| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| bubblewrap is a low-level unprivileged sandboxing tool. From version 0.11.0 to before version 0.11.2, if bubblewrap is installed in setuid mode then the user can use ptrace to attach to bubblewrap and control the unprivileged part of the sandbox setup phase. This allows the attacker to arbitrarily use the privileged operations, and in particular the "overlay mount" operation, allowing the creation of overlay mounts which is otherwise not allowed in the setuid version of bubblewrap. This issue has been patched in version 0.11.2. |
| When processing HTTP/2 SETTINGS frames, transport will enter an infinite loop of writing CONTINUATION frames if it receives a SETTINGS_MAX_FRAME_SIZE with a value of 0. |
| NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_charset_module module. When charset, source_charset, and charset_map and proxy_pass with disabled buffering ("off") directives are configured, unauthenticated attackers can send requests that with conditions beyond the attackers' control to cause a heap buffer over-read in the NGINX worker process, leading to limited disclosure of memory or a restart.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| When NGINX Plus or NGINX Open Source are configured to use the HTTP/3 QUIC module, an attacker may be able to spoof their source IP address allowing for bypass of authorization or bypass of rate limiting. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| A buffer overflow in dnsmasq’s extract_addresses() function allows an attacker to trigger a heap out-of-bounds read and crash by exploiting a malformed DNS response, enabling extract_name() to advance the pointer past the record’s end. |
| dnsmasqs extract_name() function can be abused to cause a heap buffer overflow, allowing an attacker to inject false DNS cache entries, which could result in DNS lookups to redirect to an attacker-controlled IP address, or to cause a DoS. |
| When sed is invoked with both -i (in-place edit) and --follow-symlinks, the function open_next_file() performs two separate, non-atomic filesystem operations on the same path:
1. resolves symlink to its target and stores the resolved path for determining when output is written,
2. opens the original symlink path (not the resolved one) to read the file.
Between these two calls there is a race window. If an attacker atomically replaces the symlink with a different target during that window, sed will: read content from the new (attacker-chosen) symlink target and write the processed result to the path recorded in step 1. This can lead to arbitrary file overwrite with attacker-controlled content in the context of the sed process.
This issue was fixed in version 4.10. |
| A Denial of Service (DoS) vulnerability in the DNSSEC validation of dnsmasq allows remote attackers to cause a denial of service via a crafted DNS packet. |
| An information disclosure vulnerability in dnsmasq allows remote attackers to bypass source checks via a crafted DNS packet with RFC 7871 client subnet information. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix slab-use-after-free in ext4_split_extent_at()
We hit the following use-after-free:
==================================================================
BUG: KASAN: slab-use-after-free in ext4_split_extent_at+0xba8/0xcc0
Read of size 2 at addr ffff88810548ed08 by task kworker/u20:0/40
CPU: 0 PID: 40 Comm: kworker/u20:0 Not tainted 6.9.0-dirty #724
Call Trace:
<TASK>
kasan_report+0x93/0xc0
ext4_split_extent_at+0xba8/0xcc0
ext4_split_extent.isra.0+0x18f/0x500
ext4_split_convert_extents+0x275/0x750
ext4_ext_handle_unwritten_extents+0x73e/0x1580
ext4_ext_map_blocks+0xe20/0x2dc0
ext4_map_blocks+0x724/0x1700
ext4_do_writepages+0x12d6/0x2a70
[...]
Allocated by task 40:
__kmalloc_noprof+0x1ac/0x480
ext4_find_extent+0xf3b/0x1e70
ext4_ext_map_blocks+0x188/0x2dc0
ext4_map_blocks+0x724/0x1700
ext4_do_writepages+0x12d6/0x2a70
[...]
Freed by task 40:
kfree+0xf1/0x2b0
ext4_find_extent+0xa71/0x1e70
ext4_ext_insert_extent+0xa22/0x3260
ext4_split_extent_at+0x3ef/0xcc0
ext4_split_extent.isra.0+0x18f/0x500
ext4_split_convert_extents+0x275/0x750
ext4_ext_handle_unwritten_extents+0x73e/0x1580
ext4_ext_map_blocks+0xe20/0x2dc0
ext4_map_blocks+0x724/0x1700
ext4_do_writepages+0x12d6/0x2a70
[...]
==================================================================
The flow of issue triggering is as follows:
ext4_split_extent_at
path = *ppath
ext4_ext_insert_extent(ppath)
ext4_ext_create_new_leaf(ppath)
ext4_find_extent(orig_path)
path = *orig_path
read_extent_tree_block
// return -ENOMEM or -EIO
ext4_free_ext_path(path)
kfree(path)
*orig_path = NULL
a. If err is -ENOMEM:
ext4_ext_dirty(path + path->p_depth)
// path use-after-free !!!
b. If err is -EIO and we have EXT_DEBUG defined:
ext4_ext_show_leaf(path)
eh = path[depth].p_hdr
// path also use-after-free !!!
So when trying to zeroout or fix the extent length, call ext4_find_extent()
to update the path.
