| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix RCU stall while reaping monitor destination ring
While processing the monitor destination ring, MSDUs are reaped from the
link descriptor based on the corresponding buf_id.
However, sometimes the driver cannot obtain a valid buffer corresponding
to the buf_id received from the hardware. This causes an infinite loop
in the destination processing, resulting in a kernel crash.
kernel log:
ath11k_pci 0000:58:00.0: data msdu_pop: invalid buf_id 309
ath11k_pci 0000:58:00.0: data dp_rx_monitor_link_desc_return failed
ath11k_pci 0000:58:00.0: data msdu_pop: invalid buf_id 309
ath11k_pci 0000:58:00.0: data dp_rx_monitor_link_desc_return failed
Fix this by skipping the problematic buf_id and reaping the next entry,
replacing the break with the next MSDU processing.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: add srng->lock for ath11k_hal_srng_* in monitor mode
ath11k_hal_srng_* should be used with srng->lock to protect srng data.
For ath11k_dp_rx_mon_dest_process() and ath11k_dp_full_mon_process_rx(),
they use ath11k_hal_srng_* for many times but never call srng->lock.
So when running (full) monitor mode, warning will occur:
RIP: 0010:ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k]
Call Trace:
? ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k]
ath11k_dp_rx_process_mon_status+0xc45/0x1190 [ath11k]
? idr_alloc_u32+0x97/0xd0
ath11k_dp_rx_process_mon_rings+0x32a/0x550 [ath11k]
ath11k_dp_service_srng+0x289/0x5a0 [ath11k]
ath11k_pcic_ext_grp_napi_poll+0x30/0xd0 [ath11k]
__napi_poll+0x30/0x1f0
net_rx_action+0x198/0x320
__do_softirq+0xdd/0x319
So add srng->lock for them to avoid such warnings.
Inorder to fetch the srng->lock, should change srng's definition from
'void' to 'struct hal_srng'. And initialize them elsewhere to prevent
one line of code from being too long. This is consistent with other ring
process functions, such as ath11k_dp_process_rx().
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: check 'jh->b_transaction' before removing it from checkpoint
Following process will corrupt ext4 image:
Step 1:
jbd2_journal_commit_transaction
__jbd2_journal_insert_checkpoint(jh, commit_transaction)
// Put jh into trans1->t_checkpoint_list
journal->j_checkpoint_transactions = commit_transaction
// Put trans1 into journal->j_checkpoint_transactions
Step 2:
do_get_write_access
test_clear_buffer_dirty(bh) // clear buffer dirty，set jbd dirty
__jbd2_journal_file_buffer(jh, transaction) // jh belongs to trans2
Step 3:
drop_cache
journal_shrink_one_cp_list
jbd2_journal_try_remove_checkpoint
if (!trylock_buffer(bh)) // lock bh, true
if (buffer_dirty(bh)) // buffer is not dirty
__jbd2_journal_remove_checkpoint(jh)
// remove jh from trans1->t_checkpoint_list
Step 4:
jbd2_log_do_checkpoint
trans1 = journal->j_checkpoint_transactions
// jh is not in trans1->t_checkpoint_list
jbd2_cleanup_journal_tail(journal) // trans1 is done
Step 5: Power cut, trans2 is not committed, jh is lost in next mounting.
Fix it by checking 'jh->b_transaction' before remove it from checkpoint. |
| Tautulli is a Python based monitoring and tracking tool for Plex Media Server. Prior to version 2.17.0, the /newsletter/image/images API endpoint is vulnerable to path traversal, allowing unauthenticated attackers to read arbitrary files from the application server's filesystem. This issue has been patched in version 2.17.0. |
| An out-of-bounds write issue was addressed with improved input validation. This issue is fixed in Xcode 26.1. Processing a maliciously crafted file may lead to heap corruption. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.24.2, an unvalidated auth_length field read from the network triggers a WINPR_ASSERT() failure in rts_read_auth_verifier_no_checks(), causing any FreeRDP client connecting through a malicious RDP Gateway to crash with SIGABRT. This is a pre-authentication denial of service affecting all FreeRDP clients using RPC-over-HTTP gateway transport. The assertion is active in default release builds (WITH_VERBOSE_WINPR_ASSERT=ON). This issue has been patched in version 3.24.2. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.24.2, a double-free vulnerability in kerberos_AcceptSecurityContext() and kerberos_InitializeSecurityContextA() (WinPR, winpr/libwinpr/sspi/Kerberos/kerberos.c) can cause a crash in any FreeRDP clients on systems where Kerberos and/or Kerberos U2U is configured (Samba AD member, or krb5 for NFS). The crash is triggered during NLA connection teardown and requires a failed authentication attempt. This issue has been patched in version 3.24.2. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.24.2, in resize_vbar_entry() in libfreerdp/codec/clear.c, vBarEntry->size is updated to vBarEntry->count before the winpr_aligned_recalloc() call. If realloc fails, size is inflated while pixels still points to the old, smaller buffer. On a subsequent call where count <= size (the inflated value), realloc is skipped. The caller then writes count * bpp bytes of attacker-controlled pixel data into the undersized buffer, causing a heap buffer overflow. This issue has been patched in version 3.24.2. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in kerberos authentication
