| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.21.0, a client-side heap buffer overflow occurs in the FreeRDP client’s `gdi_SurfaceToSurface` path due to a mismatch between destination rectangle clamping and the actual copy size. A malicious server can trigger a client‑side heap buffer overflow, causing a crash (DoS) and potential heap corruption with code‑execution risk depending on allocator behavior and surrounding heap layout. Version 3.21.0 contains a patch for the issue. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.21.0, a client-side heap buffer overflow occurs in the ClearCodec bands decode path when crafted band coordinates allow writes past the end of the destination surface buffer. A malicious server can trigger a client‑side heap buffer overflow, causing a crash (DoS) and potential heap corruption with code‑execution risk depending on allocator behavior and surrounding heap layout. Version 3.21.0 contains a patch for the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: avoid kernel-infoleak from struct iw_point
struct iw_point has a 32bit hole on 64bit arches.
struct iw_point {
void __user *pointer; /* Pointer to the data (in user space) */
__u16 length; /* number of fields or size in bytes */
__u16 flags; /* Optional params */
};
Make sure to zero the structure to avoid disclosing 32bits of kernel data
to user space. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: tlv320adcx140: fix null pointer
The "snd_soc_component" in "adcx140_priv" was only used once but never
set. It was only used for reaching "dev" which is already present in
"adcx140_priv". |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix use-after-free in inet6_addr_del().
syzbot reported use-after-free of inet6_ifaddr in
inet6_addr_del(). [0]
The cited commit accidentally moved ipv6_del_addr() for
mngtmpaddr before reading its ifp->flags for temporary
addresses in inet6_addr_del().
Let's move ipv6_del_addr() down to fix the UAF.
[0]:
BUG: KASAN: slab-use-after-free in inet6_addr_del.constprop.0+0x67a/0x6b0 net/ipv6/addrconf.c:3117
Read of size 4 at addr ffff88807b89c86c by task syz.3.1618/9593
CPU: 0 UID: 0 PID: 9593 Comm: syz.3.1618 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xcd/0x630 mm/kasan/report.c:482
kasan_report+0xe0/0x110 mm/kasan/report.c:595
inet6_addr_del.constprop.0+0x67a/0x6b0 net/ipv6/addrconf.c:3117
addrconf_del_ifaddr+0x11e/0x190 net/ipv6/addrconf.c:3181
inet6_ioctl+0x1e5/0x2b0 net/ipv6/af_inet6.c:582
sock_do_ioctl+0x118/0x280 net/socket.c:1254
sock_ioctl+0x227/0x6b0 net/socket.c:1375
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f164cf8f749
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f164de64038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f164d1e5fa0 RCX: 00007f164cf8f749
RDX: 0000200000000000 RSI: 0000000000008936 RDI: 0000000000000003
RBP: 00007f164d013f91 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f164d1e6038 R14: 00007f164d1e5fa0 R15: 00007ffde15c8288
</TASK>
Allocated by task 9593:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:56
kasan_save_track+0x14/0x30 mm/kasan/common.c:77
poison_kmalloc_redzone mm/kasan/common.c:397 [inline]
__kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:414
kmalloc_noprof include/linux/slab.h:957 [inline]
kzalloc_noprof include/linux/slab.h:1094 [inline]
ipv6_add_addr+0x4e3/0x2010 net/ipv6/addrconf.c:1120
inet6_addr_add+0x256/0x9b0 net/ipv6/addrconf.c:3050
addrconf_add_ifaddr+0x1fc/0x450 net/ipv6/addrconf.c:3160
inet6_ioctl+0x103/0x2b0 net/ipv6/af_inet6.c:580
sock_do_ioctl+0x118/0x280 net/socket.c:1254
sock_ioctl+0x227/0x6b0 net/socket.c:1375
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 6099:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:56
kasan_save_track+0x14/0x30 mm/kasan/common.c:77
kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:584
poison_slab_object mm/kasan/common.c:252 [inline]
__kasan_slab_free+0x5f/0x80 mm/kasan/common.c:284
kasan_slab_free include/linux/kasan.h:234 [inline]
slab_free_hook mm/slub.c:2540 [inline]
slab_free_freelist_hook mm/slub.c:2569 [inline]
slab_free_bulk mm/slub.c:6696 [inline]
kmem_cache_free_bulk mm/slub.c:7383 [inline]
kmem_cache_free_bulk+0x2bf/0x680 mm/slub.c:7362
kfree_bulk include/linux/slab.h:830 [inline]
kvfree_rcu_bulk+0x1b7/0x1e0 mm/slab_common.c:1523
kvfree_rcu_drain_ready mm/slab_common.c:1728 [inline]
kfree_rcu_monitor+0x1d0/0x2f0 mm/slab_common.c:1801
process_one_work+0x9ba/0x1b20 kernel/workqueue.c:3257
process_scheduled_works kernel/workqu
---truncated--- |
| node-tar,a Tar for Node.js, contains a vulnerability in versions prior to 7.5.7 where the security check for hardlink entries uses different path resolution semantics than the actual hardlink creation logic. This mismatch allows an attacker to craft a malicious TAR archive that bypasses path traversal protections and creates hardlinks to arbitrary files outside the extraction directory. Version 7.5.7 contains a fix for the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
net: marvell: prestera: fix NULL dereference on devlink_alloc() failure
devlink_alloc() may return NULL on allocation failure, but
prestera_devlink_alloc() unconditionally calls devlink_priv() on
the returned pointer.
