| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Unauthenticated REST disclosure of certain content items in Apache Allura.
This issue affects Apache Allura: through 1.19.1.
Users are recommended to upgrade to version 1.20.0, which fixes the issue. |
| Improper Authentication vulnerability in Apache Camel Platform HTTP Main component.
This issue affects Apache Camel: from 4.8.0 before 4.22.0.
The camel-main embedded HTTP server can protect its endpoints with JWT authentication, configured through authenticationEnabled together with the JWT keystore properties. JWTAuthenticationConfigurer.buildJwtOptions returned null when neither jwtIssuer nor jwtAudience was configured, and the caller then skipped the JWTAuthOptions.setJWTOptions call entirely, so the Vert.x JWTAuth instance was built from the keystore alone. The result was that inbound tokens were checked only for signature and expiry: the iss and aud claims were not validated at all. Nothing signalled this - the server started normally and reported no warning - so a deployment configured the documented way silently enforced less than the operator believed it had enabled, and the component documentation itself presented signature and expiry checking as the default with issuer and audience as an optional extra. Both the application server and the management server were affected, because the omission was in each of the two configureAuthentication paths. Any unexpired token signed by any key the configured keystore trusts was therefore accepted, regardless of which issuer minted it or which audience it was intended for. How far that reaches depends on the trust set of the keystore: where the signing key belongs to a shared or multi-tenant identity provider, a token legitimately issued for an entirely different audience is accepted, while a keystore holding a dedicated signer narrows it to reuse of tokens minted for other services within the same trust domain. The jwtIssuer and jwtAudience options did not exist before 4.21.0, so on earlier releases there was no supported way to have these claims enforced at all.
Users are recommended to upgrade to version 4.22.0, which fixes the issue. From 4.22.0 the server refuses to start when a JWT keystore is configured but neither jwtIssuer nor jwtAudience is set, naming the properties involved, and a deployment that genuinely wants signature and expiry validation only must say so explicitly with the new jwtAllowMissingIssuerAndAudience option, which defaults to false. This behaviour is fixed only on 4.22.0. The 4.14.9 and 4.18.4 releases do not change the default: they add the jwtIssuer and jwtAudience options so that operators on those maintenance lines can enforce the claims by configuration, and an installation that upgrades to 4.14.9 or 4.18.4 without also setting at least one of those two properties is still accepting any unexpired token signed by a trusted key. Users on 4.14.x or 4.18.x should therefore upgrade to 4.14.9 or 4.18.4 and then set jwtIssuer, jwtAudience, or both. Releases from 4.8.0 up to and including 4.21.x offer no way to enforce these claims and should be moved to a version that does. Independently of version, restrict the JWT keystore to the smallest possible trust set - ideally a signer dedicated to this service rather than a shared identity-provider key - and where a gateway already validates issuer and audience in front of the server, ensure it cannot be bypassed.
Notes:
The JIRA ticket: https://issues.apache.org/jira/browse/CAMEL-24281 refers to the various commits that resolved the issue, and has more details.
The fail-closed guard could not be backported. The jwtIssuer and jwtAudience options were themselves only introduced in 4.21.0 by CAMEL-23525, so on camel-4.18.x and camel-4.14.x there was nothing an operator could set to satisfy the requirement and the guard would have broken every JWT deployment on those branches with no remedy available. |
| An unauthenticated remote peer can crash any NIOWebSocket-based server (including Vapor and Hummingbird) with a single 11-byte frame sent after a completed WebSocket handshake, dropping all active connections until the process restarts. This vulnerability is addressed in swift-nio version 2.101.0. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: byd - synchronize timer deletion before freeing private data
byd_disconnect() uses timer_delete() before freeing the driver's private
data. This does not wait for a running byd_clear_touch() callback, which
dereferences the private data and its psmouse pointer. A callback racing
with disconnect can therefore access the private data after it has been
freed. The timer can also still be re-armed by byd_process_byte() while
the disconnect is in progress.
