpu_job at that point is a use-after-free. Also, on the early v3d_job_init() failure path, it is a NULL dereference, since v3d_job_deallocate() zeroes the local pointer. In the success path, the arrays are released from the scheduler's .free_job callback, but on the error path, they are freed manually, as the job was never pushed to the scheduler. While the success path deals with this correctly, the fail path doesn't. On top of that, the manual kvfree() calls only free the array storage; they don't drm_syncobj_put() the per-query syncobjs that v3d_timestamp_query_info_free() and v3d_performance_query_info_free() release on the success path. So the same fail path that triggers the use-after-free also leaks one syncobj reference per query. Unify the CPU job teardown into the CPU job's kref destructor, mirroring v3d_render_job_free(). The scheduler's .free_job slot reverts to the generic v3d_sched_job_free() and the fail label drops the manual kvfree() calls, leaving a single teardown path that is reached from both the scheduler and the ioctl error path. That removes the use-after-free, the NULL dereference, and the syncobj leak by construction. | ||||
| CVE-2026-60005 | 1 F5 | 6 Nginx Gateway Fabric, Nginx Ingress Controller, Nginx Instance Manager and 3 more | 2026-08-11 | 8.2 High |
| NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_slice_module module. When the slice directive and unnamed regex captures are configured or when a background cache update happens, unauthenticated attackers can send requests that may cause uninitialized memory access in the NGINX worker process, leading to limited disclosure of memory or a restart. Impact: This vulnerability may allow remote, unauthenticated attackers to have limited control to disclose memory contents or restart the NGINX worker process. There is no control plane exposure; this is a data plane issue only. Note: The ngx_http_slice_module module is not enabled by default; it's enabled with the --with-http_slice_module configuration parameter. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. | ||||
| CVE-2026-66843 | 1 Rrrene | 2 Html Sanitize Ex, Htmlsanitizeex | 2026-08-11 | 6.1 Medium |
| Inclusion of Functionality from Untrusted Control Sphere vulnerability in the HTML5 scrubber in rrrene html_sanitize_ex allows a remote attacker to load a document of their choosing into a trusted page via the data attribute of an <object> element in sanitized HTML. object is the one URI-bearing element in lib/html_sanitize_ex/scrubber/html5.ex never registered through allow_tag_with_uri_attributes/3, and its only guard is a prefix match on lowercase "javascript:", so mixed-case variants, data: URIs, protocol-relative URLs and same-origin paths all survive. This is not unconditional cross-site scripting. A javascript: URL does not execute through <object data> in current browsers, data: documents load in an opaque origin, and host-origin script execution additionally requires the application to serve attacker-controlled content from a same-origin path. This issue affects html_sanitize_ex: from 0.3.1 before 1.5.3. | ||||
| CVE-2026-43003 | 1 Openstack | 2 Ironic-python-agent, Ironic Python Agent | 2026-08-11 | 8 High |
| An issue was discovered in OpenStack ironic-python-agent 1.0.0 through 11.5.0. Ironic Python Agent (IPA) sometimes executes grub-install from within a chroot of the deployed partition image, leading to code execution in the case of a malicious image. | ||||
| CVE-2021-41841 | 1 Insyde | 1 Insydeh2o | 2026-08-11 | 8.2 High |
| An issue was discovered in AhciBusDxe in the kernel 5.0 through 5.5 in Insyde InsydeH2O. There is an SMM callout that allows an attacker to access the System Management Mode and execute arbitrary code. This occurs because of Inclusion of Functionality from an Untrusted Control Sphere. | ||||
| CVE-2021-33626 | 2 Insyde, Siemens | 33 Insydeh2o, Ruggedcom Apr1808, Ruggedcom Apr1808 Firmware and 30 more | 2026-08-11 | 7.8 High |
