| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
x86/fpu: Clear XSTATE_BV[i] in guest XSAVE state whenever XFD[i]=1
When loading guest XSAVE state via KVM_SET_XSAVE, and when updating XFD in
response to a guest WRMSR, clear XFD-disabled features in the saved (or to
be restored) XSTATE_BV to ensure KVM doesn't attempt to load state for
features that are disabled via the guest's XFD. Because the kernel
executes XRSTOR with the guest's XFD, saving XSTATE_BV[i]=1 with XFD[i]=1
will cause XRSTOR to #NM and panic the kernel.
E.g. if fpu_update_guest_xfd() sets XFD without clearing XSTATE_BV:
------------[ cut here ]------------
WARNING: arch/x86/kernel/traps.c:1524 at exc_device_not_available+0x101/0x110, CPU#29: amx_test/848
Modules linked in: kvm_intel kvm irqbypass
CPU: 29 UID: 1000 PID: 848 Comm: amx_test Not tainted 6.19.0-rc2-ffa07f7fd437-x86_amx_nm_xfd_non_init-vm #171 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:exc_device_not_available+0x101/0x110
Call Trace:
<TASK>
asm_exc_device_not_available+0x1a/0x20
RIP: 0010:restore_fpregs_from_fpstate+0x36/0x90
switch_fpu_return+0x4a/0xb0
kvm_arch_vcpu_ioctl_run+0x1245/0x1e40 [kvm]
kvm_vcpu_ioctl+0x2c3/0x8f0 [kvm]
__x64_sys_ioctl+0x8f/0xd0
do_syscall_64+0x62/0x940
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]---
This can happen if the guest executes WRMSR(MSR_IA32_XFD) to set XFD[18] = 1,
and a host IRQ triggers kernel_fpu_begin() prior to the vmexit handler's
call to fpu_update_guest_xfd().
and if userspace stuffs XSTATE_BV[i]=1 via KVM_SET_XSAVE:
------------[ cut here ]------------
WARNING: arch/x86/kernel/traps.c:1524 at exc_device_not_available+0x101/0x110, CPU#14: amx_test/867
Modules linked in: kvm_intel kvm irqbypass
CPU: 14 UID: 1000 PID: 867 Comm: amx_test Not tainted 6.19.0-rc2-2dace9faccd6-x86_amx_nm_xfd_non_init-vm #168 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:exc_device_not_available+0x101/0x110
Call Trace:
<TASK>
asm_exc_device_not_available+0x1a/0x20
RIP: 0010:restore_fpregs_from_fpstate+0x36/0x90
fpu_swap_kvm_fpstate+0x6b/0x120
kvm_load_guest_fpu+0x30/0x80 [kvm]
kvm_arch_vcpu_ioctl_run+0x85/0x1e40 [kvm]
kvm_vcpu_ioctl+0x2c3/0x8f0 [kvm]
__x64_sys_ioctl+0x8f/0xd0
do_syscall_64+0x62/0x940
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]---
The new behavior is consistent with the AMX architecture. Per Intel's SDM,
XSAVE saves XSTATE_BV as '0' for components that are disabled via XFD
(and non-compacted XSAVE saves the initial configuration of the state
component):
If XSAVE, XSAVEC, XSAVEOPT, or XSAVES is saving the state component i,
the instruction does not generate #NM when XCR0[i] = IA32_XFD[i] = 1;
instead, it operates as if XINUSE[i] = 0 (and the state component was
in its initial state): it saves bit i of XSTATE_BV field of the XSAVE
header as 0; in addition, XSAVE saves the initial configuration of the
state component (the other instructions do not save state component i).
Alternatively, KVM could always do XRSTOR with XFD=0, e.g. by using
a constant XFD based on the set of enabled features when XSAVEing for
a struct fpu_guest. However, having XSTATE_BV[i]=1 for XFD-disabled
features can only happen in the above interrupt case, or in similar
scenarios involving preemption on preemptible kernels, because
fpu_swap_kvm_fpstate()'s call to save_fpregs_to_fpstate() saves the
outgoing FPU state with the current XFD; and that is (on all but the
first WRMSR to XFD) the guest XFD.
Therefore, XFD can only go out of sync with XSTATE_BV in the above
interrupt case, or in similar scenarios involving preemption on
preemptible kernels, and it we can consider it (de facto) part of KVM
ABI that KVM_GET_XSAVE returns XSTATE_BV[i]=0 for XFD-disabled features.
[Move clea
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
dst: fix races in rt6_uncached_list_del() and rt_del_uncached_list()
syzbot was able to crash the kernel in rt6_uncached_list_flush_dev()
in an interesting way [1]
Crash happens in list_del_init()/INIT_LIST_HEAD() while writing
list->prev, while the prior write on list->next went well.
static inline void INIT_LIST_HEAD(struct list_head *list)
{
WRITE_ONCE(list->next, list); // This went well
WRITE_ONCE(list->prev, list); // Crash, @list has been freed.
