| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Automattic WooCommerce allows Blind SQL Injection.
This issue affects WooCommerce: from n/a before 11.0. |
| Improper OCSP response validation in the Snowflake Python, Go, JDBC, and Node.js drivers allowed a revoked TLS certificate to be accepted as valid, because OCSP responses were not reliably bound to the certificate being validated and definitive verification failures were treated as transient. A man-in-the-middle attacker holding a revoked certificate and its private key for a Snowflake or stage hostname could cause the driver to establish a TLS session to the attacker-controlled endpoint anyway, allowing the attacker to read and modify data transmitted within that connection. Successful exploitation requires that on-path position and the corresponding private key, and impact is limited to data carried within the intercepted connection. The fix is available in the patched versions listed above. Users must manually upgrade. |
| Apache Allura: stored XSS via SVN code repositories. Git repositories are not known to be affected. The vulnerability is likely mitigated via default CSP headers.
This issue affects Apache Allura: through 1.20.0.
Users are recommended to upgrade to version 1.21.0, which fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
ata: pata_sl82c105: fix bridge revision use-after-free
pci_get_slot() returns a referenced PCI device. Commit 44c10138fd4b
("PCI: Change all drivers to use pci_device->revision") replaced a
configuration-space read with direct access to the cached revision field,
but left that access after pci_dev_put(). The bridge may therefore be freed
before its revision is read.
Read the revision before dropping the reference. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: fp9931: Fix VPOS/VNEG voltage selector table
The VPOSNEG_table[] mapping does not match the FP9931 datasheet.
The datasheet defines the VPOS/VNEG voltage mapping as:
00h-04h -> 7.04V (-7.04V)
05h -> 7.26V (-7.26V)
06h -> 7.49V (-7.49V)
...
28h-3Fh -> 15.06V (-15.06V)
However, VPOSNEG_table[] has two issues:
1. Selector 0x00~0x04 should all map to 7.04V (5 entries), but the
table has 6 entries of 7.04V, causing all subsequent entries to be
shifted by one position.
2. Selectors 0x29~0x3F should all clamp to 15.06V (23 entries), but
the table has only 41 entries. Any selector value above 0x28
would result in an out-of-bounds table access.
Fix both issues by removing the duplicate 7.04V entry and appending
the missing 23 clamped 15.06V entries, bringing the table to the
correct size of 64 entries (0x00~0x3F). |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - fix F55 transmitter electrode count typo
During F55 sensor detection, the transmitter (TX) electrode count was
incorrectly assigned the value of the receiver (RX) electrode count
due to copy-paste typos.
This incorrect value was then propagated to the driver data and used
by F54 to determine the diagnostics report size. On devices with more
RX than TX electrodes, this inflated the perceived TX count, leading
to incorrect report size calculations and potential out-of-bounds
buffer accesses.
Fix the typos by correctly assigning the TX electrode counts. |
| Authorization Bypass Through User-Controlled Key vulnerability in sc Internet Vivoo WP Rentals allows Exploiting Incorrectly Configured Access Control Security Levels.
This issue affects WP Rentals: from n/a before 3.16.0. |
| Improper input validation of the auto-configuration account identifier in Snowflake JDBC Driver versions 4.2.0 through 4.3.3 allowed a credential-bearing login request to be redirected to an attacker-selected HTTPS endpoint. An attacker able to control the account value could cause the driver to transmit a reusable login credential to a host of their choosing and replay it to obtain the privileges granted to that credential. Successful exploitation requires an application using jdbc:snowflake:auto with a connections.toml section that omits an explicit host and a lower-trust principal able to set the account value; ordinary JDBC URLs are unaffected. The fix is available in Snowflake JDBC Driver version 4.3.4. Users must manually upgrade. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: WARN and clear role.invalid when creating a child shadow page
Explicitly clear role.invalid when deriving a child shadow page's role from
its parent to harden against bugs elsewhere in KVM, as violating KVM's
invariant that invalid pages are NOT on the list of active MMU pages leads
to use-after-free due to __kvm_mmu_prepare_zap_page() using list_add()
instead of list_move() when processing an invalid shadow page, i.e. makes a
bad situation far worse.
Yell loudly if the parent is invalid, as it means KVM has missed a validity
check, i.e. KVM is attempting to map memory using an invalid/obsolete root,
but continue on as the child is otherwise still a valid shadow page.
