| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Marqo 2.26.0 contains a server-side request forgery vulnerability in the add_documents endpoint that allows unauthenticated attackers to trigger requests to arbitrary URLs by supplying malicious media field values. Attackers can exploit download_image_from_url and fetch_content_sample functions which lack destination filtering and host validation to access internal services and cloud metadata endpoints. |
| Chroma 1.5.9 fails to validate maximum bounds on HNSW index parameters max_neighbors, ef_construction, and ef_search in collection-create requests. Unauthenticated attackers can supply arbitrarily large parameter values to exhaust server memory and cause denial of service during index compaction. |
| FastChat contains an authentication bypass vulnerability in the /register_worker endpoint that allows unauthenticated attackers to register arbitrary worker addresses and perform server-side request forgery. Attackers can register malicious workers under victim model names to intercept user prompts, images, and responses, or probe internal network ports across the worker mesh. |
| jina-ai reader contains a server-side request forgery vulnerability where URL validation is performed only on the initial request but not re-applied to subsequent redirect hops. Attackers can craft a public URL that redirects to internal network addresses or cloud metadata endpoints, allowing the server to fetch and return the target's response body to the attacker. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix memory leak in xfs_dqinode_metadir_create()
If xfs_metadir_create() fails in xfs_dqinode_metadir_create(), the current
code returns directly, leaking the allocated update and transaction state.
If the subsequent commit fails, the caller-owned inode reference is left
behind.
Fix this memory leak by routing the create failure path through
xfs_metadir_cancel(). For both create and commit failures, finish and
release any inode returned to the caller, mirroring the unwind pattern in
xfs_metadir_mkdir().
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings. Runtime validation
used kprobe fault injection during `mount -o uquota` on a metadir XFS
image. Injecting xfs_metadir_create() reproduced the old active-update path
that left mount stuck later in mount setup; after this change, the same
injection reported cancel_hits=1 and irele_hits=1. Injecting
xfs_metadir_commit() exercised the old inode-reference leak path; after
this change, it reported irele_hits=1. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix exchmaps reservation limit check
xfs_exchmaps_estimate_overhead() adds the bmbt and rmapbt
overhead to a local resblks variable, but the final UINT_MAX
check still tests req->resblks. That is the reservation value
from before the overhead was added.
The computed value is stored back in req->resblks and later passed
to xfs_trans_alloc(), whose block reservation argument is unsigned
int. Check the computed reservation so the existing limit applies
to the value that will be used. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mtk-jpeg: cancel workqueue on release for supported platforms only
Since a recent fix the mtk_jpeg_release function cancels any pending
or running work present in the driver workqueue using
cancel_work_sync function.
Currently, only the multicore based variants use this workqueue and they
have the jpeg_worker platform data field initialized with a workqueue
callback function. For the others, this field value remain NULL by
default.
The cancel_work_sync function is unconditionally called in
mtk_jpeg_release function, even for the variants that do not use the
workqueue. This call generates a WARN_ON print in __flush_work because
the workqueue callback function presence check fails in __flush_work
function (used by cancel_work_sync).
So, to avoid these warnings, call cancel_work_sync only if a workqueue
callback is defined in platform data. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: reject CLEAN_SEGMENTS ioctl with out-of-range segment numbers
Syzbot reported a hung task in nilfs_transaction_begin() where multiple
tasks performing chmod() on a nilfs2 mount blocked for over 143 seconds
waiting to acquire ns_segctor_sem for read:
INFO: task syz.0.17:5918 blocked for more than 143 seconds.
