| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Incorrect access control in the setUploadSetting function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to manipulate the upload or flash workflow via sending a crafted POST request to /cgi-bin/cstecgi.cgi. |
| Incorrect access control in the FirmwareUpgrade function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to remove Wi-Fi schedule entries via sending a crafted POST request to /cgi-bin/cstecgi.cgi. |
| Incorrect access control in the LoadDefSettings function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to reset the device configuration and reboot the device via sending a crafted POST request to /cgi-bin/cstecgi.cgi. |
| Incorrect access control in the delSlaveDevice function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to remove a specified slave device from local mesh management data and reboot the system via sending a crafted MQTT message to the cs_broker component. |
| Incorrect access control in the freeStaClient function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to forcibly disconnect wireless clients via sending a crafted MQTT message to the cs_broker component. |
| Incorrect access control in the setElinkQosConfig function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to modify privileged QoS policy on the master device via sending a crafted MQTT message to the cs_broker component. |
| An issue in kamailio v.6.1.1 and before allows a remote attacker to cause a denial of service via the IMS P-CSCF registration handling components |
| OpenAI Codex Desktop for Windows and macOS automatically inspected Git metadata and working-tree status when a user opened a workspace. If the workspace contains a repository with preserved attacker-controlled .git/config, the attr.tree setting and a configured clean or process filter can cause Git to run an attacker-controlled program. The program runs outside Codex's command sandbox with the signed-in user's privileges, without a workspace-trust prompt, command approval, or interaction with a model. The attacker can read, modify, or delete files and access credentials available to that user. Exploitation requires Git to be available on PATH and the user to open the attacker-prepared repository with its local Git configuration intact. An ordinary Git clone does not copy the source repository's .git/config and is not sufficient by itself. |
| A vulnerability in an API endpoint of AOS-CX could allow a remote unauthenticated attacker to obtain sensitive information via a man-in-the-middle attack. Successful exploitation allows an attacker to retrieve data which could be used to further compromise the confidentiality of the affected system. |
| A remote code execution security issue exists in the affected products when parsing DOE files that could allow a remote attacker to write past the end of an allocated object and execute code within the context of the current process. To exploit this vulnerability, a legitimate user must visit a malicious page or open a malicious file. |
| Joomla! Core - [20260807] - MFA Authentication Bypass in Joomla 4.0.0-5.4.7 and 6.0.0-6.1.2 - Insufficient state checks lead to a vector that allows to bypass 2FA checks. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: fix use-after-free in nvme_free_host_mem()
nvme_free_host_mem() frees dev->hmb_sgt via dma_free_noncontiguous()
but never clears the pointer afterward. This leads to a use-after-free
if nvme_free_host_mem() is called twice in the same error path.
This can happen during nvme_probe() when nvme_setup_host_mem() succeeds
in allocating the HMB (setting dev->hmb_sgt) but nvme_set_host_mem()
fails with an I/O error:
nvme_setup_host_mem()
nvme_alloc_host_mem_single() -> sets dev->hmb_sgt
nvme_set_host_mem() -> fails with -EIO
nvme_free_host_mem() -> frees hmb_sgt, but does NOT NULL it
return error
nvme_probe() error path:
nvme_free_host_mem() -> dev->hmb_sgt is stale, use-after-free
The second call dereferences the freed sgt, causing a NULL pointer
dereference in iommu_dma_free_noncontiguous() when it accesses
sgt->sgl->dma_address (the backing memory has been freed and zeroed).
This is reproducible on Thunderbolt-attached NVMe devices (e.g., OWC
Envoy Express behind a Dell WD22TB4 dock) where the device intermittently
returns I/O errors during HMB setup due to PCIe link instability.