Setting sess->user = NULL was introduced to fix the dangling pointer
created by ksmbd_free_user. However, it is possible another thread could
be operating on the session and make use of sess->user after it has been
passed to ksmbd_free_user but before sess->user is set to NULL. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.24.2, a malicious RDP server can crash the FreeRDP client by sending audio data in IMA ADPCM format with an invalid initial step index value (>= 89). The unvalidated step index is read directly from the network and used to index into a 89-entry lookup table, triggering a WINPR_ASSERT() failure and process abort via SIGABRT. This affects any FreeRDP client that has audio redirection (RDPSND) enabled, which is the default configuration. This issue has been patched in version 3.24.2. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.24.2, there is a heap-buffer-overflow READ vulnerability at 24 bytes before the allocation, in winpr_aligned_offset_recalloc(). This issue has been patched in version 3.24.2. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.24.2, progressive_decompress_tile_upgrade() detects a mismatch via progressive_rfx_quant_cmp_equal() but only emits WLog_WARN, execution continues. The wrapped value (247) is used as a shift exponent, causing undefined behavior and an approximately 80 billion iteration loop (CPU DoS). This issue has been patched in version 3.24.2. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.24.2, pixel data from adjacent heap memory is rendered to screen, potentially leaking sensitive data to the attacker. This issue has been patched in version 3.24.2. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.24.2, in yuv_ensure_buffer() in libfreerdp/codec/h264.c, h264->width and h264->height are updated before the reallocation loop. If any winpr_aligned_recalloc() call fails, the function returns FALSE but width/height are already inflated. This issue has been patched in version 3.24.2. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.24.2, in persistent_cache_read_entry_v3() in libfreerdp/cache/persistent.c, persistent->bmpSize is updated before winpr_aligned_recalloc(). If realloc fails, bmpSize is inflated while bmpData points to the old buffer. This issue has been patched in version 3.24.2. |
| GStreamer RIFF Palette Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation.
The specific flaw exists within the handling of palette data in AVI files. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before writing to memory. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-28854. |
| NGINX Open Source and NGINX Plus have a vulnerability in the ngx_http_dav_module module that might allow an attacker to trigger a buffer overflow to the NGINX worker process; this vulnerability may result in termination of the NGINX worker process or modification of source or destination file names outside the document root. This issue affects NGINX Open Source and NGINX Plus when the configuration file uses DAV module MOVE or COPY methods, prefix location (nonregular expression location configuration), and alias directives. The integrity impact is constrained because the NGINX worker process user has low privileges and does not have access to the entire system. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| Vim is an open source, command line text editor. Prior to version 9.2.0202, a command injection vulnerability exists in Vim's glob() function on Unix-like systems. By including a newline character (\n) in a pattern passed to glob(), an attacker may be able to execute arbitrary shell commands. This vulnerability depends on the user's 'shell' setting. This issue has been patched in version 9.2.0202. |
| Cross-site scripting (XSS) vulnerability in a reachable files_pdfviewer example directory in Nextcloud with versions before 22.2.10.33, 23.0.12.29, 24.0.12.28, 25.0.13.23, 26.0.13.20, 27.1.11.20, 28.0.14.11, 29.0.16.8, 30.0.17, 31.0.10, and 32.0.1 allows attackers to execute arbitrary JavaScript in the context of a user's browser via a crafted PDF file to viewer.html. This issue is related to CVE-2024-4367, but the root cause of this Nextcloud issue is that the product exposes executable example code on a same-origin basis. |
| WWBN AVideo is an open source video platform. In versions up to and including 26.0, the `sanitizeFFmpegCommand()` function in `plugin/API/standAlone/functions.php` is designed to prevent OS command injection in ffmpeg commands by stripping dangerous shell metacharacters (`&&`, `;`, `|`, `` ` ``, `<`, `>`). However, it fails to strip `$()` (bash command substitution syntax). Since the sanitized command is executed inside a double-quoted `sh -c` context in `execAsync()`, an attacker who can craft a valid encrypted payload can achieve arbitrary command execution on the standalone encoder server. Commit 25c8ab90269e3a01fb4cf205b40a373487f022e1 contains a patch. |