}
Issue here is that rt6_uncached_list_del() did not attempt to lock
ul->lock, as list_empty(&rt->dst.rt_uncached) returned
true because the WRITE_ONCE(list->next, list) happened on the other CPU.
We might use list_del_init_careful() and list_empty_careful(),
or make sure rt6_uncached_list_del() always grabs the spinlock
whenever rt->dst.rt_uncached_list has been set.
A similar fix is neeed for IPv4.
[1]
BUG: KASAN: slab-use-after-free in INIT_LIST_HEAD include/linux/list.h:46 [inline]
BUG: KASAN: slab-use-after-free in list_del_init include/linux/list.h:296 [inline]
BUG: KASAN: slab-use-after-free in rt6_uncached_list_flush_dev net/ipv6/route.c:191 [inline]
BUG: KASAN: slab-use-after-free in rt6_disable_ip+0x633/0x730 net/ipv6/route.c:5020
Write of size 8 at addr ffff8880294cfa78 by task kworker/u8:14/3450
CPU: 0 UID: 0 PID: 3450 Comm: kworker/u8:14 Tainted: G L syzkaller #0 PREEMPT_{RT,(full)}
Tainted: [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
Workqueue: netns cleanup_net
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xca/0x240 mm/kasan/report.c:482
kasan_report+0x118/0x150 mm/kasan/report.c:595
INIT_LIST_HEAD include/linux/list.h:46 [inline]
list_del_init include/linux/list.h:296 [inline]
rt6_uncached_list_flush_dev net/ipv6/route.c:191 [inline]
rt6_disable_ip+0x633/0x730 net/ipv6/route.c:5020
addrconf_ifdown+0x143/0x18a0 net/ipv6/addrconf.c:3853
addrconf_notify+0x1bc/0x1050 net/ipv6/addrconf.c:-1
notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85
call_netdevice_notifiers_extack net/core/dev.c:2268 [inline]
call_netdevice_notifiers net/core/dev.c:2282 [inline]
netif_close_many+0x29c/0x410 net/core/dev.c:1785
unregister_netdevice_many_notify+0xb50/0x2330 net/core/dev.c:12353
ops_exit_rtnl_list net/core/net_namespace.c:187 [inline]
ops_undo_list+0x3dc/0x990 net/core/net_namespace.c:248
cleanup_net+0x4de/0x7b0 net/core/net_namespace.c:696
process_one_work kernel/workqueue.c:3257 [inline]
process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340
worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421
kthread+0x711/0x8a0 kernel/kthread.c:463
ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246
</TASK>
Allocated by task 803:
kasan_save_stack mm/kasan/common.c:57 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:78
unpoison_slab_object mm/kasan/common.c:340 [inline]
__kasan_slab_alloc+0x6c/0x80 mm/kasan/common.c:366
kasan_slab_alloc include/linux/kasan.h:253 [inline]
slab_post_alloc_hook mm/slub.c:4953 [inline]
slab_alloc_node mm/slub.c:5263 [inline]
kmem_cache_alloc_noprof+0x18d/0x6c0 mm/slub.c:5270
dst_alloc+0x105/0x170 net/core/dst.c:89
ip6_dst_alloc net/ipv6/route.c:342 [inline]
icmp6_dst_alloc+0x75/0x460 net/ipv6/route.c:3333
mld_sendpack+0x683/0xe60 net/ipv6/mcast.c:1844
mld_send_cr net/ipv6/mcast.c:2154 [inline]
mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693
process_one_work kernel/workqueue.c:3257 [inline]
process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340
worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421
kthread+0x711/0x8a0 kernel/kthread.c:463
ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entr
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ip6_tunnel: use skb_vlan_inet_prepare() in __ip6_tnl_rcv()
Blamed commit did not take care of VLAN encapsulations
as spotted by syzbot [1].
Use skb_vlan_inet_prepare() instead of pskb_inet_may_pull().