Call Trace:
schedule+0x164/0x360
rwsem_down_read_slowpath+0x6d9/0x940
down_read+0x99/0x2e0
nilfs_transaction_begin+0x364/0x710 fs/nilfs2/segment.c:221
nilfs_setattr+0x124/0x2c0 fs/nilfs2/inode.c:921
notify_change+0xc1a/0xf40
chmod_common+0x273/0x4a0
do_fchmodat+0x12d/0x230
The writer holding ns_segctor_sem was a concurrent
NILFS_IOCTL_CLEAN_SEGMENTS caller, stuck inside printk while emitting
per-element warnings from nilfs_sufile_updatev():
__nilfs_msg+0x373/0x450 fs/nilfs2/super.c:78
nilfs_sufile_updatev+0x21c/0x6d0 fs/nilfs2/sufile.c:186
nilfs_sufile_freev fs/nilfs2/sufile.h:93 [inline]
nilfs_free_segments fs/nilfs2/segment.c:1140 [inline]
nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1261 [inline]
nilfs_segctor_do_construct+0x1f55/0x76c0
nilfs_clean_segments+0x3bd/0xa50
nilfs_ioctl_clean_segments fs/nilfs2/ioctl.c:922 [inline]
nilfs_ioctl+0x261f/0x2780
The root cause is that user-supplied segment numbers are not validated
before nilfs_clean_segments() begins doing work; the range check on
each segnum is performed deep inside the call chain by
nilfs_sufile_updatev(), which emits a nilfs_warn() per invalid entry
while still holding the segctor lock and the sufile mi_sem. Under load
(repeated invocations across multiple mounts saturating the global
printk path), the cumulative printk latency keeps ns_segctor_sem held
long enough to trip the hung_task watchdog, blocking concurrent
operations such as chmod() that need ns_segctor_sem for read.
Fix by validating the contents of kbufs[4] in nilfs_clean_segments()
immediately after acquiring ns_segctor_sem via nilfs_transaction_lock().
Holding ns_segctor_sem serializes the check against
nilfs_ioctl_resize(), which can modify ns_nsegments, so the validation
uses a consistent value. Out-of-range segment numbers are rejected
with -EINVAL before any segment-cleaning work begins, so the bad
entries never reach the per-element diagnostic path inside
nilfs_sufile_updatev(). |
| In the Linux kernel, the following vulnerability has been resolved:
hfs/hfsplus: fix u32 overflow in check_and_correct_requested_length
check_and_correct_requested_length() compares (off + len) against
node_size using u32 arithmetic. When the caller passes a large len
value (e.g. from an underflowed subtraction in hfs_brec_remove()),
off + len can wrap past 2^32 and produce a small result, causing the
bounds check to pass when it should fail.
For example, with off=14 and len=0xFFFFFFF2 (underflowed from
data_off - keyoffset - size in hfs_brec_remove), off + len wraps to 6,
which is less than a typical node_size of 512, so the check passes and
the subsequent memmove reads ~4GB past the node buffer.
Fix this by widening the addition to u64 before comparing against
node_size. This prevents the u32 wrap while keeping the logic
straightforward. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: lg-g15: cancel pending work on remove to fix a use-after-free
lg_g15_data is allocated with devm and holds a work item. The report
handlers schedule that work straight from device input.
lg_g15_event() and lg_g15_v2_event() do it on the backlight cycle key,
and lg_g510_leds_event() does it too. The worker dereferences the
lg_g15_data back through container_of.
The driver had no remove callback and never cancelled the work. So if a
report scheduled the work and the keyboard was then unplugged, devres
freed lg_g15_data while the work was still pending or running, and the
worker touched freed memory. This is a use-after-free. It is reachable
as a race on device unplug.
Add a remove callback that cancels the work before devres frees the
state. g15->work is only initialized for the models that schedule it
(G15, G15 v2, G510). The G13 and Z-10 leave it zeroed, so guard the
cancel on g15->work.func to avoid cancelling a work that was never set
up. The g15 NULL test mirrors the one already in lg_g15_raw_event(). |
| In the Linux kernel, the following vulnerability has been resolved:
HID: appleir: fix UAF on pending key_up_timer in remove()
appleir_remove() runs hid_hw_stop() before timer_delete_sync().
hid_hw_stop() synchronously unregisters the HID input device via
hid_disconnect() -> hidinput_disconnect() -> input_unregister_device(),
which drops the last reference and frees the underlying input_dev when
no userspace handle holds it open.
key_up_tick() reads appleir->input_dev and calls input_report_key() /
input_sync() on it. The timer is armed from appleir_raw_event() with
a HZ/8 (~125 ms) timeout on every keydown and key-repeat report. If a
key was pressed shortly before the device is disconnected, the timer
can fire after hid_hw_stop() has freed input_dev but before the
teardown drains it.
A simple reorder is not sufficient. Putting the timer drain first
still leaves a window where a USB URB completion (raw_event) running
during hid_hw_stop() can call mod_timer() and re-arm the timer, which
then fires after hidinput_disconnect() has freed input_dev. The same
URB-completion window also lets raw_event() reach key_up(), key_down()
and battery_flat() directly, all of which dereference
appleir->input_dev.
