| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
rust_binder: check ownership before using vma
When installing missing pages (or zapping them), Rust Binder will look
up the vma in the mm by address, and then call vm_insert_page (or
zap_page_range_single). However, if the vma is closed and replaced with
a different vma at the same address, this can lead to Rust Binder
installing pages into the wrong vma.
By installing the page into a writable vma, it becomes possible to write
to your own binder pages, which are normally read-only. Although you're
not supposed to be able to write to those pages, the intent behind the
design of Rust Binder is that even if you get that ability, it should not
lead to anything bad. Unfortunately, due to another bug, that is not the
case.
To fix this, store a pointer in vm_private_data and check that the vma
returned by vma_lookup() has the right vm_ops and vm_private_data before
trying to use the vma. This should ensure that Rust Binder will refuse
to interact with any other VMA. The plan is to introduce more vma
abstractions to avoid this unsafe access to vm_ops and vm_private_data,
but for now let's start with the simplest possible fix.
C Binder performs the same check in a slightly different way: it
provides a vm_ops->close that sets a boolean to true, then checks that
boolean after calling vma_lookup(), but this is more fragile
than the solution in this patch. (We probably still want to do both, but
the vm_ops->close callback will be added later as part of the follow-up
vma API changes.)
It's still possible to remap the vma so that pages appear in the right
vma, but at the wrong offset, but this is a separate issue and will be
fixed when Rust Binder gets a vm_ops->close callback. |
| A time-of-check time-of-use vulnerability in the Apex One/SEP agent could allow a local attacker to escalate privileges on affected installations.
Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. |
| Rsync version 3.4.2 and prior contain symlink race condition vulnerabilities in path-based system calls including chmod, lchown, utimes, rename, unlink, mkdir, symlink, mknod, link, rmdir, and lstat that allow local attackers to redirect operations to files outside the exported rsync module. Attackers with local filesystem access can exploit the timing window between path resolution and syscall execution by swapping symlinks to apply sender-supplied permissions, ownership, timestamps, or filenames to arbitrary files outside the intended module boundary on rsync daemons configured with 'use chroot = no'. |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup: fix race between task migration and iteration
When a task is migrated out of a css_set, cgroup_migrate_add_task()
first moves it from cset->tasks to cset->mg_tasks via:
list_move_tail(&task->cg_list, &cset->mg_tasks);
If a css_task_iter currently has it->task_pos pointing to this task,
css_set_move_task() calls css_task_iter_skip() to keep the iterator
valid. However, since the task has already been moved to ->mg_tasks,
the iterator is advanced relative to the mg_tasks list instead of the
original tasks list. As a result, remaining tasks on cset->tasks, as
well as tasks queued on cset->mg_tasks, can be skipped by iteration.
Fix this by calling css_set_skip_task_iters() before unlinking
task->cg_list from cset->tasks. This advances all active iterators to
the next task on cset->tasks, so iteration continues correctly even
when a task is concurrently being migrated.
This race is hard to hit in practice without instrumentation, but it
can be reproduced by artificially slowing down cgroup_procs_show().
For example, on an Android device a temporary
/sys/kernel/cgroup/cgroup_test knob can be added to inject a delay
into cgroup_procs_show(), and then:
1) Spawn three long-running tasks (PIDs 101, 102, 103).
2) Create a test cgroup and move the tasks into it.
3) Enable a large delay via /sys/kernel/cgroup/cgroup_test.
4) In one shell, read cgroup.procs from the test cgroup.
5) Within the delay window, in another shell migrate PID 102 by
writing it to a different cgroup.procs file.
Under this setup, cgroup.procs can intermittently show only PID 101
while skipping PID 103. Once the migration completes, reading the
file again shows all tasks as expected.
Note that this change does not allow removing the existing
css_set_skip_task_iters() call in css_set_move_task(). The new call
in cgroup_migrate_add_task() only handles iterators that are racing
with migration while the task is still on cset->tasks. Iterators may
also start after the task has been moved to cset->mg_tasks. If we
dropped css_set_skip_task_iters() from css_set_move_task(), such
iterators could keep task_pos pointing to a migrating task, causing
css_task_iter_advance() to malfunction on the destination css_set,
up to and including crashes or infinite loops.
The race window between migration and iteration is very small, and
css_task_iter is not on a hot path. In the worst case, when an
iterator is positioned on the first thread of the migrating process,
cgroup_migrate_add_task() may have to skip multiple tasks via
css_set_skip_task_iters(). However, this only happens when migration
and iteration actually race, so the performance impact is negligible
compared to the correctness fix provided here. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix runtime suspend deadlock when there is pending job
The runtime suspend callback drains the running job workqueue before
suspending the device. If a job is still executing and calls
pm_runtime_resume_and_get(), it can deadlock with the runtime suspend
path.