[1]
BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline]
BUG: KMSAN: uninit-value in INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline]
BUG: KMSAN: uninit-value in IP6_ECN_decapsulate+0x7a8/0x1fa0 include/net/inet_ecn.h:321
__INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline]
INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline]
IP6_ECN_decapsulate+0x7a8/0x1fa0 include/net/inet_ecn.h:321
ip6ip6_dscp_ecn_decapsulate+0x16f/0x1b0 net/ipv6/ip6_tunnel.c:729
__ip6_tnl_rcv+0xed9/0x1b50 net/ipv6/ip6_tunnel.c:860
ip6_tnl_rcv+0xc3/0x100 net/ipv6/ip6_tunnel.c:903
gre_rcv+0x1529/0x1b90 net/ipv6/ip6_gre.c:-1
ip6_protocol_deliver_rcu+0x1c89/0x2c60 net/ipv6/ip6_input.c:438
ip6_input_finish+0x1f4/0x4a0 net/ipv6/ip6_input.c:489
NF_HOOK include/linux/netfilter.h:318 [inline]
ip6_input+0x9c/0x330 net/ipv6/ip6_input.c:500
ip6_mc_input+0x7ca/0xc10 net/ipv6/ip6_input.c:590
dst_input include/net/dst.h:474 [inline]
ip6_rcv_finish+0x958/0x990 net/ipv6/ip6_input.c:79
NF_HOOK include/linux/netfilter.h:318 [inline]
ipv6_rcv+0xf1/0x3c0 net/ipv6/ip6_input.c:311
__netif_receive_skb_one_core net/core/dev.c:6139 [inline]
__netif_receive_skb+0x1df/0xac0 net/core/dev.c:6252
netif_receive_skb_internal net/core/dev.c:6338 [inline]
netif_receive_skb+0x57/0x630 net/core/dev.c:6397
tun_rx_batched+0x1df/0x980 drivers/net/tun.c:1485
tun_get_user+0x5c0e/0x6c60 drivers/net/tun.c:1953
tun_chr_write_iter+0x3e9/0x5c0 drivers/net/tun.c:1999
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0xbe2/0x15d0 fs/read_write.c:686
ksys_write fs/read_write.c:738 [inline]
__do_sys_write fs/read_write.c:749 [inline]
__se_sys_write fs/read_write.c:746 [inline]
__x64_sys_write+0x1fb/0x4d0 fs/read_write.c:746
x64_sys_call+0x30ab/0x3e70 arch/x86/include/generated/asm/syscalls_64.h:2
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xd3/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:4960 [inline]
slab_alloc_node mm/slub.c:5263 [inline]
kmem_cache_alloc_node_noprof+0x9e7/0x17a0 mm/slub.c:5315
kmalloc_reserve+0x13c/0x4b0 net/core/skbuff.c:586
__alloc_skb+0x805/0x1040 net/core/skbuff.c:690
alloc_skb include/linux/skbuff.h:1383 [inline]
alloc_skb_with_frags+0xc5/0xa60 net/core/skbuff.c:6712
sock_alloc_send_pskb+0xacc/0xc60 net/core/sock.c:2995
tun_alloc_skb drivers/net/tun.c:1461 [inline]
tun_get_user+0x1142/0x6c60 drivers/net/tun.c:1794
tun_chr_write_iter+0x3e9/0x5c0 drivers/net/tun.c:1999
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0xbe2/0x15d0 fs/read_write.c:686
ksys_write fs/read_write.c:738 [inline]
__do_sys_write fs/read_write.c:749 [inline]
__se_sys_write fs/read_write.c:746 [inline]
__x64_sys_write+0x1fb/0x4d0 fs/read_write.c:746
x64_sys_call+0x30ab/0x3e70 arch/x86/include/generated/asm/syscalls_64.h:2
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xd3/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
CPU: 0 UID: 0 PID: 6465 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(none)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 |
| In the Linux kernel, the following vulnerability has been resolved:
net: can: j1939: j1939_xtp_rx_rts_session_active(): deactivate session upon receiving the second rts
Since j1939_session_deactivate_activate_next() in j1939_tp_rxtimer() is
called only when the timer is enabled, we need to call
j1939_session_deactivate_activate_next() if we cancelled the timer.
Otherwise, refcount for j1939_session leaks, which will later appear as
| unregister_netdevice: waiting for vcan0 to become free. Usage count = 2.
problem. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: return the handler error from mon_handle_auth_done()
Currently any error from ceph_auth_handle_reply_done() is propagated
via finish_auth() but isn't returned from mon_handle_auth_done(). This
results in higher layers learning that (despite the monitor considering
us to be successfully authenticated) something went wrong in the
authentication phase and reacting accordingly, but msgr2 still trying
to proceed with establishing the session in the background. In the
case of secure mode this can trigger a WARN in setup_crypto() and later
lead to a NULL pointer dereference inside of prepare_auth_signature(). |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: replace overzealous BUG_ON in osdmap_apply_incremental()
If the osdmap is (maliciously) corrupted such that the incremental
osdmap epoch is different from what is expected, there is no need to
BUG. Instead, just declare the incremental osdmap to be invalid. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: provide locking for v4_end_grace
Writing to v4_end_grace can race with server shutdown and result in
memory being accessed after it was freed - reclaim_str_hashtbl in
particularly.
We cannot hold nfsd_mutex across the nfsd4_end_grace() call as that is
held while client_tracking_op->init() is called and that can wait for
an upcall to nfsdcltrack which can write to v4_end_grace, resulting in a
deadlock.
nfsd4_end_grace() is also called by the landromat work queue and this
doesn't require locking as server shutdown will stop the work and wait
for it before freeing anything that nfsd4_end_grace() might access.
However, we must be sure that writing to v4_end_grace doesn't restart
the work item after shutdown has already waited for it. For this we
add a new flag protected with nn->client_lock. It is set only while it
is safe to make client tracking calls, and v4_end_grace only schedules
work while the flag is set with the spinlock held.
So this patch adds a nfsd_net field "client_tracking_active" which is
set as described. Another field "grace_end_forced", is set when
v4_end_grace is written. After this is set, and providing
client_tracking_active is set, the laundromat is scheduled.
