| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A heap-buffer-overflow read vulnerability was found in libaom, the reference AV1 codec implementation. A missing bounds check in the SVC (Scalable Video Coding) layer ID control function allows setting a spatial_layer_id exceeding the configured number of layers. This causes an out-of-bounds heap read of approximately 40,728 bytes when computing a layer context array index. An attacker who can influence SVC encoder parameters in a network-facing service could exploit this for information disclosure (heap content leak) or denial of service (segmentation fault from hitting unmapped memory). |
| An arbitrary address write vulnerability was found in libaom, the reference AV1 codec implementation. A missing bounds check in the SVC (Scalable Video Coding) layer ID control function allows an attacker to inject an arbitrary pointer into the cyclic refresh map field via crafted image pixel values. The encoder then writes approximately 1,200 bytes at the attacker-controlled address. This is fully deterministic and does not require a separate information leak. An attacker who can supply frames to a network-facing libaom encoder with SVC enabled could exploit this for denial of service or potential code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: fix chan ref leak in l2cap_chan_timeout() on !conn
__set_chan_timer() takes a l2cap_chan reference via l2cap_chan_hold()
before scheduling the delayed work. The normal path in
l2cap_chan_timeout() drops this reference with l2cap_chan_put() at the
end, but the early return when chan->conn is NULL skips the put,
leaking the reference.
Add the missing l2cap_chan_put() before the early return. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: cypress_m8: fix memory corruption with small endpoint
Make sure that the interrupt-out endpoint max packet size is at least
eight bytes to avoid user-controlled slab corruption or NULL-pointer
dereference should a malicious device report a smaller size. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tcpm: validate VDO count in Discover Identity ACK handlers
Properly validate the count passed from a device when calling
svdm_consume_identity() or svdm_consume_identity_sop_prime() as the
device-controlled value could index off of the static arrays, which
could leak data. |
| A malicious LDAP server, which a Thunderbird user is configured to query for address-book autocomplete, can stash arbitrarily large amounts of attacker-supplied data into the Thunderbird LDAP client until it crashes due to memory exhaustion. This vulnerability was fixed in Thunderbird 152.0.1 and Thunderbird 140.12.1. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: mt6359: fix unchecked return value in mt6358_read_imp
In mt6358_read_imp(), the variable val_v is passed to regmap_read()
but the return value is not checked. If the read fails, val_v remains
uninitialized and its random stack content is subsequently reported
as a measurement result.
Initialize val_v to zero to ensure a predictable value is reported
in case of bus failure and to prevent potential stack data leakage.
This also satisfies static analyzers that might otherwise flag the
variable as used uninitialized. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/migrate_device: fix pgtable leak in migrate_vma_insert_huge_pmd_page
When migrate_vma_insert_huge_pmd_page() jumps to unlock_abort due
to a PMD check failure, the pgtable allocated earlier via
pte_alloc_one() is never freed, causing a memory leak.
Added free_abort label to release the pgtable in error path. |
| A vulnerability was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. The affected element is the function cgi_check_rsync_rw of the file /cgi-bin/remote_backup.cgi. The manipulation of the argument ip results in command injection. The attack can be executed remotely. The exploit has been made public and could be used. |
| A flaw has been found in itsourcecode Courier Management System up to 1.0. Affected by this vulnerability is an unknown functionality of the file /index.php. Executing a manipulation of the argument page can lead to cross site scripting. It is possible to launch the attack remotely. The exploit has been published and may be used. |
| In the Linux kernel, the following vulnerability has been resolved:
uio: uio_pci_generic_sva: fix double free of devm_kzalloc() memory
uio_pci_sva allocates struct uio_pci_sva_dev with devm_kzalloc() in
probe(), but then calls kfree(udev) both on the probe() error path
(label out_free) and again in remove().
Because devm_kzalloc() allocations are devres-managed and are freed
automatically when the device is detached (including after a failing
probe() and during driver unbind), the explicit kfree() can lead to a
double free.
If probe() fails after devm_kzalloc(), the error path frees udev and
devres cleanup will free it again when the core unwinds the partially
bound device. On normal driver removal, remove() frees udev and devres
will free it again when the device is detached.
This issue was identified by a static analysis tool I developed and
confirmed by manual review. Fix by removing the manual kfree() calls
and dropping the now-unused label. |
| A weakness has been identified in geex-arts django-jet up to 1.0.8. Affected is an unknown function of the component OAuth Handler. Executing a manipulation can lead to cross-site request forgery. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix mm_struct reference leak in aie2_populate_range()
aie2_populate_range() jumps back to the again label without calling
mmput(mm), leaking a reference to the mm_struct.
