| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix missing kunmap in afs_dir_search_bucket()
Fix afs_dir_search_bucket() to kunmap the block it's using in the "bad:"
path. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix double-unmap of directory block
Fix afs_edit_dir_remove() to use a cleanup function to unmap the block
pointed to by afs_dir_iter::block if it's left pointing to something rather
than manually kunmapping the blocks. Manually kunmapping without clearing
iter.blocks can result in a double-kunmap if afs_dir_find_block() is called
twice in a row (which would be the case if the block being modified is not
first in the hash chain). |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix incorrect free in candidate cleanup in afs_lookup_server()
Fix afs_lookup_server() to not free an existing server's endpoint state
when cleaning up a candidate server. The candidate record doesn't have an
endpoint state yet at this point, so the free for that can just be removed. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Clear stale peer app data after address list changes
afs_fs_probe_fileserver() fetches the current endpoint state under
server->fs_lock, but leaves old_alist as NULL. Consequently,
afs_set_peer_appdata() treats every address list replacement as initial
setup and only binds the new peers; it never unbinds peers removed from
the old list.
An address refresh can therefore proceed as follows. CPU 0 replaces
server S's list and drops Pold without clearing Pold->app_data. The
server destroyer then clears only S's current peers and lets S reach its
RCU callback. After the callback frees S, CPU 1 handles a callback
through an RxRPC connection that still pins Pold, reads Pold->app_data,
and calls afs_use_server() on the freed object.
KASAN reported:
BUG: KASAN: slab-use-after-free in afs_find_server+0x3c/0xa0
Read of size 4 at addr ffff8881013e1af0 by task krxrpcio/7001/74
Call Trace:
afs_find_server+0x3c/0xa0
afs_rx_new_call+0x15c/0x390
rxrpc_new_incoming_call+0x97c/0x1730
rxrpc_input_packet.constprop.0+0xd03/0xec0
rxrpc_io_thread+0x967/0x1640
Allocated by task 93:
afs_lookup_server+0x1a7/0x14c0
afs_alloc_server_list+0x43f/0xb60
afs_create_volume+0x923/0x1490
afs_get_tree+0x1c6/0x10a0
Freed by task 0:
kfree+0x131/0x3c0
rcu_core+0x50a/0x1850
Last potentially related work creation:
__call_rcu_common.constprop.0+0x71/0xa10
afs_put_server+0x213/0x2b0
Preserve old->addresses for the peer app-data update so that removed
peers are cleared before the endpoint state is replaced. Also advance
both cursors when the old and new lists share a peer; activating the
old/new comparison without this would otherwise loop forever on the
shared entry. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (gpio-fan) Fix use-after-free in alarm work
fan_alarm_irq_handler() queues fan_data->alarm_work, but nothing
cancels it. fan_alarm_notify() dereferences fan_data and its hwmon
device. On unbind, devres frees the interrupt, which only waits for
the handler itself, and then releases the hwmon device and fan_data,
so a pending fan_alarm_notify() can run after those frees.
Replace INIT_WORK() with devm_work_autocancel(), registered before
devm_request_irq(). The devres cleanup then frees the interrupt
first, so no new work can be queued, and cancels the work while
fan_data and the hwmon device are still alive.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: bound AV1 tile-start copy to the array capacity
vdec_av1_slice_setup_tile() copies tile_cols + 1 / tile_rows + 1 entries
into mi_col_starts[] / mi_row_starts[] from the bitstream tile_info. Bound
the copy to the array capacity. |
| In the Linux kernel, the following vulnerability has been resolved:
media: verisilicon: rockchip: guard VPU981 AV1 divisor and tile buffer
rockchip_vpu981_av1_dec_set_tile_info() divides context_update_tile_id by
tile_info->tile_cols and writes one descriptor per tile into the tile_info
DMA buffer, which holds AV1_MAX_TILES entries; tile_cols and tile_rows
come from the bitstream. Guard the division against a zero tile_cols by
initialising the context-update values to zero and computing them only
when tile_cols is non-zero, and stop the descriptor writes once the
tile_info buffer is full. The tile geometry written to the hardware
registers is left unmodified; the per-dimension and total tile bounds are
enforced by the control validation. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Don't free the live ring's TPA state on queue restart failure
bnxt_queue_mem_alloc() shallow copies the live RX ring into the clone:
memcpy(clone, rxr, sizeof(*rxr));
the code currently clears pointers that the clone owns (such as
rx_agg_bmap), but rx_tpa and rx_tpa_idx_map are left pointing at memory
of the live ring that was cloned.