Use timer_shutdown_sync() before freeing the private data: it waits for
a running callback and turns any later re-arm attempt into a no-op. |
| An issue in the with_argv function (/unistd/mod.rs) of relibc commit 61f42d allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: gw: acquire ethernet header only after skb realloc
The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer
behind the skb. Variables which were pointing to the old buffer need to be
reassigned to avoid an use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
net: enetc: fix potential divide-by-zero when num_vsi is zero
For i.MX94 series, all the standalone ENETCs do not support SR-IOV, so
pf->caps.num_vsi is zero. This leads to a divide-by-zero in
enetc4_default_rings_allocation() when distributing rings among PF and
VFs.
Division by zero is undefined behavior in C. On ARM64, the UDIV/SDIV
instructions silently return zero rather than raising an exception, so
the issue does not cause a visible crash. However, relying on this
behavior is incorrect and poses a cross-platform compatibility risk.
Add an explicit check for num_vsi == 0 and return early after the PF's
rings have been configured. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Take dma_resv lock before dma_buf_unpin() in release path
dma_buf_unpin() requires the caller to hold the exporter's dma_resv
lock:
void dma_buf_unpin(struct dma_buf_attachment *attach)
{
...
dma_resv_assert_held(dmabuf->resv);
...
}
iopt_release_pages() calls dma_buf_unpin() without taking that lock,
so every iommufd_ioas_destroy()/iommufd_ioas_unmap() that releases
the last reference on a DMABUF-backed iopt_pages triggers a WARN.
This was hit while running tools/testing/selftests/iommu/iommufd:
WARNING: drivers/dma-buf/dma-buf.c:1137 at dma_buf_unpin+0x62/0x70
RIP: 0010:dma_buf_unpin+0x62/0x70
Call Trace:
<TASK>
dma_buf_unpin+0x62/0x70
iopt_release_pages+0xe4/0x190
iopt_unmap_iova_range+0x1c7/0x290
iopt_unmap_all+0x1a/0x30
iommufd_ioas_destroy+0x1d/0x50
iommufd_fops_release+0x93/0x150
__fput+0xfc/0x2c0
__x64_sys_close+0x3d/0x80
do_syscall_64+0x65/0x180
</TASK>
Take the dma_resv lock around dma_buf_unpin() in iopt_release_pages(),
matching the iopt_map_dmabuf() convention. dma_buf_detach() acquires the
reservation lock internally, so it must remain outside the locked region. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_nat: reject unsupported target families
xt_nat SNAT and DNAT target handlers assume IP-family conntrack state
is present and can dereference a NULL pointer when instantiated from an
unsupported family through nft_compat. A bridge-family compat rule can
therefore trigger a NULL-dereference in nf_nat_setup_info().
Reject non-IP families in xt_nat_checkentry() so unsupported targets
cannot be installed. Keep NFPROTO_INET allowed for valid inet NAT
compat users and leave the runtime fast path unchanged.
[ The crash was fixed via
9dbba7e694ec ("netfilter: nft_compat: ebtables emulation must reject non-bridge targets"),
so this patch is no longer critical.
Nevertheless, NAT is only relevant for ipv4/ipv6, so this extra
family check is a good idea in any case. ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/util: don't read __page_2 for order-1 folios in snapshot_page()
snapshot_page() currently reads __page_2 after checking nr_pages > 1, but
it should only do so when nr_pages > 2.
If an order-1 folio is allocated at the end of a vmemmap section,
__page_2 will not exist and reading it will cause a fault.
During DLPAR memory remove on a 22 TB ppc64le LPAR, snapshot_page() oopsed
on the page isolation path while reading an order-1 folio's __page_2 from
an adjacent absent section (unmapped vmemmap).
Fix this to avoid reading memmap that doesn't exist (e.g., a vmemmap
hole). |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Fix missing mem scrub at clear key import in cca_clr2cipherkey()
The helper function _ip_cprb_helper() uses internal buffer memory for
building and processing CPRBs. After use this buffer was never
scrubbed which could lead to leaving for example clear key material in
memory which could be exposed via tricky reuse of this same memory.
Extend the _ip_cprb_helper() function with another parameter 'scrub'
used to steer scrubbing of this buffer. So now the caller has the
opportunity to decide if scrubbing is needed or not.