Add the missing mmput() before jumping to again. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: mxuport: fix memory corruption with small endpoint
Make sure that the bulk-out endpoint max packet size is at least eight
bytes to avoid user-controlled slab corruption should a malicious device
report a smaller size. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: digi_acceleport: fix memory corruption with small endpoints
Add the missing bulk-out buffer size sanity checks to avoid
out-of-bounds memory accesses or slab corruption should a malicious
device report smaller buffers than expected. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: composite: fix integer underflow in WebUSB GET_URL handling
The WebUSB GET_URL handler in composite_setup() narrows
landing_page_length to fit the host-supplied wLength using
landing_page_length = w_length
- WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH + landing_page_offset;
If wLength is smaller than WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH the
unsigned subtraction wraps, and the subsequent
memcpy(url_descriptor->URL,
cdev->landing_page + landing_page_offset,
landing_page_length - landing_page_offset);
ends up copying close to UINT_MAX bytes from cdev->landing_page into
cdev->req->buf. KASAN reports a slab-out-of-bounds in composite_setup
on the kmalloc-2k gadget_info allocation, and FORTIFY_SOURCE traps the
memcpy as a 4294967293-byte field-spanning write into
url_descriptor->URL (size 252).
A USB host can reach this from a single SETUP packet against any
gadget that has webusb/use=1 and a landingPage configured.
Handle the small-wLength case before the math: when the host requested
fewer bytes than the URL descriptor header, only the header is
meaningful and no URL bytes need to be copied. Setting
landing_page_length to landing_page_offset makes the existing memcpy a
no-op and leaves the descriptor returned to the host unchanged for all
larger wLength values. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Fix data-race on iso_pi fields in hci_get_route calls
iso_connect_bis(), iso_connect_cis(), iso_listen_bis(), and
iso_conn_big_sync() call hci_get_route() using iso_pi(sk)->dst,
iso_pi(sk)->src, and iso_pi(sk)->src_type without holding lock_sock().
These fields may be modified concurrently by connect() or setsockopt()
on the same socket, resulting in data-races reported by KCSAN.
Fix this by snapshotting the required fields under lock_sock() before
calling hci_get_route().
BUG: KCSAN: data-race in memcmp+0x45/0xb0
race at unknown origin, with read to 0xffff8880122135cf of 1 bytes
by task 333 on cpu 1:
memcmp+0x45/0xb0
hci_get_route+0x27e/0x490
iso_connect_cis+0x4c/0xa10
iso_sock_connect+0x60e/0xb30
__sys_connect_file+0xbd/0xe0
__sys_connect+0xe0/0x110
__x64_sys_connect+0x40/0x50
x64_sys_call+0xcad/0x1c60
do_syscall_64+0x133/0x590
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: check num_entries in GEM_OP GET_MAPPING_INFO
kvcalloc(args->num_entries, sizeof(*vm_entries), GFP_KERNEL) at
amdgpu_gem.c:1050 uses the user-supplied num_entries directly without
any upper bounds check. Since num_entries is a __u32 and
sizeof(drm_amdgpu_gem_vm_entry) is 32 bytes, a large num_entries
produces an allocation exceeding INT_MAX, triggering
WARNING in __kvmalloc_node_noprof(), causing a kernel WARNING,
TAINT_WARN, and panic on CONFIG_PANIC_ON_WARN=y systems.
Add a size bounds check before we invoke the kvzalloc() to
reject oversized num_entries early with -EINVAL.
(cherry picked from commit 1fe7bf5457f6efd7be60b17e23163ba54341d73d) |
| The bpost-shipping-platform WordPress plugin before 3.2.3 does not properly sanitize a parameter before using it in a SQL query during WooCommerce order submission, allowing unauthenticated attackers to perform time-based blind SQL injection on stores running this bpost-shipping-platform WordPress plugin before 3.2.3. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: mediatek-gen3: Prevent leaking IRQ domains when IRQ not found
In mtk_pcie_setup_irq(), the IRQ domains are allocated before the
controller's IRQ is fetched. If the latter fails, the function
directly returns an error, without cleaning up the allocated domains.
Hence, reverse the order so that the IRQ domains are allocated after the
controller's IRQ is found.
This was flagged by Sashiko during a review of "[PATCH v6 0/7] PCI:
mediatek-gen3: add power control support". |