If an allocation failure happens later and the err_free_tpa_info label
is taken, the live ring's memory can be freed while still in use.
Fix this by initializing the clone's pointers to NULL to prevent live
ring state from being freed inadvertently. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Handle buffer allocation failure in bnxt_rx_ring_reset()
bnxt_rx_ring_reset() frees the ring buffers and then reallocates them,
ignoring the result.
bnxt_alloc_one_rx_ring() can fail in bnxt_alloc_one_tpa_info_data(), which
returns -ENOMEM on the first failed allocation and leaves the remaining
rxr->rx_tpa[] entries zeroed.
The error isn't propagated up, so the loop in bnxt_rx_ring_reset
continues and at the end the code re-enables TPA with partially
unallocated rx_tpa array.
This means that when the agg_id from hardware is mapped to a SW index in
rxr->rx_tpa[], an uninitialized slot can be chosen which would hand a
zero DMA address to the device.
Fix this by falling back to a global reset, which is what the existing
code already does when other functions fail, but unlike the other
failure cases this particular failure has to return because TPA can't
be re-enabled since the allocation failed. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Propagate RX ring init failures in bnxt_init_nic()
bnxt_init_rx_rings() returns an error when bnxt_alloc_one_rx_ring()
fails, but bnxt_init_nic() discards that return value and calls
bnxt_init_chip(), which enables TPA.
If an allocation fails, this could leave rxr->rx_tpa[] partially zeroed
and TPA would be enabled over an array with zeroed entries. This would
lead to a zeroed DMA address being handed out if the agg_idx is
translated to a SW index at a zeroed entry.
Fix this by propagating the error out of bnxt_init_nic(). Both callers
already check its return value and unwind with bnxt_free_skbs() and
bnxt_free_mem(), which tolerate a partially initialized RX ring. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Propagate TPA buffer allocation failures in bnxt_queue_mem_alloc()
bnxt_alloc_one_tpa_info_data() returns -ENOMEM as soon as one allocation
fails. This leaves the remaining rxr->rx_tpa[] entries zeroed.
bnxt_queue_mem_alloc() discards that return value, so the partially
initialized ring is installed by bnxt_queue_start().
Since the agg_id is picked by the hardware and bnxt_alloc_agg_idx maps
it to a SW index in rxr->rx_tpa[], it is possible that an uninitialized
slot can be chosen which would hand a zero DMA address to the device.
Fix this by checking the return value of bnxt_alloc_one_tpa_info_data
and unwinding, freeing the ring buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Prevent queue stop with deferred completions
When the driver receives a burst of packets, it can mark a BD with the
NO_CMPL bit to defer completions. The expectation is that the last
packet in the ring will have this bit unset and the completion generated
by that packet will cleanup that packet and the ones preceding it. This
helps to reduce the number of completions fired.
The suppressed completions are controlled by the driver and the number
of packets with suppressed completions scales with the size of the ring.
SW USO packets, on the other hand, have an upper bound on the maximum
number of BDs which can be consumed which does not scale with the ring
size.
So, for small rings it is possible that: a burst of packets is handed to
the driver, the driver defers completions for all of the packets because
the number of free descriptors stays above the threshold in the driver.
Then, a USO packet arrives, but the number of BDs available is not
enough and the USO code exits early.
In this case, you end up in a state where the ring is full of packets
with their completions suppressed, which can cause the queue to stop and
never be restarted.
Assuming default CONFIG_MAX_SKB_FRAGS, this is only possible for small
rings (<= 457 descriptors, below the driver default value) when
a burst of packets fills the ring, followed by a large USO packet that
can't fit. For larger rings, the delta between the completion
suppression threshold and the BDs required for SW USO is large enough
that completions will fire and this case is unreachable.
This issue was pointed out by Sashiko and while it seems fairly unlikely
given that the queue size must be small to trigger this, it is indeed
possible.
