| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Allocation of Resources Without Limits or Throttling vulnerability in elixir-mint mint allows a remote HTTP server to exhaust memory on the client host and cause a denial of service.
Two HTTP/1 response-parser states accumulate server data without any cap. In lib/mint/http1.ex, decode_status_line/4 stores the unconsumed data in conn.buffer when the status line is incomplete, and decode_body/5 does the same for an unterminated chunk-extension line. Both wait for a CRLF the server never has to send, and conn.buffer is prepended to every subsequent socket message. The :max_header_list_size budget is wired only into decode_headers/5 and decode_trailer_headers/4, so neither of these states is covered by it. A malicious server, or one reached through an attacker-controlled redirect or a fetched URL, streams bytes indefinitely until the BEAM node is killed by the operating system out-of-memory handler. The chunk-extension variant is reached after a valid status line and a complete, valid header section, so an intermediary inspecting only headers sees an ordinary 200 response.
This issue affects mint: from 0.1.0 before 1.10.0. |
| Inefficient Algorithmic Complexity vulnerability in elixir-mint mint allows a remote HTTP server to exhaust CPU on the client host and cause a denial of service.
parse_hex_prefix/2 in lib/mint/http1/parse.ex folds each hex digit of a chunked response's chunk-size field into an arbitrary-precision accumulator with acc * 16 + digit and imposes no limit on the digit count. Because the accumulator grows without bound, the multiplication is not constant time and one pass over N digits costs O(N squared). handle_data/2 prepends conn.buffer and re-parses from the start on every socket message, so a server that dribbles the digits out in small packets makes the client pay that cost repeatedly. A run of roughly 512,000 hex digits costs over ten seconds of CPU in a single pass, measured on stock defaults. The parser reaches this state after a valid status line and a complete, valid header section, so an intermediary inspecting only headers sees an ordinary 200 response.
This issue affects mint: from 1.9.3 before 1.10.0. |
| IBM Langflow OSS 1.0.0 through 1.11.2 Langflow could allow an authenticated attacker to write arbitrary files to the server due to improper input validation in the SaveToFileComponent. The application constructs local file paths using attacker‑controlled input without sufficient sanitization when handling requests to the /api/v1/run/{flow_id} endpoint. An attacker with low‑privileged authenticated access (such as a valid API key or user session) can supply crafted path values, including absolute paths or path traversal sequences, allowing arbitrary file writes to locations writable by the Langflow process. Successful exploitation may lead to unauthorized file creation or modification, potentially resulting in further compromise depending on the deployment environment. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: avoid NULL deref of conn in iso_conn_big_sync()
iso_conn_big_sync() drops the socket lock to call hci_get_route() and
then re-acquires it, but dereferences iso_pi(sk)->conn->hcon afterwards
without re-checking that conn is still valid.
While the lock is dropped, the connection can be torn down under the
same socket lock: iso_disconn_cfm() -> iso_conn_del() -> iso_chan_del()
sets iso_pi(sk)->conn to NULL (and the broadcast teardown path can also
clear conn->hcon on its own). When iso_conn_big_sync() re-acquires the
lock and reads conn->hcon, conn may be NULL, causing a NULL pointer
dereference (hcon is the first member of struct iso_conn).
This path is reached from iso_sock_recvmsg() for a PA-sync broadcast
sink socket (BT_SK_DEFER_SETUP | BT_SK_PA_SYNC), so the dropped-lock
window can race with connection teardown driven by controller events.
