| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In multiple functions of bluetooth_cco.cc, there is a possible use-after-free due to a race condition. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| In trusty_dputc of generic-arm64-smcall.c, there is a possible out-of-bounds write due to a race condition. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| In multiple locations, there is a possible time-of-check to time-of-use due to a race condition. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| In multiple locations, there is a possible use-after-free due to a race condition. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: reject accept queue add unless BT_LISTEN
New sk should not be added to parent socket accept queue after last
l2cap_sock_cleanup_listen() has run in l2cap_sock_teardown_cb() and
state set to BT_CLOSED, as that can result to UAF on dereferencing the
dangling parent reference.
l2cap_sock_new_connection_cb() may race with parent l2cap_chan teardown,
due to chan->state accessed without consistent locking:
[Task 1] [Task 2]
l2cap_sock_release(parent) l2cap_connect
l2cap_sock_shutdown pchan = l2cap_global_chan_by_psm
l2cap_chan_lock(pchan)
l2cap_chan_close
l2cap_sock_teardown_cb
pchan->state = BT_CLOSED
l2cap_chan_unlock(pchan) ------> l2cap_chan_lock(pchan)
l2cap_new_connection
l2cap_sock_new_connection_cb
l2cap_chan_lock(pchan) <-------- l2cap_chan_unlock(pchan)
l2cap_sock_kill(parent) /* bt_sk(sk)->parent dangling */
Fix by adding check for sk_state == BT_LISTEN after acquiring sk lock in
l2cap_sock_new_connection_cb(). Add lock_sock() around sk_state writes
where missing, to avoid data races.
Although the data races on pchan->state should be fixed too, this
defensive sk_state check probably makes sense in any case. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: avoid divide by zero in rt6_multipath_rebalance
rt6_multipath_rebalance() calculates the total eligible nexthop weight
in one pass and programs upper bounds in a second pass. Since
RTM_NEWROUTE is RTNL-free, a concurrent
ignore_routes_with_linkdown update can make the first pass return zero
while the second sees an eligible nexthop, causing
rt6_upper_bound_set() to divide by zero.
UBSAN: division-overflow in net/ipv6/route.c:4845:17
Oops: divide error: 0000 [#1] SMP KASAN NOPTI
rt6_upper_bound_set() net/ipv6/route.c:4845
rt6_multipath_rebalance()
fib6_add_rt2node()
ip6_route_multipath_add()
inet6_rtm_newroute()
Skip upper-bound calculation when the first pass reports a zero total.
This respects the lock-free performance considerations here and solves
insecure scenarios. |
| Race condition in WebAppInstalls in Google Chrome prior to 153.0.8010.47 allowed a remote attacker to spoof UI elements via a crafted HTML page. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-vf: fix workqueue and netdev race in probe/remove
Initialize the VF workqueue before register_netdev() so ndo_set_rx_mode
does not queue work on a NULL workqueue. Unregister the netdev before
destroying the workqueue, and add proper probe error cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: use wq_has_sleeper() in rds_cong_map_updated()
rds_cong_map_updated() runs after a peer's congestion map has been
rewritten (by rds_tcp_cong_recv() and rds_ib_cong_recv(), or the
clear-all in the loopback and IB send-completion paths). It bumps
rds_cong_generation and then checks waitqueue_active() on
map->m_waitq and on rds_poll_waitq to decide whether anyone needs
waking. atomic_inc() carries no ordering and waitqueue_active() is a
plain load, so nothing orders the map and generation stores before
the wait queue reads. The waiters do the mirror image: rds_cong_wait()
adds itself to m_waitq and then tests the port bit, and rds_poll()
registers on rds_poll_waitq and then reads the generation. That is
the store-buffering pattern described above waitqueue_active() in
include/linux/wait.h - the updater can observe an empty wait queue
while the waiter still observes the port as congested, and no wake-up
is issued.
rds_cong_wait() is an interruptible sleep with no timeout, so a
sender blocked on a congested port stays blocked until the next
congestion update from that peer arrives or a signal is delivered.
A poll() waiter misses the map-updated notification the same way.
Use wq_has_sleeper(), which is waitqueue_active() preceded by the
required full barrier, as rds_tcp_state_change() already does for
the same pattern. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Do not skip lock checks for single-byte ranges
check_lock_range() uses inclusive ranges. Its callers pass the end
offset as start + length - 1, so start == end represents a valid
single-byte range rather than an empty range.
The start == end shortcut therefore skips mandatory byte-range lock
checks for one-byte reads, writes, copychunk operations and one-byte
truncate ranges. A conflicting lock covering that byte is not checked
and the operation is allowed to proceed.