Fix this by tracking the last BD which deferred completions and
centralizing the logic for deciding when to ring the doorbell. The NO_CMPL
bit is now cleared in bnxt_txr_db_kick(), so every doorbell site is
covered, including the SW USO early exit. This guarantees the ring always
ends in a BD which generates a completion to clean it and wake the queue. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: syncookies: remember the request backup flag
Instead of using an uninitialised bit when copying the info in
subflow_ulp_clone().
To fix this, no need to extend the join_entry structure: backup is
coming from struct mptcp_subflow_request_sock, only one bit. Do the same
here by using one bit for both. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: kernel: drop pending ADD_ADDR when removing ID0
The in-kernel MPTCP path manager can leave a stale ADD_ADDR announcement
entry alive when removing the id 0 endpoint. This happens because the id 0
removal path does not tear down pending announcements, unlike the non-zero
id path.
When the PM later reselects id 0 after adding another signal endpoint, it
finds the stale anno_list entry and hits WARN_ON_ONCE(mptcp_pm_is_kernel())
in mptcp_pm_announced_alloc().
Root cause: asymmetry between removal paths.
- Non-zero id path: mptcp_nl_remove_subflow_and_signal_addr() calls
mptcp_pm_remove_announced() to clean up.
- Id 0 path: mptcp_nl_remove_id_zero_address() skips cleanup entirely.
Fix by making the id 0 path symmetric: call mptcp_pm_announced_remove()
and decrement add_addr_signaled before queuing the RM_ADDR.
Subtle detail: signal endpoints are stored in anno_list with port 0, but
msk_local carries the connection's local port. In other words, entries
linked to ID0 paths should have port == 0. A follow-up patch will ensure
that. mptcp_pm_announced_remove() uses use_port=true for comparison. So
clear the port before the lookup. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: reject out-of-bounds DataOffset in CIFSSMBRead()
The SMB1 synchronous read helper CIFSSMBRead() validates the server's
DataLength against CIFSMaxBufSize and the caller's count, but never
validates DataOffset. The copy source is formed as
&pSMBr->hdr.Protocol + le16_to_cpu(pSMBr->DataOffset)
and memcpy()'d for DataLength bytes with no check that the
[DataOffset, DataOffset + DataLength) range lies within the response
actually received from the server.
A malicious or compromised SMB1 server can return a response carrying
an in-range DataLength and a large DataOffset, driving the source
pointer past the end of the response buffer. The memcpy() then copies
adjacent kernel heap into the caller's read buffer (information
disclosure), or reads unmapped memory and oopses (denial of service).
SMB1 is not negotiated by default; reaching this code requires an
explicit vers=1.0 mount.
Both DataOffset and the received response length recorded in
rsp_iov.iov_len are relative to the start of the SMB header, so reject
the response unless DataOffset + DataLength fits within that length,
using overflow-safe arithmetic, before forming the source pointer.
The response length has been validated by the previous patch, so the
DataOffset and DataLength fields can be read safely here.
While here, make data_length unsigned. It holds a length derived from
unsigned on-the-wire fields and is only ever compared against unsigned
quantities; print it with %u accordingly, and add __func__ to the
cifs_dbg() calls in this function. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: honor forceuid/forcegid when mapping SIDs to uid/gid
When the administrator mounts with forceuid or forcegid (uid=/gid=
mount options), they expect all files to appear owned by the specified
user/group. However, several code paths unconditionally called
sid_to_id() to overwrite cf_uid/cf_gid with server-provided values,
ignoring the administrator's explicit override:
- smb311_posix_info_to_fattr() (stat via POSIX extensions)
- cifs_posix_to_fattr() (readdir via POSIX extensions)
- parse_sec_desc() (CIFS ACL ownership mapping)
This allowed an untrusted server to dictate local file ownership even
when the mount was configured to force specific uid/gid values.
Fix all three call sites to check CIFS_MOUNT_OVERR_UID and
CIFS_MOUNT_OVERR_GID before calling sid_to_id(), following the
same pattern already used by cifs_unix_basic_to_fattr() for unix
extensions. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix one-byte OOB read in smb2_parse_native_symlink()
When parsing a share-root relative native symlink, memcpy copies
smb_target+1 (skipping the leading separator) but uses
strlen(smb_target)+1 as the length, reading one byte past the
allocated buffer.