This "grace_end_forced" field bypasses other checks for whether the
grace period has finished.
This resolves a race which can result in use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sock: fix hardened usercopy panic in sock_recv_errqueue
skbuff_fclone_cache was created without defining a usercopy region,
[1] unlike skbuff_head_cache which properly whitelists the cb[] field.
[2] This causes a usercopy BUG() when CONFIG_HARDENED_USERCOPY is
enabled and the kernel attempts to copy sk_buff.cb data to userspace
via sock_recv_errqueue() -> put_cmsg().
The crash occurs when: 1. TCP allocates an skb using alloc_skb_fclone()
(from skbuff_fclone_cache) [1]
2. The skb is cloned via skb_clone() using the pre-allocated fclone
[3] 3. The cloned skb is queued to sk_error_queue for timestamp
reporting 4. Userspace reads the error queue via recvmsg(MSG_ERRQUEUE)
5. sock_recv_errqueue() calls put_cmsg() to copy serr->ee from skb->cb
[4] 6. __check_heap_object() fails because skbuff_fclone_cache has no
usercopy whitelist [5]
When cloned skbs allocated from skbuff_fclone_cache are used in the
socket error queue, accessing the sock_exterr_skb structure in skb->cb
via put_cmsg() triggers a usercopy hardening violation:
[ 5.379589] usercopy: Kernel memory exposure attempt detected from SLUB object 'skbuff_fclone_cache' (offset 296, size 16)!
[ 5.382796] kernel BUG at mm/usercopy.c:102!
[ 5.383923] Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
[ 5.384903] CPU: 1 UID: 0 PID: 138 Comm: poc_put_cmsg Not tainted 6.12.57 #7
[ 5.384903] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 5.384903] RIP: 0010:usercopy_abort+0x6c/0x80
[ 5.384903] Code: 1a 86 51 48 c7 c2 40 15 1a 86 41 52 48 c7 c7 c0 15 1a 86 48 0f 45 d6 48 c7 c6 80 15 1a 86 48 89 c1 49 0f 45 f3 e8 84 27 88 ff <0f> 0b 490
[ 5.384903] RSP: 0018:ffffc900006f77a8 EFLAGS: 00010246
[ 5.384903] RAX: 000000000000006f RBX: ffff88800f0ad2a8 RCX: 1ffffffff0f72e74
[ 5.384903] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff87b973a0
[ 5.384903] RBP: 0000000000000010 R08: 0000000000000000 R09: fffffbfff0f72e74
[ 5.384903] R10: 0000000000000003 R11: 79706f6372657375 R12: 0000000000000001
[ 5.384903] R13: ffff88800f0ad2b8 R14: ffffea00003c2b40 R15: ffffea00003c2b00
[ 5.384903] FS: 0000000011bc4380(0000) GS:ffff8880bf100000(0000) knlGS:0000000000000000
[ 5.384903] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5.384903] CR2: 000056aa3b8e5fe4 CR3: 000000000ea26004 CR4: 0000000000770ef0
[ 5.384903] PKRU: 55555554
[ 5.384903] Call Trace:
[ 5.384903] <TASK>
[ 5.384903] __check_heap_object+0x9a/0xd0
[ 5.384903] __check_object_size+0x46c/0x690
[ 5.384903] put_cmsg+0x129/0x5e0
[ 5.384903] sock_recv_errqueue+0x22f/0x380
[ 5.384903] tls_sw_recvmsg+0x7ed/0x1960
[ 5.384903] ? srso_alias_return_thunk+0x5/0xfbef5
[ 5.384903] ? schedule+0x6d/0x270
[ 5.384903] ? srso_alias_return_thunk+0x5/0xfbef5
[ 5.384903] ? mutex_unlock+0x81/0xd0
[ 5.384903] ? __pfx_mutex_unlock+0x10/0x10
[ 5.384903] ? __pfx_tls_sw_recvmsg+0x10/0x10
[ 5.384903] ? _raw_spin_lock_irqsave+0x8f/0xf0
[ 5.384903] ? _raw_read_unlock_irqrestore+0x20/0x40
[ 5.384903] ? srso_alias_return_thunk+0x5/0xfbef5
The crash offset 296 corresponds to skb2->cb within skbuff_fclones:
- sizeof(struct sk_buff) = 232 - offsetof(struct sk_buff, cb) = 40 -
offset of skb2.cb in fclones = 232 + 40 = 272 - crash offset 296 =
272 + 24 (inside sock_exterr_skb.ee)
This patch uses a local stack variable as a bounce buffer to avoid the hardened usercopy check failure.