Re-validate iso_pi(sk)->conn and its hcon after re-acquiring the socket
lock and bail out if the connection went away, as already done in the
sibling iso_sock_rebind_bc(). |
| IBM Langflow OSS 1.0.0 through 1.11.2 allows remote authenticated attackers to bypass localhost-only MCP configuration installation by spoofing X-Forwarded-For: 127.0.0.1 header, enabling arbitrary writes to IDE config files (~/.cursor/mcp.json, etc.). |
| IBM Netezza Software 11.3.0.3 through Interim Fix 002 has operations that are performed without validating bucket ownership using the ExpectedBucketOwner parameter. This omission may allow a remote attacker to exploit misconfigurations or naming collisions to redirect application requests to an unintended S3 bucket under their control. |
| Openpanel before 2.3.0 contains an unauthenticated full-read server-side request forgery (SSRF) vulnerability in the GET /tools/site-checker endpoint (apps/api/src/controllers/tools.controller.ts). The endpoint passes a user-supplied url query parameter to fetchWithRedirects() and performs server-side HTTP requests to arbitrary URLs without any SSRF/IP validation. An unauthenticated remote attacker can access cloud instance metadata endpoints, probe internal services, scan internal network ports, and read returned content (status code, page size, timing, and parsed HTML metadata), and leak internal IP addresses (via getIPInfo() to a third party). |
| Grav Admin (getgrav/grav-plugin-admin2) versions <= 2.0.19 contain a stored cross-site scripting vulnerability in the tHtml() function (src/lib/stores/i18n.svelte.ts), which substitutes untrusted parameters such as usernames into translation templates before parsing the result as markdown. Grav's server-side username validation (DataUser::isValidUsername) blocks filesystem-dangerous characters but not <, >, ", or ', allowing an attacker to register a username containing an HTML payload. When an administrator views a UI surface that renders the username through tHtml()—such as the two-factor force-disable confirmation prompt or the 'page is locked' editor notice—the payload executes in their authenticated session. Fixed in 2.0.21. |
| Traefik versions before v2.11.55 contain an authentication bypass vulnerability in the digestAuth middleware where unknown usernames receive an empty secret instead of rejection. Attackers can compute a valid digest response using the empty secret and arbitrary credentials to bypass authentication on any digestAuth-protected route without a valid username or password. |
| Peppermint through 0.5.5 contains an authorization bypass vulnerability in the GET /api/v1/auth/user/:id/logout endpoint that allows authenticated attackers to delete sessions for any user by supplying arbitrary user IDs. Attackers can forcibly log out any user including administrators by calling the logout handler with another user's ID, since the endpoint performs no authorization checks to verify the caller owns the target account. |
| Missing Authorization vulnerability in Cascadia Web Services MountDev AI MCP Connector for WordPress allows Exploiting Incorrectly Configured Access Control Security Levels.
This issue affects MountDev AI MCP Connector for WordPress: from n/a through 1.6.5. |
| A vulnerability has been found in D-Link DNS-340L 1.01B04. Affected by this vulnerability is an unknown functionality of the file /cgi-bin/addon_center.cgi of the component Add-On Center. Such manipulation of the argument f_name/f_url/f_flag/f_login_user leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. |
| A weakness has been identified in itsourcecode Online Medicine Delivery System 1.0. Affected by this vulnerability is the function doupdateimage of the file /customer/controller.php?action=photos of the component Customer Controller. Executing a manipulation of the argument photo can lead to unrestricted upload. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. |
| Unauthenticated SQL Injection in GeoDirectory <= 2.8.174 versions. |
| Unauthenticated Server Side Request Forgery (SSRF) in LiteSpeed Cache <= 7.9 versions. |
| Unauthenticated Broken Access Control in WPFunnels <= 3.12.13 versions. |
| R2R through 3.6.6 contains a SQL injection vulnerability that allows unauthenticated attackers to inject SQL predicates into the chunks search query by manipulating the filter key parameter in the retrieval search endpoint. Attackers can exploit the direct interpolation of filter keys into the SQL WHERE clause without parameterization or escaping to perform time-based and boolean-based data exfiltration from the application database. |
| R2R through 3.6.6 contains a stacked SQL injection vulnerability that allows unauthenticated attackers to execute arbitrary SQL statements by manipulating the index name parameter in the vector index creation endpoint. The index name is interpolated directly into a CREATE INDEX statement via string formatting without identifier quoting or allowlist validation, enabling arbitrary DDL and DML execution through semicolon-separated statements under the PostgreSQL superuser account. |
| Authorization bypass through user-controlled key in Azure Cosmos DB allows an authorized attacker to perform spoofing over a network. |
| Medplum is a developer platform that enables development of healthcare apps. In Medplum versions 4.1.10 through 5.1.6, the /oauth2/register endpoint could return the client_secret of preconfigured OAuth clients defined via the defaultOAuthClients server configuration when a matching redirect_uri was provided. This issue has been patched in version 5.1.7. |
