| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A security flaw has been discovered in Eleveo Call Recording Software 9.7.0. Impacted is an unknown function of the file /callrec/audio.jsp of the component Call Recording Handler. The manipulation of the argument callId results in improper authorization. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to 6.9.10, the fix for CVE-2026-45367 incompletely patched the DSTU2 module, leaving FHIRPathEngine.matches() in org.hl7.fhir.dstu2/utils/FHIRPathEngine.java to call raw String.matches(sw) without RegexTimeout protection while replaceMatches() was updated, allowing an unauthenticated attacker to trigger catastrophic regex backtracking and exhaust server CPU. This issue is fixed in version 6.9.10. |
| HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to 6.9.10, org.hl7.fhir.utilities.XsltUtilities saxonTransform(...) overloads instantiated a bare net.sf.saxon.TransformerFactoryImpl() without ACCESS_EXTERNAL_DTD or ACCESS_EXTERNAL_STYLESHEET restrictions, allowing an attacker who controls or can tamper with transformed XML to trigger XML External Entity injection for local file disclosure and blind XXE or SSRF to arbitrary URLs reachable from the host. This issue is fixed in version 6.9.10. |
| A Return of Pointer Value Outside of Expected Range vulnerability in the fileio library of Juniper Networks Junos OS and Junos OS Evolved allows a local, low-privilged attacker to cause a Denial-of-Service (DoS).
On EX Series, QFX Series and MX Series a low-privileged attacker issuing a specific 'show l2-learning' or 'show ethernet-switching' command will cause an l2ald crash which will lead to a temporary service impact for all layer 2 services until the process has automatically restarted.
This issue affects EX Series, QFX Series, MX Series:
Junos OS:
* all versions before 23.2R2-S7,
* 23.4 versions before 23.4R2-S7,
* 24.2 versions before 24.2R2,
* 24.4 versions before 24.4R1-S2.
Junos OS Evolved:
* all versions before 23.2R2-S7-EVO,
* 23.4 versions before 23.4R2-S8-EVO,
* 24.2 versions before 24.2R2-EVO,
* 24.4 versions before 24.4R1-S3-EVO. |
| A flaw has been found in HdrHistogram up to 2.2.2. This affects the function org.HdrHistogram.AbstractHistogram.decodeFromByteBuffer of the file src/main/java/org/HdrHistogram/AbstractHistogram.java. This manipulation of the argument numberOfSignificantValueDigits causes uncontrolled memory allocation. The attack can only be executed locally. The exploit has been published and may be used. The actual existence of this vulnerability is currently in question. This issue is disputed due to the potential lack of crossing of security boundaries and the pre-requisites for a successful attack. |
| A vulnerability was found in HdrHistogram up to 2.2.2. This issue affects the function org.HdrHistogram.DoubleHistogram.recordValue of the file src/main/java/org/HdrHistogram/DoubleHistogram.java of the component Range Check. Performing a manipulation results in incorrect comparison. The attack is only possible with local access. The exploit has been made public and could be used. The presence of this vulnerability remains uncertain at this time. This issue is disputed due to the potential lack of crossing of security boundaries and the pre-requisites for a successful attack. |
| Heap-based buffer overflow in Microsoft Office Excel allows an unauthorized attacker to execute code locally. |
| Integer overflow or wraparound in Windows Terminal allows an unauthorized attacker to execute code locally. |
| Heap-based buffer overflow in Microsoft Office Excel allows an unauthorized attacker to execute code locally. |
| A user with Editor permissions can craft a dashboard whose table (TableNG) panel contains a malicious field name that executes as a script in the browser of any user who views the dashboard (stored cross-site scripting). |
| A SQL Injection vulnerability exists in Apache Fineract's Report Execution API (runreports endpoint) in versions up to and including 1.14.0. Report parameter values are incorporated into the generated SQL query without sufficient validation, allowing an authenticated user with permission to run reports to inject arbitrary SQL via crafted parameter values. This can be leveraged to perform unauthorized access to data beyond what the report was designed to expose. Users are recommended to upgrade to a version containing the fix. |