[1] https://elixir.bootlin.com/linux/v6.12.62/source/net/ipv4/tcp.c#L885
[2] https://elixir.bootlin.com/linux/v6.12.62/source/net/core/skbuff.c#L5104
[3] https://elixir.bootlin.com/linux/v6.12.62/source/net/core/skbuff.c#L5566
[4] https://elixir.bootlin.com/linux/v6.12.62/source/net/core/skbuff.c#L5491
[5] https://elixir.bootlin.com/linux/v6.12.62/source/mm/slub.c#L5719 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix reservation leak in some error paths when inserting inline extent
If we fail to allocate a path or join a transaction, we return from
__cow_file_range_inline() without freeing the reserved qgroup data,
resulting in a leak. Fix this by ensuring we call btrfs_qgroup_free_data()
in such cases. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Delay module unload while fabric scan in progress
System crash seen during load/unload test in a loop.
[105954.384919] RBP: ffff914589838dc0 R08: 0000000000000000 R09: 0000000000000086
[105954.384920] R10: 000000000000000f R11: ffffa31240904be5 R12: ffff914605f868e0
[105954.384921] R13: ffff914605f86910 R14: 0000000000008010 R15: 00000000ddb7c000
[105954.384923] FS: 0000000000000000(0000) GS:ffff9163fec40000(0000) knlGS:0000000000000000
[105954.384925] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[105954.384926] CR2: 000055d31ce1d6a0 CR3: 0000000119f5e001 CR4: 0000000000770ee0
[105954.384928] PKRU: 55555554
[105954.384929] Call Trace:
[105954.384931] <IRQ>
[105954.384934] qla24xx_sp_unmap+0x1f3/0x2a0 [qla2xxx]
[105954.384962] ? qla_async_scan_sp_done+0x114/0x1f0 [qla2xxx]
[105954.384980] ? qla24xx_els_ct_entry+0x4de/0x760 [qla2xxx]
[105954.384999] ? __wake_up_common+0x80/0x190
[105954.385004] ? qla24xx_process_response_queue+0xc2/0xaa0 [qla2xxx]
[105954.385023] ? qla24xx_msix_rsp_q+0x44/0xb0 [qla2xxx]
[105954.385040] ? __handle_irq_event_percpu+0x3d/0x190
[105954.385044] ? handle_irq_event+0x58/0xb0
[105954.385046] ? handle_edge_irq+0x93/0x240
[105954.385050] ? __common_interrupt+0x41/0xa0
[105954.385055] ? common_interrupt+0x3e/0xa0
[105954.385060] ? asm_common_interrupt+0x22/0x40
The root cause of this was that there was a free (dma_free_attrs) in the
interrupt context. There was a device discovery/fabric scan in
progress. A module unload was issued which set the UNLOADING flag. As
part of the discovery, after receiving an interrupt a work queue was
scheduled (which involved a work to be queued). Since the UNLOADING
flag is set, the work item was not allocated and the mapped memory had
to be freed. The free occurred in interrupt context leading to system
crash. Delay the driver unload until the fabric scan is complete to
avoid the crash. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Free sp in error path to fix system crash
System crash seen during load/unload test in a loop,
[61110.449331] qla2xxx [0000:27:00.0]-0042:0: Disabled MSI-X.
[61110.467494] =============================================================================
[61110.467498] BUG qla2xxx_srbs (Tainted: G OE -------- --- ): Objects remaining in qla2xxx_srbs on __kmem_cache_shutdown()
[61110.467501] -----------------------------------------------------------------------------
[61110.467502] Slab 0x000000000ffc8162 objects=51 used=1 fp=0x00000000e25d3d85 flags=0x57ffffc0010200(slab|head|node=1|zone=2|lastcpupid=0x1fffff)
[61110.467509] CPU: 53 PID: 455206 Comm: rmmod Kdump: loaded Tainted: G OE -------- --- 5.14.0-284.11.1.el9_2.x86_64 #1
[61110.467513] Hardware name: HPE ProLiant DL385 Gen10 Plus v2/ProLiant DL385 Gen10 Plus v2, BIOS A42 08/17/2023
[61110.467515] Call Trace:
[61110.467516] <TASK>
[61110.467519] dump_stack_lvl+0x34/0x48
[61110.467526] slab_err.cold+0x53/0x67
[61110.467534] __kmem_cache_shutdown+0x16e/0x320
[61110.467540] kmem_cache_destroy+0x51/0x160
[61110.467544] qla2x00_module_exit+0x93/0x99 [qla2xxx]
[61110.467607] ? __do_sys_delete_module.constprop.0+0x178/0x280
[61110.467613] ? syscall_trace_enter.constprop.0+0x145/0x1d0
[61110.467616] ? do_syscall_64+0x5c/0x90
[61110.467619] ? exc_page_fault+0x62/0x150
[61110.467622] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd
[61110.467626] </TASK>
[61110.467627] Disabling lock debugging due to kernel taint
[61110.467635] Object 0x0000000026f7e6e6 @offset=16000
[61110.467639] ------------[ cut here ]------------