Introduce a 'removing' flag on struct appleir, gated by the existing
spinlock. appleir_remove() sets the flag under the lock and then
shuts down the timer with timer_shutdown_sync(), which both drains any
in-flight callback and permanently disables further mod_timer() calls.
appleir_raw_event() and key_up_tick() bail out early if the flag is
set, so no path can arm or run the timer, or dereference
appleir->input_dev, after remove() has started tearing down.
The keyrepeat and flatbattery branches of appleir_raw_event()
previously called into the input layer without holding the spinlock;
take it now so the flag check is well-defined. This incidentally
closes a pre-existing read-side race on appleir->current_key in the
keyrepeat branch.
This bug is structurally a sibling of commit 4db2af929279 ("HID:
appletb-kbd: fix UAF in inactivity-timer cleanup path") and has been
present since the driver was introduced. |
| ** UNSUPPORTED WHEN ASSIGNED ** Stack-based Buffer Overflow vulnerability in Apache Lucy.
This issue affects Apache Lucy: all versions.
As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users.
Lucy is now maintained outside of the ASF
at https://github.com/lucysearch . This issue has been fixed in 0.8.0 there.
NOTE: This vulnerability only affects products that are no longer supported by the maintainer. |
| In the Linux kernel, the following vulnerability has been resolved:
gtp: serialize PDP context updates
PDP contexts can be deleted through GTP_CMD_DELPDP or while the GTP
network device is being unregistered. The latter is serialized by RTNL,
but the generic-netlink delete path only holds RCU.
Running both paths concurrently can therefore make both paths delete the
same PDP context. The issue was found through static analysis and
reproduced on a KASAN-enabled kernel by a simple two-thread program
racing GTP_CMD_DELPDP against RTM_DELLINK:
Oops: general protection fault, probably for non-canonical address
KASAN: maybe wild-memory-access in range
[0xdead000000000120-0xdead000000000127]
RIP: gtp_genl_del_pdp+0x1c1/0x420 [gtp]
RBP: dead000000000122
The second deletion dereferenced the poisoned hlist pprev pointer.
Serialize gtp_pdp_add(), gtp_genl_del_pdp(), and gtp_dellink() with a
shared mutex. Keep the mutex held until the final use of a PDP context in
the NEWPDP path, and keep the RCU read-side section around the complete
PDP context use in the DELPDP path. |
| In the Linux kernel, the following vulnerability has been resolved:
net/packet: defer vmalloc TX_RING free until skbs finish
AF_PACKET TX_RING skbs keep a raw pointer to their ring frame. The skb
page references preserve page-backed ring blocks after pg_vec is freed,
but they do not preserve a vmalloc mapping.
tpacket_destruct_skb() currently drops the pending reference before
writing the timestamp and TP_STATUS_AVAILABLE to the frame. Move the
decrement after those stores. The smp_wmb() in __packet_set_status()
orders the frame stores before the decrement.
Also recheck pending TX frames under pg_vec_lock before non-closing
ring replacement, so a racing send cannot add a pending skb between
the initial check and the ring swap.
Ring allocation can produce a mixture of page-backed and vmalloc-backed
blocks. Allocate deferred-work storage during TX ring setup when the
first vmalloc-backed block is encountered, and keep its pointer in the
pg_vec allocation header. If allocation fails, return -ENOMEM from ring
setup. On socket close, a non-NULL pointer identifies a vmalloc-backed
vector without a scan. If TX skbs remain, defer the whole vector to
system_long_wq.
After pg_vec is detached, a late destructor can skip the pending
decrement. Use socket write-memory accounting as the deferred lifetime
gate instead: an skb remains charged through its final sock_wfree(),
after all ring-frame accesses. The delayed work retains a socket
reference and reschedules itself until no TX skbs remain.
Move pending_refcnt release to packet_sock_destruct() so late skb
destructors and deferred cleanup can safely use it after
packet_release(). Page-backed teardown remains synchronous, and no lock
is added to the TX completion hot path. |
| ** UNSUPPORTED WHEN ASSIGNED ** Deserialization of Untrusted Data vulnerability in Apache Lucy.