This leads to a NULL pointer dereference if devlink allocation fails.
Add a check for a NULL devlink pointer and return NULL early to avoid
the crash. |
| In the Linux kernel, the following vulnerability has been resolved:
net: 3com: 3c59x: fix possible null dereference in vortex_probe1()
pdev can be null and free_ring: can be called in 1297 with a null
pdev. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Pass netdev to mlx5e_destroy_netdev instead of priv
mlx5e_priv is an unstable structure that can be memset(0) if profile
attaching fails.
Pass netdev to mlx5e_destroy_netdev() to guarantee it will work on a
valid netdev.
On mlx5e_remove: Check validity of priv->profile, before attempting
to cleanup any resources that might be not there.
This fixes a kernel oops in mlx5e_remove when switchdev mode fails due
to change profile failure.
$ devlink dev eswitch set pci/0000:00:03.0 mode switchdev
Error: mlx5_core: Failed setting eswitch to offloads.
dmesg:
workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12
mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: new profile init failed, -12
workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12
mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12
$ devlink dev reload pci/0000:00:03.0 ==> oops
BUG: kernel NULL pointer dereference, address: 0000000000000370
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 15 UID: 0 PID: 520 Comm: devlink Not tainted 6.18.0-rc5+ #115 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:mlx5e_dcbnl_dscp_app+0x23/0x100
RSP: 0018:ffffc9000083f8b8 EFLAGS: 00010286
RAX: ffff8881126fc380 RBX: ffff8881015ac400 RCX: ffffffff826ffc45
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8881035109c0
RBP: ffff8881035109c0 R08: ffff888101e3e838 R09: ffff888100264e10
R10: ffffc9000083f898 R11: ffffc9000083f8a0 R12: ffff888101b921a0
R13: ffff888101b921a0 R14: ffff8881015ac9a0 R15: ffff8881015ac400
FS: 00007f789a3c8740(0000) GS:ffff88856aa59000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000370 CR3: 000000010b6c0001 CR4: 0000000000370ef0
Call Trace:
<TASK>
mlx5e_remove+0x57/0x110
device_release_driver_internal+0x19c/0x200
bus_remove_device+0xc6/0x130
device_del+0x160/0x3d0
? devl_param_driverinit_value_get+0x2d/0x90
mlx5_detach_device+0x89/0xe0
mlx5_unload_one_devl_locked+0x3a/0x70
mlx5_devlink_reload_down+0xc8/0x220
devlink_reload+0x7d/0x260
devlink_nl_reload_doit+0x45b/0x5a0
genl_family_rcv_msg_doit+0xe8/0x140 |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: make calc_target() set t->paused, not just clear it
Currently calc_target() clears t->paused if the request shouldn't be
paused anymore, but doesn't ever set t->paused even though it's able to
determine when the request should be paused. Setting t->paused is left
to __submit_request() which is fine for regular requests but doesn't
work for linger requests -- since __submit_request() doesn't operate
on linger requests, there is nowhere for lreq->t.paused to be set.
One consequence of this is that watches don't get reestablished on
paused -> unpaused transitions in cases where requests have been paused
long enough for the (paused) unwatch request to time out and for the
subsequent (re)watch request to enter the paused state. On top of the
watch not getting reestablished, rbd_reregister_watch() gets stuck with
rbd_dev->watch_mutex held:
rbd_register_watch
__rbd_register_watch
ceph_osdc_watch
linger_reg_commit_wait
It's waiting for lreq->reg_commit_wait to be completed, but for that to
happen the respective request needs to end up on need_resend_linger list
and be kicked when requests are unpaused. There is no chance for that
if the request in question is never marked paused in the first place.