Extend the clear key to secure key token import process in function
cca_clr2cipherkey() to tell the helper function from above to scrub
the cprb buffer when the clear key value is part of the request data.
Add explicit scrubbing on return from function cca_clr2cipherkey() for
the random EXOR buffer and the cprb buffer.
Overall this cleans the internal used buffer in case of clear key
import to prevent sensitive data to get exposed. |
| An issue in the JsonSanitizer.sanitize() component of OWASP json-sanitizer v1.2.3 allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| Vulnerability in the Oracle Customer Care product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Customer Care. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in Oracle Customer Care, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Customer Care accessible data as well as unauthorized access to critical data or complete access to all Oracle Customer Care accessible data. CVSS 3.1 Base Score 8.7 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:C/C:H/I:H/A:N). |
| Vulnerability in the Oracle SDP Number Portability product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle SDP Number Portability. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle SDP Number Portability accessible data. CVSS 3.1 Base Score 7.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N). |
| Vulnerability in the Oracle SDP Number Portability product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows high privileged attacker with logon to the infrastructure where Oracle SDP Number Portability executes to compromise Oracle SDP Number Portability. While the vulnerability is in Oracle SDP Number Portability, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle SDP Number Portability accessible data as well as unauthorized read access to a subset of Oracle SDP Number Portability accessible data and unauthorized ability to cause a partial denial of service (partial DOS) of Oracle SDP Number Portability. CVSS 3.1 Base Score 7.3 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:L/I:H/A:L). |
| A maliciously crafted SVG file, when parsed through Autodesk 3ds Max, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process. |
| A maliciously crafted ABC file, when parsed through Autodesk 3ds Max, can force an Out-of-Bounds Write vulnerability. A malicious actor may leverage this vulnerability to cause a crash, cause data corruption, or execute arbitrary code in the context of the current process. |
| A maliciously crafted SVG file, when parsed through Autodesk 3ds Max, can force a Memory Corruption vulnerability. A malicious actor can leverage this vulnerability to execute arbitrary code in the context of the current process. |
| A maliciously crafted FLT file, when parsed through Autodesk 3ds Max, can force an Out-of-Bounds Write vulnerability. A malicious actor may leverage this vulnerability to cause a crash, cause data corruption, or execute arbitrary code in the context of the current process. |
| Server-Side Request Forgery (SSRF) in Avro SerDe schema resolution in Apache Hive before 4.2.1 allows an authenticated remote attacker with CREATE TABLE privilege to cause the Hive server to fetch an attacker-controlled URL when resolving the avro.schema.url table property on an Avro table that is subsequently queried. This can expose cloud instance metadata, internal network services, or local server files to the Hive process identity. Users are recommended to upgrade to version 4.2.1, which fixes this issue.
Attacker access requirements:
* Network access to HiveServer2 / Metastore: required (remote attacker model).
* Valid Hive authentication: required.
* CREATE TABLE (or equivalent) privilege: required, so the attacker can set avro.schema.url in table properties.
* SELECT privilege on the malicious table: not required for the creator, who can typically query their own table; any other user granted SELECT can also trigger the fetch.
* Write access to the table LOCATION: not required; the attack uses the schema URL, not the data path.
* Admin / superuser privileges: not required; an ordinary authenticated user with DDL rights is sufficient.
* External tables enabled: typically required in practice, and enabled by default in most deployments.
Detection guidance:
* Inspect metastore / Hive table metadata for Avro tables whose avro.schema.url uses unexpected schemes such as http, https, file, or ftp, or points at link-local / cloud metadata addresses (for example 169.254.169.254) or other internal hosts.
* Review HiveServer2 and Metastore logs around CREATE/ALTER TABLE and queries against Avro tables for schema-resolution failures or outbound fetches of avro.schema.url.
* Correlate CREATE TABLE / ALTER TABLE activity that sets avro.schema.url with subsequent SELECT activity on the same table, especially when the URL target is unusual for schema distribution.
* On cloud deployments, check instance / VPC flow logs and metadata service access logs for unexpected requests from Hive host identities shortly after Avro DDL or query activity. |