This issue affects Apache Lucy: all versions.
As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users.
Lucy is now maintained outside of the ASF at https://github.com/lucysearch . 0.8.0 is no longer affected by this issue, because the offending feature has been removed there.
NOTE: This vulnerability only affects products that are no longer supported by the maintainer. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: don't queue packet path object notifications
All file:line references below are against v7.2-rc4 (ac5b0e5651b1). The
trace was captured on 7.2.0-rc6-kasan72rc6 (075b74841bd0), where the same
lines apply.
nft_obj_notify() is exported and reached from the packet path. Its only
in-tree caller is nft_quota_obj_eval() (net/netfilter/nft_quota.c:68),
which notifies with GFP_ATOMIC while evaluating a rule for a transiting
packet, holding no mutex.
Since commit 67cc570edaa0 ("netfilter: nf_tables: coalesce multiple
notifications into one skbuff") that notification is no longer sent
immediately. __nft_obj_notify() queues it onto nft_net->notify_list via
nft_notify_enqueue() (net/netfilter/nf_tables_api.c:1211), which is a bare
list_add_tail(). notify_list has no lock of its own
(include/net/netfilter/nf_tables.h:1951), it is serialised by commit_mutex:
the six other enqueue sites all run inside a netlink transaction, and the
drain in nft_commit_notify() (net/netfilter/nf_tables_api.c:10746) does
list_del() + kfree_skb() from nf_tables_commit() with commit_mutex held.
Sending packets through a chain that references a depleted quota object
therefore races an unlocked list_add_tail() against list_del() +
kfree_skb() on another CPU. The WRITE_ONCE(prev->next, new) in __list_add()
then stores through an sk_buff that has already been freed:
BUG: KASAN: slab-use-after-free in __nft_obj_notify+0x2c5/0x2d0
Write of size 8 at addr ff110001047183c0 by task poc/76
CPU: 0 UID: 1000 PID: 76 Comm: poc Tainted: G W 7.2.0-rc6-kasan72rc6 #4
Call Trace:
<IRQ>
__nft_obj_notify (include/linux/list.h:164 include/linux/list.h:191
net/netfilter/nf_tables_api.c:1211
net/netfilter/nf_tables_api.c:8743)
nft_quota_obj_eval (net/netfilter/nft_quota.c:68)
nft_do_chain_inet
nf_hook_slow
__ip_local_out
ip_push_pending_frames
udp_send_skb
udp_sendmsg
__x64_sys_sendto
Allocated by task 77:
__alloc_skb (net/core/skbuff.c:704)
__nft_obj_notify (include/net/netlink.h:1055
net/netfilter/nf_tables_api.c:8731)
nft_quota_obj_eval (net/netfilter/nft_quota.c:68)
nft_do_chain
Freed by task 79:
nf_tables_commit (include/linux/skbuff.h:1332
net/netfilter/nf_tables_api.c:10759
net/netfilter/nf_tables_api.c:11185)
nfnetlink_rcv_batch (net/netfilter/nfnetlink.c:574)
netlink_unicast
netlink_sendmsg
The buggy address belongs to the cache skbuff_head_cache of size 232
Queueing from the packet path is wrong even leaving the race aside:
notify_list is only drained by nft_commit_notify() from nf_tables_commit()
(:11185), so a notification enqueued outside a transaction is not sent
until some later netlink batch commits, if one ever does.
The gfp argument that nft_obj_notify() still takes is a leftover of the
pre-67cc570edaa0 behaviour, where this path called nfnetlink_send()
directly. Restore that: split the message construction out into
nft_obj_notify_alloc() and let each caller decide what to do with the skb.
nft_obj_notify(), the exported one reached from the packet path, sends it
straight away; nf_tables_obj_notify(), which runs under commit_mutex, keeps
queueing it, so transaction notifications are still coalesced. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Complete cleanup after system-resume errors
A failed system resume can leave the card unusable until reboot.
usb_audio_resume() jumps to err_out when snd_usb_pcm_resume() or
snd_usb_mixer_resume() fails. The error path skips the out: block, which
restores D0 and decrements chip->num_suspended_intf.
The card stays in SNDRV_CTL_POWER_D3hot, so later control access blocks in
snd_power_ref_and_wait(). USB core logs an interface resume callback error.