The fact that rbd_dev->watch_mutex remains taken out forever then
prevents the image from getting unmapped -- "rbd unmap" would inevitably
hang in D state on an attempt to grab the mutex. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panel-simple: fix connector type for DataImage SCF0700C48GGU18 panel
The connector type for the DataImage SCF0700C48GGU18 panel is missing and
devm_drm_panel_bridge_add() requires connector type to be set. This leads
to a warning and a backtrace in the kernel log and panel does not work:
"
WARNING: CPU: 3 PID: 38 at drivers/gpu/drm/bridge/panel.c:379 devm_drm_of_get_bridge+0xac/0xb8
"
The warning is triggered by a check for valid connector type in
devm_drm_panel_bridge_add(). If there is no valid connector type
set for a panel, the warning is printed and panel is not added.
Fill in the missing connector type to fix the warning and make
the panel operational once again. |
| In the Linux kernel, the following vulnerability has been resolved:
uacce: implement mremap in uacce_vm_ops to return -EPERM
The current uacce_vm_ops does not support the mremap operation of
vm_operations_struct. Implement .mremap to return -EPERM to remind
users.
The reason we need to explicitly disable mremap is that when the
driver does not implement .mremap, it uses the default mremap
method. This could lead to a risk scenario:
An application might first mmap address p1, then mremap to p2,
followed by munmap(p1), and finally munmap(p2). Since the default
mremap copies the original vma's vm_private_data (i.e., q) to the
new vma, both munmap operations would trigger vma_close, causing
q->qfr to be freed twice(qfr will be set to null here, so repeated
release is ok). |
| In the Linux kernel, the following vulnerability has been resolved:
uacce: ensure safe queue release with state management
Directly calling `put_queue` carries risks since it cannot
guarantee that resources of `uacce_queue` have been fully released
beforehand. So adding a `stop_queue` operation for the
UACCE_CMD_PUT_Q command and leaving the `put_queue` operation to
the final resource release ensures safety.
Queue states are defined as follows:
- UACCE_Q_ZOMBIE: Initial state
- UACCE_Q_INIT: After opening `uacce`
- UACCE_Q_STARTED: After `start` is issued via `ioctl`
When executing `poweroff -f` in virt while accelerator are still
working, `uacce_fops_release` and `uacce_remove` may execute
concurrently. This can cause `uacce_put_queue` within
`uacce_fops_release` to access a NULL `ops` pointer. Therefore, add
state checks to prevent accessing freed pointers. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-sprd-adi: Fix double free in probe error path
The driver currently uses spi_alloc_host() to allocate the controller
but registers it using devm_spi_register_controller().
If devm_register_restart_handler() fails, the code jumps to the
put_ctlr label and calls spi_controller_put(). However, since the
controller was registered via a devm function, the device core will
automatically call spi_controller_put() again when the probe fails.
This results in a double-free of the spi_controller structure.
Fix this by switching to devm_spi_alloc_host() and removing the
manual spi_controller_put() call. |
| In the Linux kernel, the following vulnerability has been resolved:
can: mcba_usb: mcba_usb_read_bulk_callback(): fix URB memory leak
Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb:
gs_usb_receive_bulk_callback(): fix URB memory leak").
In mcba_usb_probe() -> mcba_usb_start(), the URBs for USB-in transfers are
allocated, added to the priv->rx_submitted anchor and submitted. In the
complete callback mcba_usb_read_bulk_callback(), the URBs are processed and
resubmitted. In mcba_usb_close() -> mcba_urb_unlink() the URBs are freed by
calling usb_kill_anchored_urbs(&priv->rx_submitted).
However, this does not take into account that the USB framework unanchors
the URB before the complete function is called. This means that once an
in-URB has been completed, it is no longer anchored and is ultimately not
released in usb_kill_anchored_urbs().
Fix the memory leak by anchoring the URB in the
mcba_usb_read_bulk_callback()to the priv->rx_submitted anchor. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: smbd: fix dma_unmap_sg() nents
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned. |
| In the Linux kernel, the following vulnerability has been resolved:
uacce: fix isolate sysfs check condition
uacce supports the device isolation feature. If the driver
implements the isolate_err_threshold_read and
isolate_err_threshold_write callback functions, uacce will create
sysfs files now. Users can read and configure the isolation policy
through sysfs. Currently, sysfs files are created as long as either
isolate_err_threshold_read or isolate_err_threshold_write callback
functions are present.