This fixes the following KASAN splat when accessing an SMB symlink
with a target of '\a\b':
BUG: KASAN: slab-out-of-bounds in smb2_parse_native_symlink+0x4f5/0xca0
Read of size 5 at addr ffff88800878fe21 by task netfsfuzz-execu/1
CPU: 1 UID: 0 PID: 1 Comm: netfsfuzz-execu Tainted: G N
7.2.0-11943-g2709dd5ae32f-dirty #1 PREEMPT(lazy)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix,
1996)
Call Trace:
<TASK>
dump_stack_lvl+0x7b/0xa0
print_report+0xd0/0x630
kasan_report+0xe5/0x120
kasan_check_range+0x105/0x1b0
__asan_memcpy+0x23/0x60
smb2_parse_native_symlink+0x4f5/0xca0
parse_reparse_point+0x68a/0x1530
reparse_info_to_fattr+0x752/0xa20
cifs_get_fattr+0x873/0x15b0
cifs_get_inode_info+0xc0/0x310
cifs_lookup+0x308/0xa70
__lookup_slow+0x122/0x2b0
lookup_slow+0x50/0x70
path_lookupat+0x525/0xaf0
filename_lookup+0x1f2/0x550
vfs_statx+0xd1/0x1a0
vfs_fstatat+0x65/0xc0
__do_sys_newfstatat+0x9a/0x120
do_syscall_64+0xdd/0x4a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix cifsFileInfo reference leak in deferred close
When cifs_close() defers a close, it hands the cifsFileInfo reference
of the closing struct file to the queued work. Each execution of
smb2_deferred_work_close() drops one such reference.
deferred_close_scheduled can be false while the work is pending: the
workqueue clears PENDING when the callback starts to run, before the
callback clears the flag under deferred_lock. A close in that
interval requeues the running work, and the callback then clears the
flag, leaving the requeued work pending with the flag down. A later
cifs_open() can reuse the handle and its cifs_close() reaches the
same branch: queue_delayed_work() fails because the work is still
pending, but cifs_close() returns without dropping the closing file's
reference. The cifsFileInfo count stays pinned and its tlink, dentry
and server handle are leaked.
Check the return value and hand off the reference only when work was
actually queued. Otherwise, use the shared _cifsFileInfo_put(), like
the mod_delayed_work() branch above: the pending execution already
owns its reference.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: avoid leaking refcount in cifs_queue_oplock_break()
cifs_queue_oplock_break() unconditionally takes a reference on the
target file before queueing cifs_oplock_break(). Only that work item
decreases the reference counter again.
If another oplock break arrives while that work is still queued,
queue_work() will return false and not queue this second work item. As a
result, we will never reach the point to drop the file reference again
and are leaking this reference. This can be triggered when interacting
with a slow-responding server.
As a result, later unmount operations for this file system will fail with
BUG: Dentry ... still in use (1) [unmount of cifs cifs]
VFS: Busy inodes after unmount of cifs (cifs)
kernel BUG at fs/super.c:777!
Fix this by only incrementing the reference count if the work has been
queued successfully. Taking it after queue_work() is safe because all
three callers hold tcon->open_file_lock across the call and
_cifsFileInfo_put() decrements under that same lock, so a worker that
starts the handler in the window cannot drop the reference before it has
been taken. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: avoid leaking refcount when cifs_sb_tlink() fails
cifs_oplock_break() takes over the reference that
cifs_queue_oplock_break() acquired when it queued the work, and drops it
with _cifsFileInfo_put() once the break has been processed.
Only in setups with "-o multiuser", cifs_sb_tlink() may fail, at which
point cifs_oplock_break() returns without putting the file reference,
mirroring the reference leak we already fixed in the companion patch to
cifs_queue_oplock_break().
This would trigger a crash due to busy inodes on the next unmount:
BUG: Dentry ... still in use (1) [unmount of cifs cifs]
VFS: Busy inodes after unmount of cifs (cifs)
Drop the reference on that path as well. Doing so before the out label
mirrors the normal path, which also puts the reference before
cifs_done_oplock_break().
Found by Sashiko code review. The failure path was not exercised at
runtime. |