It does not retry that callback, so a later callback cannot complete the
skipped cleanup.
usb_audio_suspend() increments num_suspended_intf before returning success.
A system-resume callback must consume the system-suspend count even if a
component resume fails. Otherwise, the stranded count skews later suspend
and resume cycles.
Do not apply this cleanup to runtime-resume errors. Runtime PM can retry
-EAGAIN or -EBUSY without another suspend callback. The count must continue
to describe that suspended interface. Other runtime-resume errors latch
runtime_error in the PM core and do not cause an immediate callback retry.
Both parts of the system-resume error path are longstanding. Commit
88a8516a2128a ("ALSA: usbaudio: implement USB autosuspend") introduced
err_out past the D0 restore. Commit 862b2509d157c ("ALSA: usb-audio: Fix
inconsistent card PM state after resume") later moved
num_suspended_intf-- into the out: block. The error path now skips both
operations.
No third-party code is needed to reach the error path.
snd_usb_mixer_resume() ends in snd_usb_mixer_activate(), which returns the
result of usb_submit_urb() for devices that have a mixer status URB. Its
mixer->private_resume hook can also fail through scarlett2_init_notify().
snd_usb_pcm_resume() issues a SET_CUR request to a UAC3 power domain. It
can return -EPIPE or -EIO when the device stalls the request.
Route a component error through out: only when system_suspend is nonzero.
Continue to return runtime-resume errors through err_out. Later component
resume stages remain skipped. The original error still reaches USB core.
A later transfer can fail if the device did not recover.
I reproduced the system-resume failure on an Audient iD14 MkI with an
out-of-tree diagnostic mixer resume hook. An injected -EIO on the unpatched
core left control readers in uninterruptible sleep in
snd_power_ref_and_wait() until a reboot. With this patch, the same failure
restored control access. A second system suspend and resume also succeeded
after I disabled fault injection. |
| ** UNSUPPORTED WHEN ASSIGNED ** Uncontrolled Recursion vulnerability in Apache Lucy.
This issue affects Apache Lucy: all versions.
As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users.
NOTE: This vulnerability only affects products that are no longer supported by the ASF. Lucy is now maintained outside of the ASF at https://github.com/lucysearch |
| In the Linux kernel, the following vulnerability has been resolved:
netpoll: fix a use-after-free on shutdown path
There is a use-after-free error on netpoll, which is clearly detected by
KASAN.
BUG: KASAN: slab-use-after-free in _raw_spin_lock_irqsave+0x3b/0x80
Read of size 1 at addr ... by task kworker/9:1
Workqueue: events queue_process
Call Trace:
skb_dequeue+0x1e/0xb0
queue_process+0x2c/0x600
process_scheduled_works+0x4b6/0x850
worker_thread+0x414/0x5a0
Allocated by task 242:
__netpoll_setup+0x201/0x4a0
netpoll_setup+0x249/0x550
enabled_store+0x32f/0x380
Freed by task 0:
kfree+0x1b7/0x540
rcu_core+0x3f8/0x7a0
The problem happens when there is a pending TX worker running in
parallel with the cleanup path.
This is what happens on netpoll shutdown path:
1) __netpoll_cleanup() is called
2) set dev->npinfo to NULL
3) call_rcu() with rcu_cleanup_netpoll_info()
3.1) rcu_cleanup_netpoll_info() tries to cancel all workers with
cancel_delayed_work(), but doesn't wait for the worker to finish
4) and kfree(npinfo);
Because 3.1) doesn't really cancel the work, as the comment says "we
can't call cancel_delayed_work_sync here, as we are in softirq", the TX
worker can run after 4).
Tl;DR: queue_process() is not an RCU reader, it reaches npinfo through
the work item via container_of().
Use disable_delayed_work_sync() to ensure the worker is completely
stopped and prevent any future re-arming attempts. Once npinfo is set
to NULL, senders will bail out and not queue new work. The disable flag
ensures any in-flight re-arming attempts also fail silently.
In the future, we can do the cleanup inline here without needing the
npinfo->rcu rcu_head, but that is net-next material. |
| goose 1.37.0 executes arbitrary commands from recipe stdio extensions and retry.checks without security inspection. Attackers can distribute malicious recipes that execute shell commands as the user running goose, bypassing the recipe security scan which does not inspect extensions or retry configurations. |
