| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix NULL pointer dereference in __unix_needs_revalidation
When receiving file descriptors via SCM_RIGHTS, both the socket pointer
and the socket's sk pointer can be NULL during socket setup or teardown,
causing NULL pointer dereferences in __unix_needs_revalidation().
This is a regression in AppArmor 5.0.0 (kernel 6.17+) where the new
__unix_needs_revalidation() function was added without proper NULL checks.
The crash manifests as:
BUG: kernel NULL pointer dereference, address: 0x0000000000000018
RIP: aa_file_perm+0xb7/0x3b0 (or +0xbe/0x3b0, +0xc0/0x3e0)
Call Trace:
apparmor_file_receive+0x42/0x80
security_file_receive+0x2e/0x50
receive_fd+0x1d/0xf0
scm_detach_fds+0xad/0x1c0
The function dereferences sock->sk->sk_family without checking if either
sock or sock->sk is NULL first.
Add NULL checks for both sock and sock->sk before accessing sk_family. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Return proper address for non-zero offsets in insn array
The map_direct_value_addr() function of the instruction
array map incorrectly adds offset to the resulting address.
This is a bug, because later the resolve_pseudo_ldimm64()
function adds the offset. Fix it. Corresponding selftests
are added in a consequent commit. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: playstation: Add missing check for input_ff_create_memless
The ps_gamepad_create() function calls input_ff_create_memless()
without verifying its return value, which can lead to incorrect
behavior or potential crashes when FF effects are triggered.
Add a check for the return value of input_ff_create_memless(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Limit bpf program signature size
Practical BPF signatures are significantly smaller than
KMALLOC_MAX_CACHE_SIZE
Allowing larger sizes opens the door for abuse by passing excessive
size values and forcing the kernel into expensive allocation paths (via
kmalloc_large or vmalloc). |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: use READ_ONCE() to read struct ublksrv_ctrl_cmd
struct ublksrv_ctrl_cmd is part of the io_uring_sqe, which may lie in
userspace-mapped memory. It's racy to access its fields with normal
loads, as userspace may write to them concurrently. Use READ_ONCE() to
copy the ublksrv_ctrl_cmd from the io_uring_sqe to the stack. Use the
local copy in place of the one in the io_uring_sqe. |
| In the Linux kernel, the following vulnerability has been resolved:
fbnic: close fw_log race between users and teardown
Fixes a theoretical race on fw_log between the teardown path and fw_log
write functions.
fw_log is written inside fbnic_fw_log_write() and can be reached from
the mailbox handler fbnic_fw_msix_intr(), but fw_log is freed before
IRQ/MBX teardown during cleanup, resulting in a potential data race of
dereferencing a freed/null variable.
Possible Interleaving Scenario:
CPU0: fbnic_fw_msix_intr() // Entry
fbnic_fw_log_write()
if (fbnic_fw_log_ready()) // true
... preempt ...
CPU1: fbnic_remove() // Entry
fbnic_fw_log_free()
vfree(log->data_start);
log->data_start = NULL;
CPU0: continues, walks log->entries or writes to log->data_start
The initialization also has an incorrect order problem, as the fw_log
is currently allocated after MBX setup during initialization.
Fix the problems by adjusting the synchronization order to put
initialization in place before the mailbox is enabled, and not cleared
until after the mailbox has been disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: greybus: lights: avoid NULL deref
gb_lights_light_config() stores channel_count before allocating the
channels array. If kcalloc() fails, gb_lights_release() iterates the
non-zero count and dereferences light->channels, which is NULL.
Allocate channels first and only then publish channels_count so the
cleanup path can't walk a NULL pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Stop job scheduling across aie2_release_resource()
Running jobs on a hardware context while it is in the process of
releasing resources can lead to use-after-free and crashes.
Fix this by stopping job scheduling before calling
aie2_release_resource() and restarting it after the release completes.
Additionally, aie2_sched_job_run() now checks whether the hardware
context is still active. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: ab8500: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Commit 1c1f13a006ed ("power: supply: ab8500: Move to componentized
binding") introduced this issue during a refactorization. Fix this racy
use-after-free by making sure the IRQ is requested _after_ the
registration of the `power_supply` handle. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: starfive - Fix memory leak in starfive_aes_aead_do_one_req()
The starfive_aes_aead_do_one_req() function allocates rctx->adata with
kzalloc() but fails to free it if sg_copy_to_buffer() or
starfive_aes_hw_init() fails, which lead to memory leaks.