| A vulnerability exists in SMM (System Management Mode) branch that registers a SWSMI handler that does not sufficiently check or validate the allocated buffer pointer(QWORD values for CommBuffer). This can be used by an attacker to corrupt data in SMRAM memory and even lead to arbitrary code execution. | ||||
| CVE-2026-68359 | 1 Linux | 1 Linux Kernel | 2026-08-11 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (nzxt-smart2) Stop device IO before calling hid_hw_stop Calling hid_hw_stop() does not stop the device IO. This results in a race condition between hid_input_report() and the point immediately following the execution of hid_device_io_start() within the driver probe function. If the probe operation fails after "io start" has been initiated, this race condition will result in a UAF vulnerability. Fix the problem by calling hid_device_io_stop() before calling hid_hw_stop(). | ||||
| CVE-2026-68380 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix use-after-free of mm_struct in job scheduler amdxdna_cmd_submit() stores current->mm in job->mm without holding any reference. aie2_sched_job_run() later access job->mm from the DRM scheduler worker thread. With only a raw pointer and no structural reference, the mm_struct can be freed before the scheduler runs the job. Fix this by calling mmgrab() to hold a structural mm_count reference for the lifetime of the job, paired with mmdrop() in every cleanup path. | ||||
| CVE-2026-68393 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: extend conn_hash lookup critical sections Using RCU-protected pointers outside the critical sections without refcount is incorrect and may result to UAF. Extend critical section to cover both hci_conn_hash lookup and use of the returned conn. Add surrounding rcu_read_lock() also when return value is not used, in preparation for RCU lockdep requirement to hci_lookup_le_connect(). This avoids concurrent deletion of the conn before we are done dereferencing it. Also, make sure to hold hdev->lock when accessing hdev->accept_list. | ||||
| CVE-2026-8917 | 1 Asus | 4 Ai Suite3, Gpu Tweak Iii, Gputweakii and 1 more | 2026-08-11 | N/A |
| Untrusted Pointer Dereference in ASUS GPU Tweak III, GPUTweakII, AI Suite3, and VGAdll: An IOCTL vulnerability allows a local attacker to write a specific value to an arbitrary memory address, potentially leading to privilege escalation. Refer to the ' Security Update for ASUS GPU Tweak III, GPU Tweak II, AI Suite 3, and Armoury Crate Security Bulletin ' section on the ASUS Security Advisory for more information. | ||||
| CVE-2026-64564 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sctp: don't free the ASCONF's own transport in DEL-IP processing sctp_process_asconf() caches the transport the ASCONF chunk is processed against in asconf->transport (== chunk->transport, set once in sctp_rcv()). For an ASCONF located through its Address Parameter by __sctp_rcv_asconf_lookup(), that cached transport corresponds to the Address Parameter, which need not be the packet's source address. sctp_process_asconf_param() rejects a DEL-IP for the packet source address (ADDIP D8, SCTP_ERROR_DEL_SRC_IP), but nothing protects asconf->transport. A single ASCONF can therefore carry, in order: [Address Parameter L] [DEL-IP L] [DEL-IP 0.0.0.0] where L differs from the source. The DEL-IP for L passes the D8 check and calls sctp_assoc_rm_peer() on the transport that asconf->transport still points at, freeing it (RCU-deferred). The following wildcard DEL-IP then reuses the now-dangling asconf->transport in sctp_assoc_set_primary() and sctp_assoc_del_nonprimary_peers(): set_primary() dereferences the freed transport (->ipaddr, ->state) and plants the dangling pointer into asoc->peer.primary_path / active_path, and del_nonprimary_peers(), keeping only the pointer that is no longer on the list, removes every real transport, leaving the association with a transport_count of 0 and primary_path/active_path pointing at freed memory. Reject a DEL-IP that targets the transport the ASCONF is being processed against, mirroring the existing source-address guard, so the wildcard branch can never reuse a freed transport. | ||||