In addition we use *ppath directly as an ext4_ext_show_leaf() input to
avoid possible use-after-free when EXT_DEBUG is defined, and to avoid
unnecessary path updates. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: aovid use-after-free in ext4_ext_insert_extent()
As Ojaswin mentioned in Link, in ext4_ext_insert_extent(), if the path is
reallocated in ext4_ext_create_new_leaf(), we'll use the stale path and
cause UAF. Below is a sample trace with dummy values:
ext4_ext_insert_extent
path = *ppath = 2000
ext4_ext_create_new_leaf(ppath)
ext4_find_extent(ppath)
path = *ppath = 2000
if (depth > path[0].p_maxdepth)
kfree(path = 2000);
*ppath = path = NULL;
path = kcalloc() = 3000
*ppath = 3000;
return path;
/* here path is still 2000, UAF! */
eh = path[depth].p_hdr
==================================================================
BUG: KASAN: slab-use-after-free in ext4_ext_insert_extent+0x26d4/0x3330
Read of size 8 at addr ffff8881027bf7d0 by task kworker/u36:1/179
CPU: 3 UID: 0 PID: 179 Comm: kworker/u6:1 Not tainted 6.11.0-rc2-dirty #866
Call Trace:
<TASK>
ext4_ext_insert_extent+0x26d4/0x3330
ext4_ext_map_blocks+0xe22/0x2d40
ext4_map_blocks+0x71e/0x1700
ext4_do_writepages+0x1290/0x2800
[...]
Allocated by task 179:
ext4_find_extent+0x81c/0x1f70
ext4_ext_map_blocks+0x146/0x2d40
ext4_map_blocks+0x71e/0x1700
ext4_do_writepages+0x1290/0x2800
ext4_writepages+0x26d/0x4e0
do_writepages+0x175/0x700
[...]
Freed by task 179:
kfree+0xcb/0x240
ext4_find_extent+0x7c0/0x1f70
ext4_ext_insert_extent+0xa26/0x3330
ext4_ext_map_blocks+0xe22/0x2d40
ext4_map_blocks+0x71e/0x1700
ext4_do_writepages+0x1290/0x2800
ext4_writepages+0x26d/0x4e0
do_writepages+0x175/0x700
[...]
==================================================================
So use *ppath to update the path to avoid the above problem. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware_loader: Block path traversal
Most firmware names are hardcoded strings, or are constructed from fairly
constrained format strings where the dynamic parts are just some hex
numbers or such.
However, there are a couple codepaths in the kernel where firmware file
names contain string components that are passed through from a device or
semi-privileged userspace; the ones I could find (not counting interfaces
that require root privileges) are:
- lpfc_sli4_request_firmware_update() seems to construct the firmware
filename from "ModelName", a string that was previously parsed out of
some descriptor ("Vital Product Data") in lpfc_fill_vpd()
- nfp_net_fw_find() seems to construct a firmware filename from a model
name coming from nfp_hwinfo_lookup(pf->hwinfo, "nffw.partno"), which I
think parses some descriptor that was read from the device.
(But this case likely isn't exploitable because the format string looks
like "netronome/nic_%s", and there shouldn't be any *folders* starting
with "netronome/nic_". The previous case was different because there,
the "%s" is *at the start* of the format string.)
- module_flash_fw_schedule() is reachable from the
ETHTOOL_MSG_MODULE_FW_FLASH_ACT netlink command, which is marked as
GENL_UNS_ADMIN_PERM (meaning CAP_NET_ADMIN inside a user namespace is
enough to pass the privilege check), and takes a userspace-provided
firmware name.
(But I think to reach this case, you need to have CAP_NET_ADMIN over a
network namespace that a special kind of ethernet device is mapped into,
so I think this is not a viable attack path in practice.)
Fix it by rejecting any firmware names containing ".." path components.
For what it's worth, I went looking and haven't found any USB device
drivers that use the firmware loader dangerously. |
| A buffer overflow vulnerability in the User-ID™ Authentication Portal (aka Captive Portal) service of Palo Alto Networks PAN-OS software allows an unauthenticated attacker to execute arbitrary code with root privileges on the PA-Series and VM-Series firewalls by sending specially crafted packets.
The risk of this issue is greatly reduced if you secure access to the User-ID™ Authentication Portal per the best practice guidelines https://knowledgebase.paloaltonetworks.com/KCSArticleDetail by restricting access to only trusted internal IP addresses.
Prisma Access, Cloud NGFW and Panorama appliances are not impacted by this vulnerability. |
| A heap-based out-of-bounds read vulnerability in the DNSSEC validation of dnsmasq allows remote attackers to cause a denial of service via a crafted DNS packet. |
| A heap-based out-of-bounds write vulnerability in the DHCPv6 implementation of dnsmasq allows local attackers to execute arbitrary code with root privileges via a crafted DHCPv6 packet. |
| A vulnerability, which was classified as problematic, has been found in GNU Binutils 2.45. Affected by this issue is the function bfd_elf_set_group_contents of the file bfd/elf.c. The manipulation leads to out-of-bounds write. It is possible to launch the attack on the local host. The exploit has been disclosed to the public and may be used. The name of the patch is 41461010eb7c79fee7a9d5f6209accdaac66cc6b. It is recommended to apply a patch to fix this issue. |
| A vulnerability classified as problematic was found in GNU Binutils 2.45. Affected by this vulnerability is the function copy_section of the file binutils/objcopy.c. The manipulation leads to heap-based buffer overflow. Attacking locally is a requirement. The exploit has been disclosed to the public and may be used. The patch is named 08c3cbe5926e4d355b5cb70bbec2b1eeb40c2944. It is recommended to apply a patch to fix this issue. |
| libexpat in Expat before 2.7.2 allows attackers to trigger large dynamic memory allocations via a small document that is submitted for parsing. |
| This issue was addressed with improved memory handling. This issue is fixed in Safari 18.5, iOS 18.5 and iPadOS 18.5, macOS Sequoia 15.5, tvOS 18.5, visionOS 2.5, watchOS 11.5. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: Fix a resource leak related to the scp device in FW initialization
On Mediatek devices with a system companion processor (SCP) the mtk_scp
structure has to be removed explicitly to avoid a resource leak.
Free the structure in case the allocation of the firmware structure fails
during the firmware initialization. |