Remove the shortcut. The truncate size == inode->i_size case is already
handled by only calling check_lock_range() when the new size differs
from the current file size. |
| Paymenter is a free and open-source webshop solution for management of hosting services. Prior to 1.5.7, app/Livewire/Services/Upgrade.php::doUpgrade() relies on Service::upgradable to check for a pending service upgrade and later executes $credit->increment('amount', abs($price)) without DB::transaction or lockForUpdate() spanning those operations. An authenticated customer with an active downgradable service can submit concurrent downgrade requests that each observe no pending upgrade, create separate upgrade records, and increment the same account credit balance, producing multiple spendable refunds for one downgrade. This issue is fixed in version 1.5.7. |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: netc: fix period truncation and potential divide-by-zero in PEROUT
The max_period bound in net_timer_enable_perout() was computed as:
max_period = (u64)NETC_TMR_DEFAULT_FIPER + integral_period;
which exceeds U32_MAX when integral_period > 0 (e.g. 0x100000002 for
the default 333333333 Hz clock). A period_ns that passes this check but
exceeds U32_MAX is then silently truncated when stored into the u32
struct netc_pp::period field.
A truncated value of zero can reach netc_timer_set_perout_alarm(), where
the local u32 period variable would also be 0, causing a divide-by-zero
in roundup_u64(delta, period) whenever the stime < min_time branch is
taken (which always happens for a start time of {0, 0}).
Additionally, netc_timer_enable_periodic_pulse() and
netc_timer_enable_fiper() both compute:
fiper = pp->period - integral_period;
A zero pp->period results in an unsigned wraparound to 0xFFFFFFFD,
mis-programming the FIPER hardware register.
Fix all three issues by capping max_period at NETC_TMR_DEFAULT_FIPER
(0xFFFFFFFF). This ensures that any period_ns passing the range check
fits in a u32 without truncation, so the stored value is always valid
and non-zero. The accepted range is reduced by integral_period ns
(typically only a few nanoseconds), which is negligible in practice. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: arp/nd proxy: fix reading neigh ha
Currently neigh ha address is read directly, but that can result in
torn/partial reads if the neigh is being updated. Use neigh_ha_snapshot
to take a stable snapshot of the address. |
| In the Linux kernel, the following vulnerability has been resolved:
net: kcm: Hold RCU read lock while running BPF parser
kcm_parse_func_strparser() calls bpf_prog_run_pin_on_cpu() which
prevents CPU migration, but does not establish an RCU read-side
critical section. Consequently, BPF map operations can trigger
WARN_ON_ONCE(!bpf_rcu_lock_held()) when called from the KCM strparser
program.
Hold the RCU read lock while running the program. |
| In the Linux kernel, the following vulnerability has been resolved:
null_blk: serialize configfs attribute stores with the lock
The NULLB_DEVICE_ATTR _store takes no lock: apply_fn attributes
(submit_queues, poll_queues) get dev->NAME written again after apply_fn
returns, outside its lock; APPLY=NULL attributes are entirely lockless.
configfs only serializes stores per-open-file, so concurrent stores on
separate fds race.
For apply_fn attributes, once one store's apply_fn has reconfigured the
hardware, a second (losing) store can still overwrite dev->NAME
afterwards. This leaves dev->submit_queues out of sync with the live
queue count, which is later caught by the WARN_ON_ONCE() in
null_map_queues().
For !apply_fn attributes, power_store()'s null_add_dev() validates and
builds the device under "lock" but only sets CONFIGURED afterwards. A store
slipping in during this window can change a field mid-setup -- for example,
zone_nr_conv can be pushed above nr_zones after it has already been
clamped, leading to an out-of-bounds dev->zones[] access.
Take "lock" in the macro around the apply_fn call, the CONFIGURED test and
the field write, and move it out of nullb_apply_submit_queues()/
nullb_apply_poll_queues() so both paths are covered once. This serializes
stores with power_store's setup and with each other. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/erdma: Hold CQ references when processing EQ events
EQ handlers look up CQs from dev->cq_xa and invoke CQ completion or
error callbacks outside the xarray lock. erdma_destroy_cq() can erase the
CQ from the xarray and free its queue buffer and doorbell record while a
previously scheduled EQ handler is still using the CQ.
Add a CQ refcount and take a reference under the xarray lock with
refcount_inc_not_zero(). Remove the CQ from the xarray before dropping
the destroy-path reference, then wait for in-flight EQ users before
releasing CQ resources. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disallow bpf_{g,s}etsockopt() in cgroup UNIX getname hooks
_bpf_setsockopt() and _bpf_getsockopt() call sock_owned_by_me() for
full sockets, so these helpers expect the socket lock to be held.