Fix this by moving pm_runtime_resume_and_get() from the job execution
routine to the job submission routine, ensuring the device is resumed
before the job is queued and avoiding the deadlock during runtime
suspend. |
| Undefined behavior may result due to a race condition leading to a use-after-free violation. If BIND receives an incoming DNS message signed with SIG(0), it begins work to validate that signature. If, during that validation, the "recursive-clients" limit is reached (as would occur during a query flood), and that same DNS message is discarded per the limit, there is a brief window of time while the SIG(0) validation may attempt to read the now-discarded DNS message.
This issue affects BIND 9 versions 9.20.0 through 9.20.22, 9.21.0 through 9.21.21, and 9.20.9-S1 through 9.20.22-S1.
BIND 9 versions 9.18.28 through 9.18.49 and 9.18.28-S1 through 9.18.49-S1 are NOT affected. |
| In the Linux kernel, the following vulnerability has been resolved:
nfs: return EISDIR on nfs3_proc_create if d_alias is a dir
If we found an alias through nfs3_do_create/nfs_add_or_obtain
/d_splice_alias which happens to be a dir dentry, we don't return
any error, and simply forget about this alias, but the original
dentry we were adding and passed as parameter remains negative.
This later causes an oops on nfs_atomic_open_v23/finish_open since we
supply a negative dentry to do_dentry_open.
This has been observed running lustre-racer, where dirs and files are
created/removed concurrently with the same name and O_EXCL is not
used to open files (frequent file redirection).
While d_splice_alias typically returns a directory alias or NULL, we
explicitly check d_is_dir() to ensure that we don't attempt to perform
file operations (like finish_open) on a directory inode, which triggers
the observed oops. |
| A time-of-check time-of-use (TOCTOU) condition in the ad_flush function in Netatalk 3.0.0 through 4.4.2 involves root-privileged file operations, which may allow a remote attacker to cause limited data modification under specific race conditions. |
| NLnet Labs Unbound 1.14.0 up to and including version 1.25.0 has a locking inconsistency vulnerability that when certain conditions are met (multi-threaded, RPZ XFR reload, RPZ zone with 'rpz-nsip'/'rpz-nsdname' triggers) it could result in heap use-after-free and eventual crash. An adversary can exploit the vulnerability if conditions are first met on a vulnerable Unbound, i.e., multi-threaded, an RPZ zone with 'rpz-nsip'/'rpz-nsdname' triggers and an ongoing XFR for that RPZ zone. Local RPZ files do not trigger the vulnerability. If the timing is right and an XFR happens at the same time another thread needs to read that RPZ zone, the reader may not hold the lock long enough and the thread applying the XFR may free objects that the reader is about to walk causing the use-after-free. Unbound 1.25.1 contains a patch with a fix to the locking code. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: yurex: fix race in probe
The bbu member of the descriptor must be set to the value
standing for uninitialized values before the URB whose
completion handler sets bbu is submitted. Otherwise there is
a window during which probing can overwrite already retrieved
data. |
| In the Linux kernel, the following vulnerability has been resolved:
mctp: route: hold key->lock in mctp_flow_prepare_output()
mctp_flow_prepare_output() checks key->dev and may call
mctp_dev_set_key(), but it does not hold key->lock while doing so.
mctp_dev_set_key() and mctp_dev_release_key() are annotated with
__must_hold(&key->lock), so key->dev access is intended to be
serialized by key->lock. The mctp_sendmsg() transmit path reaches
mctp_flow_prepare_output() via mctp_local_output() -> mctp_dst_output()
without holding key->lock, so the check-and-set sequence is racy.
Example interleaving:
CPU0 CPU1
---- ----
mctp_flow_prepare_output(key, devA)
if (!key->dev) // sees NULL
mctp_flow_prepare_output(
key, devB)
if (!key->dev) // still NULL
mctp_dev_set_key(devB, key)
mctp_dev_hold(devB)
key->dev = devB
mctp_dev_set_key(devA, key)
mctp_dev_hold(devA)
key->dev = devA // overwrites devB
Now both devA and devB references were acquired, but only the final
key->dev value is tracked for release. One reference can be lost,
causing a resource leak as mctp_dev_release_key() would only decrease
the reference on one dev.