[61110.467639] kmem_cache_destroy qla2xxx_srbs: Slab cache still has objects when called from qla2x00_module_exit+0x93/0x99 [qla2xxx]
[61110.467659] WARNING: CPU: 53 PID: 455206 at mm/slab_common.c:520 kmem_cache_destroy+0x14d/0x160
[61110.467718] CPU: 53 PID: 455206 Comm: rmmod Kdump: loaded Tainted: G B OE -------- --- 5.14.0-284.11.1.el9_2.x86_64 #1
[61110.467720] Hardware name: HPE ProLiant DL385 Gen10 Plus v2/ProLiant DL385 Gen10 Plus v2, BIOS A42 08/17/2023
[61110.467721] RIP: 0010:kmem_cache_destroy+0x14d/0x160
[61110.467724] Code: 99 7d 07 00 48 89 ef e8 e1 6a 07 00 eb b3 48 8b 55 60 48 8b 4c 24 20 48 c7 c6 70 fc 66 90 48 c7 c7 f8 ef a1 90 e8 e1 ed 7c 00 <0f> 0b eb 93 c3 cc cc cc cc 66 2e 0f 1f 84 00 00 00 00 00 55 48 89
[61110.467725] RSP: 0018:ffffa304e489fe80 EFLAGS: 00010282
[61110.467727] RAX: 0000000000000000 RBX: ffffffffc0d9a860 RCX: 0000000000000027
[61110.467729] RDX: ffff8fd5ff9598a8 RSI: 0000000000000001 RDI: ffff8fd5ff9598a0
[61110.467730] RBP: ffff8fb6aaf78700 R08: 0000000000000000 R09: 0000000100d863b7
[61110.467731] R10: ffffa304e489fd20 R11: ffffffff913bef48 R12: 0000000040002000
[61110.467731] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[61110.467733] FS: 00007f64c89fb740(0000) GS:ffff8fd5ff940000(0000) knlGS:0000000000000000
[61110.467734] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[61110.467735] CR2: 00007f0f02bfe000 CR3: 00000020ad6dc005 CR4: 0000000000770ee0
[61110.467736] PKRU: 55555554
[61110.467737] Call Trace:
[61110.467738] <TASK>
[61110.467739] qla2x00_module_exit+0x93/0x99 [qla2xxx]
[61110.467755] ? __do_sys_delete_module.constprop.0+0x178/0x280
Free sp in the error path to fix the crash. |
| In the Linux kernel, the following vulnerability has been resolved:
md: suspend array while updating raid_disks via sysfs
In raid1_reshape(), freeze_array() is called before modifying the r1bio
memory pool (conf->r1bio_pool) and conf->raid_disks, and
unfreeze_array() is called after the update is completed.
However, freeze_array() only waits until nr_sync_pending and
(nr_pending - nr_queued) of all buckets reaches zero. When an I/O error
occurs, nr_queued is increased and the corresponding r1bio is queued to
either retry_list or bio_end_io_list. As a result, freeze_array() may
unblock before these r1bios are released.
This can lead to a situation where conf->raid_disks and the mempool have
already been updated while queued r1bios, allocated with the old
raid_disks value, are later released. Consequently, free_r1bio() may
access memory out of bounds in put_all_bios() and release r1bios of the
wrong size to the new mempool, potentially causing issues with the
mempool as well.
Since only normal I/O might increase nr_queued while an I/O error occurs,
suspending the array avoids this issue.
Note: Updating raid_disks via ioctl SET_ARRAY_INFO already suspends
the array. Therefore, we suspend the array when updating raid_disks
via sysfs to avoid this issue too. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/sva: invalidate stale IOTLB entries for kernel address space
Introduce a new IOMMU interface to flush IOTLB paging cache entries for
the CPU kernel address space. This interface is invoked from the x86
architecture code that manages combined user and kernel page tables,
specifically before any kernel page table page is freed and reused.
This addresses the main issue with vfree() which is a common occurrence
and can be triggered by unprivileged users. While this resolves the
primary problem, it doesn't address some extremely rare case related to
memory unplug of memory that was present as reserved memory at boot, which
cannot be triggered by unprivileged users. The discussion can be found at
the link below.
Enable SVA on x86 architecture since the IOMMU can now receive
notification to flush the paging cache before freeing the CPU kernel page
table pages. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix deadlock in wait_current_trans() due to ignored transaction type
When wait_current_trans() is called during start_transaction(), it
currently waits for a blocked transaction without considering whether
the given transaction type actually needs to wait for that particular
transaction state. The btrfs_blocked_trans_types[] array already defines
which transaction types should wait for which transaction states, but
this check was missing in wait_current_trans().