Since rctx->adata is unconditionally freed after the write_adata
operations, ensure consistent cleanup by freeing the allocation in these
earlier error paths as well.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: au1200fb: Fix a memory leak in au1200fb_drv_probe()
In au1200fb_drv_probe(), when platform_get_irq fails(), it directly
returns from the function with an error code, which causes a memory
leak.
Replace it with a goto label to ensure proper cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: Validate SQE128 flag before accessing the cmd
ublk_ctrl_cmd_dump() accesses (header *)sqe->cmd before
IO_URING_F_SQE128 flag check. This could cause out of boundary memory
access.
Move the SQE128 flag check earlier in ublk_ctrl_uring_cmd() to return
-EINVAL immediately if the flag is not set. |
| Improper Control of Generation of Code ('Code Injection') vulnerability in Edgar Rojas WooCommerce PDF Invoice Builder allows Remote Code Inclusion.
This issue affects WooCommerce PDF Invoice Builder: from n/a through 2.0.8. |
| Subscriber SQL Injection in GamiPress <= 7.8.7 versions. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: fbnic: Add validation for MTU changes
Increasing the MTU beyond the HDS threshold causes the hardware to
fragment packets across multiple buffers. If a single-buffer XDP program
is attached, the driver will drop all multi-frag frames. While we can't
prevent a remote sender from sending non-TCP packets larger than the MTU,
this will prevent users from inadvertently breaking new TCP streams.
Traditionally, drivers supported XDP with MTU less than 4Kb
(packet per page). Fbnic currently prevents attaching XDP when MTU is too high.
But it does not prevent increasing MTU after XDP is attached. |
| An authentication bypass vulnerability exists in MISP when LDAP mixed authentication is enabled with OTP enforcement. In deployments configured with LdapAuth.mixedAuth=true and Security.require_otp=true, users authenticated through an authentication plugin, such as LDAP, may have their authenticated session established during the application beforeFilter phase before the normal login flow enforces the OTP challenge.
As a result, an attacker with valid primary authentication credentials could bypass the required OTP step by authenticating through the plugin-backed login flow and then directly accessing another application URL instead of completing the OTP verification page. This allows access to the application as the affected user without providing a valid TOTP, HOTP, or email OTP code.
The issue affects configurations where plugin-based authentication is enabled and OTP is expected to be mandatory. The fix ensures that OTP requirements are checked immediately after plugin authentication and before the user session is established, redirecting users to the appropriate OTP challenge when required. |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: fix deadlock in jbd2_journal_cancel_revoke()
Commit f76d4c28a46a ("fs/jbd2: use sleeping version of
__find_get_block()") changed jbd2_journal_cancel_revoke() to use
__find_get_block_nonatomic() which holds the folio lock instead of
i_private_lock. This breaks the lock ordering (folio -> buffer) and
causes an ABBA deadlock when the filesystem blocksize < pagesize:
T1 T2
ext4_mkdir()
ext4_init_new_dir()
ext4_append()
ext4_getblk()
lock_buffer() <- A
sync_blockdev()
blkdev_writepages()
writeback_iter()
writeback_get_folio()
folio_lock() <- B
ext4_journal_get_create_access()
jbd2_journal_cancel_revoke()
__find_get_block_nonatomic()
folio_lock() <- B
block_write_full_folio()
lock_buffer() <- A
This can occasionally cause generic/013 to hang.
Fix by only calling __find_get_block_nonatomic() when the passed
buffer_head doesn't belong to the bdev, which is the only case that we
need to look up its bdev alias. Otherwise, the lookup is redundant since
the found buffer_head is equal to the one we passed in. |
| OpenClaw before 2026.5.18 contains a policy enforcement vulnerability in system.run safe-bin allowlist validation that allows shell expansion to modify command interpretation on POSIX nodes. Authenticated operators can exploit shell metacharacters in approved commands to read unintended node-local files and expose sensitive configuration data. |
| OpenClaw before 2026.4.29 contains an authorization bypass vulnerability in the QQBot streaming command that allows authenticated senders to mutate configuration without explicit allowFrom restrictions. Attackers can modify QQBot streaming configuration outside intended admin policy by reaching the affected command without non-wildcard allowlist entry requirements. |
| unbounded_spsc is an "unbounded" extension of bounded_spsc_queue. In versions 0.2.0 and prior, sender::send pointer-as-value transmute causes OOB read and fake-Arc drop under TX/RX race. At time of publication, there are no publicly available patches. |