| CVE-2026-68363 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: hif_usb: don't dereference hif_dev after re-arming firmware request ath9k_hif_request_firmware() re-arms an asynchronous firmware load via request_firmware_nowait(), passing hif_dev as the completion context, and then still dereferences hif_dev: dev_info(&hif_dev->udev->dev, "ath9k_htc: Firmware %s requested\n", hif_dev->fw_name); The re-armed callback ath9k_hif_usb_firmware_cb() runs on the "events" workqueue and, when the firmware is missing, walks the retry chain into ath9k_hif_usb_firmware_fail() -> complete_all(&hif_dev->fw_done). That releases the wait_for_completion(&hif_dev->fw_done) in a concurrent ath9k_hif_usb_disconnect(), which then kfree()s hif_dev. The trailing dev_info() in the frame that re-armed the request can therefore read freed memory (hif_dev->udev, the first field of struct hif_device_usb): BUG: KASAN: slab-use-after-free in ath9k_hif_request_firmware Read of size 8 ... by task kworker/... ath9k_hif_request_firmware ath9k_hif_usb_firmware_cb drivers/net/wireless/ath/ath9k/hif_usb.c:1247 request_firmware_work_func Allocated by ...: ath9k_hif_usb_probe drivers/net/wireless/ath/ath9k/hif_usb.c Freed by ...: ath9k_hif_usb_disconnect -> kfree drivers/net/wireless/ath/ath9k/hif_usb.c The fw_done barrier only makes disconnect wait for the firmware chain to *terminate*; it does not protect the outer ath9k_hif_request_firmware() frame that re-armed the request and keeps touching hif_dev afterwards. Drop the post-request dev_info(): it is the only use of hif_dev after the async request is armed, and it is purely informational (the dev_err() on the failure path runs only when request_firmware_nowait() did not arm a callback, so hif_dev is still alive there). This was first reported by syzbot as a single, non-reproduced crash that was later auto-obsoleted, and was independently rediscovered by the reFuzz fuzzer, which produced a C reproducer (USB-gadget connect/disconnect of an ath9k_htc device whose firmware download fails). The vulnerable code is unchanged and still present in v7.1-rc6, where the slab-use-after-free reproduces under KASAN once the (sub-microsecond) race window is widened. | ||||
| CVE-2026-68370 | 1 Linux | 1 Linux Kernel | 2026-08-11 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: dummy_hcd: prevent fifo_req reuse during giveback dummy_hcd embeds a single shared usb_request (dum->fifo_req) that the "emulated single-request FIFO" fast-path in dummy_queue() reuses for small IN transfers: it copies the caller's request into it (req->req = *_req) and queues it, treating list_empty(&fifo_req.queue) as "the slot is free". The completion side (dummy_timer/transfer/nuke/dummy_dequeue) follows the standard pattern: list_del_init(&req->queue) unlinks the request, then the lock is dropped and usb_gadget_giveback_request() invokes req->complete(). But list_del_init() makes fifo_req.queue look empty *before* the completion callback returns, so a concurrent dummy_queue() on another CPU sees the slot as free, reuses fifo_req and runs req->req = *_req -- overwriting req->complete while dummy_timer is mid-calling it. The indirect call then jumps to a clobbered pointer, causing a general protection fault / page fault in dummy_timer (syzkaller extid faf3a6cf579fc65591ca). The clobbering write is an in-bounds memcpy on a live shared object, so KASAN cannot flag it. Add a fifo_req_busy bit covering the shared request's whole lifetime: set it in dummy_queue() when the FIFO fast-path takes fifo_req (making it the fast-path guard, replacing the list_empty(&fifo_req.queue) test), and clear it after the completion callback has returned, via a dummy_giveback() helper used at all four gadget-request giveback sites. The shared slot can no longer be reused until its completion callback has finished. | ||||