==================================================================
BUG: KASAN: slab-use-after-free in __kvm_mmu_get_shadow_page+0x1817/0x1860 [kvm]
Write of size 8 at addr ff11000153dd1368 by task repro/853
CPU: 1 UID: 1000 PID: 853 Comm: repro Not tainted 7.2.0-rc2-3aec122bdcaf-next-vm #5 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
<TASK>
dump_stack_lvl+0x4b/0x70
print_report+0x153/0x49c
kasan_report+0xbc/0xf0
__kvm_mmu_get_shadow_page+0x1817/0x1860 [kvm]
mmu_alloc_root+0x141/0x320 [kvm]
kvm_mmu_load+0x612/0x20f0 [kvm]
kvm_arch_vcpu_ioctl_run+0x3dd5/0x6150 [kvm]
kvm_vcpu_ioctl+0x5e4/0x10d0 [kvm]
__x64_sys_ioctl+0x131/0x1b0
do_syscall_64+0x67/0x5f0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
Allocated by task 853:
kasan_save_stack+0x20/0x40
kasan_save_track+0x14/0x30
__kasan_slab_alloc+0x5f/0x70
kmem_cache_alloc_noprof+0xfe/0x2e0
__kvm_mmu_topup_memory_cache+0x135/0x530 [kvm]
paging64_page_fault+0x318/0x1e30 [kvm]
kvm_mmu_do_page_fault+0x21d/0x630 [kvm]
kvm_mmu_page_fault+0x18c/0x17b0 [kvm]
kvm_arch_vcpu_ioctl_run+0x1f35/0x6150 [kvm]
kvm_vcpu_ioctl+0x5e4/0x10d0 [kvm]
__x64_sys_ioctl+0x131/0x1b0
do_syscall_64+0x67/0x5f0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Freed by task 853:
kasan_save_stack+0x20/0x40
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x43/0x70
kmem_cache_free+0xe2/0x400
kvm_mmu_commit_zap_page.part.0+0x1e2/0x310 [kvm]
kvm_mmu_free_roots+0x283/0x560 [kvm]
kvm_arch_vcpu_ioctl_run+0x33c8/0x6150 [kvm]
kvm_vcpu_ioctl+0x5e4/0x10d0 [kvm]
__x64_sys_ioctl+0x131/0x1b0
do_syscall_64+0x67/0x5f0
entry_SYSCALL_64_after_hwframe+0x4b/0x53 |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: ensure socket is owned by ovpn before deref sk_user_data
Some subsystems, like BPF SOCKMAP, set sk_user_data without
actually setting the encap_type.
For this reason, we must make sure that the type is the
one ovpn expects before dereferencing sk_user_data.
Failing to do so may lead to out-of-bounds reads. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: amba-pl011: synchronize DMA teardown
dmaengine_terminate_all() does not wait for a running callback, so the TX
callback can still touch the TX buffer after it is freed. The RX poll
timer reads the RX buffers without the port lock.
Switch to dmaengine_terminate_sync() and delete the RX timer before
freeing the buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: loongson2: Fix sg iteration in data reorder functions
In ls2k0500_mmc_reorder_cmd_data() and ls2k2000_mmc_reorder_cmd_data(),
the for_each_sg() macro already iterates over the scatterlist entries,
with 'sg' pointing to the current entry. However, the code incorrectly
uses '&sg[i]' and 'sg_dma_len(&sg[i])' inside the loop, which treats
'sg' as an array base and indexes it again, leading to access of
wrong sg entries (or out-of-bounds if the list is not an array). |
| In the Linux kernel, the following vulnerability has been resolved:
pmdomain: mediatek: fix remaining %pOF after of_node_put()
scpsys_get_bus_protection_legacy() looks up several legacy bus
protection regmaps from device-tree nodes.
Two error paths put the device node before checking whether the regmap
lookup failed, but still pass that node to dev_err_probe() with %pOF on
failure. If of_node_put() drops the last reference, the later %pOF
formatting can dereference a freed device node.
Keep the node reference until after the error message has been emitted in
the infracfg and SMI lookup paths. Also drop the SMI node before
returning when the SMI phandle is missing. |
| PagerDuty alarm hook transmits the integration routing key over cleartext HTTP.
PagerDuty serves this endpoint over HTTPS and will
normally answer plain HTTP with a redirect. That does not remove the exposure.
The initial POST -- including the JSON body containing the routing key -- is
written to the socket unencrypted before any redirect response is received.
Redirection affects only whether the request is retried securely, not whether
the first copy left the host in the clear.
This issue affects Apache SkyWalking: from 9.6.0 through 11.0.0.
Users are recommended to upgrade to version 11.0.0, which fixes the issue. |
| Apache Allura: exposure of non-public information via search.
This issue affects Apache Allura: through 1.20.0.
Users are recommended to upgrade to version 1.21.0, which fixes the issue. |
| ** UNSUPPORTED WHEN ASSIGNED ** Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Apache SkyWalking Booster UI.
This issue affects Apache SkyWalking UI : from 10.2.0 through 10.4.0.
Users are recommended to upgrade to Horizon UI 1.0.0, which fixes the issue. |
| Stored XSS via markdown HTML processing in Apache Allura.
This issue affects Apache Allura: from through 1.20.0.
Users are recommended to upgrade to version 1.21.0, which fixes the issue. |
| Improper certificate validation in Checkmk <2.5.0p10 allows a relay and a push agent that share the same UUID to reuse each other's mTLS certificate to authenticate against agent receiver endpoints in either direction, because the endpoints do not verify that the certificate was issued by their own root certificate. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Firmanet Software ERP allows SQL Injection.
This issue affects ERP: before 15.0.1. |
| Missing Authorization vulnerability in Kings Plugins MarketKing allows Exploiting Incorrectly Configured Access Control Security Levels.
This issue affects MarketKing: from n/a through 2.1.60. |