| The Zephyr ADIN2111/ADIN1110 10BASE-T1S/T1L Ethernet driver (drivers/ethernet/eth_adin2111.c) reassembles received Ethernet frames in OPEN Alliance (OA) SPI mode by copying device-supplied 64-byte data chunks into a fixed static buffer ctx->buf of size CONFIG_ETH_ADIN2111_BUFFER_SIZE (default 1524 bytes). In eth_adin2111_oa_data_read(), each valid chunk was memcpy'd into ctx->buf[ctx->scur] and the write cursor scur advanced, with no check that scur + len stayed within the buffer. The number of chunks (up to 255, from the BUFSTS RCA field) and the per-chunk length are taken entirely from the frame data received off the wire; the cursor is only reset on a start-of-frame chunk. An attacker on the single-pair Ethernet segment can therefore send a frame whose reassembled size exceeds the configured buffer, causing the driver's RX offload thread to write attacker-controlled frame bytes past the end of the static buffer into adjacent driver/kernel memory (up to roughly 14.8 KB in the worst case). This is a remotely/adjacently reachable out-of-bounds write (CWE-787) that can corrupt memory and cause denial of service or potentially code execution. The defect was introduced when OA SPI support was added (commit 0ca8b0756b1) and shipped in releases v3.7.0 through v4.4.0. The fix adds a bounds check that drops the oversized frame and resets the cursor before the copy. |
| NocoBase is an AI-powered no-code/low-code platform for building business applications and enterprise solutions. Prior to 2.0.61, NocoBase @nocobase/plugin-notification-in-app-message exposed GET /api/myInAppChannels:list, where the filter[latestMsgReceiveTimestamp][$lt] value was inserted into a Sequelize.literal() template string without escaping or parameter binding, allowing a signed-up authenticated user to run stacked PostgreSQL statements and potentially execute commands with COPY ... TO PROGRAM. This vulnerability is fixed in 2.0.61. |
| ImageMagick before 7.1.2-26 and 6.9.13-51 contains a memory leak in the hough lines operation: when a specific operation fails, a small memory leak occurs. |
| In Splunk Enterprise versions below 10.4.1, 10.2.5, 10.0.8, and 9.4.13, and Splunk Cloud Platform versions below 10.5.2605.0, 10.4.2604.7, 10.3.2512.16, 10.2.2510.18, and 10.1.2507.24, an attacker could trick a user that holds a role with the `list_deployment_server` capability into running arbitrary Search Processing Language (SPL) searches on their behalf as `splunk-system-user`, allowing for access to stored credentials and indexed data.<br><br>The vulnerability is possible because Deployment Server endpoints in Splunk Web do not validate Cross-Site Request Forgery (CSRF) tokens on GET requests, and caller-supplied input is not correctly neutralized before it is placed into an SPL search. |
| Dashy is a self-hostable personal dashboard. Prior to 4.0.8, Dashy deployments using OIDC can allow unauthenticated users or non-admin authenticated users to write changes to the main config.yaml through the config-saving functionality despite configured permissions, allowing unauthorized modification of dashboard configuration and potential service disruption. This issue is fixed in version 4.0.8. |
| A
security flaw was found in certain NETGEAR Orbi models that
could allow an unauthorized user to cause the device to stop responding or
restart unexpectedly, disrupting network connectivity and making the device
temporarily unavailable. |
| A boolean-based SQL Injection vulnerability exists in Apache Fineract's Client Search API (GET /api/v1/clients) in versions up to and including 1.14.0. The orderBy and sortOrder request parameters are concatenated into a SQL query without sufficient validation, allowing an authenticated user with permission to view clients to inject arbitrary SQL via a crafted orderBy value. This can be leveraged to perform blind boolean-based data extraction and, on MySQL/MariaDB, to disclose arbitrary files readable by the database process via the LOAD_FILE() function. Users are recommended to upgrade to a version containing the fix |
| ImageMagick before 7.1.2-26 and 6.9.13-51 contains an information disclosure vulnerability: when a profile is displayed with the identify command and the profile value is not printable, a single byte at the end of the profile can be printed (read past the profile boundary). This behavior occurs when debug output is enabled. |
| OpenClaw versions 2026.3.22 before 2026.6.6 contain an authorization bypass vulnerability where WhatsApp group IDs can satisfy elevated sender allowlists. Attackers with lower-trust access can perform actions requiring stronger authorization by leveraging group ID validation in the affected feature. |