| CVE-2026-68423 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mtd: virt_concat: fix use-after-free in mtd_virt_concat_destroy() mtd_concat_destroy() frees item->concat so calling mtd_virt_concat_put_mtd_devices(item->concat) after that leads to a use-after-free. Fix it by moving mtd_virt_concat_put_mtd_devices() before mtd_concat_destroy(). | ||||
| CVE-2026-68428 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Fix use-after-free on vendor module reload mmu_destroy_caches() destroys pte_list_desc_cache and mmu_page_header_cache, but leaves both pointers unchanged. The pointers live in kvm.ko, and therefore survive when a vendor module is unloaded while kvm.ko remains loaded. If creation of pte_list_desc_cache fails during a subsequent vendor module load, its assignment sets pte_list_desc_cache to NULL and the error path calls mmu_destroy_caches(). mmu_page_header_cache still points to the cache destroyed during the preceding vendor module unload. Passing that stale pointer to kmem_cache_destroy() causes a slab use-after-free. Reproduce the issue on a v7.1.3 kernel with CONFIG_KASAN=y, CONFIG_KASAN_GENERIC=y, CONFIG_KVM=m, and CONFIG_KVM_INTEL=m. A one-shot test hook forces pte_list_desc_cache to NULL on the second invocation of kvm_mmu_vendor_module_init(): 1. Load kvm.ko and kvm-intel.ko, creating both caches. 2. Unload only kvm_intel, leaving kvm.ko loaded. 3. Reload kvm_intel and force initialization through the -ENOMEM path. KASAN reports: BUG: KASAN: slab-use-after-free in kvm_mmu_vendor_module_init+0x5b/0x170 [kvm] ... kmem_cache_destroy+0x21/0x1d0 kvm_mmu_vendor_module_init+0x5b/0x170 [kvm] ... Allocated by task 16817: __kmem_cache_create_args+0x12c/0x3b0 __kmem_cache_create.constprop.0+0xb6/0xf0 [kvm] kvm_mmu_vendor_module_init+0x13b/0x170 [kvm] ... Freed by task 16820: kmem_cache_destroy+0x117/0x1d0 kvm_mmu_vendor_module_exit+0x21/0x30 [kvm] Clear both pointers immediately after destroying their caches so that the stored state reflects the caches' lifetime and repeated cleanup is safe. With the fix applied, the same injected vendor module reload fails with -ENOMEM as expected and produces no KASAN report. | ||||
| CVE-2026-68377 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_tunnel_key: Defer dst_release to RCU callback Fix a race-condition use-after-free in tunnel_key_release_params(). The function releases the metadata_dst of the old params synchronously via dst_release() while deferring the params struct free with kfree_rcu(). A concurrent tunnel_key_act() reader on the datapath may still hold the old params pointer (under rcu_read_lock_bh) and proceed to call dst_clone(¶ms->tcft_enc_metadata->dst) after the writer's dst_release has already pushed the dst's rcuref to RCUREF_DEAD. zdi-disclosures@trendmicro.com produced a poc which i (and Victor) verified that KASAN reports: ================================================================== BUG: KASAN: slab-use-after-free in instrument_atomic_read_write include/linux/instrumented.h:112 BUG: KASAN: slab-use-after-free in atomic_sub_return_release include/linux/atomic/atomic-instrumented.h:326 BUG: KASAN: slab-use-after-free in __rcuref_put include/linux/rcuref.h:109 BUG: KASAN: slab-use-after-free in rcuref_put include/linux/rcuref.h:173 BUG: KASAN: slab-use-after-free in dst_release+0x5b/0x370 net/core/dst.c:168 Write of size 4 at addr ffff88806158de40 by task poc/9388 CPU: 0 UID: 0 PID: 9388 Comm: poc Tainted: G W 7.1.0-rc7 #7 PREEMPT(lazy) Tainted: [W]=WARN Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 print_report+0x139/0x4ad mm/kasan/report.c:482 kasan_report+0xe4/0x1d0 mm/kasan/report.c:595 