This can lead to a deadlock scenario involving two transactions and
pending ordered extents:
1. Transaction A is in TRANS_STATE_COMMIT_DOING state
2. A worker processing an ordered extent calls start_transaction()
with TRANS_JOIN
3. join_transaction() returns -EBUSY because Transaction A is in
TRANS_STATE_COMMIT_DOING
4. Transaction A moves to TRANS_STATE_UNBLOCKED and completes
5. A new Transaction B is created (TRANS_STATE_RUNNING)
6. The ordered extent from step 2 is added to Transaction B's
pending ordered extents
7. Transaction B immediately starts commit by another task and
enters TRANS_STATE_COMMIT_START
8. The worker finally reaches wait_current_trans(), sees Transaction B
in TRANS_STATE_COMMIT_START (a blocked state), and waits
unconditionally
9. However, TRANS_JOIN should NOT wait for TRANS_STATE_COMMIT_START
according to btrfs_blocked_trans_types[]
10. Transaction B is waiting for pending ordered extents to complete
11. Deadlock: Transaction B waits for ordered extent, ordered extent
waits for Transaction B
This can be illustrated by the following call stacks:
CPU0 CPU1
btrfs_finish_ordered_io()
start_transaction(TRANS_JOIN)
join_transaction()
# -EBUSY (Transaction A is
# TRANS_STATE_COMMIT_DOING)
# Transaction A completes
# Transaction B created
# ordered extent added to
# Transaction B's pending list
btrfs_commit_transaction()
# Transaction B enters
# TRANS_STATE_COMMIT_START
# waiting for pending ordered
# extents
wait_current_trans()
# waits for Transaction B
# (should not wait!)
Task bstore_kv_sync in btrfs_commit_transaction waiting for ordered
extents:
__schedule+0x2e7/0x8a0
schedule+0x64/0xe0
btrfs_commit_transaction+0xbf7/0xda0 [btrfs]
btrfs_sync_file+0x342/0x4d0 [btrfs]
__x64_sys_fdatasync+0x4b/0x80
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Task kworker in wait_current_trans waiting for transaction commit:
Workqueue: btrfs-syno_nocow btrfs_work_helper [btrfs]
__schedule+0x2e7/0x8a0
schedule+0x64/0xe0
wait_current_trans+0xb0/0x110 [btrfs]
start_transaction+0x346/0x5b0 [btrfs]
btrfs_finish_ordered_io.isra.0+0x49b/0x9c0 [btrfs]
btrfs_work_helper+0xe8/0x350 [btrfs]
process_one_work+0x1d3/0x3c0
worker_thread+0x4d/0x3e0
kthread+0x12d/0x150
ret_from_fork+0x1f/0x30
Fix this by passing the transaction type to wait_current_trans() and
checking btrfs_blocked_trans_types[cur_trans->state] against the given
type before deciding to wait. This ensures that transaction types which
are allowed to join during certain blocked states will not unnecessarily
wait and cause deadlocks. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: bcm-sba-raid: fix device leak on probe
Make sure to drop the reference taken when looking up the mailbox device
during probe on probe failures and on driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: always detect conflicting inodes when logging inode refs
After rename exchanging (either with the rename exchange operation or
regular renames in multiple non-atomic steps) two inodes and at least
one of them is a directory, we can end up with a log tree that contains
only of the inodes and after a power failure that can result in an attempt
to delete the other inode when it should not because it was not deleted
before the power failure. In some case that delete attempt fails when
the target inode is a directory that contains a subvolume inside it, since
the log replay code is not prepared to deal with directory entries that
point to root items (only inode items).
1) We have directories "dir1" (inode A) and "dir2" (inode B) under the
same parent directory;
2) We have a file (inode C) under directory "dir1" (inode A);
3) We have a subvolume inside directory "dir2" (inode B);
4) All these inodes were persisted in a past transaction and we are
currently at transaction N;
5) We rename the file (inode C), so at btrfs_log_new_name() we update
inode C's last_unlink_trans to N;
6) We get a rename exchange for "dir1" (inode A) and "dir2" (inode B),
so after the exchange "dir1" is inode B and "dir2" is inode A.
During the rename exchange we call btrfs_log_new_name() for inodes
A and B, but because they are directories, we don't update their
last_unlink_trans to N;
7) An fsync against the file (inode C) is done, and because its inode
has a last_unlink_trans with a value of N we log its parent directory
(inode A) (through btrfs_log_all_parents(), called from
btrfs_log_inode_parent()).
8) So we end up with inode B not logged, which now has the old name
of inode A. At copy_inode_items_to_log(), when logging inode A, we
did not check if we had any conflicting inode to log because inode
A has a generation lower than the current transaction (created in
a past transaction);
9) After a power failure, when replaying the log tree, since we find that
inode A has a new name that conflicts with the name of inode B in the
fs tree, we attempt to delete inode B... this is wrong since that
directory was never deleted before the power failure, and because there
is a subvolume inside that directory, attempting to delete it will fail
since replay_dir_deletes() and btrfs_unlink_inode() are not prepared
to deal with dir items that point to roots instead of inodes.
When that happens the mount fails and we get a stack trace like the
following:
[87.2314] BTRFS info (device dm-0): start tree-log replay
[87.2318] BTRFS critical (device dm-0): failed to delete reference to subvol, root 5 inode 256 parent 259
[87.2332] ------------[ cut here ]------------
[87.2338] BTRFS: Transaction aborted (error -2)
[87.2346] WARNING: CPU: 1 PID: 638968 at fs/btrfs/inode.c:4345 __btrfs_unlink_inode+0x416/0x440 [btrfs]
[87.2368] Modules linked in: btrfs loop dm_thin_pool (...)