However, accessing a non-existent callback function may cause the
system to crash. Therefore, intercept the creation of sysfs if
neither read nor write exists; create sysfs if either is supported,
but intercept unsupported operations at the call site. |
| A vulnerability was found in DCN DCME-320 up to 20260121. Impacted is the function apply_config of the file /function/system/basic/bridge_cfg.php of the component Web Management Backend. Performing a manipulation of the argument ip_list results in command injection. The attack is possible to be carried out remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| cryptography is a package designed to expose cryptographic primitives and recipes to Python developers. Prior to 46.0.5, the public_key_from_numbers (or EllipticCurvePublicNumbers.public_key()), EllipticCurvePublicNumbers.public_key(), load_der_public_key() and load_pem_public_key() functions do not verify that the point belongs to the expected prime-order subgroup of the curve. This missing validation allows an attacker to provide a public key point P from a small-order subgroup. This can lead to security issues in various situations, such as the most commonly used signature verification (ECDSA) and shared key negotiation (ECDH). When the victim computes the shared secret as S = [victim_private_key]P via ECDH, this leaks information about victim_private_key mod (small_subgroup_order). For curves with cofactor > 1, this reveals the least significant bits of the private key. When these weak public keys are used in ECDSA , it's easy to forge signatures on the small subgroup. Only SECT curves are impacted by this. This vulnerability is fixed in 46.0.5. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/io-wq: check IO_WQ_BIT_EXIT inside work run loop
Currently this is checked before running the pending work. Normally this
is quite fine, as work items either end up blocking (which will create a
new worker for other items), or they complete fairly quickly. But syzbot
reports an issue where io-wq takes seemingly forever to exit, and with a
bit of debugging, this turns out to be because it queues a bunch of big
(2GB - 4096b) reads with a /dev/msr* file. Since this file type doesn't
support ->read_iter(), loop_rw_iter() ends up handling them. Each read
returns 16MB of data read, which takes 20 (!!) seconds. With a bunch of
these pending, processing the whole chain can take a long time. Easily
longer than the syzbot uninterruptible sleep timeout of 140 seconds.
This then triggers a complaint off the io-wq exit path:
INFO: task syz.4.135:6326 blocked for more than 143 seconds.
Not tainted syzkaller #0
Blocked by coredump.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz.4.135 state:D stack:26824 pid:6326 tgid:6324 ppid:5957 task_flags:0x400548 flags:0x00080000
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5256 [inline]
__schedule+0x1139/0x6150 kernel/sched/core.c:6863
__schedule_loop kernel/sched/core.c:6945 [inline]
schedule+0xe7/0x3a0 kernel/sched/core.c:6960
schedule_timeout+0x257/0x290 kernel/time/sleep_timeout.c:75
do_wait_for_common kernel/sched/completion.c:100 [inline]
__wait_for_common+0x2fc/0x4e0 kernel/sched/completion.c:121
io_wq_exit_workers io_uring/io-wq.c:1328 [inline]
io_wq_put_and_exit+0x271/0x8a0 io_uring/io-wq.c:1356
io_uring_clean_tctx+0x10d/0x190 io_uring/tctx.c:203
io_uring_cancel_generic+0x69c/0x9a0 io_uring/cancel.c:651
io_uring_files_cancel include/linux/io_uring.h:19 [inline]
do_exit+0x2ce/0x2bd0 kernel/exit.c:911
do_group_exit+0xd3/0x2a0 kernel/exit.c:1112
get_signal+0x2671/0x26d0 kernel/signal.c:3034
arch_do_signal_or_restart+0x8f/0x7e0 arch/x86/kernel/signal.c:337
__exit_to_user_mode_loop kernel/entry/common.c:41 [inline]
exit_to_user_mode_loop+0x8c/0x540 kernel/entry/common.c:75
__exit_to_user_mode_prepare include/linux/irq-entry-common.h:226 [inline]
syscall_exit_to_user_mode_prepare include/linux/irq-entry-common.h:256 [inline]
syscall_exit_to_user_mode_work include/linux/entry-common.h:159 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:194 [inline]
do_syscall_64+0x4ee/0xf80 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fa02738f749
RSP: 002b:00007fa0281ae0e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: fffffffffffffe00 RBX: 00007fa0275e6098 RCX: 00007fa02738f749
RDX: 0000000000000000 RSI: 0000000000000080 RDI: 00007fa0275e6098
RBP: 00007fa0275e6090 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fa0275e6128 R14: 00007fff14e4fcb0 R15: 00007fff14e4fd98
There's really nothing wrong here, outside of processing these reads
will take a LONG time. However, we can speed up the exit by checking the
IO_WQ_BIT_EXIT inside the io_worker_handle_work() loop, as syzbot will
exit the ring after queueing up all of these reads. Then once the first
item is processed, io-wq will simply cancel the rest. That should avoid
syzbot running into this complaint again. |