BPF_CGROUP_UNIX_GETPEERNAME and BPF_CGROUP_UNIX_GETSOCKNAME run BPF
programs without acquiring the socket lock. A program attached to
either hook can therefore trigger the sock_owned_by_me() warning by
calling bpf_setsockopt() or bpf_getsockopt().
Disallow bpf_setsockopt() and bpf_getsockopt() for CGROUP_UNIX_GETPEERNAME
and CGROUP_UNIX_GETSOCKNAME. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: serialize oplock close with pending break ownership
close may abort an in-flight oplock break while another breaker already
holds an opinfo reference. Releasing pending_break wakes that waiter, but
without serializing the close transition with bit acquisition it can become
a new break owner through the test_and_set_bit() fast path. It can then
overwrite OPLOCK_CLOSING with OPLOCK_ACK_WAIT and continue a break for
a dying opinfo.
Make OPLOCK_CLOSING terminal once the opinfo is removed from the inode
list. Serialize that transition, pending_break acquisition, and
OPLOCK_ACK_WAIT setup with an opinfo state lock. A breaker which loses
the race releases its ownership and returns -ENOENT. Explicitly wake
pending_break waiters during close so they can observe the terminal state.
Also prevent ACK and timeout paths from replacing OPLOCK_CLOSING with
OPLOCK_STATE_NONE. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: serialize resident iomap reads with mrec_lock
ntfs_read_iomap_begin_resident() walks the MFT record through
ntfs_attr_lookup() -> ntfs_attr_find() without taking ni->mrec_lock,
while ntfs_attr_record_resize(), ntfs_make_room_for_attr() and
ntfs_resident_attr_record_add() memmove() the same base_ni->mrec buffer
under that lock. map_mft_record() only takes a reference and does not
serialize, so the reader can observe torn attribute length and offset
fields while a writer is relocating the records.
KCSAN reports the race between the mmap read fault path and both link()
and unlink():
BUG: KCSAN: data-race in ntfs_attr_find / ntfs_attr_record_resize
write to 0xffff888100af1018 of 4 bytes by task 96 on cpu 1:
ntfs_attr_record_resize+0xd2/0x130
ntfs_attr_record_rm+0xad/0x530
ntfs_delete+0x224/0x640
ntfs_unlink+0x14d/0x280
vfs_unlink+0x157/0x520
read to 0xffff888100af1018 of 4 bytes by task 95 on cpu 0:
ntfs_attr_find+0x104/0x5b0
ntfs_attr_lookup+0x39c/0x10c0
ntfs_read_iomap_begin_resident+0xc6/0x230
ntfs_read_iomap_begin+0x5d/0xa0
iomap_iter+0x2e2/0x6e0
iomap_read_folio+0x147/0x2a0
ntfs_read_folio+0x108/0x170
filemap_read_folio+0x35/0x100
filemap_fault+0x993/0x1000
value changed: 0x00000250 -> 0x000001f0
The address is mrec + 0x18, i.e. mft_record.bytes_in_use, and the change
is the 96 bytes of one $FILE_NAME attribute being removed.
Keep base_ni->mrec_lock from the resident read iomap lookup through
iomap_end(). This protects both the attribute walk and the subsequent copy
from iomap->inline_data, which points into the MFT record. The non-resident
path is left alone: ntfs_lookup() already holds the directory inode's
mrec_lock when it reads an index folio through read_mapping_folio(), and
taking the lock in the shared wrapper deadlocks there with recursive locking
on mrec_lock. The comment above the read_mapping_folio() call in
fs/ntfs/dir.c notes the same hazard.
The seek path uses the same lookup helper but does not dereference
iomap->inline_data. Release the lock before returning from that path,
whereas the regular read path records base_ni in iomap->private and releases
the lock from its iomap_end() callback.
Tested with a reproducer that faults in a 16-byte resident file while
another thread runs link()/unlink() on it. Before: 40 KCSAN reports in
about one second. After: no reports in 180 seconds over 206,090 read
iterations and 423,540 link/unlink cycles. A PROVE_LOCKING build shows no
lockdep splat with the same reproducer running for 60 seconds. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: fix RXDMAD_C buffer recycling race
The RXDMAD_C buffers come from the RRO data queues' page pools, which are
bound to a different NAPI, so the direct page-pool recycle used here could
race the owning NAPI; take the non-direct path as is already done for WED
RX queues. |