check_region_inline mm/kasan/generic.c:186 kasan_check_range+0x125/0x200 mm/kasan/generic.c:200 instrument_atomic_read_write include/linux/instrumented.h:112 atomic_sub_return_release include/linux/atomic/atomic-instrumented.h:326 __rcuref_put include/linux/rcuref.h:109 rcuref_put include/linux/rcuref.h:173 dst_release+0x5b/0x370 net/core/dst.c:168 refdst_drop include/net/dst.h:272 skb_dst_drop include/net/dst.h:284 skb_release_head_state+0x293/0x400 net/core/skbuff.c:1163 skb_release_all net/core/skbuff.c:1187 [..] Allocated by task 9391: kasan_save_stack+0x30/0x50 mm/kasan/common.c:57 kasan_save_track+0x14/0x30 mm/kasan/common.c:78 poison_kmalloc_redzone mm/kasan/common.c:398 __kasan_kmalloc+0x9a/0xb0 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 __do_kmalloc_node mm/slub.c:5296 __kmalloc_noprof+0x2f1/0x830 mm/slub.c:5308 kmalloc_noprof include/linux/slab.h:954 kzalloc_noprof include/linux/slab.h:1188 offload_action_alloc+0x2f/0x130 net/core/flow_offload.c:35 tcf_action_offload_add_ex+0x1ba/0x880 net/sched/act_api.c:258 tcf_action_offload_add net/sched/act_api.c:293 tcf_action_init+0x66e/0xa20 net/sched/act_api.c:1547 tcf_action_add+0xf6/0x5d0 net/sched/act_api.c:2101 [..] Freed by task 9391: kasan_save_stack+0x30/0x50 mm/kasan/common.c:57 kasan_save_track+0x14/0x30 mm/kasan/common.c:78 kasan_save_free_info+0x3b/0x70 mm/kasan/generic.c:584 poison_slab_object mm/kasan/common.c:253 __kasan_slab_free+0x6b/0x90 mm/kasan/common.c:285 kasan_slab_free include/linux/kasan.h:235 slab_free_hook mm/slub.c:2689 slab_free mm/slub.c:6251 kfree+0x21f/0x6b0 mm/slub.c:6566 tcf_action_offload_add_ex+0x4ad/0x880 net/sched/act_api.c:284 tcf_action_offload_add net/sched/act_api.c:293 tcf_action_init+0x66e/0xa20 net/sched/act_api.c:1547 tcf_action_add+0xf6/0x5d0 net/sched/act_api.c:2101 The buggy address belongs to the object at ffff88806158de00 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 64 bytes inside of freed 256-byte region [ffff88806158de00, ffff88806158df00) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff88806158d600 pfn:0x6158c head: order:1 mapcount:0 entire_map ---truncated--- | ||||
| CVE-2026-68400 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_ffa: Fix Endpoint Memory Access Descriptor offset calculation Use the descriptor's `ep_mem_offset` to calculate the start of the endpoint memory access array and to comply with the FF-A spec instead of defaulting to `sizeof(struct ffa_mem_region)`. This requires moving `ffa_mem_region_additional_setup()` earlier in the setup flow. Also, add sanity checks to ensure the calculated descriptor offsets do not exceed `max_fragsize`. | ||||
| CVE-2026-68405 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 4.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: free AP_VLAN bc_buf SKBs outside IRQ lock ieee80211_do_stop() removes AP_VLAN packets from the parent AP ps->bc_buf while holding ps->bc_buf.lock with IRQs disabled. It then calls ieee80211_free_txskb() before dropping the lock. ieee80211_free_txskb() is not just a passive SKB release. For SKBs with TX status state it can report a dropped frame through cfg80211/nl80211, and that path can reach netlink tap transmit. This is the same reason the pending queue cleanup in ieee80211_do_stop() already unlinks SKBs under the queue lock and frees them after IRQ state is restored. The buggy scenario involves two paths, with each column showing the order within that path: AP_VLAN management TX: AP_VLAN stop: 1. attach ACK-status state 1. clear the running state 2. queue a multicast SKB on 2. take ps->bc_buf.lock with IRQs parent ps->bc_buf disabled 3. unlink the AP_VLAN SKB 4. call ieee80211_free_txskb() Unlink matching AP_VLAN SKBs from ps->bc_buf under the existing lock, but move them to a local free queue. Drop the lock and restore IRQ state before calling ieee80211_free_txskb(). WARNING: kernel/softirq.c:430 at __local_bh_enable_ip | ||||