Fix by taking key->lock around the key->dev check and
mctp_dev_set_key() call. |
| VMware Fusion contains a TOCTOU (Time-of-check Time-of-use) vulnerability that occurs during an operation performed by a SETUID binary. A malicious actor with local non-administrative user privileges may exploit this vulnerability to escalate privileges to root on the system where Fusion is installed. |
| AGL app-framework-main thru 17.1.12 contains a Zip Slip path traversal vulnerability (CWE-22) combined with a TOCTOU race condition (CWE-367) in the widget installation flow. The is_valid_filename function in wgtpkg-zip.c validates ZIP entry names but does not check for dot notation directory traversal sequences it only blocks absolute paths. The zread extraction function uses openat(workdirfd, filename, O_CREAT) which resolves dot notation values relative to the work directory, allowing files to be written anywhere on the filesystem. Critically, in function install_widget in file wgtpkg-install.c, extraction via zread occurs BEFORE signature verification via check_all_signatures. Even if signature verification fails, the error cleanup (remove_workdir) only deletes the temporary work directory files written outside via path traversal persist permanently. |
| Gotenberg is a Docker-powered stateless API for PDF files. Prior to 8.32.0, FilterOutboundURL resolves the hostname, checks the resolved IPs against the private-address deny-list, and returns only the error. It discards the resolved addresses. Chromium later performs its own DNS resolution when it navigates to the URL. An attacker who controls DNS for a hostname with a short TTL returns a public IP on the first query (Gotenberg allows) and a private IP on the second query (Chromium connects to the attacker-chosen internal address). The CDP Fetch.requestPaused handler re-checks the URL but runs its own DNS resolution, leaving a timing window before Chromium's actual TCP connect. The rendered internal service response returns to the caller as a PDF. This vulnerability is fixed in 8.32.0. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: dummy-hcd: Fix locking/synchronization error
Syzbot testing was able to provoke an addressing exception and crash
in the usb_gadget_udc_reset() routine in
drivers/usb/gadgets/udc/core.c, resulting from the fact that the
routine was called with a second ("driver") argument of NULL. The bad
caller was set_link_state() in dummy_hcd.c, and the problem arose
because of a race between a USB reset and driver unbind.
These sorts of races were not supposed to be possible; commit
7dbd8f4cabd9 ("USB: dummy-hcd: Fix erroneous synchronization change"),
along with a few followup commits, was written specifically to prevent
them. As it turns out, there are (at least) two errors remaining in
the code. Another patch will address the second error; this one is
concerned with the first.
The error responsible for the syzbot crash occurred because the
stop_activity() routine will sometimes drop and then re-acquire the
dum->lock spinlock. A call to stop_activity() occurs in
set_link_state() when handling an emulated USB reset, after the test
of dum->ints_enabled and before the increment of dum->callback_usage.
This allowed another thread (doing a driver unbind) to sneak in and
grab the spinlock, and then clear dum->ints_enabled and dum->driver.
Normally this other thread would have to wait for dum->callback_usage
to go down to 0 before it would clear dum->driver, but in this case it
didn't have to wait since dum->callback_usage had not yet been
incremented.
The fix is to increment dum->callback_usage _before_ calling
stop_activity() instead of after. Then the thread doing the unbind
will not clear dum->driver until after the call to
usb_gadget_udc_reset() safely returns and dum->callback_usage has been
decremented again. |
| A race condition in the MxGPU-Virtualization driver’s ioctl path caused by concurrent unsynchronized access to the global variable amdgv_cmd in an unlocked ioctl handler could be exploited by an attacker to trigger a heap-based buffer overflow, potentially resulting in denial-of-service within the vulnerable system context. |
| In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Fix kthread worker destruction in polling mode
Fix the cleanup order in polling mode (irq < 0) to prevent kernel warnings
during module removal. Cancel the hrtimer before destroying the kthread
worker to ensure work queues are empty.
In polling mode, the driver uses hrtimer to periodically trigger
wave5_vpu_timer_callback() which queues work via kthread_queue_work().
The kthread_destroy_worker() function validates that both work queues
are empty with WARN_ON(!list_empty(&worker->work_list)) and
WARN_ON(!list_empty(&worker->delayed_work_list)).
The original code called kthread_destroy_worker() before hrtimer_cancel(),
creating a race condition where the timer could fire during worker
destruction and queue new work, triggering the WARN_ON.
This causes the following warning on every module unload in polling mode:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 1034 at kernel/kthread.c:1430
kthread_destroy_worker+0x84/0x98
Modules linked in: wave5(-) rpmsg_ctrl rpmsg_char ...
Call trace:
kthread_destroy_worker+0x84/0x98
wave5_vpu_remove+0xc8/0xe0 [wave5]
platform_remove+0x30/0x58
...
---[ end trace 0000000000000000 ]--- |
| n8n-MCP is an MCP server that provides AI assistants access to n8n node documentation, properties, and operations. From version 2.18.7 to before version 2.50.2, there is an authenticated server-side request forgery vulnerability affecting the webhook trigger tools, the n8n API client (N8N_API_URL), and per-request URLs supplied via the x-n8n-url header in multi-tenant HTTP mode. This issue has been patched in version 2.50.2. |
| Use after free in Windows Cloud Files Mini Filter Driver allows an authorized attacker to elevate privileges locally. |
| csync2 uses insecure temporary directories when compiled with C99 or later, allowing for TOCTOU style attacks on the temporary directories. |