BUG: kernel NULL pointer dereference, address: 0000000000000010
RIP: 0010:iommu_dma_free_noncontiguous+0x22/0x80
Call Trace:
<TASK>
dma_free_noncontiguous+0x3b/0x130
nvme_free_host_mem+0x30/0xf0 [nvme]
nvme_probe.cold+0xcc/0x275 [nvme]
local_pci_probe+0x43/0xa0
pci_device_probe+0xeea/0x290
really_probe+0xf9/0x3b0
__driver_probe_device+0x8b/0x170
driver_probe_device+0x24/0xd0
__driver_attach_async_helper+0x6b/0x110
async_run_entry_fn+0x37/0x170
process_one_work+0x1ac/0x3d0
worker_thread+0x1b8/0x360
kthread+0xf7/0x130
ret_from_fork+0x2d8/0x3a0
ret_from_fork_asm+0x1a/0x30
</TASK>
Fix this by setting dev->hmb_sgt to NULL after freeing it, so the
second call takes the multi-descriptor path which safely handles the
already-cleaned-up state. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix bio leak on mapping failure
The local bio is always NULL, so we'd leak the bio if the integrity
mapping failed. Just get it directly from the request. |
| In the Linux kernel, the following vulnerability has been resolved:
irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT
On PREEMPT_RT, non-HARD irq_work runs in per-CPU kthreads via
run_irq_workd(), so irq_work_sync() uses rcuwait() to wait for BUSY==0.
After irq_work_single() clears BUSY via atomic_cmpxchg(), it still
dereferences @work for irq_work_is_hard() and rcuwait_wake_up().
An irq_work_sync() caller on another CPU that enters after BUSY is cleared
can observe BUSY==0 immediately, return, and free the work before those
accesses complete — causing a use-after-free.
Fix this by wrapping run_irq_workd() in guard(rcu)() so that the entire
irq_work_single() execution is within an RCU read-side critical
section. Then add synchronize_rcu() in irq_work_sync() after
rcuwait_wait_event() to ensure the caller waits for the RCU grace period
before returning, preventing premature frees. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/statmount: fix slab out-of-bounds write in statmount_mnt_idmap
statmount_mnt_idmap() writes one mapping with seq_printf() and then
manually advances seq->count to include the NUL separator.
If seq_printf() overflows, seq_set_overflow() sets seq->count to
seq->size. The manual seq->count++ changes this to seq->size + 1.
seq_has_overflowed() then no longer detects the overflow. The corrupted
count returns to statmount_string(), which later executes:
seq->buf[seq->count++] = '\0';
This causes a 1-byte NULL out-of-bounds write on the dynamically
allocated seq buffer.
Fix this by checking for overflow immediately after seq_printf(). |
| In the Linux kernel, the following vulnerability has been resolved:
fprobe: Fix unregister_fprobe() to wait for RCU grace period
Commit 4346ba1604093 ("fprobe: Rewrite fprobe on function-graph tracer")
changed fprobe to register struct fprobe to an rcu-hlist, but it forgot
to wait for RCU GP. Thus there can be use-after-free if the fprobe is
released right after unregistering. This can be happened on fprobe
event and sample module code.
To fix this issue, add synchronize_rcu() in unregister_fprobe().
Note that BPF is OK because fprobe is used as a part of
bpf_kprobe_multi_link. This unregisters its fprobe in
bpf_kprobe_multi_link_release() and it is deallocated via
bpf_kprobe_multi_link_dealloc(), which is invoked from
bpf_link_defer_dealloc_rcu_gp() RCU callback.
For BPF, this also introduced unregister_fprobe_async() which does
NOT wait for RCU grace priod. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: bridge: eb_tables: close module init race
sashiko reports for unrelated patch:
Does the core ebtables initialization in ebtables.c suffer from a similar race?
Once nf_register_sockopt() completes, the sockopts are exposed globally.
sockopt has to be registered last, just like in ip/ip6/arptables. |
| Incorrect access control in /vfm-admin/ajax/streamvid.php in Veno File Manager Project in 4.4.9 allows an authenticated attacker to read any uploaded files by other users as long as it knows the path and filename via a specially crafted GET request to the affected endpoint. |
| Incorrect access control in the recv_mesh_info_sync function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to force mesh configuration synchronization from an attacker-controlled host via sending a crafted MQTT message to the cs_broker component. |
| Incorrect access control in the informSyncUpgfw function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to mass-trigger firmware update activity across mesh slaves via sending a crafted MQTT message to the cs_broker component. |