[87.2470] CPU: 1 UID: 0 PID: 638968 Comm: mount Tainted: G W 6.18.0-rc7-btrfs-next-218+ #2 PREEMPT(full)
[87.2489] Tainted: [W]=WARN
[87.2494] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[87.2514] RIP: 0010:__btrfs_unlink_inode+0x416/0x440 [btrfs]
[87.2538] Code: c0 89 04 24 (...)
[87.2568] RSP: 0018:ffffc0e741f4b9b8 EFLAGS: 00010286
[87.2574] RAX: 0000000000000000 RBX: ffff9d3ec8a6cf60 RCX: 0000000000000000
[87.2582] RDX: 0000000000000002 RSI: ffffffff84ab45a1 RDI: 00000000ffffffff
[87.2591] RBP: ffff9d3ec8a6ef20 R08: 0000000000000000 R09: ffffc0e741f4b840
[87.2599] R10: ffff9d45dc1fffa8 R11: 0000000000000003 R12: ffff9d3ee26d77e0
[87.2608] R13: ffffc0e741f4ba98 R14: ffff9d4458040800 R15: ffff9d44b6b7ca10
[87.2618] FS: 00007f7b9603a840(0000) GS:ffff9d4658982000(0000) knlGS:0000000000000000
[87.
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
can: j1939: make j1939_session_activate() fail if device is no longer registered
syzbot is still reporting
unregister_netdevice: waiting for vcan0 to become free. Usage count = 2
even after commit 93a27b5891b8 ("can: j1939: add missing calls in
NETDEV_UNREGISTER notification handler") was added. A debug printk() patch
found that j1939_session_activate() can succeed even after
j1939_cancel_active_session() from j1939_netdev_notify(NETDEV_UNREGISTER)
has completed.
Since j1939_cancel_active_session() is processed with the session list lock
held, checking ndev->reg_state in j1939_session_activate() with the session
list lock held can reliably close the race window. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-verity: disable recursive forward error correction
There are two problems with the recursive correction:
1. It may cause denial-of-service. In fec_read_bufs, there is a loop that
has 253 iterations. For each iteration, we may call verity_hash_for_block
recursively. There is a limit of 4 nested recursions - that means that
there may be at most 253^4 (4 billion) iterations. Red Hat QE team
actually created an image that pushes dm-verity to this limit - and this
image just makes the udev-worker process get stuck in the 'D' state.
2. It doesn't work. In fec_read_bufs we store data into the variable
"fio->bufs", but fio bufs is shared between recursive invocations, if
"verity_hash_for_block" invoked correction recursively, it would
overwrite partially filled fio->bufs. |
| In the Linux kernel, the following vulnerability has been resolved:
smc91x: fix broken irq-context in PREEMPT_RT
When smc91x.c is built with PREEMPT_RT, the following splat occurs
in FVP_RevC:
[ 13.055000] smc91x LNRO0003:00 eth0: link up, 10Mbps, half-duplex, lpa 0x0000
[ 13.062137] BUG: workqueue leaked atomic, lock or RCU: kworker/2:1[106]
[ 13.062137] preempt=0x00000000 lock=0->0 RCU=0->1 workfn=mld_ifc_work
[ 13.062266] C
** replaying previous printk message **
[ 13.062266] CPU: 2 UID: 0 PID: 106 Comm: kworker/2:1 Not tainted 6.18.0-dirty #179 PREEMPT_{RT,(full)}
[ 13.062353] Hardware name: , BIOS
[ 13.062382] Workqueue: mld mld_ifc_work
[ 13.062469] Call trace:
[ 13.062494] show_stack+0x24/0x40 (C)
[ 13.062602] __dump_stack+0x28/0x48
[ 13.062710] dump_stack_lvl+0x7c/0xb0
[ 13.062818] dump_stack+0x18/0x34
[ 13.062926] process_scheduled_works+0x294/0x450
[ 13.063043] worker_thread+0x260/0x3d8
[ 13.063124] kthread+0x1c4/0x228
[ 13.063235] ret_from_fork+0x10/0x20
This happens because smc_special_trylock() disables IRQs even on PREEMPT_RT,
but smc_special_unlock() does not restore IRQs on PREEMPT_RT.
The reason is that smc_special_unlock() calls spin_unlock_irqrestore(),
and rcu_read_unlock_bh() in __dev_queue_xmit() cannot invoke
rcu_read_unlock() through __local_bh_enable_ip() when current->softirq_disable_cnt becomes zero.
To address this issue, replace smc_special_trylock() with spin_trylock_irqsave(). |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: seqiv - Do not use req->iv after crypto_aead_encrypt
As soon as crypto_aead_encrypt is called, the underlying request
may be freed by an asynchronous completion. Thus dereferencing
req->iv after it returns is invalid.
Instead of checking req->iv against info, create a new variable
unaligned_info and use it for that purpose instead. |
